Year of construction: 1990
Dimensions: approx. L 1.20 x 0.80 x H 1.20 m
Weight: approx. 150 kg
All information without guarantee.
A demonstration under power is possible at any time in our exhibition hall. more
Permanently heated transverse welding and longitudinal welding system
max welding width 350 mm
max.possible passage height 100 mm
Film Half tubular film
Electrical system 3Ph/400V 50 Hz with ground and zero
Control voltage 24V/DC
Gap closing Pneumatic, therefore it is also possible to
short packages, from infeed to outfeed belt.
Condition of the machine has been revised.
Documentation available. more
4010x2.0 mm, 2.5 mm aluminium, with hand lever control, manual roller shears, with 5-fold bending angle preselection counter
Machine is repaired, checked, cleaned and is then fully functional. Test run is performed.
Total power consumption: 16 A
Space requirement: 4600 x 1700 mm
insertion depth: 1000 mm
Machine weight: 1800 kg
with roller shears
Bending angle: 140 degrees more
The machine is completely in good working condition, complete with documentation.
The machine has servo motors to fully automatically adjust the width and height from a program.
Shrink tunnel is supplied with 2 blowers for extra high capacity with stable heat.
Also included is the driven 2x 90 degree bend, ideal for smaller production areas. To make the discharge complete, the straight discharge conveyor is also included, adjustable on speed from the BVM!
The machine is fed by a Finger co... more
Round cylinder, pneumatic cylinder, standard cylinders, air cylinder, pneumatic punch, air stamp
Stroke 100 mm
Pistons ø 40 mm
Piston rod ø 16 mm-Gesamtlänge 335 mm
Extended-Gesamtlänge 435 mm
-End-position damping, adjustable on both sides 2 x available
Price per piece
Dimensions 48/335 mm
Weight 2.75 kg more
New unitBuilt: 2019AirCoat Spraypack with 5 litre top containerSmall volume processing with top container or working directly from the original containerUnique double branching technologyPerfect for shear and moisture sensitive as well as pre-sheared 2-component materialsSuitable for use in potentially explosive areasProcessable materials: paints, primers, glazes, impregnations, oils, greasesMax. Max. flow rate at 12 MPa 2.0 l/minWeight: 23 kgAvailability: immediateLocation: Hochheim
turning diameter over bed: 400 mm
turning diameter over support: 200 mm
turning length: 1000 mm
centre height: 200 mm
spindle passage: 56 mm
range of revolution per miute: [...] / 18 step U/min
feed in x - axis: 0,023 - 4,8 / 42 step mm/U
feed in y - axis: 0,011 - 2,4 / 42 step mm/U
rapid motion - x-axis: längs: 3500 mm/min
rapid motion - y-axis: quer: 1750 mm/min
tailstock quill taper MT: MK 5
tailstock quill adjustment:: 230 mm
total power requirement: 12,4 kVA
weight of the machine... more
Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic pistons, air punches
-Hubweg 10 mm
-Piston Ø 40 mm
-Piston rod Ø 16 mm
-Price per piece
-Number of 4
-Diameter 112/77/H30 mm
-Weight 0,55 kg/pc. more
used Bosch Denoxtronicpassend for MANBosch number: 0 444 010 011MAN number: 81.15403-6016Condition for purchase is a business-commercial activity of the buyer and its corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery are made exclusively on the basis of our General Terms and Conditions:www.autogilles.de/agbMarke:: BoschModell: / MA... more
Pneumatic cylinder, pneumatic cylinders, pneumatic stamp, air stamp
Stroke 420 mm
Piston diameter 32 mm
Piston rod 12 mm (connection M 10 x 1, 25 thread)
-4 x available
Price per piece
Weight 1.8 kg / piece more
pressure: 320bending length: 4100column width: 3550daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 4710x3100x2550weight approx.: 170004 axes (Y1, Y2, X, R): Ja alle Achsen über die SteuerungCNC crowning system by control: ja über die CNC Steuerungmotor power: 30
KK-Industries GmbH has the general agency of the KK Kletzer group of companies.
We have put together a high-quality model for Europe.
The CNC press brake KK-Industri... more
Hammer drill, chisel hammer, combi hammer, Bosch hammer, stem hammer
-Makita electronic hammer drill HR4010C with case and accessories
-Combihammer for SDS-MAX tools
-Nominal recording 1100 W.
-Speed 235-480 rpm
-Blocks 1350-2750 / min
-Dimensions case 640/480 / H150 mm
-Weight total 18 kg more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.