Wood, milling, milling tools, wood cutter, profile milling cutters
-Außen ø 138 mm
Height 25 mm
Recording ø 30 mm
-aufgeschraubtes blade 140 x 4 mm
Weight 2.7 kg more
Mot. Guillotine HM – 1.275 x 3 mm
- Make : HM - Denmark
- Typ : JBS
- Age : 2003
- No : iM 435078
- Max. length. 1.275
- Blade length. 1.275
- Max. thickness. 3 mm
- Cutting angle. 1 ° 30
- Max. stroke’s p/min ca. 32
- Back gauge ca. 750 mm by hand
- Working height ca. 750 mm
- Dimensions 1,77 x 1,52 x 1,27 Mtr.
- Weight. 0,76 ton
- Power. 400 v / 2 kW
- Like new / good condition
Please Note: The above information has been obtained to the best of ou... more
3050 x 3, 0 mm, 1.5 mm stainless steel, sheet metal high clamp, pneumatic
with foot switch
Total power: 7,5 kW
Machine weight: 2650 kg
Space required: 3760 x 2160 x 1280 mm
with cutting gap adjustment with holders with angular stop cutting angle: 1.5 degree more
-maximum working width 1290 mm
-maximum material thickness (at 40 kg strength) 2 mm
-front angle stop
-front material supports approximately 300 mm
-Rear gauge manually adjustable 5-650 mm
-Strokes approximately 32 / min
-Cutting angle 1.9 °
-Preset single stroke / continuous stroke
-Drive 400 V / 3,0 kW
-E - foot switch
-Space including Backgauge, without front support arms - about B 1500 x H 1150 X 1450 mm
-Weight 800 kg more
Manual folding machine Fabr. HM type HS 5
Working length 2020 mm
maximum sheet thickness 1.00 mm
Max dimension 50 mm
Bending angle 45 °
Dimensions L x W x H 2375 x 680 x 1150 mm
Weight 495 kg
-Counterbalance of the bending beam
-foot-operated upper cheek delivery
used, in good condition more
-Year of manufacture unknown
-Serial number 150067
-Working width 1,060 mm
-Thickness Max 1, 25 mm
-Table height 750 mm
-Weight approx. 175 kg
-Function not always guaranteed
-Knife must be ground fresh
Mediation in the sales order with the following contract:
1. Bill possible, however no VAT
2. transport through its own buyer
3. inspection/test run by appointment possible
4. payment only by cash in advance
5. machines without any guarantee or warranty (purchased as seen)
6 machines no l... more
filling machine / rotary filler
Year of construction: 1988
For sauerkraut, red cabbage, kale and similar products
Filling material is filled by a screw drive
Feeding screw: adjustable
Speed: 6-8 cans per minute
Direction of rotation: counterclockwise
size of the cans: 10.200 ml or volume: 10 kg
diameter 23 cm
Height 26 cm
Volume content of cuttings: 10 kilos
Plate for 6 cans
length of conveyor belt: 3,65 m
Dimensions of the machine L/W... more
Support claw, sheet metal clamp, sheet metal claw, clamp, sheet metal gripper, material gripper, material gripper
Span width of 450 mm
Capacity 1.000 kg
-2 x available price per piece
Weight 8 kg more
Antique Machine folding machine Brehmer 1/504
Serial-No. - - Year -
-We would be very pleased with your visit - more machines on Stock-
-Can be inspect-
-On Stock Emskirchen / NÃ¼rnberg - Can be test-
Sales only within Europe, incl. Turkey
Price without packaging; terms of delivery: FCA (machine location)
Technical data see handout.
Any warranty is excluded.
For the correctness of the technical data and year of manufacture,
for the completeness of accessories and tool equipment,
and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations, we do not assume any warranty.
No sale to private persons.
Sales only within E... more
Joinery saw Schmidler RS 1
For fast and economical processing of rods, planks and slats.
Wooden Dimensions min.: 20 x 55 mm
Wooden Dimensions max.: 55 x 250 mm
Engine power: 5.5 kW
Cutting disc Diameter: 400 mm
Rotation angle: 140 °
Pressure: 6 Bar
Year of Build 2005
Extraction 160 mm more
Make Sussmeyer, Type HM 150 [...] No 103780, New 1990, Disc material Mild steel, Horizontal sand mill (1x), Capacity 150 Ltr., House sizes Dia. 420x1300mm, With mechanical seal , With jacket , Motor 84 KW, 380/660 Volt (Ex), With variable speed drive , Floorspace 3,6x1,5 M, Total height 1,9 M, Weight 4250 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome t... more
Model 31i-MODEL B series
Spindle speed range 6000
X-Axis Movement 2100 mm
Y-Axis Movement 1500 mm
Z-Axis Movement 1500 mm
This Doosan HM 1250 Horizontal Machining Center was built in Korea in the year 2016. It has a production record of only 6734 working hours. It is operated through a FANUC 31i-MODEL B series control unit . This machine perform with a spindle speed up to 6000 rpm. It includes 2 pallet with 1250 mm x 1250 mm size.
Commercial vehicle spare part, engine D0846 HM, used - 6 cylinders, 7.258 ccm, several times on stockCondition of purchase is a commercial activity of the buyer and its corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery are carried out exclusively on the basis of our GTC:www.autogilles.de/agbMarke:: MANModel: D 0846 HM - 168 PS - 6 ... more
-Steuerung Heidenhain iTNC 530 Digital
-X-Achse: 2000 mm
-Y-Achse: 1000 mm
-Z-Achse: 510 mm
-Heidenhain Meßlineale x,y,z
-Heidenhain Handrad HR-410
-TDM Elektro-Spindel 17.000 Upm / 31,5 kW / SK 40 / Big Plus
-Schneckenförderer links und rechts sowie Querförderer
-Luftkühlung durch die Spindel
-Innere Kühlmittelzuführung durch die Spindel
-Verkabelung 4. Achse
-Random Ketten-Werkzeu... more
CNC vertical milling machine s type HM 450
CNC controller HEIDENHAIN TNC 145
Fabr. No. 82451194 built in ca. 1987
Routes x 1500 mm, Y: 630 mm, z: 630 mm
Table size 2100 x 600 mm
Distance spindle nose - table 600 mm
Extension spindle Center - stand 640 mm
Table load of Max 3000 kg
ISO 50 spindle adaptor
Spindle speed 60-1800 rpm in 12 steps
Pinolvorschub speed 0.05 / 0.1 / 0.2 / 0.4 mm / Rev
Spindle drive 22 kW
Power supply 380 v, 50 Hz
-Vertical head swivel +/-45°
-Footswitch for hydro mechanica... more
NFZ spare part, engine D 0836 HM - D 0836 HM70 - D 0836 HM81, used - 6 cylinders, 7.030 ccm, several times in stock, condition for the purchase conclusion is a business-commercial activity of the buyer and their corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery are made exclusively on the basis of our GTC:www.autogilles.de/agbMarke... more
Model Unilog B4
Screw diameter 18 mm
Nozzle pressure 47 kN
Clamping force 600 kN
Opening stroke 450 mm
Ejector force for / back 26.4/16.1
This Battenfeld HM 60/130 S Injection Moulding Machine was manufactured in Austria in 2005. Operated through a Battenfeld Unilog B4 Control unit, this machine can work with a clamping force of 600 kN.
Injection Moulding more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.