Used Hakomatic B 1100 for sale (41,816)

Condition: used, Year of construction: 2006, operating hours: 704 h, Hako Hakomatic B1100 scrubber-dryer, built in 2006, operating hours: only 704 hours, previous owner: German Armed Forces, includes charger, battery built in 2006, in good condition, ready for immediate use. Nsdpfx Afswapd Eo Iowb We can provide you with a leasing or financing offer upon request. Mr. Mihm (Tel. +49 1 800 800) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted!

Condition: used, Year of construction: 2010, mileage: 1,081 km, power: 15 kW (20.39 HP), first registration: 04/2010, overall weight: 1,787 kg, fuel type: electric, color: red, axle configuration: 4x2, maximum load weight: 1,080 kg, empty load weight: 707 kg, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, * German vehicle * Condition see photos Nodpfevhqiysx Af Ijwb * Ideal for large halls, parking garages etc... * Original only 1081 operating hours * Ideal for operation in large halls, logistics and parking garages as no exhaust fumes due to electric drive * Compact high-performance scrubber-drier for wet scrubbing and dry vacuuming in one operation * Combination machine with additional sweeping system, with dust extraction. * Hako B1100 sweeping and scrubbing machine * Area performance max. theoretically up to 7,000 m2 /h * Wet cleaning unit * Working width of brush head 102 cm * Brush diameter (2 brushes) 53 cm * Brush speed 210 rpm * Brush motor (2 pieces) 2 x 700 W * Brush contact pressure up to 540 N * Suction foot (working width) 126 cm * Fresh/dirty water 185/185 liters * Sweeping suction device: * Working width 138 cm * Electrical equipment * Rated voltage 36 V * Drive battery 36 V/640 Ah5 PzS * Drive motor 2000 W * Travel speed up to 8.0 km/h * Sweeping suction ? Fine and coarse dirt are picked up cleanly in the dry area in front of the scrubbing unit. * Wet scrubbing ? Even the toughest incrustations are removed cleanly by the rotating disk brushes * Dry vacuuming ? The pendulum-suspended, parabolically shaped squeegee leaves the floor immediately dry and ready to walk and drive on * Large tank capacity ? Long working times and short set-up times thanks to the flexible wall between the fresh and dirty water areas. * Dirt/water treatment system for multiple use of the water used for cleaning. ? Consistent cleaning quality in conjunction with the detergent dosing system. ? Enormous reduction in set-up times and water consumption. ? Optional use of fresh water or treated waste water. The fresh water tank always remains clean If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Ride-on Scrubber Dryer Hakomatic B 750 R – used - : Price ex location: only €1,250 (net)! The battery is deeply discharged, possibly defective! Manufacturer: Hako Model: Hakomatic B 750 R Njdex El S Aopfx Af Ijwb Year of manufacture: unknown Serial number: 7090205065514 Operating hours: 850 h Battery is deeply discharged Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, operating hours: 172 h, overall weight: 1,500 kg, fuel type: electric, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / TOP condition Nwodpfxjwfflve Af Ieb Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see photos - visually TOP Operating hour meter reads "172" 4 brushes Electric-operated Battery, full power 36 V DC / 5.5 KW Weight: 1500 kg New price: approx. €39,900 Price quoted for pickup from the warehouse in 47441 Moers Various cleaners and scrubber-dryers in stock We offer them as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings by telephone on Tuesdays and Thursdays between 9 a.m. and 4 p.m. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: used, machine/vehicle number: 948587884, Working width of the brush head: 65 cm Njdjc Uvfvspfx Af Iewb Number of disc brushes: 2 Suction width of the squeegee: 95 cm Driving speed forward/backward up to max.: 5,5/2,5 km/h Turning circle-Ø outside: 1,9 m Unladen weight: 254 kg Total weight incl. 74 l cleaning solution: 378 kg Space requirement: Length with brush head and suction: 146 cm Width without/with suction: 68/95 cm Height: 103 cm Tank capacity for fresh water approx.: 72 l Tank capacity for waste water approx.: 78 l

Condition: good (used), functionality: fully functional, Hako B43 S combination floor cleaning machine with accessories: Manufacturer : HAKO Werke GmbH Germany S/N 740671353081 Nsdpoty Su Ejfx Af Iowb Functional Suction pump, washing brush or squeegee Battery charger 24 V Charging voltage 800 W 90 kg CE marked

Condition: refurbished (used), Year of construction: 2014, Hako Scrubmaster B70 CL Completely refurbished scrubber-dryer with new batteries, new suction turbine, and much more – comes with a 6-month warranty and a new DGUV V3 electrical inspection including inspection report. Working width without squeegee: 65 cm Working width with squeegee: 95 cm Maximum area performance: 3,200 m²/h Fresh water tank: 72 L Recovery tank: 74 L Traction drive: Yes Drive type: Electric 24V Battery: 4 x 6V 180 Ah GEL batteries Njdpstthfvefx Af Iswb Installed new parts / repairs carried out: - 24V 600W suction motor – new - 4 x 6V 180 Ah GEL batteries – new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses – new - Disc brushes – new - ACLA rubber wheels – new - Suction lips – new - Fresh water filter – new Additionally, we offer: Service, repairs, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2012, operating hours: 2,134 h, Hako Scrubmaster B45 TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and new DGUV V3 electrical inspection with test certificate. Working width without suction bar: 51 cm Nwedpju Sr U Nefx Af Iob Working width with suction bar: 86 cm Max. area performance: 2000 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / repairs carried out: - Suction motor 24V 400W new - 2 x 12V 85Ah GEL batteries new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses new - Disc brushes new - Support wheels new - Squeegee blades new - Fresh water filter new Additionally, we offer: Servicing, repair, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,665 h, working width: 850 mm, area performance: 4,200 m²/h, overall weight: 393 kg, type of input current: DC, input voltage: 24 V, tank capacity: 74 l, water tank capacity: 72 l, battery capacity: 180 Ah, operation weight: 393 kg, Hako Scrubmaster B70 CL Refurbished scrubber-dryer with new batteries, new suction turbine, and much more – includes 6-month warranty and new DGUV V3 electrical inspection with inspection protocol. Working width without squeegee: 85 cm Working width with squeegee: 110 cm Max. area coverage: 4,200 sqm/h Fresh water tank: 72 L Recovery tank: 74 L Drive system: Yes Safety key: Yes Drive type: Electric 24V Battery: 4 x 6V 180 Ah GEL battery New components installed / repairs carried out: - Suction motor 24V 600W new - 4 x 6V 180 Ah GEL batteries new - Brush deck / brush motors overhauled (including new ball bearings, carbon brushes, and bumper strip) - All hoses new - Pad brushes new - ACLA rubber wheels new - Squeegee lips new - Fresh water filter new Additionally, we offer: Service, repair, and sales for all common Hako models. Nsdpfx Aeyanhbef Ijwb

Condition: good (used), Dimension: Width: approx. 2.900 mm Height: approx. 1,038 mm Depth: approx. 1.100 mm Technical data of the workbench frame: Manufacturer: Jung Heinrich Type: T Included in delivery are: 02x workbench stand, used material color: blue stand height: 1.000 mm stand depth: 1.100 mm stand profile: 100 x 65 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( welded truss ) 02x workbench crossbars, used Material color: yellow box profile: 120 x 50 mm type of truss: HN 120|25 clear width: 2.700 mm 04x safety pins, used execution: completely galvanized 01x chipboard II. choice, used Nedpolnfi Rsfx Af Ijwb thickness chipboard: 38 mm width chipboard: 2.900 mm Depth chipboard: 1.100 mm Chipboard in two parts if necessary 08x drilling screws, new Finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: similar beige total width: approx. 1.200 mm total height: approx. 1.100 mm Mesh size (outside): approx. 93 x 53 mm Nodjlucaqspfx Af Iowb Mesh width (inside): approx. 88 x 48 mm Frame profile dim.: L-profile 30 x 30 mm The back wall grids are rusty, partly the frame profile is damaged, see pictures.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,115 mm, TECHNICAL DETAILS Max. working width: 1,115 mm Number of units: 2 pcs. MACHINE DETAILS Nsdpfx Asydv Dxsf Ijwb Voltage: 400 V Fusing: 85 A Power: 41.0 kW Transport packages: 2 pcs. EQUIPMENT CE marking Documentation

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. Nedpfjuddimsx Af Ijwb MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Nwodpfxsxgic Ej Af Ieb Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Year of construction: 2015, operating hours: 1,100 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21932 Nodpfxox Anbfs Af Ijwb Specifications: Year: 2015 Hours: approx. 1100 (may increase) Weight: 26,500 kg Power: 54 kW Hopper: 6 m³ Central lubrication Remote control Single owner 3 tires Service history available Ready for delivery Description:Well-maintained Keestrack screening plant with only 1100 hours. The machine has run only 1100 hours, but the hours may increase. The machine has had a single owner, and full service history is available. Hours: 1100 Own weight: 26500 Kw: 54 Model: Combo Eco Sorteringsverk. 1100 timer! SE VIDEO

Year of construction: 2021, condition: used, Carbolite GERO Carbolite GERO Muffle Furnace ELF 11/6B – 1100 °C – Year of manufacture: 2021 Product description For sale is a Carbolite GERO muffle furnace, type ELF 11/6B, equipped with a 301 temperature controller. Njdpfxsx T A U Rj Af Iewb The unit is in good used condition and originates from professional use. The furnace has been functionally tested and reaches the set temperature (see display on photos). Ideally suited for laboratories, industry, training, material testing, ceramics, metallurgy, or research. Technical data Manufacturer: Carbolite GERO Ltd. Model: ELF 11/6B Year of manufacture: 2021 Max. temperature: 1100 °C Usable volume: approx. 6 liters Heating power: 2000 W Power supply: 230 V / 50–60 Hz Phases: 1 + N Rated current: approx. 9.7 A Temperature controller: Model 301 Country of origin: United Kingdom Certification: CE / UKCA Weight & dimensions External dimensions (W × D × H): approx. 420 × 530 × 615 mm Weight: approx. 40 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm Nwsdpfxox Ifgre Af Iob - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), Konica Minolta Bizhub 1100 with 1.6 million copies in good condition , tested and ready to print . Equipment : -PF 709 -GP 501 -FS 532 Nwsdpfx Afshtai Ie Ieb As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request.

Condition: used, Clamping plate, welding table, welding table, straightening plate -Width: 745 mm -Length: 1100 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 15 mm -with supporting ribs Nwjdpfxsfc Hfue Af Ijb -Weight: 140 kg

Condition: reconditioned (used), operating hours: 1,637 h, functionality: fully functional, working width: 750 mm, area performance: 3,700 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, HAKO HAKOMATIC B90 TB750 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) 1637 hours of operation. The 750mm cleaning head (TB750) is equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers are resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new rubber guard around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 750 Suction nozzle working width (mm): 1100 Theoretical capacity (m²/h): 3700 Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW BATTERIES 6V 175Ah SIAP GEL BATTERY (4x) NEW 380mm PPL 0.5 disc brushes (2x) NEW 24V 500W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 85 liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (750mm) ensures high surface coverage. Nwsdsydn S Uepfx Af Ijb The control panel is very clear and intuitive.

Condition: reconditioned (used), operating hours: 1,481 h, functionality: fully functional, working width: 750 mm, area performance: 4,900 m²/h, overall weight: 716 kg, warranty duration: 12 months, water tank capacity: 105 l, gradeability: 10 %, HAKO HAKOMATIC B750 R TB750 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Machine has 1481 hours of operation. 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for operation on any surface. New squeegee rubbers made of natural rubber. Built-in battery charger for easy daily use. New protective rubbers around the brush head prevent water from splashing outside the machine's outline. The device is equipped with new, durable drain hoses and a suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 750 Suction width (mm): 960 Theoretical capacity (m²/h): 4900 Working speed (km/h): 6.5 Tank capacity (clean/dirty water) (l): 105/105 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to work (kg): 716 Gradeability (%): 10 Njdpfx Aoydk Avof Iowb INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 380mm PPL 0.5 disc brushes (x2) NEW drain hoses (x2) NEW hose Suction head NEW head guards (x2) Built-in battery charger Squeegee with new guards Tenzi Normal 5L fluid - FREE KEY FEATURES: The 105-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface. The large working width (750 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Njdpohkz Hmsfx Af Ijwb Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, Year of construction: 2018, operating hours: 3,550 h, functionality: fully functional, Used machine Year of manufacture: 2018 Nwodsx I Ed Rspfx Af Isb Technical Specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0–100 mm Speeds 1st unit, frequency-controlled: 5–15 m/sec 2nd unit, frequency-controlled: 6–17 m/sec Feed speed, frequency-controlled: 0.2–8 m/min Electrical Main motor 1st unit – W: 7.5 kW Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit – W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Air consumption: 45 l/min Dust extraction per unit Required capacity with 100 mm connection: 6,100 m³/h Machine weight: 3,750 kg Accessories / Special features Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction unit Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Incl. H14 filter - Incl. EX version for aluminum - Incl. sludge container

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Nwsdpfx Aox Uwlaef Isb Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1100 mm -Piston rod mounting: Ø 53 mm -Cylinder mount: Ø 60 mm -Ideal for building a hydraulic press -Usable: universal -Dimensions: 1650/160/H120 mm -Number: 2 cylinders available Nsdpfxeb A Rr Ne Af Iswb Price: per piece -Weight: 225 kg