Used Painting for sale (3,804)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ Djdpfefz U Nbsx Abhoup At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Dsdpfoflk Awex Abhjup Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Duodpfx Abofz U Tiehsp Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Djdpfswu Aa Njx Abhoup Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 16 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price Dedpfoxpilxsx Abhjup To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Paint mist extraction DIT-FNA 20/18 - with upper and side guide plates - 2.7 kW Djdpfx Absyrnyheheup - 380 Volt

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Dusdpfxeyqynus Abhop External reference: 7615

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone. Dujdpfxex H Rhrj Abhjp

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm Dodpsx Uz Rmjfx Abhsup - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: new, - Mobile design - high degree of separation, Dedpfx Aju T Hrpjbhjup high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, Automatic door painting line comprising: Automatic door destacker, door by door Automatic painting robot with spraying Door stacker onto trolleys Dusdpfx Absyrr Dkehjp Door dimensions: lengths from 2000 to 2600 mm widths from 730 to 1030 mm

Condition: used, Paint mist extraction system, approx. width 1200 mm, height 2200 mm, extraction motor mounted on top Djdpfx Aoyl Ippobheup

Condition: used, Year of construction: 2018, functionality: fully functional, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Dusdpfx Ajxzpvuobhjp

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Dedpfxevvizks Abheup Storage location: Garbsen

Condition: used, Trolley 12 levels Dujdpfxjwbtvuo Abhep - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm Dedpfou Afu Rex Abheup 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system Dsdjumvtqopfx Abheup - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Year of construction: 2026, condition: used, functionality: fully functional, Passenger Car Paint and Drying Booth DURST / CMC Concord – 26,000 m³/h – modernized – ready for operation Manufacturer: CMC / DURST Paint Systems Dodpfx Asyrxy Sebheup Model: Concord Cabin year of manufacture: 1998 Modernization: 2016 For sale is a professional passenger car paint and drying booth from our bodywork and paint workshop. The unit is still in daily use and can be fully tested on-site. The sale is solely due to a new investment in modern paint systems. Technical Data Internal cabin dimensions: Length: approx. 7,000 mm Width: approx. 4,000 mm Height: approx. 3,000 mm External dimensions: Length: approx. 7,100 mm Width: approx. 4,100 mm Height: approx. 3,800 mm Airflow Capacity Supply air: 26,000 m³/h Exhaust air: 26,000 m³/h Air changes: approx. 310 air changes per hour Fans: Radial fans Motor output: 7.5 kW each Heating system: Gas surface burner Heating output: approx. 260–300 kW Maximum drying temperature: 80°C Fuel Originally natural gas Currently converted to LPG (liquefied petroleum gas) Electrical Data Connected load: approx. 20 kW 400 V / 50 Hz Equipment Spray and drying mode Automatic switch-over between spraying / drying Frequency converter for fans Temperature control 0–100°C Ceiling filter pressure monitoring Ceiling filter system Floor grid extraction Automatic run-on timer Operating hours counter Burner safety shut-off Explosion-proof emergency button Control cabinet with digital display Complete supply and exhaust units Fresh air and exhaust air ducts Condition Unit is fully functional Still in operation Inspection and functional test possible at any time Delivery / Dismantling Unit can be inspected by arrangement Dismantling and transport by purchaser Forklift assistance can be provided if required Location Germany 35582 Wetzlar

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Sale or lease of the entire site or individual plant components Dusdeyknlujpfx Abhep - Over 50 mixing and stirring tanks (stainless steel) - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems - Tank farm with tanker and container unloading - Filling lines for small and large containers - High-bay warehouse with approx. 2,300 pallet spaces - Container cleaning system - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: good (used), Year of construction: 2023, This paint booth is being sold on behalf of a customer and can be inspected under power. Djdpfxjylm U Rj Abheup

Condition: used, !!! Attention: Only the conveyor system is offered here !!! Available for sale is a floor conveyor system for a wheel rim coating line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight rails) - Carriages with mounts for automotive rims - Rotating rail: the rim rotates on this rail during the coating process to ensure even paint application Total length approximately 150 meters Maximum part size: 550 mm diameter Maximum part height: 400 mm The system is suitable for both wet paint and powder coating processes. No control unit is included with the system. The system has been dismantled and packed in crates. Inspection is possible by appointment. Duedpfx Ajyrffhsbhep The system must be serviced before being put into operation. Two additional systems are also available. These are suitable for baking/curing in an oven.

Condition: used, Year of construction: 2009, - Details: - └ Description: Exclusive Makor - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MKR30029343 - Rail present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dodpfjwnh I Eex Abheup Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 209981-002-2018, pressure (max.): 448 bar, WIWA Airless 28064 Dsdpfxoyqx Uts Abhsup Delivery rate DH: 153 cm³ Transmission ratio: 64:1 Max. material temperature: 80 °C Max. operating pressure: 448 bar Max. inlet pressure: 7 bar Weight: 80 kg Serial no.: 209981-002-2018 Further information available on request.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm Dsdpfx Aeyrr Rqobhsup - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Djdpfsulc S Rjx Abhsup