Used Roboform 20 for sale (28,687)

Condition: ready for operation (used), machine/vehicle number: 16244, Year of construction: 2020, operating hours: 7,200 h, load capacity: 2,000 kg, lifting height: 4,300 mm, fuel type: electric, mast type: triplex, battery voltage: 48 V, fork length: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,300 mm Attachment Manufacturer: KAUP Model: 2 T 163 S Design: Fork positioner with side shift Overall width: 1,120 mm Side shift: ±425 mm Opening range: 140–990 mm ISO class: 2 Weight: approx. 129 kg Fork Design: Pin-type forks Load capacity per fork pair: 2,500 kg at a load center of 600 mm Fork dimensions: 120 × 40 × 1,000 mm ISO class: 2 Weight per fork: approx. 57 kg Remaining load capacities At 3,000 mm lifting height and 500 mm load center: approx. 1,620 kg At 3,000 mm lifting height and 600 mm load center: approx. 1,440 kg At 3,000 mm lifting height and 1,000 mm load center: approx. 1,000 kg MACHINE DETAILS Mast: Triplex mast FSV4300 Hydraulic valves: 4 Drive: Electric Operating hours: approx. 7,200 h Total hours: approx. 16,800 h Battery voltage: 48 V PC power supply: 24 V / 80 W Charger connection: 400 V Isdezt R A Tjpfx Afvotk Batteries: 4 pcs, 48 V / 750 Ah BFS Chargers: 2 Hawker Werk HF, 48 V / 120 A EQUIPMENT KAUP fork positioner with side shift Continental SE tires, front and rear, abrasion-resistant, including K64A Grammer MSG65 driver's seat with artificial leather cover Direction switch in the armrest Mini-lever control Multi-function display with wheelbase indicator Panoramic mirror 2 LED work lights with protection Acoustic reversing signal Blue LED warning light to the rear Flashing beacon below the operator's protective roof Seat belt switch with OPS seat switch Smart Access with driver card Side battery cover The overall height and weight of the forklift must be taken into account when selecting the transport vehicle. There is no loading ramp on site. However, a forklift with a load capacity of 15 tons is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The specifications are the technical data from the original offer. No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on site before the auction ends.

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, workpiece weight (max.): 550 kg, total height: 2,790 mm, total width: 2,540 mm, total length: 1,910 mm, table width: 880 mm, type of input current: three-phase, table length: 560 mm, table height: 225 mm, workpiece length (max.): 880 mm, workpiece width (max.): 550 mm, workpiece height (max.): 225 mm, year of last overhaul: 2025, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance according to dealer prescrition performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Optionally floppy drives can be exchanged for USB drives. Tested and fully functional. Can be viewed and tested in working order. Immediately available! Iodpsw Ad Idsfx Afvotk

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 642544, travel distance X-axis: 350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 2,600 mm, total width: 2,500 mm, total length: 4,000 mm, table width: 400 mm, table length: 450 mm, input voltage: 400 V, overall weight: 5,000 kg, input frequency: 50 Hz, controller manufacturer: CHARMILLES, controller model: SOLUTION, CHARMILLES ROBOFORM 350 SL Wire EDM machine - Rated current: 10.6 A - Table with three grooves The machine is equipped with an EROWA clamping system, as well as an EROWA Robot Compact automatic tool and electrode changing system, with a 44-position electrode changer. In addition, there are two workbenches with matching accessories such as clamping devices, a mounting plate, and various EROWA clamping systems and electrodes. Note: The item must be collected between September 8th and September 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck. Iedpfx Aszldycofvetk

Condition: good (used), Year of construction: 2007, operating hours: 10,490 h, functionality: fully functional, Channel baling press Presto HPK 20/50 S, year of manufacture 2007 Manufacturer: Presto Type: HPK 20/50 S Year of manufacture: 2007 Operating hours: 10,490 (as of 08/2026) Drive: 22 kW Pressing force: 50 t Feed opening: 1200 x 700 mm (L x W) Channel cross-section: 700 x 750 mm Feed volume, max. 0.63 m³ Cycle time: 23 s Tying: 3-fold, automatic Throughput capacity at 35 kg/cbm: 2.9 t/h 60 kg/cbm: 4.3 t/h 100 kg/cbm: 6.3 t/h Bale weight: up to 450 kg Machine dimensions: 760 x 1350 x 2350 mm (L x W x H) Machine weight: approx. 7,500 kg Materials: paper, cardboard, film Note: The press is in good condition and is currently still in operation. An inspection is possible by appointment. The machine will be available from the end of 2026. Itodpfx Afozvbbrjvok Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without warranty.

Condition: used, Year of construction: 2021, 1 unit of METALLKRAFT HSBM 2020-20 SB press brake Color: as shown in the pictures, according to the images and inspection Year of manufacture: 2021 Machine number: 3772920 Dimensions L/W/H: 260 x 60 x 145 cm Condition: used Payment method: prepayment by bank transfer Isdozvc Hvepfx Afvetk Shipping: Self-collection only – No shipping is offered for this item!

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 6582016004, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Itjdpfoztxtaex Afvek Detailed information about the machines is provided in the attached file.

Year of construction: 2023, condition: used, This is a vacuum packaging machine from the manufacturer VakuMit, type EST 20 LC. In this vacuum device, the vacuum is determined by a process developed and patented by VakuMit. The vacuum packaging machine is equipped with a powerful 21 m³/h pump. Operation is via the LC control panel. The machine has been completely overhauled in our in-house workshop and is in perfect working order. The base cabinet is equipped with ball-bearing pull-out drawers and has swivel castors with a parking brake. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Testing according to DGUV V3. Technical data: W x D x H: Base cabinet: 470 x 620 x 760 mm Chamber size: 410 x 420 x 140 mm Length of sealing bars: 405 mm Power connection: V: 230 / kW: 1.3 Packaging capacity: approx. 1-2/min. Vacuum pump standard: 21 m³/h Weight: approx. 70 kg Machine number: 1900031023 Year of manufacture: 2023 Condition: used, completely overhauled, fully functional LC control – SemiSens Touch: with button control panel including the patented vacuum determination easy cleaning simple operation Itedpfx Aozvatyofvsk Additional information: Vacuum chamber and housing made entirely of stainless steel easily removable sealing bar automatic adjustment of the sealing intensity service-friendly machine design Soft-Air purge Acrylic glass lid for observing the packaging process automatic process sequence with lid opening Vacuum determination (no time controls) Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FPS-20-RS, Schiatti Angelo FPS 20 RS 2015 Excellent condition Iedpfx Afozrx Inovetk 10 spindle glass edging machine including cerium wheel Can dismantle and load for buyer

Condition: used, machine/vehicle number: 008706, Max width workable: 600 mm Max length workable: 2500 mm Max height workable: 1220 mm Max feed speed: 16 m/min Iodpfx Aszrl Hkjfvstk

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 6582018005, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Detailed information about the machines is provided in the attached file. Itjdpfx Ajztxv Ujfvsk

Condition: used, functionality: fully functional, This machine is capable of producing bent bolts with threads on one end (eye bolt) or both ends (u bolt) Iedpfx Afozt S U Revotk

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Itsdjx A Tbwopfx Afvek Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Itjdpfx Aezivhtofvok The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle mount: MK 3, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various quick-change tool holders, collets, and 3 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable design – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm Isdpfx Afeyxvqvsvetk - Turning diameter: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW - Tailstock diameter: 50 mm - Arbor: MK3 - Stroke: 120 mm - Dimensions (LxWxH): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - 1 x EMCO EMCOMAT-20 D - 1 x Drawer cabinet with various tools, collets, etc. (see pictures) - 2 x RÖHM chucks (3 and 4-jaw chucks) - 6 x Quick-change tool holders (see pictures) - 1 x Complete manufacturer documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality “Made in Austria”: Are you interested? Please contact us to arrange a viewing appointment or to request a quote.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D Itsdpfx Afsznz Ezjvok • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00662, load capacity: 20 kg, arm reach: 1,650 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 2600-20/1.65 manufactured in 2015.10. The robot comes with an IRC5 controller including Flexpendant DSQC679. Itsdpfozu Tykox Afvsk   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 2600-20/1.65 Model Number: IRB-2600 Year of Manufacture Robot: 2015.10 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1650 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 272   Controller: IRC5 Year of Manufacture Cabinet: 2017.03 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Iodpfx Aezrwypofvjtk Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: used, Year of construction: 1981, thread length: 100 mm, overall weight: 4,310 kg, screw diameter: 12 mm, production capacity: 260 unit/h, Equipped with Vibratory Bowl & Stand Itodpfxjzt Tc Ns Afvok

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system. Itedpfxjzrwzao Afvek

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Isdpjx A Hfvjfx Afvetk Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. Isdpfx Afezr N H Usvotk • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Max. Workpiece Weight: 400 kg Itedpfx Afszncqlevsk Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Ready for inspection under power.

Condition: used, Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, overall weight: 412 kg, load capacity: 20 kg, arm reach: 2,500 mm, controller model: IRC5, Industrial robot ABB IRB4600-20/2.50. The robot is fully functional. Year of manufacture: 2017. Power supply: 3 x 400V. 16,000 operating hours. For further information, please do not hesitate to contact us. Itedpfx Afjx Akz Iovek

Condition: good (used), Year of construction: 2017, functionality: fully functional, number of clamping sleeves: 5, The UNO smart presetting device is a compact and user-friendly solution for the precise measurement and presetting of tools directly in the production environment. Thanks to its small footprint and simple manual operation, the device is ideal for toolmaking, machining operations, and single-piece and series production, where high measurement accuracy and efficient workflows are required. Equipped with the highly precise Microvision SMART image processing system and a manual precision spindle with an SK50 tool holder, the UNO smart enables exact tool measurement with a repeatability of ± 5 µm. The robust gray cast iron construction, combined with a thermally optimized material selection, ensures high stability and reliable measurement results, even with fluctuating ambient temperatures. In addition, the device has a memory for up to 99 zero points and an integrated energy-saving mode. The included reducer rings allow the presetting device to be used flexibly for other tool holders, such as SK30, SK40, BT30, BT40, or HSK63, thus offering versatile applications in various production environments. Ijdozl Sy Repfx Afvjtk With its compact design, high measurement accuracy, and excellent price-performance ratio, the UNO smart represents an economical and reliable solution for precise tool presetting. With our comprehensive all-inclusive package, we can take over the complete service upon request – from the professional delivery and installation to the alignment and commissioning of the presetting device. Finally, our service technicians carry out all the necessary functional tests and ensure that the UNO smart operates reliably and precisely.

Year of construction: 1968, condition: used, functionality: fully functional, machine/vehicle number: 2276, Karl Klink HW 20 Reaming Machine For sale is a functional Karl Klink HW 20 reaming machine. This machine comes from the renowned Karl Klink tool machine factory and was used in industrial applications until recently. It is suitable for precise reaming operations in single-part and series production. Technical Data Manufacturer: Karl Klink Tool Machine Factory Model: HW 20 Machine Type: Reaming Machine Year of Manufacture: 1968 Weight: approx. 5,500 kg Connected Load: approx. 19 kVA Condition Fully functional Used Iedszvf Tropfx Afvotk Inspection possible by appointment Sale due to changes in equipment Delivery FCA location Dismantling and transport by the buyer Overhead crane and forklift can be made available for loading upon agreement.