Used Robot System for sale (35,917)

Year of construction: 2020, condition: used, Dimensions (WxHxD): approx. 17x14x7.5 m, including 8 AutoStore Robots R5 AS-99188-DDG, Conveyor Ports 5.1-Narrow, 3 Carousel Ports 3.0, 3 Carousel Ports Frames, 1 Grid (loading structure), 1 Guards (upper railing, service platform, stairway, crane, MDF cladding, approx. 387 m³, software, approx. 8,400 storage bins, internal dimension: 603x403x310 mm, with Pick To Light, for details see drawing. ATTENTION!!! The dismantling of the storage system must be completed by the end of May. Gijdpfx Aajyztibe Aer

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Godpfeyx Exvox Aa Aoir

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: H18/X2090/202/00162, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Maximum rotation angle: 350° Maximum rotational speed: 16.8°/s Maximum linear speed: 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Power supply: 1 x 230 V / 16 A Battery capacity: 5.8 – 8.7 kWh Number of laser scanners: 3 Scan plane height: 150 mm Compressed air tank: 0.75 l / 7 bar Gisdpfxsyzyxce Aa Aor Wrist protection rating: IP67 Arm protection rating: IP65 System protection rating: IP20 Average floor surface pressure max.: 10 N/mm² Drive type: Differential drive EQUIPMENT Tool parking station: 4 tools per station Tool changing system: MPS032 Navigation: based on laser scanner data Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Optical and acoustic signals: 4 LED units, storage for up to 16 audio files

Condition: excellent (used), Year of construction: 2017, Welding system with KUKA KR 16 L8 ARC HW welding robot, KRC4 controller, FRONIUS CMT welding machine, KP1-HC2000R1000 positioner, year of manufacture 2017 KR 16 L8 ARC HW welding robot Gjdpfx Aasyv Ex Dj Aeir Serial no.: 867100 Year of manufacture: 2017 Number of axes: 6 Reach: 2015 mm Payload: 8 kg Weight: 240 kg Controller: KRC4 Serial no.: 330800 KP1-HC2000R1000 positioner Serial no.: 152229 TransPuls Synergic 4000 CMT R welding machine Serial no.: 28245624 100% duty cycle: 320 A 60% duty cycle: 365 A 50% duty cycle: 400 A VR7000-CMT 4R/G/W/F++ wire feeder Safety system Torch cleaning station Reference run limit switch – Safe operation RotoLab – Torch angle correction Festo air preparation unit Pneumatic control unit Torch cleaning station

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Giedoyrun Ejpfx Aa Aor Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: reconditioned (used), Year of construction: 2011, compl., overhauled welding robot system incl. robot RT 330 on rotary gallow, Gijdocrtliepfx Aa Ajr control K 5, gasnozzlesensing, seam tracking ( option), mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm warranty: 6 month for material

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Giodpfxowypqls Aa Aer Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Year of construction: 2013, condition: excellent (used), For sale is an automation robot of the brand Yaskawa and the type MH50 together with power cabinet and DX100 control system. The system was built by Krauss Maffei and used on a Netstal injection molding machine to sort parts. Operating manuals for DX100 control and operating and maintenance manuals for MH50 Digital available Technical data MH50: Position Model YASKAWA-MH50 Operating hours: approx. 14.000 Year of construction: 2013 Body: Standing Number of axles: 6 Load capacity: 50 kg repeatability: ±0,07 mm Working range S-axis (rotation): ±180° L-axis (lower arm): +135°, -90° U-axis (upper arm): +251°, -170° R-axis (hand roll): ±360° B-axis (wrist rotation/bend): +125° T-axis (hand rotation): ±360° Maximum speed S-axis: 3.14 rad/s, 180 °/s L axis: 3.11 rad/s, 178 °/s U axis: 3.11 rad/s, 178 °/s R axis: 4.36 rad/s, 250 °/s B axis: 4.36 rad/s, 250 °/s T axis: 6.28 rad/s, 360 °/s Permissible torque R-axis: 216 Nm B axis: 216 Nm T axis: 147 Nm Permissible moment of inertia (GD2/4) Gisdpfx Aon E Nhpsa Asr R axis: 28 kgm2 B axis: 28 kgm2 T-axis: 11 kgm2 Weight approx. 550 kg Dimensions: See pictures On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Year of construction: 2022, condition: used, functionality: unexamined, machine/vehicle number: S352621, S352622, S352623, Deburring system consisting of: 3 robot cells, each equipped with a KUKA robot KR10 1440-2 and deburring spindles, 3 safety enclosures with loading doors (one per robot), 1 hydraulic unit for clamping systems, 3 hydraulic clamping systems. For further details on condition and technical specifications, please refer to the attached appraisal report. Giodpfx Aoyqycxja Aor

Year of construction: 2003, operating hours: 64,363 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-22267, MACHINE DETAILS Godpfx Asyf A E Sja Ajir Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 64,363 h

Year of construction: 2003, operating hours: 59,762 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-26298, MACHINE DETAILS Dimensions & Weight Weight: 182 kg Dimensions (L x W x H): 880 x 660 x 1,150 mm Operating hours: 59,762 h Giodpfx Asyf Apqea Aor EQUIPMENT Robot handheld control device

Year of construction: 1994, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30194.117.0, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 800 x 1,850 mm Weight: 310 kg EQUIPMENT Gsdpoyf Aidefx Aa Aoir Roll bar Cable set Robot hand control unit Control software Logbook

Condition: used, Year of construction: 2001, functionality: fully functional, load capacity: 15 kg, Fully functional waterjet system (manufactured circa 2001) with KUKA KR15 six-axis robot. The system operates with pure waterjet cutting (without abrasive additives) and is currently still in use for processing plastic components. Offline programming, demonstration possible. Includes KMT Streamline pump (15 HP). Complete system with automatic door opening and closing. Contact us if interested! Gsdpfxoyl Niqj Aa Aeir

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Cloos welding robot Qirox QRC 350 year 2016 incl. control unit QC 6 year 2013 C Stand for suspended arrangement of the robot, repainting Cloos Qineo Champ 600 welding machine, wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 2 station indexing table with H frame and WPG 5000 turning devices, take-up weight per station 500 kg, face plate distance 2200 mm, turning radius approx. 500 mm. Table newly painted, all motors overhauled, Arc protection on the indexing table, 2 swing doors, 1 start preselection, 1 light barrier gas nozzle sensor, arc seam detection, point editor System is completely overhauled and serviced before delivery. Pre-acceptance possible in Burbach. Gjdpegz S Twsfx Aa Ajir If ordered at short notice, delivery still possible in 2024.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 29,000 h, Cloos welding robot system consisting of: ROMAT 350 robot with ROTROL II V4 control unit (optionally upgradable to version 2025), gas nozzle sensor, arc seam tracking, point editor, Qineo Puls 600 welding machine (600 A), wire feeder, MRW 510 evo welding torch, torch hose package, mechanical cleaning system, pressure amplifier. 1 L manipulator WPEK 25000, load capacity 2500 kg, turning radius 1500 mm, loading height 945 mm. 1 C stand with vertical slide, travel distance 1500 mm, boom length 2750 mm. Light barrier, start preselection. Giedpfx Ajw Razzea Ajr The system is in excellent condition and was only used for simple TIG welding tasks. Overhauled and serviced prior to delivery.

Condition: excellent (used), Year of construction: 2007, load capacity: 5 kg, arm reach: 704 mm, Fanuc LR Mate 200 iC robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Control system: R-30iA MATE Number of axes: 6 Load capacity: 5 kg Reach: 704 mm Gsdpjqgck Defx Aa Asir Repeat accuracy: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56

Year of construction: 2006, condition: ready for operation (used), A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible. Gijdpfx Ajx U Dxaoa Aor

Condition: excellent (used), Here we offer you a ToX full punched rivet system. ToX full punched rivet system type TZ-VSN The full punch rivet severed all joining and pushes the slug from the joint. TOX PRESSOTECHNIK, supplemented with innovative technology for full self-piercing rivets the specialist for sheet metal connections, his delivery and performance program is a pioneering procedure. The full punch riveting offers an additional mechanical connection of sheet metal, This is for lightweight construction and the combination of hybrid parts and assemblies of great importance. The rivet advancements, forceps, and toolholders are also so universally designed, that full punching rivets with a diameter of 4.0 mm and lengths between 3.3 and 8.1 mm as well as full punching rivets with a diameter of 5.0 mm and lengths between 3.9 and 9.0 mm with TOX - hand pliers as well as with TOX robot pliers flexible can be processed. Type TZ-VSN Pressing force 55KN Total stroke 140 mm Rivet type: Diameter 5 x 4, 6 Connection values Performance: 3,4KW Power supply: 400/15/50-60 V / A / Hz Speed: 200mm / s Web form: 3 p + N + PE Control voltage: 24 V DC Back-up fuse: 25 A Type: TZ-VSN Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax Giedpfx Aaodz Afwo Asr

Condition: excellent (used), Here we offer you a ToX full punched rivet system. ToX full punched rivet system type TZ-VSN The full punch rivet severed all joining and pushes the slug from the joint. TOX PRESSOTECHNIK, supplemented with innovative technology for full self-piercing rivets the specialist for sheet metal connections, his delivery and performance program is a pioneering procedure. The full punch riveting offers an additional mechanical connection of sheet metal, This is for lightweight construction and the combination of hybrid parts and assemblies of great importance. The rivet advancements, forceps, and toolholders are also so universally designed, that full punching rivets with a diameter of 4.0 mm and lengths between 3.3 and 8.1 mm as well as full punching rivets with a diameter of 5.0 mm and lengths between 3.9 and 9.0 mm with TOX - hand pliers as well as with TOX robot pliers flexible can be processed. Type TZ-VSN Gsdpfx Aodz Af Asa Aeir Pressing force 55KN Total stroke 140 mm Rivet type: Diameter 5 x 4, 6 Connection values Performance: 3,4KW Power supply: 400/15/50-60 V / A / Hz Speed: 200mm / s Web form: 3 p + N + PE Control voltage: 24 V DC Back-up fuse: 25 A Type: TZ-VSN Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: excellent (used), Stäubli Measuring Robot Here we offer a very well maintained Stäubli measuring robot. Measuring robotics to measure, analyse and evaluate quality features RobFlow (measuring robotics software) full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical data: Measuring range 0.1 ... 50 m on natural, diffuse reflecting surfaces, 50 m to a maximum of 150 m on reflector panel Linearity ±2 mm (+15°C ... +30°C), ±5 mm (-10°C ... +50°C) Resolution 0,1 mm Repeat accuracy ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C ... +50°C Storage temperature -20°C ... +70°C applications: RobFlow is a modular system, the range of functions of the standard package can be extended by additional Plugins for special tasks as well as customer-specific extensions can be added. With the help of the available functions, the following applications can be implemented, for example: Infotainment tests: Optical and haptic tests Single actuations and path movements Gisdpfsfz Dhtjx Aa Asr straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Wide measuring range due to multiple calibrated Force/torque sensor Easy to [...]

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Gisdpfxsxf Ur As Aa Aor Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: like new (used), functionality: fully functional, machine/vehicle number: C-13-309, overall weight: 900 kg, Take the opportunity to acquire a high-quality used Carat grinding and polishing station: This set consists of a control cabinet and two precise polishing machines, equipped with robotic interface for maximum efficiency. Ideal for professional industrial applications. Suitable robots can be offered separately. • Year of manufacture: 05/2013 • Total height: 240 cm • Operating pressure / max. air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet Gisdpfxouzylhj Aa Ajr

Condition: excellent (used), Year of construction: 2018, Very well maintained Quinto 603. Multiple machines of this type are available. Giedpfx Aaew Exytj Asr

Year of construction: 1999, condition: excellent (used), Fanuc Robot LR Mate 200iB + Fanuc system Gisdpfexr Dbmjx Aa Ajr Robot control unit year of manufacture 2004

Condition: good (used), We sell a used robot grinding machine. The plant is in good used condition. Godsh T Duropfx Aa Aeir Included in the plant are: - 1x KUKA KR30-3 industrial robot - 3x belt grinders - 1x loading table If you have any questions, please do not hesitate to contact us!