Used Robofil 240 for sale (3,331)

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm Lodpfjwzyvhox Abnsac U 350 mm V 220 mm Year 2005

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Lsdpfxsy R Dtcs Abnoac

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Large bobbin kit. Lodpszf Akyjfx Abnoac

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Lajdjylkr Tspfx Abnsc

Condition: good (used), Year of construction: 2011, Load moving system CBM 240 / ST 120 MACH-ID 923 Laodpfewvhrtox Abnec Type: CBM 240 / ST 120 Year: 2011

Condition: new, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other configurations available] - Grid pattern: 5,000 x 6,000 mm - Finished floor height: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard, P6 quality - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanine platforms are expandable in the specified grid as standard. Other sizes and heights available upon request. Our team will be pleased to advise you! Delivery scope: - Columns - Primary and secondary beams - Cross bracing - Flooring - Fastening material Sample prices: 30 m² | Dimensions: 5,000 x 6,000 mm | €2,685.00 net, excl. shipping and VAT 60 m² | Dimensions: 5,000 x 12,000 mm | €4,785.00 net, excl. shipping and VAT 90 m² | Dimensions: 5,000 x 18,000 mm | €6,855.00 net, excl. shipping and VAT 120 m² | Dimensions: 5,000 x 24,000 mm | €8,955.00 net, excl. shipping and VAT 60 m² | Dimensions: 10,000 x 6,000 mm | €4,785.00 net, excl. shipping and VAT 120 m² | Dimensions: 10,000 x 12,000 mm | €8,645.00 net, excl. shipping and VAT 180 m² | Dimensions: 10,000 x 18,000 mm | €12,495.00 net, excl. shipping and VAT 240 m² | Dimensions: 10,000 x 24,000 mm | €16,335.00 net, excl. shipping and VAT Further versions available. Please contact us for more information. Optional accessories: - Guard railing - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing available at extra cost YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MADE-TO-MEASURE MANUFACTURING This mezzanine platform represents an example from our standard range. Of course, we develop and manufacture your storage platform precisely according to your business requirements—tailored to surface area, load-bearing capacity, installation height, and intended application. Our planning department will prepare a customized, non-binding offer tailored to your specifications. Whether new construction, expansion, or modernization of existing systems—we support you with extensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for pick-up. Delivery or shipping is available at additional cost. Additional charges are based on the delivery location and the volume of the shipment and can be requested individually from us. PAYMENT TERMS Lasdpfsxpizaex Abnjc Payment conditions will be agreed upon in the event of an order. The quoted price is the unit/net price, or as stated in the description (plus VAT). You will of course receive an invoice indicating VAT. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, mezzanine platforms, textile racking, as well as machinery for trade, industry, and the trades. We continuously offer attractive used equipment from a variety of manufacturers/brands on favorable terms. If you have any questions, feel free to contact us. ✅ Four wins—the success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Geba HS 240 'long slice' slicer with very low running hours - less than 2,500. Available immediately. Lodpok H H Dyofx Abnsac

Condition: good (used), mileage: 468,473 km, power: 154 kW (209.38 HP), first registration: 03/2003, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: steel, total length: 9,300 mm, total width: 2,550 mm, total height: 3,690 mm, loading space length: 6,550 mm, loading space width: 2,460 mm, loading space height: 2,290 mm, Year of construction: 2003, Equipment: ABS, electric window regulation, power mirror, retarder, tail-lift, trailer coupling, = Additional Options and Accessories = - Heated mirrors Lodpfxozgbdbe Abnoac - Tachograph (driver's card) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Radio/cassette - Reversing camera - Seat cover - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8175 kg, Gross vehicle weight: 18900 kg, Total tank capacity: 280 liters, Trailer coupling, Axle journal pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Winch pulling force: 369 tons, Suspension type: Air suspension, Cab type: Short cab, Tachograph (driver's card), Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Engine power: 154 kW (207 hp), Fuel: Diesel, Euro: 3, Transmission type: Manual, Gears: 8, Clutch pedal, Auxiliary braking system, Retarder brand: Telma, Power steering, ABS, Seat arrangement: 1+1+4, Seat upholstery: Seat cover, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift manufacturer: Dhollandia DHLM.15, Tail lift material: Steel, Tail lift size: 175 x 252 = Additional Information = Axle configuration Tire size: 315/80R22.5 Suspension: Leaf spring suspension Axle 1: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 8 mm; Brakes: Disc brakes Axle 2: Double tires; Tire tread depth left inner: 10 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 9 mm; Brakes: Drum brakes Weights Unladen weight: 8,175 kg Payload: 10,725 kg GVW: 18,900 kg Functional Tail lift: Dhollandia DHLM.15, Rear door, 1500 kg Load platform height: 126 cm Maintenance APK (technical inspection): valid until 11/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • Good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber for professional heat and cold tests in industry, research, development, and quality assurance. The Binder MK series temperature test chambers are particularly suitable for cyclic temperature tests and reproducible tests under defined environmental conditions. The test chamber enables temperature tests in the range of -40 °C to +180 °C and represents an efficient alternative to individual custom solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Laodpsy Nic Hefx Abnec Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x feedthrough Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Optical condition according to pictures Normal storage and signs of wear present Important note: All information has been compiled to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide. Lsdpfx Abew Ixw Aensac

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 08/2027, year of last overhaul: 2026, input frequency: 50 Hz, empty load weight: 1,500 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 32 A, Diosna SPV 240 AF/T spiral mixer Lodpfx Abjy Ac Nmonsac with 2 extendable mixing bowls Dough machine with program control Dough temperature measurement Cover hood with switch ring with timer and 2 speeds Connection 400V, 32A-CEE plug DGUV V3 tested Used machine, refurbished with warranty

Condition: ready for operation (used), Year of construction: 2017, overall weight: 1,650 kg, product length (max.): 4,168 mm, Edgebander manufactured in 2017. This BIESSE Jade 240 features a panel thickness capacity of 10-60 mm and an edge height range of 14-64 mm. It includes a pre-milling unit, glue application unit, and various trimming units for enhanced functionality. If you are looking to get high-quality edge banding capabilities, consider the BIESSE Jade 240 machine we have for sale. Contact us for further details. • Technical data: • Panel thickness: 10–60 mm Ledpezc R E Usfx Abnoac • Edge height: 14–64 mm • Edge thickness (coil): 0.4–3 mm • Edge thickness (solid strips): up to 8 mm • Feed speed: 12 m/min • Minimum workpiece length: 150 mm • Minimum workpiece width at 150 mm length: 85 mm • Minimum workpiece width at 250 mm length: 50 mm • Pneumatic connection: 7 bar • Glue pot capacity: approx. 2 kg • Glue pot heat-up time: approx. 10 min • Dust extraction connections: 100 mm • Standard units: • Pre-milling unit • Glue application unit • End trimming unit • Flush/profile trimming unit • Corner rounding unit • Radius scraping unit • Glue joint scraper • Buffing unit

Condition: used, mileage: 369,514 km, first registration: 12/2015, tire size: 285/70R22.5, axle configuration: 4x2, wheelbase: 5,300 mm, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,500 mm, total width: 2,600 mm, total height: 3,600 mm, Year of construction: 2015, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, tail-lift, = Additional Options and Accessories = - CD player - Spare wheel - Spare key - Speed limiter - Headlights - Stability control - Standard air conditioning - Sun visor - Toolbox - Xenon lights = Further Information = Tire size: 285/70R22.5 Ljdpfx Aoyyh H Eebnjac Brakes: Disc brakes Front axle: Steering; Tire tread left: 60 mm; Tire tread right: 67 mm; Suspension: Leaf springs Rear axle: Twin tires; Tire tread left inner: 45 mm; Tire tread left outer: 50 mm; Tire tread right inner: 42 mm; Tire tread right outer: 64 mm; Suspension: Air suspension Empty weight: 9,295 kg Payload: 5,005 kg gross vehicle weight: 14,300 kg Damage: none

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle SN:384125, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Laedjx Dwqfepfx Abnsc

Condition: ready for operation (used), autotron andron ANC 240 control and display unit,used, small traces of use, 100% functional, scope of delivery according to photos Ledpfxjmgwube Abnsac

Condition: new, Siemens 6SL3224-0BE21-5UA0 Power Module 240 SN: XAJD07-006559 Version D02, unused, 100% functional, scope of delivery as per photos Lasdpfxox Eu D Uo Abnec

Condition: ready for operation (used), Heidenhain UE 240 ID 313502-01 The costs cover only the repair analysis of your component, which you can send to us. After evaluating your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. During the repair process, your component will be completely overhauled and will receive a 3-month warranty from us. Laedpfx Ajy Nq Ausbnjc

Condition: ready for operation (used), Heidenhain UE 240 ID 313502-03 The costs cover only the repair analysis of your component, which you can send to us. After we have inspected your component, you will receive a quotation detailing the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Ledsy Nq A Ijpfx Abnsac

Condition: new, Siemens 6SL3224-0BE23-0UA0 Power Module 240 SN:XAH705-000493, unused, 100% functional, delivery scope as per photos Lsdox Eu Efjpfx Abnoac

Condition: new, GMN TSE 240 cg - SP: 3000-3600-4000-5000 RPM / 37 grinding spindle, shaft diameter: 130mm, front overhang at the thread: 102mm, including test report and installation instructions, new condition: €25,000, unused, 100% functional, scope of supply as shown in the photos. Lajdpsi D U Trsfx Abnjc ATTENTION: Please request the costs for packaging and shipping separately!

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle 384124, unused, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Lodpfxoi Eaams Abnjac

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle 384126, unused, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Ljdji Eaaxspfx Abnjac

Condition: ready for operation (used), Huber Ministat 240 Compact Refrigerated Circulating Thermostat for Laboratory and Industrial Use, SN: 74948/07, used, normal signs of wear, 100% functional, scope of delivery as per photos. Lodpfjx Etu Eox Abnsac

Condition: ready for operation (used), Heidenhain UE 240 ID 313502-02 The costs stated cover only the analysis for repair of your component, which you may send to us. After a thorough inspection, you will receive a detailed quotation specifying the actual repair costs. If you authorize the repair, the analysis fee will be waived. As part of the repair process, your component will undergo a complete overhaul and will come with a 3-month warranty from us. Laedpfx Aey Nq Azjbnjc

Condition: excellent (used), mileage: 697,200 km, power: 177 kW (240.65 HP), first registration: 01/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 6,200 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, loading space length: 8,400 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2012, Equipment: differential lock, tail-lift, Truck Volvo FL7 240 Laodpfozf E A Esx Abnsc First use: 01/24/2012 697,200 km Emissions class 5 Automatic transmission Box-type cargo compartment: Length: 8.4 meters Width: 2.48 meters Height: 2.50 meters Payload: 9,745 kg Total weight: 18,000 kg Air conditioning Trip computer Central locking Electric windows and mirrors Differential lock .... Front tires: +/- 50% Rear tires: +/- 35% Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium