1
Technische Daten:
fly wheel DM 800 mm
Max. cutting height 400 mm
Max. max cutting width 780 mm
tabel dimensions 580 x 810 mm
tildable table 15 Grad
Max. saw blade dimension 80 x 0,8 mm
saw blade length 5380 - 5530 mm
motor 11,0 kW, 400 V, 50 Hz
suction 2 x 100 mm
fly wheel speed 680 U/ min
suction DM 1 x DM 100 mm & 2 x DM 120 mm
compressed air 6 - 8 bar
machine weight: ca. 850 kg
machine dimensions L x B X H 1550 x 950 x 2500 mm
welded steel structure, fully closed
pneumatic brake
table i...
10
Flywheel diameter 900mm
Floor standing machine No foundation
Bzagf9xb9i
Double roller drive Yes
Variable speed drive
Engine 30hp
Electric blade tension
Year 2009
Voltage 380V
Weight +- 2500kg
5
Condition: Unused.
Cutting height 370 mm
Cutting widht 680 mm
Roll diameter 700 mm
Ypyb3w
Table size 690x750 mm
Motor 380V.
MARCELS MASCHINEN CH
5
new Bandsaw
Stenner VHE 137
flywheel 1.370mm
max. Sawbladewidth 200mm
Fa80uxstk
max. sawing dimensions 300x300mm
linespeed 30-120 m/min.
weight 8,5 tons
1
neu
ca. 10 Wochen ab Auftrags
Türkei
37100
686.35
8200x41x1,3 mm
20-100 m/min
810 mm
750 mm
910x750 mm
rund 600 mm, quadrat 600
rund 360 mm, quadrat 360
725 mm
0.12 kW
4 kW
4020 mm
1600 mm
2450 mm
3970 kg
hydraulic vice
digital readout for scale of bending angle
hydraulic clamping of sawing arm
turning of sawing arm by hand
continuously variable down speed of sawing arm
automatic sawing frame lifting after cutting
sensitive cutting pressure adjustment subject to m...
13
Band sawSAC BW 800
Year of construction 1995
Poqbn
Wheels 800mm
3phase 220V *
cutting diameter 300 mm
capacity 90 degrees: flat 330 x 260 mm
capacity 90 degrees: square 260 x 260 mm
capacity 45 degrees: flat 270 x 200 mm
capacity 45 degrees: round 250 mm
capacity 45 degrees: square 250 x 250 mm
capacity 60 degrees: flat 170 x 170 mm
capacity 60 degrees: square 170 x 170 mm
B3vxwppt
capacity 60 degrees: round 180 mm
turning speed range: 40 / 80 m/min
saw band length 3320 x 27 x 0,9 mm
weight of the machine ca. 640 kg
Furnishing:
- autom. Saw bow lowering, with infinitel...
5
cutting diameter 280 mm
saw band length 3320 x 27 x 0,9 mm mm
cutting width 330 mm
Control Evolution TS 50
band speed 15 - 100 m/min
capacity 90 degrees: round 280 mm
capacity 90 degrees: square 260 x 260 mm
capacity 90 degrees: flat 330 x 260 mm
capacity 45 degrees: round 260 mm
capacity 45 degrees: square 250 mm
capacity 45 degrees: flat 270 x 200 mm
capacity 60 degrees: round 180 mm
capacity 60 degrees: square 170 mm
capacity 60 degrees: flat 170 x 170 mm
total power requirement 2,2 kW
weigh...
15
Feeding speed: 10-90 m/min,
Saw width: 100-180,
Saw thickness: 1,0-1,3 mm,
Diagonal sawing up to: 45 degrees,
Electric motor: 45 kW,
Weight: 6000 kg.
The band saw is in working order.
Gopbtaa2s
cutting diameter / mm
saw band length 5800 mm
cutting width / mm
- The saw is functional.
- The display on the control cabinet is defective, but it was not functioning
- Documents available
Program: 03702A Version 01
Initial length: max. 14000mm
Saw band size: 5800x50x1.3mm
miter
75 ° 400 x 430 mm (WxH)
60 ° 330 x 430 mm (WxH)
45 ° 230 x 430 mm (WxH)
Dimension roller conveyor:
Buyfrh7kkg
1. Roller conveyor
Length: 6350mm
Total width: 1400mm
Height: 790mm
2. Roller conveyor
Length: 9100...
3
neu
ca. 10 Wochen ab Auftrags
Italien
10600
198.22
3270x27x0,9 mm
40/80 m/min
300 mm
300 mm
350x260 mm
rund 210 mm, quadrat 210
rund 110 mm, quadrat 110
830 mm
1,5 kW
1500 mm
1600 mm
1900 mm
590 kg
hydraulicvice
saw beam moves up and down by hydraulic cylinder
fast descent
automatic fast up/down conrolled by feeler pin
adjustable pressure according to section and type of material
double safety buton for cycle start
2 speeds
coolant equipment
_CUTTING CYCLE_
Vice l...
11
band saw
Pnsdj
Centauro Compact 800 NLWheels 800mmSerial number 0271Max cutting height, to bottom of guide, 440mmMax cutting width, from column to saw band, 790mmTable width 800mm
1
Flying band saw diam. 600mm. 258 cm high.
By3wnwzkii
9
cutting diameter 240 mm
capacity 90 degrees: square 200 x 200 mm
capacity 90 degrees: flat 285 x 200 mm
capacity 45 degrees: flat 200 x 200 mm
capacity 45 degrees: round 200 mm
capacity 60 degrees: round 130 mm
capacity 60 degrees: square 130 x 140 mm
dimensions of saw-band 2965 x 27 x 0,9 mm
cutting speed 35 + 70 m/min
B3vofj2s
work height max. 940 mm
total power requirement 1,3 kW
weight of the machine ca. 290 kg.
range L-W-H 1.250 x 1.500 x 1.700 mm
Furnishing:
- Miter cuts left 60 ° + rig...
2
Vertical band saw machine make PEHAKA type SH 9 spec.
Bq3pqusifj
Machine # 276361390
Technical data:
Roll diameter 900 mm
cutting height (lower guide) 520 mm
cutting width 880 mm
Table size without rear table 850 x 900 mm
belt speed 1650 m/min
gr. blade length 6250 mm
engine power 7,5 PS
weight approx. 1100 kg
with
- guide under the table
- table adjustment by handwheel 5° left
45° right according to scale, 1° division
Clamping and releasing with foot pedal
- scale with 0,1° graduation
- aut...
2
Code: 0465
Brand: CENTAURO
Model: CL 700 - CE Standard
Cast iron band saw - CE standard
Technical data
Cast iron base with full fairing
Saw wheel diameter mm 700
Max cutting height mm 400
Svgpqk
Table size mm 1030 x 710
Max/min blade length 5085/4945
Motor Hp 4
Tilting table 20 degrees
Suction mouth mm 100
Overall dimensions mm 1340 x 900 x 2300 h
Weight kg 640
3
neu
ca. 10 Wochen ab Auftrags
Türkei
30900
571.65
8200x41x1,3 mm
20-100 m/min
810 mm
810 mm
850x810 mm
rund 480 mm, quadrat 480
585 mm
0.12 kW
1.5 kW
4 kW
3900 mm
1200 mm
2350 mm
3080 kg
blade brush
control panel
hydraulic vice
hydromechanical blade tension
Piyip
inverter
linear way
material limit shaft
height adjustment
pressure adjustment
coolant pump
saw blade
security switch
gearbox
1,2 meter roller table
user manual in GERMAN or ENGLISH
OPTION:
turn table for...
11
Band saw
Ascom 800Wheels 800mmSKH approvedMaximum cutting height for guide rail 450mmTable width 750mmMaximum cutting width (Band to column) 780mm
Pvzq9a
Includes 5 band saws
9
Flexible horizontal band resaw with tiltable conveyor
Modern resaw with impressive features :
Cast iron dynamicly balanced wheels
Hydraulic blade tension
Inverter controlled feed system
Automatic pressurised lubrication system with reservoir tank
External control panel
18.5 KW motor - latest IE-3 energy efficient
Bx70pm9gvi
Tilting conveyor up to 45 degrees
* very suitable for shiplap cladding, wall cladding *
Maximum material size (W X H): 300mm x 300mm
Feed speed (variable): 0~18 m/min...
1
cutting diameter 280 mm
saw band length 3320 x 27 x 0,9 mm mm
cutting width 330 mm
Control NC
capacity 90 degrees: flat 330x 260 mm
capacity 90 degrees: square 260 x 260 mm
band speed 15 - 100 m/min
total power requirement 2,2 kW
weight of the machine ca. 1,24 t
Fb8uhfx
dimensions of the machine ca. 3,3 x 2,83 x 2,23 m
2
Vertical band saw machine make PEHAKA type SLA 8
machine number 31540 30211
K7qbx
for non-ferrous metals, wood, plastics
technical data:
Roll diameter 800 mm
throat 760 mm
cutting height approx. 490 mm
table size 790 x 815 mm
belt speed 1200 m/min
gr. blade length 5950 - 6200 mm
belt width 12 - 25 mm
motor power 5,5 kW
weight approx. 900 kg
outer dimensions approx. 900 x 1900 x 2720 mm
used, in good condition
4
BAND SAW - PRIMULTINI 1100
Cast iron flywheels diameter 1100 mm
Blade width 130 mm
Wzuykglj
Feeding speed adjustable
2
neu
ca. 10 Wochen ab Auftrags
Türkei
82500
1509.75
9600x54x1,6 mm
20-100 m/min
800 mm
800 mm
1300x750 mm
rund 800 mm, quadrat 770
rund 570 mm, quadrat 570
rund 800 mm, quadrat 770
880 mm
0.12 kW
0.37 kW
7.5 kW
5050 mm
2200 mm
2900 mm
6700 kg
Hydraulischer Spannstock
Digitalanzeige für Winkelanzeige
Hydraulische Klemmung des Sägearmes
Sägearmdrehung von Hand
Stufenlos einstellbare Absenkgeschwindigkeit des Sägearmes
Automatische Sägerahmenanhebung nach Schnitte...
12
band saw
Pnscl
Steton SN 700Wheel diameter 700mmMax dimension between band saw and column 670mmMax cutting height to bottom of guide 475mmTable width 650mm
6
horizontal band saw lignum kargowa lignum
Jferpvp
TECHNICAL DATA - number of cutting systems 1 - 360mm horizontal clearance - 520mm vertical clearance - main engine 11kW - 0.55kW feed motor - manual height adjustment of the cutting system - smooth adjustment of the feed speed on the inverter - belt conveyor - length of the band saw 4010mm - width of the band saw 30 -42mm - band saw thickness 0.9-1.25mm - working table length 3030mm - working table width 225mm - max height of the cut material 450...
13
Model Stenner VHE36
Precision resaw with hydraulic centering feed rollers.
Centre, off-centre or dimension sawing possible.
Pulley diameter 915mm
Bypcdazluf
Sawblade width 100mm.
Hydraulic feed roler (height) 200mm
Main motor 18.5kW.
Feed speeds variable - 60m/min
Stenner and not Weinig Waco Ledinek Centauro Canali AKE
15
Band saws: 6
Electric motor each saw: 75 kW
Bandsaw line
6 twin saw line AKE 1600, the last 7 band saw is quattro are AKE 1600 with Canalli built in 2001
- band saw wheel diameter 1600
- width 200 mm
- electric motor each saw 75 kW
- year of manufacture 1979 - 2001
- weight about 15 t
- with electrical cabinets
- sawmill capacity 150,000 m3 / year 1 shift
The line is partially dismantled
The line has no log feed
Currently available from the line is
- first twin saw (log)
- second twin saw withou...
1
cutting diameter 330 mm
capacity 90 degrees: flat 510 x 320 mm
capacity 90 degrees: square 320 x 320 mm
turning speed range: 40 / 80 m/min
dimensions of saw-band 3440 x 27 x 0,9 mm
engine output 1,5 / 1,8 kW
Fe799ob
weight 670 kg
1
neu
ca. 10 Wochen ab Auftrags
Italien
6800
129.2
2450x20x0,9 mm
35/70 m/min
220 mm
200 mm
250x150 mm
rund 160 mm, quadrat 140
rund 90 mm, quadrat 90 mm
800 mm
0.7 kW
1330 mm
1300 mm
1880 mm
350 kg
hydraulicvice
saw beam moves up and down by hydraulic cylinder
fast descent
utomatic fast up/down conrolled by feeler pin
adjustable pressure according to section and type of material
double safety buton for cycle start
2 speeds
coolant equipment
_CUTTING CYCLE_
Vice lock...
8
Passage width 780mm
Passage height 380mm
CE Standards Ok
Engine 5.5kw
Year 2008
Voltage 380V
Type MOG
Flywheel diameter 800mm
Parallel guide Yes
Max width of the ribbon 45mm
Star-delta start
Table size 1120/720mm
Table extension 850/250mm
Blade tension Manual
9k7drsjg
Weight +-575kg
4
•The machine is designed exclusively for cutting soft, hard, dry, raw or frozen timber or wooden prisms, with lengths according to the machine designs
•the cutting length depends on the number of expanding sections
•all types of timber can be cut with the same band
•solid and twist free construction
•low level of required maintenance
K7arpxbd
•easy handling
•massive cast iron drive wheel
•eccentric clamp system
•manual height (thickness) adjustment
•manual cutting feed
•3,7 m cutting length base...
2
Stenner resaw type VHM-36.
Including in - and outfeed conveyors.
Two lifting also tables included.
Byacl2djsp
15
Offered is a used, functional band saw.
Technical data:
Year of manufacture: 1978
Machine number: 4392
roll diameter: 800 mm
Byaoixb9sn
projection: 800 mm
installation height: 500 mm
table size: 1200 x 900 mm
Motor power: 1430 rpm
Total power requirement: kW
machine weight approx.: 950 kg
space requirement approx.: 1500 x 1100 x 2400 mm
Control: conventional
1
cutting diameter 280 mm
capacity 90 degrees: flat 380 x 260 mm
capacity 90 degrees: square 260 x 260 mm
Puc7ka
turning speed range: 40 / 80 m/min
dimensions of saw-band 3440 x 27 x 0,9 mm
engine output 1,5 / 1,8 kW
weight 670 kg
5
neu
ca. 10 Wochen ab Auftrags
Türkei
22300
417.01
3660x27x0,9 mm
20-100 m/min
320 mm
320 mm
350x320 mm
rund 160 mm, quadrat 150
rund 260 mm, quadrat 180
rund 300 mm, quadrat 250
740 mm
0.12 kW
1.1 kW
2.2 kW
2100 mm
2200 mm
1500 mm
1660 kg
blade brush
NC control panel
hydraulic vice
hydromechanical blade tension
inverter
coolant pump
saw blade
security switch
gearbox
F9z2tq2
height adjustment
user manual in GERMAN or ENGLISH
OPTION:
hydraulic blade tentioning...
4
Single bandsaw for splitting roundwood or squares, centering infeed and outfeed conveyors
Oxyrs329
5
Band saw Bansek Agazzani
Model: 700
Year of manufacture: 2005
Byeloe33wn
TECHNICAL DATE:
Wheel diameter: 70cm
Motor 4kw / 5,5kw max
Max. saw length: 5140 mm
Weight: 400kg
8
Fully renovated, log bandsaw quatro, 1500 mm, 90 kw,
Bvcnrubng0
TECHNICAL DATA
• Flywheel diameter mm..: 800
• Working table sizes: 1300 x 800
• Cutting capacity height x width mm.: 380 x 750
Buadoact8f
• Blade width mm.: 80
• Flywheel R.P.M.: 700
• Length of blade, mm.: 5090
• Motor power: 11
• Saw blade speed: 29
• Net weight of machine Kg.: 1350
1
Veneta Macchine Shuttle-P CNC band saw is for sale in Russia.
Good condition.
Delivery to any country. Additional information and photos are available upon request.
Bybngos2og
4
neu
ca. 10 Wochen ab Auftrags
Erzxoobh
Türkei
43900
812.15
5400x41x1,3 mm
20-100 m/min
450 mm
425 mm
610x425 mm
rund 430 mm, quadrat 425
rund 320 mm, quadrat 290
735 mm
0.12 kW
2.2 kW
4 kW
2850 mm
2100 mm
1950 mm
2480 kg
NC control
double column band saw
3° cutting angle
blade brush
control panel
hydraulic feeding vice
hydraulic vice
hydromechanical blade tension
inverter
linear way
optical height adjustment
proximity switch for sensing blade slippage
material li...
8
A. Vertikale Blockbandsägemaschine MEM, Sägerollen 1'400 mm, Baujahr 1982,
-. Motor 75 kw.
-. Sägeblätter 205 x 1.47 Länge min. 9'600, max. 9'900 mm.
-. Hydraulische Spannung, Druckführungen.
B. Blockspannwagen 13 .0m mit 6 fixen Spannböcken, Vorschub pneumatisch
-. Spannböcke verschiebbar 100 mm.
-. Klauenöffnung 800 mm.
-. Max. Abstand Sägeblatt-Spannbock 1'200 mm.
-. 4 Stammheber.
-. 6 Stammwenderflippeurs de dosses.
-. Steuerung Mudata.
-. Wagen hydraulisch.
-. 34.0 m Gleislänge, max. Stamm...
HORIZONTAL BANDSAW WRC 1000 – straight position (not under angle)
Strong welded construction, mechanic - hydraulic equipment, operator seat with visual control of milling – right position WRC 1000
STRONG, ROBUST CONSTRUCTION
Capacity of cutting in m3/8h
- capacity depends on lenght, diameter and type of wood and dimensions of cutted boards, skills of operator etc. MAX. 15
Max diameter of log, cm (W/H)
Max diameter of log - width 1000mm
Max height of log 940mm -1000/940
Max lenght of log 8 m...
6
Diameter of saw wheels 600 mm
Max. cutting height 340 mm
Max. cutting width 580 mm
Table height from floor 920 mm
Table size 580x810 mm
Max.-min. lengthof blade 4580/4520 - 5180/5040 mm
-
Max. width of blade 30x0,6
Motor power 2,2 kW (HP 3)
R.P.M. of wheels 730 R.P.M
Dust extrac. outlet 1 x Ø 100 mm
Overall dimensions 2070x1100x775 mm
Net weight 270 Kg
Gross weight (crate) 330 Kg
Gross weight (case) 370 Kg
Igsoqrat8
Shipping volume 1,7 m3
Sound power level 88.0 db
Horizontal thin cutting bandsaw, very suitable to cut lamella but also universal cutting.
NEW MODEL EXTRA WIDE 1300 MM !
Maximum Workpiece Size 1300 mm (W) x 150 mm (H)
Hfqde7yuw
Saw Wheel Diameter 970 mm
Saw Wheel Width 2"
In-feed Speed 0-8 m/min
Min. cutting Lamella Thickness 5 mm
Main Motor 30.0 kW
Schneider Germany PLC
With touchscreen for easy setting thickness.
Sawinging thin pieces or simply saw a beam in half, everything is possible with these saws.
12
Technical data:
Max cutting height: 450 mm
Mjchubc7
Max cutting width: 670 mm
Wheel diameter: 700 mm
Band adjustment range: 5040-5180 mm
Max belt width: 40 mm
Min tape width: 10 mm
Working table dimensions: 720x1030 mm
Work table tilt: 0-20 °
Extraction port diameter: 110 mm
Engine power: 3 kW
Voltage: 400V
Safety switch
Producer: Centauro
4
neu
ca. 10 Wochen ab Auftrags
Türkei
39600
732.6
5200x34x1,1 mm
20-100 m/min
360 mm
360 mm
610x360 mm
rund 360 mm, quadrat 360
rund 325 mm, quadrat 290
735 mm
0.12 kW
1.5 kW
3 kW
2850 mm
2100 mm
1820 mm
2400 kg
NC control
double column band saw
3° cutting angle
blade brush
control panel
hydraulic feeding vice
hydraulic vice
Bwwzdjg3jb
hydromechanical blade tension
inverter
linear way
optical height adjustment
proximity switch for sensing blade slippage
material l...
2
Söderhamn's Plate infeeder for Bandsaw
Xdkyb22z
Really nice condition, unused.
4
HEADRIG
capacity m3/8h up to 30
Max diameter of log, cm (W/H) 105/94
Max lenght of log 6,5
Main drive motor 30 kW 30 kW
Main wheels – cast steel
Diameter of the main wheels 1050
movement of bandsaw up/down - spindles TR40x7 spindles
Motor for movement of bandsaw up/down 4 kW
blade- lenght 7470, thickness 1,1 mm, width 120mm
Stepless movement of machine back / forward with frequency inverter Omron 1,5 kW+W63
Manual – sensorial setting of cutthickness with automatical switch off, which works i...
8
Welded steel frame
Perfectly balanced cast iron wheels mounted on closed ball bearings
Cast iron table tilting up to 45 ° (20 ° CE) to the right.
Telescopic protective tape guide
Automatic wheel braking (ce): self-braking motor in ø600 / 700 mm and air braking in ø800 / 900 mm.
Motor protection switch with coil release (CE).
The key that locks the door.
Belt tension indicator.
Precise top belt guide.
Bottom belt guide with wooden inserts.
Safety switch (CE): on CO600 / 700 it is located on the c...
Used Band saws
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Sample sales contract for used machines in nine languages
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 220,000 inquiries per month
Machineseeker still biggest sponsors of 2nd German football league
Photo gallery: the 10 strongest forklift trucks in the world
Photo gallery: The World's 10 biggest excavators
