Used Aks for sale (335)

Condition: used, We offer this used ARI Ds-73+1 Ari ds-73 ks-12. Söderhamn / Ake, year of manufacture unknown. If you have any questions or need more information, feel free to send us a message or call us. Ncodoy Er T Hopfx Akqor

Year of construction: 2006, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Njdpfx Aksyybr Uoqecr Weight: 1,000 kg

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Ncedpoyfhvpofx Akqjr Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Nodsxyupkepfx Akqecr Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm Ncedpfjyu R Elox Akqer - maximum welding length: 2600 mm - support arms - PLC controller

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Ncsdpfow Rz Rqex Akqor Radio remote control

Year of construction: 1991, condition: ready for operation (used), Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible. Nodpfx Ajylbrdokqecr

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top - Heated stainless steel blades on bottom - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms Njdpfxsykp Dxj Akqjcr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, pressure: 7 bar, Complete system consisting of 3 units of AKS 6400 4-head welding machines and 2 units of AKS 6600 4-head welding machines plus 2 units of SV 800/4 CNC weld seam finishing machines, including chip extraction system. Nsdpfsw Etv Aex Akqscr

Year of construction: 2001, condition: ready for operation (used), A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible. Ncjdpew Nykgofx Akqor

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 10000x2500x1600 mm Weight 3300 kg Nsdevz E Anepfx Akqecr Total power requirement 16,2 kw

Year of construction: 1996, condition: good (used), - Output: 15 -30 To/h Ncodjmn I Nbjpfx Akqor - With mechanical variator - Motor for cylinder + spiked roller: 7.5kW 400V 50Hz - With integrated grape crusher AQ 30 - Grape crusher: 2.2kW - Plastic destemming cylinder - Without electrical equipment - Machine in good condition Dimensions: - Length: 2840mm - Width: 1040mm - Height: 1130mm

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm Ncedpex A D Ihsfx Akqjr 1 x Saw Blade Ø500mm Equipped with digital angle setting readout

Year of construction: 1993, condition: repair required (used), Circular saw sharpener Loroch AK Automat year 1993 blade diameter min/max - 80/710 mm graduation 3-25 mm grinding disc type - Borazon grinding disc diameter 200 mm drive motor 0,55 kw working speed 10-45 z/min coolant Njdpfjgtmt Tex Akqscr dimensions 1500×1200 x 2300 mm weight 750 kg

Condition: new, M&S Gruseck GmbH NEW screening baskets from the specialist – 100% MADE IN GERMANY! Screening baskets suitable for the Doppstadt AK series 430, 435, 510, 535, 560, 635, 640, etc. - TOP QUALITY - Various perforations - Short delivery times Ncsdpfx Akjxp Nzmoqsr Many other spare parts also available from stock: - Rear screens - Tailgates - Various impact plates - Wear plates - Scraper floor rails - Hammers - Hammer holders - ... AND MUCH MORE!

Condition: good (used), Year of construction: 2009, Double welding and cleaning line URBAN consisting of 2 four-head welding machines AKS 6910/4 - 30 /40, one with right-hand stop, one with left-hand stop, WINDOWS control, each with a URBAN TBA transport/cooling belt, transverse table with motor for removal of individual elements, URBAN SV 815 cleaning automatic with two heads, with infeed table and rotatable outfeed table, additional station for processing of corner and scissor bearing drillings as well as milling of elements with varying widths, buffer rack with tiltable shuttle table and two additional outfeed tables. Ncedpfxew Niqps Akqer

Year of construction: 2024, condition: new, Universal notching saw; Height 1.100 mm; head +/-180 degrees. Saw stroke 900 mm, blade diameter 500 mm Nodped A Huwofx Akqocr

Condition: excellent (used), Year of construction: 2000, Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working. Nedpfx Akewrpwijqscr

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Njdpfx Aovr U Syskqocr The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station Ncodoxgqvtepfx Akqjr - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE Ncedpfx Aoxn U Rqjkqor AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Condition: used, This listing is for Peak Scientific Nitrogen Generator Corona 1010 + Corona compressor The unit is in full working condition and ready for immediate use Designed to provide a consistent, high-purity nitrogen supply for LC-MS applications. Compact and efficient, the Corona 1010 with integrated compressor ensures reliable performance and reduced reliance on gas cylinders in laboratory environments. Ncedpjy Dp A Aefx Akqor Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 1998, total length: 3,350 mm, total width: 2,180 mm, total height: 2,780 mm, Weight: 9.000 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 230 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 Njdpfxjyrpvks Akqecr - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3350mm x 2180mm x 2780mm (l x w x h) - Transport weight [kg]: 9000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TRADE FAIR MACHINE Hydraulic press brake Type: SPEEDBEND 3100 x 175 t 7-axis CNC (Y1 – Y2 – X – R – Z1 – Z2 – X5) Capacity: 175 t Working length: 3100 mm Clearance between uprights: 2600 mm Throat depth: 410 mm Adjustable stroke: 275 mm Daylight between upper and lower table: 550 mm Working height: 900 mm Approach speed: 180 mm/s Working speed: 10 mm/s Return speed: 190 mm/s Nsdpfx Aksy Ed Euoqocr Motor power: 15 kW Dimensions: 4250 x 2150 x 2800 mm Weight: 9086 kg Equipped with: - Numerical control ER99, graphic 3D simulation with simulation of bending process, tools and machine. - X5 (motorized backgauge finger with +/- 100 mm offset) - Motorized rear backgauge 800 mm - Motorized Wila-type crowning system - Front support arms with T-slot and millimeter scale - Upper and lower tool length - Laser front safety devices mounted on movable brackets with PLC and test procedure at startup in accordance with applicable regulations - Hydraulic oil included in delivery 2-year warranty For complete description and technical data, see

Condition: good (used), Year of construction: 2006, functionality: fully functional, Used CNC 4-meter press brake from Ermaksan Nsdpfjyw Swisx Akqocr Model: CNC AP 40200 Capacity: 4100 x 200 tons 1 set of complete tooling Delem DA66w graphical CNC control CNC-controlled Y1, Y2, X, and R axes Manual crowning