Used Robofil 290 for sale (2,889)

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Gsdpfew Htdpex Aftskf Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg The machine was in use with our customer until recently and is available for immediate delivery.

Condition: excellent (used), Wedge bar chuck (28319) diameter 290 mm Cylindrical 78 mm thread increase 6 mm Weight 54 kg Gjdeiuvumspfx Aftokf

Condition: ready for operation (used), Brinkmann 1SAL902/290+001 submersible pump SN: 001, used, in good condition, 100% functional, delivery as shown in the photos Gkedpfx Asx Eq A Heftof

Year of construction: 2006, condition: ready for operation (used), Screw diameter: 40mm, clamping force: 1000kN, tie bar distance: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, ejector force: 40kN, ejector stroke: 175mm, shot volume: 188cm3, injection pressure: 1530bar. Machine dimensions X/Y/Z: approx. 4300mm/4200mm/2100mm, weight: approx. 3750kg, operating hours: approx. 73000h. Documentation available. An on-site inspection is possible. Gkodpfsx E Adisx Aftef

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Godpfou E E Susx Aftokf Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: reconditioned (used), functionality: fully functional, For sale 290 liter spiral kneader. 180 kg dough capacity. Reversible, 2 timers, fast and slow speed. Perfect condition, reconditioned machine, Italian make. Gkodpfsu Il Twox Aftsf

Condition: good (used), Year of construction: 2009, 520 S 1600 - 290/290 Complete thermoplastic cylinder, 35 mm, highly wear-resistant Complete thermoplastic cylinder, 35 mm, highly wear-resistant, for 2nd injection unit Drive unit with 30 kW motor and 65 l/min pump delivery rate Accumulator module with 64 l storage capacity (max. 230 bar) Selogica direct control system Technology level: accumulator drive Multi-component processing 2nd injection unit 290 vertical Open nozzle 25 mm Open nozzle 35 mm Open nozzle 35 mm for 2nd injection unit Submerged nozzle tip for open nozzle Electrical and hydraulic actuation of NVD in mold for 1st injection unit Electrical and hydraulic actuation of NVD in mold for 2nd injection unit Heating band for open nozzle Heating band for open nozzle for 2nd injection unit Heating/cooling jacket for open nozzle Variable clamping plate set, Ø 125 mm Minimum installation height expanded to 450 mm Blow-out unit 1 with pressure reducer Selection unit incl. connection Ejector pressure P/Q controlled (prerequisite: T2) Core pull 1, parallel movement P/Q controlled, programmable Core pull 2, parallel movement P/Q controlled, programmable Electric core pull control 1 (prerequisite: VE 436/00) Top guard open, increased to safety dimension Start-up inspection hydraulic accumulator Continuous oil cooling and filtration Increased cooling capacity Parting plane device on short supports for 2nd injection unit Nozzle contact force controlled, programmable for 1st injection unit Nozzle contact force controlled, programmable for 2nd injection unit Conveyor belt connection electric via socket combination Emergency stop interface 1 to 24-pole interface, 2-channel Emergency stop interface 2 to 24-pole interface, 2-channel Temperature release up to 450°C and reinforced cylinder heating Basic equipment for control of electric axes Host computer interface ARBURG 8 programmable digital inputs/outputs on terminal strip Interface for mold temperature control unit 20 mA Connection cable for REGLOPLAS temperature control unit Serial USB printer interface External PC keyboard with USB interface Additional floppy disk drive via USB interface CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Holder for PC keyboard with USB connection Injection with mold closed ("flying injection") 3 measurement circuits for mold temperature 15 electric heating control circuits for mold heating Device interface Start-up parameters Post-pressure switching channel 3 on fixed mold plate Interface for colouring unit LSR unit interface via 6-pin Harting connector Interface for colouring unit for 2nd injection unit Interface for vacuum control Vacuum control with vent function Vacuum monitoring via analog signal Vacuum unit 40 m³/h Kit for connecting mold to vacuum valve Interface for flow monitoring for cold runner system Energy monitoring and power consumption display 2 cooling water circuits laid to fixed mold plate 2 cooling water circuits laid to moving mold plate 4 manual cooling circuits Basic equipment for 2nd cooling water distributor (manual) 7 manual cooling circuits for 2nd water distributor Machine-related cooling circuits controlled Equipment package: advanced monitoring Equipment package: advanced movements Gkedpfxoxl Ty Ej Aftef Equipment package: production control Equipment package: optimization / operator aids Equipment package: quality assurance Equipment package: documentation aXw Control ScrewPilot for 1st injection unit aXw Control ScrewPilot for 2nd injection u

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, copy head, radius dresser, disc puller Gjdpfx Aswuz Swjftokf -Puller: Copy head for grinding wheel puller -Dimensions: see photos -Dimensions: 290/230/H170 mm -Weight: 14.1 kg

Year of construction: 2006, condition: excellent (used), Device is functional and was only used for experimental purposes Gkjdpfxoh Im Eqs Aftjf Funnel is included

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 24 mm -Piston tube outside: Ø 86 mm -Stroke: 290 mm -Number: 2x cylinders available Godpjb A Itusfx Aftjkf -Price: per piece -Weight per piece: 12 kg

Condition: used, Signal columns, signal lights, signal lamp, control light, signal light column, light signal alarm system -Manufacturer: Deckma, signal light -Signal lights: 8 pcs, see photos -Signal horn: 2 tones -Dimensions: 450/290/H740 mm -Weight: 8.6 kg Gkedpfx Aot Acxrsftsf

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Gkjdpfx Afov Tv Tnetef -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

Condition: used, Centrifugal fan, chip extraction fan, fan, extraction, chip fan, fan wheel, fan housing -Fan housing: for exhaust fans -Fan mount: Ø 215 mm, bolt circle Ø330 mm -Inlet: Ø465 mm / bolt circle Ø495 mm M8 -Outlet: 200 x 280 mm -Number: 2x housing available -Price per piece -Dimensions: 780/290/H820 mm Gkodpfxelx Nwde Aftsf -Weight: 30 kg/pc.

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Fan: Radial fan, unfortunately without type designation Gjdpfx Asun Dw Heftekf -Voltage: 220/380 V -Speed: 2200 rpm -Fan wheel: Ø 140 x 65 mm -Connection input: Ø 120 mm -Connection output: 90 x 90 mm -Dimensions: 300/290/H250mm -Weight: 6.2 kg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch Gkedpfx Ajd R A E Asftof -2 column punching tool -Recording: Ø 32 mm bolt -Dimensions: 270/290/H325 mm -Weight: 39 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Socket: Ø 30 mm -Motor mounted on guides -Number: 2x motors available Gsdpjb A Nmdjfx Aftokf -1x: right thread -1x: left thread -Price: per piece -Weight: 20 kg/piece

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment via trapezoidal thread Gkjdpfx Afecxuqcstjf -Adjustment range: 295 - 530 mm Quantity: 1 piece -Weight: 9 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Godpfx Aew Ucyuoftjkf Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Year of construction: 2007, operating hours: 37,000 h, condition: ready for operation (used), General Data Measurements width 2810 mm Measurements depth 2600 mm Measurements height 2080 mm Machine weight 4450 kg Main Drive Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1200 mm Workpiece Y 400 mm Workpiece Z 700 mm Workpiece weight 1500 kg Injection Unit Injection pressure 2/4/8/13 bar Godpfx Afsx D I Hwetokf This 3-axis CHARMILLES Robofil 440 CC was manufactured in 2007 and features a robust design with a total system weight of 4450 kg when filled with dielectric. It can handle workpieces up to 1500 kg, with maximum dimensions of 1200 x 700 x 400 mm. Ideal for precision wire EDM processes, this machine offers a comprehensive control system with a TFT 12" screen. If you are looking to get high-quality EDM capabilities consider the CHARMILLES Robofil 440 CC machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, empty load weight: 8,400 kg, Year of construction: 2019, operating hours: 1,643 h, drive type: Diesel, Mini excavator Condition: Ready for operation and fully functional Technical condition: Very good Description: Crawler excavator TAKEUCHI TB 290-2 – - KNICKER – - Year 2019 – - 1,643 operating hours – - hydraulic quick coupler – - MARTIN POWERTILT – - 3 digging buckets 30cm + 60cm + 90cm – - 1 ditch-cleaning bucket 150cm – - 4-cylinder Yanmar TURBO diesel engine 51.6 kW (70 HP) – - AIR CONDITIONING – - rearview camera – - refueling pump – - long reach arm – - excavator in very good condition – - rubber tracks approx. 80% – - Inspection and test digging possible on site – - Affordable delivery options! Quick coupler, buckets, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, Gjdpfx Aox Hmv Seftjkf

Condition: used, mileage: 163,000 km, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, emission class: euro6, loading space width: 2,470 mm, loading space length: 7,400 mm, loading space height: 2,670 mm, Year of construction: 2021, Equipment: ABS, air conditioning, tail-lift, Year of manufacture: 2021 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Tyre profile left: 30%; Tyre profile right: 30% Empty weight: 9.505 kg Carrying capacity: 9.995 kg GVW: 19.500 kg Tail lift: 1500 kg Gsdpfox Hg H Rex Aftjkf Cool unit make: Thermo King Cool unit brand: Thermo King

Condition: used, mileage: 747,671 km, power: 213 kW (289.60 HP), first registration: 09/2011, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 315/80 R22.5, fuel: diesel, wheelbase: 5,600 mm, brakes: engine braking, driver cabin: day cab, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: ABS, cruise control, tail-lift, trailer coupling, = Additional Options and Equipment = - CD player - Electrically adjustable exterior mirrors - Electric windows - Spare wheel - Aluminium fuel tank - Headlights - Alternating current - Toolbox - Central locking Gedpfx Ajx Eklzsftokf = Additional Information = Tyre size: 315/80 R22.5 Brakes: Disc brakes Front axle: Steerable; Tyre tread left: 3 mm; Tyre tread right: 3 mm; Suspension: Leaf suspension Rear axle: Dual tyres; Tyre tread left inner: 8 mm; Tyre tread left outer: 8 mm; Tyre tread right inner: 8 mm; Tyre tread right outer: 8 mm; Suspension: Air suspension Unladen weight: 5,420 kg Payload: 13,580 kg Gross vehicle weight: 19,000 kg Dimensions (L x W x H): 950 x 255 x 330 cm Damages: none

Condition: used, maximum load weight: 13,100 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2016, loading space length: 7,250 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 45 m³, Equipment: ABS, tail-lift, Spier AGL 290 Box Body 45m³ Through-Loading System Tail Lift Ref. No. for inquiries: 0625506 * Body manufacturer: Spier * Type: AGL 290 * Own weight: 4,900 kg * Box body * Through-loading system * ABS * EBS * Duomatic * 2 axles, air suspended * BPW Eco Plus axles * Aluminium underrun protection * Drum brakes Dimensions (Cargo compartment/loading area) Cargo length: 7,250 mm Cargo width: 2,480 mm Cargo height: 2,500 mm Tyres: * Front axle: 385 / 55 R 22.5, air suspended / 40% * Rear axle: 385 / 55 R 22.5, air suspended / 40% Gkjdewvxlkopfx Aftof ----Price: 9,900 EUR + 19% VAT. For further questions, you can reach us at the following numbers: We speak: German, English, French, and ????? Errors, mistakes, and prior sale reserved.

Condition: used, mileage: 313,445 km, power: 217 kW (295.04 HP), first registration: 11/2019, overall weight: 16,000 kg, fuel type: diesel, color: green, axle configuration: 4x2, maximum load weight: 9,180 kg, empty load weight: 6,820 kg, tire size: 285/70 19,5, next inspection (TÜV): 12/2025, wheelbase: 5,300 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 36 m³, loading space width: 2,490 mm, loading space length: 7,500 mm, loading space height: 1,930 mm, Year of construction: 2019, operating hours: 313,445 h, total length: 7,500 mm, tire condition: 50 %, front tire size: 285/70 19,5, rear tire size: 285/70 19,5, Equipment: ABS, air conditioning, cabin, fog lights, sliding door, spoiler, truck registration, Reference number for inquiries: 40391 DAF LF45.250 * Year of manufacture: 2019 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Electric windows * Standard cab * Air conditioning * Air suspension * Power steering * Digital tachograph * Radio/CD * Electric windows and mirrors * AdBlue tank * Roof spoiler * Fog lights * Comfort air-suspension seat * Multifunction steering wheel * Sun visor * Edscha sliding roof system * Lashing points in external frame (Multilock outer frame) * Stake pockets with insertable stakes * Adaptive cruise control (distance warning system) * Lane departure warning system * Valid inspections: HU / AU until 12.2025 * Transmission type: Automatic * Suspension: Leaf/Air * Gross vehicle weight: 16,000 kg * Unladen weight: 6,820 kg * Payload: 9,180 kg * Permissible total weight: 16,000 kg * Tire condition, 1st axle: 95% -- 95% - Tire size: 285/70 R19.5 * Tire condition, 2nd axle: 30% | 30% -- 30% | 30% - Tire size: 285/70 R19.5 * Wheelbase: 5,300 mm * Tire sizes: 285/70 R19.5 * Internal dimensions: L = 7,500 mm, W = 2,490 mm, H = 1,930 mm * Loading volume*: 36 m² * Pallet spaces: 18 * Body: galvanized Gkedpfxoxtikcj Aftof Liability disclaimer: Subject to change, prior sale, and errors. Further photos and videos can be found on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documents * Ordering export plates / customs plates * Vehicle preparation: new tarpaulins, signage, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, vehicle registration service * Vehicle transfers Contact our trained sales staff; we are happy to advise you.

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 3740 mm Measurements depth 1475 mm Measurements height 11920 mm Machine weight 3300 kg Control Unit Brand ARBURG Model SELOGICA ND Injection Unit Screw diameter 35 mm Shot weight 132 g (PS) Stroke volume 144 cm3 Injection pressure 2000 bar Screw speed 54 m/min Heating capacity 6.4 Clamping Unit Clamping force 600 kN Opening stroke 400 mm Max open daylight 600 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max - Size of mold platens 510 x 510 mm Ejector stroke 125 mm Ejector force for / back 30 kN Media Main electronic connection 23 kW Pump drive power 15 kW Gkedpfx Afjx D Sr Dotef Oil tank 135 l This Arburg 370 S 600-290 U Injection moulding machine was manufactured in the year 2022 in Germany. It is new, never used and still in original packaging. With a clamping force of 600 kN, 290 injection unit and screw diameter of 35mm (armored, highly wear-resistant screw) it is a compact, fully hydraulic clamping system - ideal for reliable and precise reproducibility in injection moulding operations. The closing unit can be tilted from horizontal to vertical. To be considered that machine comes without position control. Application Types Injection Moulding