Used sliding table saws 1501-2300mm cutting length for sale (40)

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo). Bledpfx Akjz H Sbbenjn

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Sled length: 3400 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 145 mm Scoring saw: yes With electromotive height and lateral adjustment Rapido scoring system for stepless cutting width adjustment Adjustment range 2.8 - 3.8 mm including scoring saw blade Height adjustment of saw blade: electric Swivel adjustment of saw blade: electric Adjustment of rip fence: manual Adjustment of crosscut fence: manual Bledpfx Ajzq Srkjknsn Display of saw blade angle: digital display Display of rip fence: scale Display of crosscut line: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Palin parallel cutting device as an add-on unit with miter adjustment with display on the sliding table Dust extraction connection: 80 and 120 mm Machine length: 3400 mm Machine width: 2200 mm Weight: 1200 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 21-06-12-054, functionality: fully functional, operating hours: 385 h, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Available from April 1, 2027, for self-disassembly and self-collection. The machine features ProDrive control with a 3.5" color display and a separate keyboard. The height and swivel adjustment of the saw unit are motor-driven. The CNC-controlled parallel fence enables a cutting width of 1,300 mm. Equipment / technical data: • Machine height 910 mm • Control panel at eye level • ProDrive control with 3.5" color display • Main motor 5.5 kW (7.5 hp) VARIO • Stepless speed control, approx. 2,000–6,000 rpm • Saw unit that can be swiveled to one side, 0–46° • Extended cutting height for saw blade diameters up to 500 mm Bsdpfx Aksz Ah E Ronoln • AKE quick-change system for the main saw blade • 2-axis scoring unit • Motorized height and lateral adjustment of the scoring unit • Scoring unit motor 0.75 kW / 8,200 rpm • LED lighting in the area of the scoring unit • Table extension 840 mm • Double roller carriage 3,800 mm with floor support • On/off switch on the double roller carriage • Angle miter fence, length stop up to 3,500 mm • Two individual folding stops • Extendable cross slide extension, extendable to 650 mm • CNC parallel fence, cutting width 1,300 mm • Travel speed of the parallel fence 250 mm/s • Automatic dimension correction depending on the fence profile • Front support roller, 300 mm wide • DUPLEX 1350 mm double-sided miter fence • Template holder directly on the control panel • 99 storable cutting programs • Operating hour counter • USB interface • 400 V / 50 Hz Special equipment: 3,800-mm double roller carriage, CNC parallel fence 1,300 mm, 2-axis scoring unit, VARIO drive, and the DUPLEX miter fence. Inspection and test run possible by appointment.

Condition: used, Year of construction: 2006, Panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2006 Technical data Saw blade diameter: max. 500 mm Main motor power: 5.5 kW Bledsz E Rnqjpfx Aknen Scoring motor: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, For sale: a Hammer K3-Basic panel saw. This machine has been used in our showroom as a demonstration model. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Tilting circular saw 90-45° - Sliding table 800 mm - Miter fence 900 mm - Cutting width 700 mm - 3 kW (4 hp) motor / 400 volts The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, call: 03137-3109 Related terms: circular saw, saw, table saw Reference: R-D1618 Bedpfjzn I D Dsx Aknjln

Condition: new, CATALOGUE NUMBER RE041 - new machine Blodpfx Aezr Ix Noknon TECHNICAL DATA - saw blade diameter ⌀250 – 350/30 mm - scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - main motor power 4 kW - scoring motor power 0.75 kW - rotational speed 4000 rpm - scoring blade rotational speed 8800 rpm - blade tilt 0 – 45° - max. cutting length 2000 mm - cutting width with parallel fence 1250 mm - splitter ⌀350 mm - spindle flange diameter 87.5 mm - table fence adjustable to 90° – 45° angle, accuracy ±1° - max. cutting height with ⌀300 mm blade 95 mm - max. cutting height with ⌀350 mm blade 120 mm - upper dust extraction port diameter ⌀80 mm - lower dust extraction port diameter ⌀100 mm - weight 620 kg - dimensions of folded machine (length/width/height) 2255x3460x1450 mm Net price: 19900 PLN Net price: 4628 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, Blade diameter ⌀250 - 350/30 mm Scoring saw blade diameter (works only with main blade ⌀300, 350 mm) ⌀120/20 mm Main motor power 4 kW Scoring saw motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of scoring saw 8800 rpm Blade tilt 0 - 45° Max. cutting length 1500 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Table stop ruler set to an angle of 90° - 45°, accuracy ±1° Max. cutting height with a ⌀300 mm blade 95 mm Max. cutting height with a longitudinal ruler ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Bjdpfx Aszx Dumsknoln Weight 650 kg

Condition: new, Year of construction: 2025, For sale is a Felder K500P panel saw with a cutting length of 2050 mm. The machine is a stock item with no operating hours and is therefore new. Technical data: - Sliding table 2050 mm - Panel saw, tiltable 90-45° - Extension table 1300 mm with miter gauge 2600 mm - Graduated scale index Bledez E Hv Dopfx Aknjn - Cutting width 800 mm with full table support - Panel saw fence with fine adjustment - 5.5 hp (4 kW) motor The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, panel saw, format Reference: R-S2186

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,140 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 7,000 rpm, total length: 1,700 mm, total width: 1,130 mm, total height: 1,100 mm, overall weight: 400 kg, Equipment: CE marking, documentation/manual, saw blade guard, Professional panel saw SICAR SEGA 300, manufactured in 2022. The machine is equipped with a 1600 mm long aluminum panel carriage, a scoring saw, and a tilting saw unit. The robust construction, based on a cast iron table and a heavy-duty saw unit, ensures stable operation and high cutting precision. The saw is designed for processing solid wood, furniture boards, MDF, plywood, and other wood-based materials. TECHNICAL DATA: - Manufacturer: SICAR / MA.CO.2L - Model: SEGA 300 - Year of manufacture: 2022 - Panel carriage length: 1600 mm - Carriage dimensions: 1600 × 315 mm - Main saw blade diameter: 300 mm - Main saw blade arbor diameter: 30 mm - Scoring saw diameter: 90 mm - Scoring saw arbor diameter: 22 mm - Main saw blade speed: 4500 rpm - Scoring saw speed: 7000 rpm - Maximum cutting height at 90°: 100 mm - Maximum cutting height at 45°: 75 mm - Saw unit tilting range: 0–45° - Maximum cutting width with parallel guide: 1140 mm - Main work table dimensions: 800 × 500 mm - Auxiliary table dimensions: 800 × 860 mm - Auxiliary side table dimensions: 400 × 500 mm - Main motor power: 4.0 kW / approx. 5.5 HP - Power supply: 380 V, 3 phases - Frequency: 50 Hz Bljdpfx Akszxw N Renjn - Machine weight: 380 kg - CE marking EQUIPMENT: - aluminum panel carriage running on ball bearings - scoring saw unit with belt drive - manual lifting and tilting of the saw using knobs - parallel guide on a steel shaft - cast iron guide bracket with micrometer adjustment - extendable crossbeam - cross guide with two reversible stops - saw blade guard with extraction port - emergency stop switch - complete set of auxiliary tables as shown in the pictures The machine is in very good visual condition. Compact and robust panel saw suitable for both a carpentry workshop and the production of custom-made furniture. The machine is available immediately. It is possible to start and inspect it before purchase. We offer assistance with loading and the possibility of arranging transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior appointment. It is possible to test the machine on site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2022, functionality: fully functional, BASIC TECHNICAL SPECIFICATIONS: Working dimensions: - X-axis: 3000mm (practical maximum length is unlimited), - Y-axis: 950mm, - Z-axis: 80mm (maximum workpiece thickness), 250mm from the console. Travel of working axes: - X-axis: 1475mm (1200mm without workpiece handover), - Y-axis: 1550mm, - Z-axis: 225mm; Axis drive system: X-axis: gripper movement via toothed rack, Y-axis: via toothed rack, Z-axis: lead screw Travel speeds: - X axis: 90m/min (with open grippers) / 25m/min (with closed grippers) - Y axis: 90m/min - Z axis: 18m/min. - Required compressed air pressure: 8 bar (at the inlet), 6 bar (min. operating) External dimensions: - Length 2075mm (one module) x Width 2400mm x Height 2274mm Construction: Monolithic steel frame. Machine weight: 1950 kg. MILLING UNIT: - Motor power 12kW (S6 class, max. power at 12,000 rpm) - Spindle speed 1,000-24,000 rpm (controlled via a frequency converter), - Motor cooling is air-cooled. Bearings are ceramic. - Pneumatic tool clamping, HSK-F63 type, via a tool magazine (collets with a diameter of 0-20mm, ERG-32 type). - Pneumatically controlled extraction hood in 2 positions - Maximum tool weight is 7.5kg (depending on the spindle speed). Blsdpfozp Nzgex Aknjn Drilling unit with built-in saw in the X-axis, model DH-17 6H 1S. - UPS system for uninterruptible power supply - Barcode reader - wireless - Device for automatic tool length measurement - Optical display of machine status on the console - Additional sealing on all guides - Air cushion on the inlet and outlet table - Workpiece placement at the rear of the machine - Larger drilling unit DH25 8H 1S (25 drills) - Additional pneumatic front support for longer workpieces

Condition: excellent (used), functionality: fully functional, Premium Sale – Altendorf F 90 Sliding Table Saw (Germany) Industrial Precision. German Engineering. Proven Reliability. For sale: Altendorf F 90 professional sliding table saw, manufactured in Germany in 1994 by Wilhelm Altendorf Maschinenbau – a globally respected name in high-precision woodworking machinery. Bsdpfx Aksyn Ir Nonsln This is a heavy-duty industrial machine, engineered for continuous operation in furniture manufacturing, carpentry workshops, and joinery plants. ⸻ ⚙ Technical Specifications: • Model: F 90 • Year of Manufacture: 1994 • Maximum Blade Diameter: 450 mm • Voltage: 400V / 3-Phase • Current: 11.5 A • Frequency: 50 Hz • Main Motor Power: 5.5 kW • Main Motor Manufacturer: EMOD • Country of Origin: Germany ⸻ ✨ Why Choose This Machine? ✔ Outstanding cutting accuracy ✔ Exceptionally robust industrial design ✔ Smooth and stable sliding table operation ✔ Powerful 5.5 kW motor for demanding tasks ✔ Optimized for high-volume production ✔ Long service life – built to withstand decades of intensive use Altendorf machines are recognized worldwide for their precision, reliability, and strong resale values. This model is a reliable investment for demanding woodworking professionals. ⸻ 🪵 Ideal Applications: • Furniture manufacturing • Cabinetmaking • Custom interior solutions • Panel processing (MDF, particleboard, plywood, solid wood, laminated panels)

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 1600 mm - Cutting width with parallel guide 1250 mm - Sawtooth blade ⌀350 mm Blsdpozrk N Rsfx Aknon - Arbor flange diameter 87.5 mm - Table fence adjustable to 90° – 45° angle, accuracy ±1° - Max. cutting height with ⌀300 mm blade, 95 mm - Max. cutting height with ⌀350 mm blade, 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Dimensions of folded machine 2020x3380x1200mm Net price: 16000 PLN Net price: 3721 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in case of significant exchange rate fluctuations)

Condition: used, SCM SI400n sliding table saw Table extension: 200 cm, Bodpfeznbcmsx Aknoln Main motor: 7.5 kW, Scoring saw, manually adjustable, Max. cutting width from the right side: 1670 mm, Tilt: 0-45 degrees, manually adjustable, Blade height adjustment: manual, Max. blade diameter: 400 mm, 3 blade speed settings.

Condition: used, Year of construction: 2019, Panel saw Manufacturer: Holzmann Model: K5-320VFP-2000 Blodpfxszuy Ris Aknjn Year of manufacture: 2019 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Technical specifications: Bedpjy Akdrefx Aknjln - Sliding table 2000 mm - Extension table 1100 mm - Mitre fence 1300 mm - Angle stop index - Saw blade tiltable 90–45° - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 202 mm, cutting width (max.): 1,250 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 2,800 rpm, total length: 3,200 mm, Equipment: CE marking, saw blade guard, Format 4 Panel Saw Kappa 550 Power Drive Bsdpfxoy Hk Swe Aknjln - 11 kW, speeds 2800-4000 rpm - Year of manufacture: 2009 - Power Drive control system - Positioning control for height adjustment: 202 mm - Positioning control for tilt adjustment: 90°–45° - Crosscut fence 3200 mm, 2 fence stops - Outrigger table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Cutting width 1250 mm - Overhead guard, extractable and height adjustable, can be swung out of the working area (not shown in the pictures but available) - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and angle adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg Price ex location Transport available at extra charge!

Condition: good (used), Year of construction: 1996, functionality: fully functional, Circular saw SICAR EXPRESS 32 year of construction 1996 S/N 800066 Manufacturer SICAR Italy Aluminum sliding carriage 1600mm main saw motor 5,5hp ( 4,0kW ) motor independent scoring motor 0,55kW Blades with 300/350/400 mm Cutting height of 110 mm at 90° and 80 mm at 45°. Manual tilt and height adjustment Inclination of main saw blade and scoring blade reaches 45° Extra ruler for angular cuts Workpiece hold-down device Top extraction also for 45° cuts Voltage 380 V, 50 Hz. Bsdpfx Astw D Tbekneln CE marked 720 kg Technical data subject to change

Condition: excellent (used), Clearance height 90 cm, weight 478 kg, angle adjustment, table length 220 cm, motor 5 kW, cutting height 10 cm. Bljdpfx Akszkkqxenon

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 3.6 kW (4.89 HP), Sanding belt width 150 mm, sanding belt length 2000 mm, table manually tiltable Bljdoy D Du Hepfx Aknjn

Condition: excellent (used), 4 kW motor, feed unit, cutting height 9 cm, passage height 125 cm, table length 157 cm. Bljdpfx Aksy S U D Ujnen

Condition: like new (used), Year of construction: 2025, For sale is a used JET panel saw JTS-600XL with a maximum cutting length of 1600 mm. The machine was only briefly used for demonstration purposes in our showroom and is therefore in as-new condition. Technical data: - Motor: 230 V / 1.5 kW / 2 HP - Saw blade speed: 4000 rpm - Saw blade diameter / bore: 250 / 30 mm - Saw blade tilt: 0° – 45° - Max. cutting depth at 0°: 80 mm - Max. cutting depth at 45°: 54 mm - Max. cutting width at rip fence: 610 mm - Table dimensions: 800 x 350 mm Bjdpoy Nm H Aofx Aknjln - Table extension: 415 x 350 mm - Table widening (right): 800 x 270 mm - Precision sliding table: 1600 x 255 mm - Max. cutting length: 1600 mm - Machine dimensions: 1650 x 2200 x 1100 mm - Weight: 157 kg Scope of delivery: - Sliding table 1600 x 255 mm - Circular saw blade Ø 254 x 30 x 3 mm - 36 TCT teeth - Parallel fence - Support table 460 x 600 mm with extendable crosscut fence 2200 mm - Extraction port Ø 100 mm The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: used, Year of construction: 1989, Circular saw Manufacturer: Martin Type: T 72 Year of manufacture: 1989 Technical data Saw blade min. 200 mm Saw blade max. 450 mm Rotational speed 2800/4000/5500 RPM Voltage 380 V 50 Hz Bljdpfxezuyx To Aknon Rated current 18.0 A Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, CORMAK PS12E-2000 Panel Saw with Scoring Unit The CORMAK PS12E-2000 panel saw with scoring unit is a solid and precise woodworking machine designed for cutting furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its dual cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without chipping or splintering, which is essential in furniture production and interior finishing applications. Main Advantages of the Machine Dual cutting system: main blade + scoring blade – eliminates the risk of laminate tearing and ensures clean edges. Stable cast iron worktable – provides precision and rigidity even under heavy loads. Large 2000 mm sliding table – designed for cutting large-size workpieces. Powerful 3.8 kW (400V) motor – enables effortless cutting of even hard materials. Adjustable cutting angle up to 45° – allows precise bevel cuts without loss of accuracy. Precision side fence – equipped with an accurate scale for repetitive cutting operations. Dust extraction system – efficient removal of sawdust improves cleanliness and workplace safety. Complete standard equipment – includes scoring blade, measuring guides, blade guard, angle indicator, and accessories. Bsdpfx Akovuf Tmenoln Construction and Technology The construction of the CORMAK PS12E-2000 panel saw is based on a precision-ground cast iron table and a bearing-mounted sliding table with support, ensuring stability and full control over the material during cutting. High-quality guide rails provide smooth and accurate table movement, while the reinforced machine body minimizes vibrations. The ergonomic front-mounted control panel allows convenient adjustment of cutting height and blade angle. The blades are driven by a 3.8 kW motor, providing sufficient power reserve for demanding applications and difficult-to-cut materials. Precision and Work Efficiency The CORMAK PS12E-2000 panel saw with scoring unit has been designed for high repeatability and accuracy. Cutting depth and angle adjustments are carried out using locking adjustment knobs, increasing both safety and operator comfort. High blade speeds, including up to 5800 rpm for the scoring blade, enable fast and clean cuts without burning or damaging the material surface. Applications This panel saw is designed for: Professional woodworking workshops Furniture manufacturing companies Custom woodworking businesses Prototype production departments It is ideal for daily production, dimension cutting, and complex projects requiring precise angled cuts. It is the perfect solution wherever cutting accuracy, edge quality, and reliability are essential. Standard Equipment Main cutting blade Scoring blade Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade angle indicator Eccentric clamp User manual EC Declaration of Conformity Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width on right side 1260 mm Saw blade tilt range 45° Cutting height at 45° 80 mm Cutting height with 315 mm blade at 90° 100 mm Cutting height with 300 mm blade at 90° 95 mm Maximum main blade size 315 × 30 mm Maximum scoring blade size 100 × 20 mm Main blade speed 4500 rpm Scoring blade speed 5800 rpm Motor power S1/S6 3.8 kW / 6.1 HP Power supply 3-phase, 400V Weight 275 kg Warranty 12 months Technical documentation (DTR) Included CE Declaration Yes

Condition: new, Year of construction: 2026, The CORMAK PS12E-1600 panel saw with scoring unit is a solid and precise panel saw designed for working with furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its two-axis cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without tear-out or chipping, which is crucial in the production of furniture and finishing elements. Main Advantages of the Machine Dual cutting system: main blade + scoring blade eliminate the risk of laminate delamination. Stable cast-iron worktable: ensures precision and rigidity even under heavy loads. Large 1600 mm sliding table: designed for cutting large-format components. High-performance 3.8 kW (400 V) motor: enables effortless cutting of even hard materials. Adjustable cutting angle up to 45°: allows angled cuts without compromising accuracy. Precision side fence: equipped with an accurate scale for repetitive cutting. Bledpfx Ajvuf Uqjknon Dust extraction: effectively removes dust and keeps the workstation clean. Complete standard equipment: includes, among other things, a scoring blade, measuring fences, blade guard, and tilt indicator. Construction and Technology The construction of the saw is based on a ground cast-iron worktable and a bearing-mounted sliding table with a support, ensuring stability and full control over the material during cutting. High-quality guides enable smooth movement, while the reinforced body construction eliminates vibrations. The control panel, ergonomically positioned at the front of the machine, provides convenient adjustment of the cutting height and cutting angle. The blades are driven by a 3.8 kW motor, which provides a substantial power reserve when processing difficult materials. Precision and Work Efficiency The CORMAK PS12E-1600 table saw with scoring unit has been designed with high repeatability and accuracy in mind. The cutting depth and angle are adjusted using lockable adjustment knobs, which increases safety and operating comfort. The high rotational speed of the saw blades (up to 5800 rpm for the scoring blade) enables fast and clean cuts without causing a burning effect on the material. Standard Equipment Saw blade Scoring blade Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade tilt indicator Eccentric clamp Polish-language manual EC Declaration of Conformity Optional Equipment Saw blades with different diameters and tooth configurations Trolleys for large-format materials Dust extraction systems Side and rear table extensions Technical Data: Sliding table length [mm] 1600 Cutting width on the right-hand side [mm] 1260 Saw blade tilt [°] 45 Cutting height at 45° [mm] 80 Cutting height with 315 mm circular saw blade installed at 90° [mm] 100 Cutting height with 300 mm circular saw blade installed at 90° [mm] 95 Maximum saw blade dimensions [mm] 315 x 30 Maximum scoring blade dimensions [mm] 100 x 20 Main saw blade speed [U/min] 4500 Scoring blade speed [U/min] 5800 Motor power [S1/S6] 3.8 kW / 6.1 HP Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12 Manual (DTR) YES CE Declaration YES

Condition: new, Year of construction: 2026, The CORMAK PS12E-3000 is an industrial panel saw with a scoring unit, designed for intensive operation in woodworking plants, furniture workshops, and production facilities. It is a high-performance machine for precise processing of wood-based panels, MDF, HDF, plywood, and solid wood. Equipped with an advanced cutting system, the PS12E-3000 panel saw enables chip-free operation, even when performing complex angled formatting cuts. Main Advantages of the Machine Precise chip-free cutting – thanks to the additional scoring blade, the panel saw perfectly handles laminated boards, preventing surface damage and chipping. Large 3000 × 270 mm sliding table – the bearing-mounted carriage ensures stable material guidance while maintaining maximum cutting accuracy. Cutting width up to 1220 mm – suitable for large-format panels and oversized workpieces. Angled cutting capability (0–45°) – precise adjustment of the main blade tilt allows a wide range of woodworking applications. High-performance motor – 3.8 kW (S1) power ensures continuous and reliable operation during demanding production tasks. Thought-out ergonomics – convenient control panel, blade height locking system, and connection point for dust extraction. Construction and Technology The construction of the PS12E-3000 panel saw is based on a rigid steel frame resistant to twisting and vibration. The main worktable (800 × 385 mm) and side table (880 × 800 mm) are made from durable materials, ensuring long-term stability and reliability. The sliding carriage moves smoothly on precision guides, allowing accurate positioning and controlled movement of the workpiece. The main cutting blade with a diameter of 315 mm works together with a 100 mm scoring blade, providing excellent results when formatting panels. Blade replacement is quick and convenient thanks to the practical mounting system. Precision and Work Efficiency The PS12E-3000 circular panel saw for wood provides excellent dimensional repeatability and clean cutting edges during every operation. Thanks to high rotational speeds: 4000 rpm – main blade 5800 rpm – scoring blade the machine enables fast and accurate cutting, even in demanding materials. Performance is supported by a powerful drive system and precise adjustment of cutting depth and blade angle. Applications The CORMAK PS12E-3000 panel saw is used in: furniture manufacturing and interior fitting production, professional woodworking and carpentry workshops, cutting prefabricated wood-based panels, precision sizing of structural and finishing materials. It is an ideal solution for companies looking for a machine that combines high power, accuracy, and versatility. Standard Equipment Main cutting blade 305 × 30 mm Scoring blade 90 × 20 mm Support arm and rip fence Worktable extension Mitre fence Blade angle indicator Eccentric clamp Technical Specifications Parameter Value Sliding table dimensions 3000 × 270 mm Main table dimensions 800 × 385 mm Side auxiliary table dimensions 880 × 800 mm Cutting width 1220 mm Saw blade tilt range 0–45° Cutting height at 90° 100 mm Cutting height at 45° 80 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 100 mm Bedpfx Aovugc Asknoln Main blade speed 4000 rpm Scoring blade speed 5800 rpm Motor power S6 5.3 kW / 7.1 HP Motor power S1 3.8 kW / 5.1 HP Power supply 400 V Weight 309 kg