Used Aks 202 for sale (2,271)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A Ksdjwu D Unepfx Ab Tslp PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. Kodpfswu Dbusx Ab Tolp By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: diesel, tank capacity: 700 l, color: beige, power: 322.15 kW (438.00 HP), output current: 591 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 328 kW (445.96 HP), nominal power (apparent): 410 kVA, continuous power: 269 kW (365.74 HP), continuous power (apparent): 370 kVA, total length: 4,463 mm, total width: 1,606 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator DW 370 DO2 15 AK14A PRP power: 296 kW / 370 kVA ESP power: 328 kW / 410 kVA Engine: Doosan P158LE-1 Emission stage: 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40 1S/4 Ksdjwu Ectepfx Ab Tolp Voltage: 400 V Voltage regulator: DSR1 Control panel: DSE 7320 Battery charger: 5 ampere Type: Canopied unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (700 L) and vibration dampers • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only Please note that these units are not approved for mobile use in accordance with current EU regulations. The units are sold as B-grade goods. B-grade means the units may have visual imperfections such as flash rust or rust on the housing. These do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and corresponding condition of the units.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes Kjdpfxjxyupks Ab Tslp 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Kledpfx Asfbr S Rsb Top • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 1.5 mm steel Klsdpjyrrg Ssfx Ab Tep Weight: approx. 300 kg

Condition: used, Dimensions (LxWxH): 1084x996x1782mm Brand: FRIMA (Rational) Model: FSCC WE 202 Type: Combi oven (steam / convection) Manufacture: Germany Protection rating: IPX5 Use: Professional kitchens (restaurant, hotel, canteen) 20 levels for GN 2/1 or 40 levels for GN 1/1 trays Production capacity: 300 to 500 meals/day Steam: 30°C – 130°C Hot air (convection): 30°C – 300°C Combined steam + hot air: 30°C – 300°C Voltage: 400V Power: 65.3kW Weight: 370kg Main functions - roasting - steaming - grilling Ksdpfx Abjyu Id Es Tolp - braising - baking / pastry - regeneration (finishing) Connections Water pressure: 150 – 600 kPa (1.5 – 6 bar) Water inlet: R 3/4 Smart features - SelfCookingControl system - Automatic cooking by food type - 5 fan speeds - Humidity control - Automatic cleaning - Core temperature probe - Cooking program memory

Condition: excellent (used), mileage: 310,536 km, power: 110 kW (149.56 HP), first registration: 03/2022, fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, total length: 7,070 mm, total width: 2,230 mm, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), navigation system, power assisted steering, = Additional options and accessories = - Passenger airbag - Driver airbag - Audio controls on the steering wheel - Third brake light - Electrically operated front windows - Climate control/monitoring - Height-adjustable steering wheel - Front center armrest - Multifunction steering wheel - Radio/CD player - Electrically adjustable side mirrors Kledpoyu N Hbsfx Ab Tep - Central locking with remote control = Further information = General Information Number of doors: 2 Registration number: VPG-76-B Technical Information Number of cylinders: 4 Engine displacement: 1,950 cc Unladen weight: 2,886 kg Maintenance APK (Technical inspection): valid until 03.2027 Condition Technical condition: very good Visual condition: very good Damages: none Number of keys: 2

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: E22SH15072467033, This is a Rational SCC 202 WE electric combi-steamer from the premium manufacturer Rational. This combi-steamer is the XXL format and accommodates 20 x 2/1 GN or 40 x 1/1 GN containers. The unit is from the year 2015. It has undergone a comprehensive inspection in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in finding a certified Rational customer service provider anywhere in Germany. Are you looking for a specific Rational device type? Ask us – we have access to a comprehensive range of used and new equipment. We offer professional advice for all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding labor and installation costs - High-quality branded equipment at fair prices - Professional overhauling/inspection and thorough cleaning Klsdpfx Ajynzxcob Top - Flexible shipping or self-collection - Expert advice before and after purchase - Provision of operating manuals, wiring diagrams, and spare parts - Safety inspection according to DGUV V3 This combi-steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the unit independently determines (for 7 applications: meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing) the ideal cooking path, detects product size, loading quantity, and product-specific requirements. Technical data: Dimensions (W x D x H): approx. 1084 x 996 x 1782 mm Minimum door opening for transport (W x H): 1145 x 1900 mm Electrical connection: V: 400 / kW: 65.5 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SH15072467033 Year of manufacture: 2015 Condition: Used, comprehensively serviced, fully functional Further details: - 3 modes in combi-steamer operation: Steam (30°C to 130°C), Hot Air (30°C to 300°C), Combination (30°C to 300°C) - Core temperature probe - Hand shower with automatic return - 8.5 inch color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free grease separation system - Automatic start time preselection - 7 cleaning programmes for unattended cleaning – including overnight - Adjustable 3-level steaming, from 30°C to 260°C - 5 programmable proofing stages - USB interface - Seamless, hygienic cooking chamber with rounded corners - Halogen cooking chamber lighting - Meals per day: 300-500 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior arrangement For questions, advice, or an on-site visit, please contact us by phone during our opening hours: Monday to Friday, 09:00 – 13:00 and 14:00 – 17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Klsdpfx Aetuzqpjb Top Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm

Condition: excellent (used), mileage: 534,062 km, power: 537 kW (730.12 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: semi-automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 7,250 mm, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, parking heater, power assisted steering, retarder, soot filter, spoiler, traction control, trailer coupling, - Alarm - Aluminum fuel tank - Roof spoiler - High beam - Low-noise - Speed limiter - Tipping hydraulics - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Air suspension - Air horn - Particulate filter - Radio/CD - Reversing camera - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Heated windshield automatic - Toolbox Klodpsyt It Dofx Ab Top - Power take-off (PTO) SCANIA S730 V8 NGS | 8X4 | ​​Heavy Duty | 534,062 km | 2020 | Hydraulics | Retarder | Full air suspension | Sliding fifth wheel | King of the road | Leather seats | Seat heating/cooling | Stand-alone climate control | Navigation system | Reverse camera | Fridge | Sleeper cab | Air conditioning | ACC | Cruise control | Semi-automatic transmission | Euro 6-D | TÜV/MOT/APK 02-2027 | Belgian truck *Heavy-duty truck direct from the Scania factory* Chassis number: YS2S8X40002169225 EXPORT Truck transport: Austrian transit license plates with insurance for 21 days + €550 Shipping by sea: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to Zeebrugge port + €400 More about the truck: Video of the truck (YouTube): More about Geerts Trucks & Trailers: YouTube channel Geerts Trucks & Trailers: Instagram Geerts Trucks & Trailers: Facebook Geerts Trucks & Trailers: TikTok Geerts Trucks & Trailers: LinkedIn Geerts Trucks & Trailers: Follow us and subscribe to our channel to see our latest vehicles! No rights can be derived from possible errors in this ad. Geerts Trucks & Trailers always strives to provide accurate information. Technical information Number of cylinders: 8 Engine displacement: 16,353 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Axle brand: GOODYEAR; Left tire tread: 70%; Right tire tread: 70% Front axle 2: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Axle brand: GOODYEAR; Left tire tread: 70%; Right tire tread: 70% Rear axle 1: Tire size: 315/80R22.5; Dual tires; Differential lock; Max. axle load: 13,000 kg; Axle brand: ALBOURGH; Left inner tire tread: 50%; Left outer tire tread: 50%; Right inner tire tread: 50%; Right outer tire tread: 50%; Reduction: Outboard planetary axles Rear axle 2: Tire size: 315/80R22.5; Dual tires; Differential lock; Max. axle load: 13,000 kg; Axle brand: DEBICA; Left inner tire tread: 50%; Left outer tire tread: 50%; Right inner tire tread: 50%; Right outer tire tread: 50%; Reduction: Outboard planetary axles Weights Kerb weight: 12,828 kg Payload: 29,052 kg Gross vehicle weight: 41,880 kg Interior Upholstery: Leather Maintenance, history and condition APK (MOT/roadworthiness): Inspected until 02/2027 Technical condition: very good Visual condition: very good...

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: E22SH15072467031, This listing is for a Rational SCC 202 WE electric combi-steamer, manufactured by the premium brand Rational. This XXL-format combi-steamer offers capacity for 20 x 2/1 GN trays or 40 x 1/1 GN trays. The unit is from the year 2015 and has undergone a comprehensive inspection in our in-house workshop; it is fully operational. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in finding a certified Rational service partner anywhere in Germany. Looking for a specific Rational model? Ask us! We have access to an extensive range of used and new equipment. We are pleased to advise you on all Rational model types, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: • 6 months warranty on electrical parts, limited to replacement of defective parts without installation or removal costs • High-quality branded units at fair prices • Professional refurbishment, inspection, and expert cleaning • Flexible shipping or pickup options • Competent advice before and after purchase • Provision of operating manuals, connection diagrams, and spare parts • DGUV V3 safety inspection This combi-steamer accommodates 20 x 2/1 GN or 40 x 1/1 GN containers. In automatic mode, the oven automatically detects the ideal cooking path, load size, amount, and product-specific requirements for 7 applications (meat, fish, poultry, sides, egg dishes, baked goods, and finishing). Technical data: • W x D x H: approx. 1084 x 996 x 1782 mm • Minimum door opening for transport (W x H): 1145 x 1900 mm • Power supply: V: 400 / kW: 65.3 / Hz: 50/60 • Weight: approx. 351 kg • Serial number: E22SH15072467031 • Year of manufacture: 2015 Condition: Used, freshly inspected, fully functional Further specifications: • Three operating modes in combi-steamer mode: steam (30°C to 130°C), convection (30°C to 300°C), and combination (30°C to 300°C) • Core temperature probe • Retractable hand shower • 8.5" color display with touchscreen • 5 programmable fan speeds • Integrated, maintenance-free grease separation system • Automatic pre-selection of start time • 7 cleaning programs for unattended cleaning, including overnight • Adjustable humidity in 3 stages (30°C to 260°C) • 5 programmable proofing stages • USB interface • Seamless, hygienic cooking chamber design with rounded corners • Halogen chamber lighting • Meals per day: 300-500 Shipping: • Delivery or pickup by arrangement Kljdpfjym Dd Sex Ab Tjp • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Do you have questions, need advice, or wish to view the unit on site? You can reach us by phone during our business hours: Monday-Friday 09:00–13:00 and 14:00–17:00. Sale only according to our General Terms and Conditions (AGB).

Condition: excellent (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms - PLC controller Klodpfjyu R Eljx Ab Tep

Condition: used, material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m Ksdsvuuntopfx Ab Telp SPECIAL DEAL as is where is, WITHOUT putting into operation, in given condition mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min

Condition: like new (used), Offering this pressure reducer for sale Item no.: RS3602021018 5 units available in as-new condition. Price for all: €600. User manual included Shipping possible No returns or warranty. Kodjx Ekruspfx Ab Tslp

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Roland 202 TOB ref 2901 year 1996 impressions – approx. 90 million Rolandmatic dampening Kjdpfxjytutqe Ab Tslp machine available immediately

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Complete automatic URBAN 8 head welding 4 head cleaning line for PVC windows and doors profiles. System consisting of 2 paralel 4-head welding units of AKS 6410 27/25 with 1 automatic unloading and transfer bench TBA-F 26/28-TE 9M on 2 transport bench TBA-F 26/28H to automatic 4-head cleaning unit SV 800/2.5M and 1 final bench. Set of jaws for profiles. Sold due to company closure. Klodpfxjyundre Ab Tjp

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Kjdpfx Asyfhvpeb Telp Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C Kodpfx Abjyhpqts Telp

Condition: used, machine/vehicle number: IC1261, Year of construction: 2017, operating hours: 4,842 h, load capacity: 2,000 kg, lifting height: 3,000 mm, construction height: 1,540 mm, overall weight: 640 kg, enginetype: Electric, manufacturer: Jungheinrich Klodpfx Ajx I Th Rjb Top

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control Klodpfxjw Rz Rqj Ab Tjp

Year of construction: 1991, condition: ready for operation (used), Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible. Kljdpfx Absylbrdo Top

Condition: good (used), functionality: fully functional, machine/vehicle number: 91626925, Year of construction: 2018, operating hours: 1,368 h, load capacity: 135 kg, lifting height: 3,000 mm, fuel type: electric, construction height: 1,385 mm, battery voltage: 24 V, empty load weight: 640 kg, Jungheinrich EKM 202 Vertical Order Picker, Year of Manufacture 2018 Specifications: Jungheinrich EKM 202 Year of manufacture: 2018 Recorded operating hours: 1,368 h Lift height: 3,000 mm Overall height: 1,422 mm Rated capacity: 135 kg Kjdpsxdaidsfx Ab Tslp Service weight: 640 kg Front tyres: Polyurethane Rear tyres: Polyurethane Battery capacity: 160 Ah Battery voltage: 24 V Accessories: Integrated charger. Note: Order picking height: 5,313 mm Standing height: 3,313 mm L: 1,520 mm W: 750 mm H: 1,422 mm

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top Ksdpfx Asykp Dxeb Tslp - Heated stainless steel blades on bottom - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms

Year of construction: 2028, condition: like new (used), Steam convection oven, Rational SCC 202 electric combi oven in excellent condition, fully serviced. * Fits 20 GN 2/1 trays or 40 GN 1/1 * Steam cooking mode from 30°C to 130°C Kjdsylqdcjpfx Ab Telp * Regeneration function * Convection / dry heat: temperature range from 30°C to 300°C, 0–100% maximum humidity * Probe and shower included * Automatic cleaning with tablets, and more...