Used Vertical panel saws for sale (101)

Condition: used, Year of construction: 1996, Cutting length: 5300mm Cutting height: 2100mm Cutting depth: 60mm Scorer: no Feed: manual Horizontal cut display: Scale Vertical cut display: Scala Saw blade diameter: 300mm Evasive material support: yes Saw blade speed: approx. 4000 rpm Codkauiyu Motor power: 3 kW Machine length: 6500mm Machine depth: 1500mm Machine height: 3000 mm weight: 800kg

Condition: used, Year of construction: 2021, 3 kW motor power, weight: 700 kg, max. cutting depth: 60 mm, max. cutting length 4,100 mm, max. cutting height: 2,200 mm. Fzjchlc

Condition: used, Year of construction: 1999, Machine/vehicle number: 28835, max. Schnittbreite : 5300 mm max. Schnitthöhe hor. : 2100 mm max. Schnitthöhe vert. : 2200 mm max. Bearbeitungsdicke : 80 mm Sägeblattdurchmesser : 300 mm Sägeblattbohrung : 30 mm Auflage unten : Rollen starr Materialauflage : Alu-Lattenrost mit Kunststoff-Auflagen Kleinteilauflage : Ja Cmvwqsrd0O Messsystem : Skala Schwenkung Sägekopf : manuell Befestigung : freistehend Motorleistung : 5,5 kW Absaugdurchmesser : 100/120 mm

Condition: good (used), Year of construction: 2004, Cut capacity 3300 x 2060 x 80mm 300mm max blade dia 3kw motor Overall floor area [ freestanding on legs ] 4451mm long x 2859mm high x 1598mm wide. Serial nr - 35111 Year - 2004 CE [ purchased refurbished 2021 ] Complete with Alko Mobil Jet 160H Dust Unit 160mm inlet dia 2.2kw motor Max flow rate 2,000m3/hr Filter area 9.1m2 Dpm0Er Year - 2021 CE

Condition: used, Year of construction: 2010, Machine/vehicle number: 100319, Schnittbreite 4300 mm C93Bfiu Schnitthöhe: 2150 mm Schnittiefe: 55 mm Sägeblatt-Durchmesser: 250 mm Motor: 3 kW Drehzahl: 5100 U/min Verlademaße ca.: 5510 x 2580 x 1000 mm Gewicht: ca. 900 kg Lagerort: Nattheim

Condition: used, Year of construction: 2019, 1 piece panel saw, GMC type GMC 3-ALUM, year 19, serial no. 22932, max. 7,000 rpm, panel support approx. 4,000x2,000 mm, motor power 3 kW, saw blade diameter 250 mm T99As7Stpz

Condition: used, Year of construction: 1979, Cutting length: 5300mm Cutting height: 2060mm Cutting depth: 80mm Scorer: no Feed: manual Horizontal cut display: Scale Vertical cut display: Scala Saw blade diameter: 300mm Evasive material support: yes Saw blade speed: approx. 4000 rpm Dptmap Motor power: 4 kW Machine length: 6500mm Machine depth: 1500mm Machine height: 2660 mm weight: 800kg

Condition: ready for operation (used), Technical characteristics Cutting capacity : 5300 x 2200 mm Cutting thickness : 80 mm Horizontal cutting height : 2100 mm Built-in suction device Manual or automatic feed 4 feed speeds Intermediate support along entire length of frame 2 reference stops liftable frame for horizontal cutting Power and Motors Cnk8Mizl8S Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Overall dimensions

Condition: good (used), Brand: Striebig Model: Econom 520 6 E/G Machine no: 43941 N7Vrg7U9Yd Tech data: Horizontal saw length: 4250mm Vertical saw length: 2350mm Max sawing depth: 85mm Blade diameter: 300mm Motor: 3Kw, 50Hz, 400V, 3-phase Stock no: 2001739

Condition: used, Year of construction: 2004, Striebig Control 6224 Dpsvnl - ATTENTION - Digital stop element not available .

Condition: used, Year of construction: 1991, Machine/vehicle number: 3.382, Lagerort: Lieferant Gxcw0Ne

Condition: excellent (used), Year of construction: 1998, Striebig Standard III TRK 5220 A Year of construction 1998 Saw blade 300mm Maximum cutting width 4300 mm Maximum cutting height horizontal 2100 mm Maximum vertical cutting height 2200 mm Maximum cutting depth 80 mm Speed 4750min- 17kW 380V Horizontal and vertical cutting Overall dimensions 5700x1800x3015mm (LxWxH), weight 915kg Cub97Ummtu

Condition: excellent (used), Year of construction: 1995, Panel saw SVP 620 Year of manufacture 1995 Bhfw3Wn Vertical cutting height 1930 / 2130 mm Horizontal cutting height 1880 / 2080 mm Cutting length 4200 mm Max. cutting depth 45 Engine power 3PS Saw blade diameter 250 mm Net weight approx. 480 kg

Condition: ready for operation (used), Technical characteristics En cours de vérification Cutting dimensions : 4500 mm x 4300 mm Max. blade projection from work surface (cutting height): 90 mm Main blade max. diameter 320 mm, 7.5 kW motor (to be confirmed) Scoring blade, max. diameter 150 mm, electronically adjustable CN adjustable blade carriage speed up to 150 m/min Pusher feed up to 70 m/min 4 Air-cushion unloading tables, 1800x 500 mm 9 pneumatic clamps PC-based control, updated Maestro software Remote cycle start control Dpn9Wx Electronic slot design Optimized blade/pressor travel Ottimo Perfect Cut optimization, 3D simulator Network and/or USB connection In option : vacuum lifting device, panel gripper. Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Weight: 4800 Kg

Condition: excellent (used), Top maintained Striebig 6220 1984 little used 5200/2200 80 mm wall model silent version Chiedq2Lsw

Condition: reconditioned (used), Year of construction: 1997, Operating hours: 15,713 h, Functionality: fully functional, Machine/vehicle number: 27349, STRIEBIG Standard III TRK 6220 A Vertical panel saw Used machine serial no. 27349, year 1997 Item number: JA_G240501 Machine description Cutting length 5300 mm Vertical cutting height 2200 mm Horizontal cutting height 2100 mm Cutting depth 80 mm Max. Saw blade 300 mm Power 400V / 50 Hz 5.5 kW Speed 4750 rpm Scoring unit ---- Slatted frame evasive Yes Hu2Unh0 Clamping transport rollers Yes Strip ash 600 mm Suction 160 mm Weight approx. 915 kg Dimensions (WDH) 6665 x 1420 x 3015 mm Condition / work carried out - Machine cleaned - Machine function-tested - Signs of use due to age and use - Available from stock - Spare parts according to appendix Subject to errors and changes to technical features. Note used goods: - Prices are collection prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (unless otherwise stated) - Subject to prior sale! - You will receive an invoice with VAT shown. - All items are purchased as seen, without any warranty claims. The buyer is free to inspect the items on site. - Our general terms and conditions apply. - Special agreements are only possible by written agreement. - Any items in the background of the picture are not included in the scope of delivery. - Saw blades are for illustration purposes only and are not included in the scope of delivery. Shipping options: - We will be happy to make you a transportation offer. - Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. (Assembly and instruction of the goods for demonstration purposes is optionally possible by arrangement). - Optionally, our trained service personnel can set up the machine at your premises and give you a short briefing. Travel, travel and service times at an extra charge.

Condition: used, Year of construction: 2015, Machine/vehicle number: 15140015, Schnittbereich 5300 x 2100 mm digitale Anzeigen X u. Y Lagerort: Lieferant Ubakazakvj

Condition: ready for operation (used), Technical characteristics En cours de vérification Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Cnk7Opdzoi

Condition: used, Year of construction: 2009, Machine/vehicle number: 3642/0-909, Schnitttiefe: 60 mm Schnittlänge: 4300 mm Schnitthöhe: 2100 mm Dptpb9 Motorleistung: 4 kW Sägeblattdurchmesser: 250 mm Sägeblattdrehzahl: 5450 min/1 Luftbedarf: 1400 m³/h Absaugstutzen: 120 mm + 100 mm Lagerort: Lieferant

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Power: 4,4 Kw Overall dimensions Lenght: 6620 mm Width: 3035 mm Height: 1741 mm Cnk9Kco8O3 Weight: 1200 Kg

Condition: ready for operation (used), Technical characteristics Cutting area 4600 x 2070 x 60 mm Cnlbfv0Dpq Motor 3 kW Blade diameter 250 mm Power and Motors Pluging: Three-phased Power: 3 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics Description : SELCO panel saw TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table Principal technical characteristics Max cutting length : 5600 mm Max auxiliar pusher course : 4300 mm Max blade height from table level : 122 mm Max clamps opening : 110 mm Lifting table with direct loading : 5600 x 2200 mm Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm Main blade motor 18,5 kW / 50Hz (25 Hp) Incisor blade motor 2,2 kW / 50 Hz (3 Hp) Brushless motor for blade chariot - Speed 1 -150 m/min Brushless motor for main pusher – Max speed 100 m/min 2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm) Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER Main blade Ø 430 mm Incisor blade Ø 200 mm 4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line) 4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line) 4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line) Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands 4 air cushion tables Dpn9Xl 4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation Lifting loading table Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option). Automatic cut panels evacuation Heavy single structure, Industrial chassis, strong stability Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés Pressor group Lateral alignment group with 2 independent rollers The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation PC Windows XP, 17" screen With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings Software and applicancies: "OPTIPLANNING" Pro Version software : Great number of cutting lists (including different types of material) allowing “all at once” optimization "IMPORT FILE" function Editing on external device and import files on machine PC. Automatic management of panel piles and waste material Panel stock and

Condition: ready for operation (used), Technical characteristics Cutting dimensions: 3800 x 3800 mm Max. blade projection from work surface (cutting height): 80 mm Main blade max. diameter 320 mm, motor 7.5 kW Scoring blade max. diameter 200 mm, motor 2.2 kW Blade carriage speed adjustable from 5 to 60 m/min Pusher feed up to 40 m/min Cnlah3Eq9G Automatic lateral alignment device 4 air-cushion unloading tables, dimensions 2000 x 650 mm with rounded profile 6 pneumatic grippers (positioned at 50-360-990-1740-2490-3240 mm) Windows PC-based control 3800 mm pusher stroke Remote Start cycle pusher, including emergency pusher Kit for automatic blade protrusion and controlled presser opening QUICK CHANGE device (quick blade release) DIGISET function Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions Weight: 3950 Kg

Condition: ready for operation (used), Technical characteristics Cutting dimensions : 4300 x 4300 mm Max Cutting height : 125 mm Dpn9Xb Main blade max. diameter 450 mm Motor 13.5 kW Scoring blade max. diameter 150 mm Motor 2.2 kW Blade carriage speed adjustable from : 10 to 125 m/min Pusher feed : 10 to 80 m/min Automatic lateral alignment device 3 air-cushion loading tables 7 pneumatic clamps Windows PC-based control CADmatic software Easy access for maintenance and blade change Quick blade change Suction requirement : 5000 m3/h Power and Motors Voltage: 400 V Pluging: Three-phased Power: 35 Kw Overall dimensions Lenght: 6900 mm Width: 8200 mm

Condition: ready for operation (used), Technical characteristics Semi-automatic sawing process Maximum main blade diameter: 300 mm Blade rotation speed: 4750 RPM 5.5 kW motor Scorer (VSA) Maximum cutting capacity : Cutting length: 5300 mm Vertical cutting height: 2200 mm Horizontal cutting height: 2100 mm Cutting depth: 80 mm Dpn9Wn Digital stop Suction connection diameter: 160 mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 6765 mm Width: 1813 mm Height: 3015 mm Weight: 990 Kg