Used Painting Robot for sale (6,623)

Condition: like new (used), Year of construction: 2011, operating hours: 45 h, functionality: limited functionality, Paint finishing line for window coating with scanner, 25 trolleys, 6-axis painting robot with teach-in mode, and spray booth with paint recovery system via cooling. Extraction wall equipped with two extraction collectors, 800x3000xD550. The line has operated only 40 hours due to a change in production profile. Ready for recommissioning and internal equipment replacement. Option to purchase carousel and robot separately. Rcodpoywaqqsfx Afgjh

Condition: like new (used), Year of construction: 2007, operating hours: 690 h, functionality: fully functional, machine/vehicle number: F-87459, input voltage: 400 V, type of input current: three-phase, This robot is a 'lazy dog'. Despite its age, it has just 70 hours of operating time. It served as a test robot and was not actually used in production. Nevertheless, it has received regular maintenance from Fanuc. Its condition is almost as new. It can be mounted on the floor, wall, or ceiling. The machine has been inspected and has undergone a trial run. If interested, the robot can be viewed at our facility. Delivery and initial commissioning are also possible. Rsdpow Tl S Dsfx Afgjch

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. Rcodpstu H Avsfx Afgeh The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. Rsdpstu Hpqefx Afgech However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor Rcsdjznd Skspfx Afgsh - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: used, Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system manufactured in 2019. This automated coating system was used for series production coating of components and comes from an industrial production facility. The used painting line includes, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification system. Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Technical data & scope of supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture (main system): 2019 Previous operation: 3-shift operation (condition appropriate for age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of manufacture 2006–2012) Rsdpjzka Sfefx Afgjch Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal post-treatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to the in-house maintenance department, it is at the state of the art. Electrical & mechanical: Mostly in a condition appropriate for age or good condition. Cybersecurity data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. "Everything from one source: We will gladly offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2026, operating hours: 7,000 h, condition: used, We offer this used CML Finishing Ghost C Master CML Ghost 6 axis robot painting line, year of construction 2018. Including: 1pcs Master CML Finishing Ghost C robot 1pcs Slave CML Finishing Ghost C robot 1pcs 3D Scanner with dimensions and depth scanners 2pcs Control cabinets with monitors 1pcs Graco Premier 800 pump 5pcs Graco G36W05 pumps Rcedpfxoyx Sv Uo Afgoh 1pcs Belmeko Spray booth with exhaust and return air system If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Rcsdpjit Rrvsfx Afgeh

Condition: good (used), GR6100 robot with hollow wrist Hollow wrist and axis 3 for routing paint hoses Rjdoyxmt Ujpfx Afgech Flange for 3 spray guns Light barrier/reading barrier Connection for automatic color change

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. Rcsdstu H Hcspfx Afgjh We have two of them. We would also bring the device to us from Frankfurt.

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 15 kg, arm reach: 2,000 mm, controller manufacturer: Chiehey, VR tracking principal. Calibrate a tracked teaching receivers on paint gun, record the operator's motion, then replay the path with the robot. Validate the coating result and save program for reuse. Redpfoz E N Nmex Afgech

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Rcsdpfx Ajxw Ux Hefgeh Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: CA2451010, overall weight: 33 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, controller manufacturer: Techman Robot, controller model: Control box AC TM12X (100-240 VAC), teach pendant manufacturer: Techman Robot, teach pendant model: TM Screen modèle TP01, input voltage: 230 V, type of input current: DC, warranty duration: 4 months, Equipment: documentation/manual, TECHMAN ROBOT collaborative robot, model TM12S-MX (S series) – NEW, in original packaging, never used. Under warranty until [date]. Lot contents: - One TM12S-MX robotic arm, manufacturer reference 9TMABM130-01-004-A000-140300000, serial number CA2451010 - One TM12S-MX control cabinet, manufacturer reference 9TMABM130-01-004-A000-140300000, serial number CC2451010 - One TM Screen control panel, model TP01, manufacturer reference 9TM0B0000-04-019-A00Z0, serial number TP2435019 - One additional power supply MX version: control cabinet powered by direct current (24–60 VDC) – suitable for mobile robots (AMR) and embedded applications; no integrated AI camera on the wrist (option to add external cameras: up to 2 GigE 2D cameras, or 1 GigE 2D camera + 1 3D camera). Technical specifications (manufacturer's datasheet, S series): - Payload: 12 kg - Reach: 1300 mm - Arm weight: 33 kg - 6 rotary axes – J1, J2, J4, J5, J6: ±360°; J3: ±162° - Joint speeds: J1, J2: 130°/s; J3: 210°/s; J4, J5: 225°/s; J6: 450°/s - Max. speed: 4.5 m/s - Repeatability: ±0.03 mm - DC control cabinet: 8.9 kg - Cabinet I/O: 16 digital inputs / 16 digital outputs, 2 analog inputs / 2 analog outputs - Tool I/O: 3 digital inputs / 3 digital outputs (DO_0/AI, DO_1/RS485-, DO_2/RS485+) - I/O power supply: 24 V 2.0 A (cabinet), 24 V 1.5 A (tool) - Arm protection rating: IP65 - Typical power consumption: 400 W - Power supply: 24–60 VDC - Operating temperature: 0–50 °C - Cleanroom: ISO Class 3 - Interfaces: 2× COM, 1× HDMI, 3× LAN, 2× USB 2.0, 4× USB 3.0 - Communication: RS-232/RS-422/RS-485, Ethernet, Modbus TCP/RTU (master & slave); optional PROFINET, EtherNet/IP, EtherCAT, CC-Link - Programming: TMflow (flowchart), TMscript (script), TMcraft (developer); manual guidance teaching Rcodpfx Aez Hz Haofgeh - Certifications: TÜV ISO 13849-1, ISO 10218-1, ISO/TS 15066; SGS UL1740, CAN/CSA Z424-14 (R2019); CE, NSF/ANSI 169 (optional), SEMI S2 (optional) Applications: pick & place, machine loading, light palletizing, assembly, integration on AMRs. Optional training: Gessmann can provide training on how to use the robot for an additional €2,800. Visit and pick-up by appointment.

Condition: excellent (used), Robot Coupe R60 VCM with 3 blade set up Rcjde Agvmqspfx Afgjh Machine has been changed to variable speed by Schnieder Inverter includes process timer Machine is in good running order

Condition: excellent (used), Robot Coupe R23 VCM 2 speed machine Redpfxo Agvm Uj Afgech 3 blade set up Tipping discharge Process timer In good running order

Condition: like new (used), Year of construction: 2020, operating hours: 96 h, As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible. Rcsdpfeq A S Dfox Afgjh

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Hyundai / Hanwha TechM Year of production: Rjdpfxer Iy Nko Afgsch 2007 Maximum load: 200kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Lifting capacity: 20kg Rjdpfxsr Aka Ae Afgjch Reach: 1726mm

Year of construction: 2009, condition: refurbished (used), This floor standing unit is designed to help you create fruit coulis and purées, vegetable mousses, sauce bases, bisques and fish soups by separating pips, stones, fibres and carcasses without crushing them. The continuous feed system makes it easy to use and a great time saver. Hopper : Continuous feeding of prepared ingredients for increased productivity. Perforated basket :Your products fall inside the basket where they are strained. End product ejection chute:The ready to use pulp is ejected here and is free of pips, stones, skin, fibres and bones. Waste ejection chute: skins, pips, stones, tails, bones, shells, fibres… Paddles: Paddle assembly rotating at 1500 rpm to extract maximum pulp and juice. Production of Pulp: 120 kg per hour Rjdpfxez R Id Ij Afgsch Electrics: Single Phase 900 W Rpm: 1500 Dimensions: 1 030 x 400 x 860 Weight: 45kg Available: 1 week for Preparation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A Rcedpfx Afozzpuwsgoh - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, For sale: A Robopac Master Robot pallet wrapper in excellent condition. This mobile wrapper is ideal for efficiently and safely wrapping pallets of various sizes. The machine features a user-friendly control panel and operates on batteries, providing flexibility in use. Perfect for warehouses and production environments looking for a reliable and robust solution for pallet stabilization. The machine is well-maintained and ready for immediate use thanks to the new batteries. The charger is built-in. The wrapper was manufactured in 07-2020. Comes with an invoice. We can also supply wrapping film. For more information or a video of the wrapper, please feel free to contact us. Trade-in possible: Trade-in of a (defective) pallet wrapper is negotiable. Also, check out my other listings or contact me to see which wrappers we have in stock. Rodpfx Afe Agwxzjgech Keywords: pallet wrapper, film wrapper, wrapping machine, pallet wrapping machine, wrap machine, robot wrapper, wrapping robot, robot wrapper, wrapper, film wrapper.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: CR690, overall weight: 1,350 kg, load capacity: 100,000 kg, Electric Chassis System Robot 100 Ton Set – OX TBC 100 The self-propelled trolleys offer a high load capacity of 100 tons and a very low height, with the ability to rotate 360°, making it possible to position them under all types of loads and for maneuvering. Motor-driven trolley models with hydraulic lifting cylinders are also available for loading onto vehicles or shelves, offering a speed of up to 5 m/min max. Length - 1602 mm Width - 2019 mm Height - 315 mm Max. load/lifting capacity - 100 tons Rjdpew Taikofx Afgjch Remote control

Condition: ready for operation (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, Complete ABB welding robot system consisting of: Rodpfx Ae Agnp Njfgoch Robot IRB 2400, floor-mounted, with IRC 5 M controller, 2004 Welding equipment Fronius TPS 5000, wire feeder, welding torch, torch cable package Manipulator IRBP 750 K, 2-station rotary table with a center-to-center distance of 2500 mm and a swivel radius of 500 mm. Load capacity per station: 750 kg Light curtain in front of the loading station The system is still in operation and can be inspected. The system still needs to be dismantled. Assistance is possible. The system will be available from the end of November.

Condition: used, Year of construction: 2001, operating hours: 12,790 h, Easy-to-use welding cell equipped with an ABB IRB140 robot and an S4C+ M2000 control system, as well as Fronius TPS welding equipment. A convenient solution for smaller welding projects, with a design that makes it easy to position and move as needed. Only a pallet truck is required to move it. The cell has primarily been used for trial welding and demonstrations. Rcodpfxjz Apzyj Afgjh Specifications: - ABB IRB140 - ABB S4C+ M2000 control system - Fronius TPS welding equipment - Compact design - Suitable for smaller welding projects - Used for trial welding and demonstrations - Easily moved with a pallet truck

Condition: defective spare-parts repository (used), Year of construction: 2002, Robot - Handling - Parts Donor Manufacturer: KUKA Type: KR 200/3 Year of manufacture: 2002 Technical data: Rcsdpfx Aezz S I Tjfgjh - Load capacity: 200 kg The robot has not been tested and is being sold as a source of spare parts. Transport dimensions: approx. L 1.4 m x W 1.2 m x H 1.8 m / Weight: approx. 1,200 kg Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.