Used Sliding Panel Saw for sale (21,432)

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt Gtodpfoxpvk Iex Ag Tet - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm - table dimension: 115x625mm - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: Gtjdpfx Asg Dgr Hog Tjt • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW Godpfx Agex H S Tie Tjtt - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Gtodsx Sqpmspfx Ag Tjt Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, TECHNICAL DETAILS Max. cutting length: 2,200 mm Max. cutting width: 4,300 mm MACHINE DETAILS Transport packages: 8 pcs. Godjx Tptmjpfx Ag Tstt

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Gtedpfx Agswuz Ire Tst

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: KK00034979, table length: 3,100 mm, total length: 4,000 mm, total width: 4,000 mm, total height: 1,700 mm, overall weight: 850 kg, table width: 360 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 5,000 rpm, input voltage: 400 V, input frequency: 50 Hz, SCM NOVA SI 40 Panel Saw - incl. digital measuring system up to 2000 mm, as well as extraction unit, Manufacturer: SCM, Model: ECO 300 D, Year: 2023, Serial Number: SCM0005771 Note: The saw can be transported on a standard truck. Gtedsx Uy Anepfx Ag Tst Note: The item can be collected from 16.02.2026 onwards on a mutually agreed date. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Gtedpjvwlfbjfx Ag Tjt Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Condition: used, Year of construction: 2003, Cutting range: 5300 x 2240 x 80 mm Motor: 5.5 kW (7.5 HP) Saw blade: 300 mm Vertical cutting distance: 1000 mm Feed speed: 10-25 m/min Four-sided edging Independent pre-scoring saw unit Storage location: Supplier Gtjdex Twdaopfx Ag Tjt

Year of construction: 2018, condition: ready for operation (used), Additional Equipment Main Cutting Disc Motor Power (kW): Max 23 kW Number of Pneumatic Clamps on Pusher: Max. 9 Patented Rotating Support Table This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information. Application Types Gtsdpfx Agox D Iqcs Tjt Sawing

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW dimensions 4000 x 500 x 920 mm Gtsdpfx Aor I E Hcsg Tst weight 450 kg

Condition: used, Year of construction: 1992, functionality: fully functional, 1 unit Panel Saw TK UNIVER SVP 950M Operating hours: 1054h, as per pictures and inspection, self-dismantling Color: green Year of manufacture: 1992 Dimensions (L/W/H): 600x250x80 cm Gtedpox Szycefx Ag Tot Condition: used Payment method: advance bank transfer Storage location: joinery/workshop hall 1 Shipping: Collection only – no shipping available for this item!

Condition: good (used), Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, Gsdpfjwqmfuex Ag Tett -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable Gtedex Arrhopfx Ag Tet - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Gsdpfxox Twcvj Ag Tott

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Equipment and technical specifications: - Cutting length: 3400 mm - Cutting width: 1300 mm, CNC-controlled - Motor: 5.5 kW - Automatic brake - Digital display for cutting width - Digital display for tilting - Digital speed display Gtsdpfx Aox Sttneg Tst - Digital display for mitre fence - Scoring unit: electric H+S F45 - RAPIDO scoring system - Automatic guard control - Parallelogram guard device F45 - Table extension: 800 mm - CE version - Anodised version Availability: approx. mid-April 2026 Location: Hesse

Condition: excellent (used), Year of construction: 2007, Machine Data: Holzma HPP 380/43/43 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track element): 9 pcs Clamps: 7 pcs, first 3 clamps: 2-finger type Air cushion table width: 650 mm / 1 x 800 mm (4 pcs), each 2810 mm length Central blower: 1 unit, high output version POWER-CONCEPT TYPE PROFILINE HPP/L 380 Gtsdpfx Asx Sd Susg Tot – 1 ‘Power-Concept’ clamp (3-finger type) – 3 skew-lift clamps (2-finger type) – 1 skew-lift clamp (1-finger type) – 1st air cushion table, 800 mm wide – Speed package: saw carriage feed rate 1 – 150 m/min Technical Data: Saw blade protrusion: 95 mm Saw carriage feed rate: forward 1-130 m/min, reverse fixed at 130 m/min Automatic cutting height adjustment Angle alignment device, min. pressure width: 0 mm, max. pressure width: full cutting length Main saw motor: 21 kW, frequency-controlled Scoring saw motor, type VVSH vertical upstroke: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control with 17" flat display Labelling with part graphics / label program / label printer PICA 104 Grooving program

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1000031582, cutting length (max.): 3,800 mm, saw blade diameter: 350 mm, cutting width (max.): 3,800 mm, saw blade bore: 65 mm, throughput speed: 417 mm/s, TECHNICAL DETAILS Saw blade diameter min.: 200 mm Saw blade diameter max.: 350 mm Saw blade bore diameter: 65 mm Max. cutting length: 3,800 mm Max. cutting width: 3,800 mm Number of feed clamps: 6 Max. feed rate: 25 m/min MACHINE DETAILS Electrical data Main motor power: 18.0 kW Voltage: 400 V Current consumption: 36 A Power: 18.0 kW Dimensions & weight Dimensions (L x W x H): 6,050 x 1,750 x 2,400 mm Weight: 5,000 kg Transport packages: 3 pcs. Gtedjx Rbkrspfx Ag Tjt EQUIPMENT Documentation CE marking Optiplanning software – Easy version, SOPHIA services

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm Godpfx Agohfufge Tstt -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit - Spindle diameter: 30 mm - Spindle locking - With sliding table - Cutting length on sliding table: 2800 mm - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm - Table dimensions with extension: 1230 mm Gjdpfxswgdh Ss Ag Tjtt - Table dimensions with extension: 2070 mm - Saw blade guard - Dimensions (L/W/H): 2940 x 3400 x 1420 mm - Weight: 1100 kg ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate changes, the price may change)

Condition: new, Massive work table made of heavily ribbed cast iron Robust base frame constructed from welded steel Precision sliding table made of anodized aluminum Carbide guideways – for long-term precision and minimal maintenance of the sliding carriage Tilting cast iron saw unit with double segment guide Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding table Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality panel frame & telescopic stop, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two steps (from above, table insert removable) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm): 140 with 400 mm blade Max. cutting height at 45° (mm): 100 with 400 mm blade Saw blade tilting range (degrees): 90/46° Manual saw blade lifting and tilting Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scoring unit motor power (kW) 50 Hz: 1.3 Gjdpfx Ajit I Sbjg Tott Scoring unit speed (rpm): 9,200 Panel cutting capacity (mm): 3,200 x 3,200 Cutting width for parallel cuts (mm): 1,270 Extraction port diameter (mm): 120, 60

Condition: excellent (used), Striebig in very good condition 5200x2200 mm, 80 mm, from Swiss small business Gsdpfx Asx Aq H Dog Tott

Condition: excellent (used), CATALOG NUMBER 7513 Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm - Main blade adjustable up/down - Blade guard - Spindle lock - Sliding table length: 2600 mm Gedpfxsx S Ndvj Ag Tstt - Cutting width at fence: 900 mm - With side table - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Net price: 2260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: new, CATALOG NUMBER RE036 2 axes – electrically controlled lifting and tilting of the main saw blade with electronic height and angle readout, control panel integrated into the machine body – Brand new machine, in stock – Documentation: DTR + CE – Cutting width at the rip fence: 1300 mm – Main motor power: 6 kW TECHNICAL SPECIFICATIONS - Saw blade tilting range: 0–46˚ - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Main spindle diameter: 30 mm - Main blade diameter: 300–400 mm - Max scoring blade diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring unit speed: 8500 rpm Gtedsx S I Srepfx Ag Tjt - Scoring spindle diameter: 20 mm - Cutting width at rip fence (standard 1050 mm): 1300 mm - Cutting width using stops on auxiliary table: 215–3200 mm - Cutting height for 300 mm blade at 90°/45°: 90/60 mm - Cutting height for 350 mm blade at 90°/45°: 5–115 / 3.5–80 mm - Cutting height for 400 mm blade at 90°/45°: 25–140 / 15.5–95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle guide with aluminum rail – Additional support table – Additional start/stop button on sliding table – Electronic digital cutting width readout on longitudinal fence – Electronic digital cutting width readout on auxiliary table Net price: 49,900 PLN Net price: 11,880 EUR (depending on the exchange rate, here calculated at 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg Gjdpfx Asx S I Rhjg Tett ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)