Automatic painting system for chairs or similar products

CM

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed Nwjdpfxeyaq Tao Ag Ijc - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Year of construction: 2008, condition: excellent (used), machine/vehicle number: WK43/07, Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Nodpfx Agoikvlme Ijwc Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Condition: excellent (used), TECHNICAL DATA Njdpoymm E Ssfx Ag Iowc - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 350 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 350 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR35 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 350 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Nwjdpfx Aoymad Ueg Ijc Price : 1460,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), Further information will follow. Accessories: Separator frame (stainless steel) 1200 x 1000, separator drum, motor, tool kit, documentation Nwodpfjqzx Dqox Ag Ioc

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack designed for industrial storage – approximately 18.5 m long and 7 m high. It is ideal for logistics operations, warehouses, and trade businesses needing maximum storage capacity in a minimal footprint. Manufactured in Europe, this racking system offers stability, quality, and durability. Now available directly from stock – perfect for companies with high turnover volumes. Customizable to your requirements: The rack uprights can be adapted to your desired height, precisely and professionally rebuilt in our workshop. Contact us – we offer tailored solutions for your storage needs. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 1850 cm - Shelf load: 3200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL 2004 (orange lacquered) - Uprights: 700 x 110 cm, RAL 5015 (blue lacquered), pre-assembled - Levels: Floor + 3 - Pallet spaces: 80 incl. floor loading positions - Condition: Used Stow system SCOPE OF DELIVERY: - 06 x Uprights (approx. 700 x 110 cm), pre-assembled Nwedsymab Tjpfx Ag Ioc - 30 x Beams (approx. 360 x 14.5 x 5 cm) - 60 x Safety pins Price: 1,980.00 € net 2,356.20 € gross An invoice with VAT will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany by our partner freight forwarder – shipping costs depending on postcode - Professional assembly and disassembly by trained teams optionally available - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new construction, modification, or extension, we will support you professionally in configuring your racking system. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, storage racks, and further solutions. Many systems are assembled and ready for demonstration. Our expert advisors are available for all your questions and offer individual consultation – we look forward to welcoming you! Didn't find the right solution yet? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone. Our phone number is available on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 450 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1640,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Nwjdsymaa Njpfx Ag Ioc Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Gaulin MC7 high pressure homogenizer, single stage. Capacity 3,000 l/hr, 210 bar. 22 kW electric motor. Piston diameter 43.44 mm. Very good condition. Nwedewf Iv Repfx Ag Ioc

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Stand in galvanized - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 250 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Nsdoymaapopfx Ag Ijwc Price : 1280,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright Nwjdpjyl U Tbsfx Ag Ioc - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: excellent (used), pressure: 210 bar, Gaulin, Homogenizer model MC18 3TPSX. stainless steel clad, 2 stage hydraulic valve assembly, 54mm pistons, Tungsten Carbide coated. aseptic cylinder block, puppet valves.. Nwedpfx Ajwf Itcjg Isc Remote controlled homogenization pressure adjustment and read-out. Capacity 6000 l/h, 210 bar Maintenance history available. Spare parts available. Excellent working condition

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm Nodpeyl U S Rjfx Ag Ijwc - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Nodpfx Aeyl U Rmsg Iewc Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: ready for operation (used), Technical characteristics Cutting dimensions: 4300 x 4400 mm Max. blade projection from work surface (cutting height): 95 mm Main blade max. diameter 320 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Blade carriage speed adjustable from 5 to 120 m/min Pusher feed up to 60 m/min Automatic lateral alignment device 4 air-cushion unloading tables with rounded profile 9 pneumatic clamps Windows PC-based control Remote-controlled Start cycle pusher, including emergency pusher QUICK CHANGE device (quick blade release) Printer for labelling Nwjdpfx Agsucirke Isc Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. Nedsyl U Hhspfx Ag Ijwc - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.