Used Spindle Moulder With Sliding Table for sale (28,553)

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. Fedpfx Aezt Ai Esa Rjpk with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 2021, functionality: fully functional, Felder table router F 500 M, purchased on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: approx. 3.0 kW, for F 500 MS approx. 4.0 kW, or depending on the configuration Fpodpfxeztxt Hs Aa Rek - Working height: approx. 916 mm - Weight: approx. 300–320 kg, depending on the version - Dust extraction connection: approx. 120 mm at the router fence No warranty

Condition: used, functionality: fully functional, spindle diameter: 30 mm, – Italian manufacture – CE marking Fedpfx Aaow Ip R Hs Rspk – long worktables TECHNICAL PARAMETERS: – spindle diameter: 30 mm – spindle height: 150 mm – maximum tool diameter: 350 mm – five spindle speeds: 3000 / 4500 / 6000 / 7000 / 10,000 rpm – height adjustment – electric brake – motor power: 5.5 kW – table size: 730 x 1200 mm – two auxiliary tables: 410 x 670 mm – table height from base: 925 mm – extraction port diameter: 2 x 120 mm – machine dimensions (L/W/H): 261 / 100 / 120 cm – weight: 800 kg

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Fjdeyi A Tdopfx Aa Repk Storage location: Nattheim

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Fpedpezmukuofx Aa Rek

Condition: used, -Vorschub Holz-Her 3 Rollen Fedpfjc Sl Ddjx Aa Ropk

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Fpodpfex Dmnaox Aa Rjk Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: used, with spindle adjustment depth in the tablesecond handMake SchneiderType SK2 / 8SMachine no. 80002Motor 4.5 / 5.5 kWmotorized brake electronically6 speed levels 3000/4000/5000/6000/8000/10000 rpm.Right-left runMilling arbor diameter 30 mmTable top extension approx. 2 x 450 mmMilling fence with fine adjustmentControl panel aboveSocket for feederExtraction connection D 100/120 mmRequired space approx. 2100 mm x 1300 mm x 1800 mmTotal connected load 5.5 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without guarantee and warranty Fsdpsvwf Icofx Aa Repk

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Machine is being completely overhauled Equipment and technical data: Table size: 1100 x 880 mm Drive motor, pole-changing: 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm manual height adjustment: via handwheel manual tilt adjustment: via handwheel Height adjustment of the milling spindle: 110 mm Fjdpfxszlbrij Aa Ropk Tilt adjustment of the milling spindle: -5° to 45°; bearing-mounted on both sides Reversing switch for clockwise and counter-clockwise rotation with 3-roller feed unit Images show the machine in non-overhauled condition; the sale does not include the Aigner table extensions visible in the images Availability: by arrangement Storage location: Flörsheim

Condition: used, Year of construction: 1987, Second-hand machine Year of manufacture: 1987 Condition: fully overhauled Features and technical specifications: - Table dimensions 1100 x 760 mm - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height and swivel adjustment via handwheel - Speed settings: 3000/4500/6000/9000 rpm - Swivel range of the milling spindle – 5 to +45° - Milling stop with metal jaws - mounted on a round insert plate and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with 4-roller feed mechanism Weight approx. 900 kg Fpedpfszk Nzisx Aa Rok The images show the machine in its pre-refurbishment condition Availability: approx. 4 weeks after order placement Storage location: Flörsheim

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 Features and technical specifications: - Milling unit spindle height adjustable via handwheel 0–125 mm - Milling spindle swivel up to 45° via handwheel - Swivel angle display via digital readout Fpsdpfxjzk Nx Uj Aa Rsk - Tenon and slot table Z - anodised, table length 1000 mm - Milling stop 240 - Milling stop rails 450, aluminium, anodised - with 3-roller feed mechanism Availability: at short notice Location: 63934 Flörsheim

Condition: used, Year of construction: 1999, Second-hand machine Year of manufacture: 1999 Features and technical specifications: - with swivelling spindle: 0° – 45° - with aluminium roller table - Table dimensions: 1100 x 620 mm - Working height: 880 mm - Roller table dimensions: 900 x 200 mm - Roller table travel: 900 mm - Milling spindle diameter: 30 mm - Milling spindle stroke: 150 mm Fpodpezk N Tfofx Aa Rsk - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller feed unit - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Features and technical specifications: - Control display on the upper control panel - Control panel can be swivelled and extended - Swivelling milling spindle - Swivel range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change milling spindle system - Milling arbor 30 mm - Electromechanical spindle locking mechanism - Frame support 1,340 mm at the machine table, extendable by approx. 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz - Power socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / continuously variable speed control Fedjzk N Sbjpfx Aa Ropk - Milling stop type 203 with handwheel adjustment on both sides - Centrex Type 1624 milling protection and clamping device - ZEROMASTER reference dimension setting device - Wegoma Variomatic 4N feed unit: 4-roller feed unit Variable feed speed 2–18 m/min Clockwise and anti-clockwise rotation Suitable for both horizontal and vertical use Memo-Lock system for easy swivelling and repositioning Digital height display Height adjustment from the operator’s side Generously sized locking levers Maximum reach 1,050 mm thanks to extended tube - Dimensions: 260 x 180 x 130 cm - Weight: approx. 1,100 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 2007 Features and technical specifications: - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height adjustment via handwheel - Speeds: 3000/4500/6000/9000 rpm - Milling stop with metal jaws Mounted on a round turntable and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with a roller table attached to the left-hand side Please note! The table extension was fitted at a later date! To use the roller table, it must this must be removed again! - with 4-roller feed mechanism, built in 2007 Fjdpfxjzk N R Rj Aa Repk - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Second-hand machine Features and technical specifications: - heavy-duty cast iron construction Fpjdpfx Aaezk N R Do Rek - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900–4400–6000–7800–10,000 rpm - Height and swivel adjustment: electrically driven - Fine adjustment: via handwheel - with Panhans metal stop jaws - with Holz-Her 3-roller feed mechanism Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2000, Second-hand machine Fpedpfszk N Rdox Aa Rok Year of manufacture: 2000 The T 110 is SCM’s table router, offering an ideal combination of quality and an affordable purchase price The structure is extremely sturdy For ease of use, all controls are within easy reach on the front of the machine Precise height adjustment of the tool is ensured by a mechanical indicator Spindle tilt from -5 to +45 degrees Table size 1000 x 750 mm Spindle clamping length: 140 mm Spindle overhang from the table: 20 mm Spindle speeds 3,000–4,500–6,000–9,000–10,000 rpm Max. diameter of the tool that can be lowered beneath the table: 320 x 40 mm Profiling tool, max. 250 mm Motor 4 kW Extraction nozzle 120 mm with 3-roller feed mechanism Weight 520 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of tilt adjustment Hinged hood with aluminium guides Adjustable table top opening via table slide System for quick tool change with long tables and extendable workpiece support Table size 2500 x 780 mm Spindle adjustment – 45° to +45° Spindle diameter 30 mm Spindle stroke 230 mm Max. table opening: 300 mm 5.5 kW motor with automatic star-delta start with clockwise and anti-clockwise rotation Speeds: 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle tilt and stop position (milling stop) Extraction at top and bottom: 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Fpjdpfx Aaszk Nq Re Rok Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2023, Used machine Fjdszk Nn Ajpfx Aa Ropk Year of manufacture: 2023 Condition: as new, machine is unused Features and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Useful length of the spindle: 125 mm - Spindle mandrel diameter: 30 mm - Speed display: LED display on the front of the machine - Max. tool diameter (standard): 240 mm - Maximum tool diameter that can be lowered: 230 mm - Maximum tool diameter for profile milling: 240 mm - Maximum tool diameter for tenon milling: 320 mm - Work table length: 1,200 mm - Work table width: 530 mm - Table height: 900 mm - Slide carriage length: 1,200 mm - Slide carriage width: 360 mm - Slide carriage height: 142 mm - Extraction nozzle diameter: 2 × 120 mm - Drive motor power: 5.0 kW - Mains voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: at short notice Storage location: DE-63934 Röllbach

Condition: good (used), Year of construction: 1979, Table dimensions 1100 x 760 mm Motor output 4,7 kW Spindle diameter 30 mm reus 4 U/min Weight 850 kg Fedpfx Aaezhcg Tj Repk Year 1979

Condition: new, Table dimensions 2500x 780 mm Motor output 7,5 kW Fpodpfx Aajxpi D Is Rjk Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min

Condition: used, Year of construction: 1992, Machine cleaned, function tested, partially overhauled. Spindle runout extremely precise, maximum 1/100 mm. Pneumatic hoses, filter pressure regulator, and mist lubricator replaced. Test run carried out. Fodpfx Aaey Ay Dzo Ropk Used machine, excellent condition, premium features with plunge spindle. With this milling machine, both entry and exit milling operations can be performed. This means the milling spindle can be pneumatically controlled to plunge in and out via a table operated by adjustable limit switches. Manufacturer: Hofmann Model: TFS 1200 Year of manufacture: 1992 Machine no.: P127-92-222-723 Motor: 5.0 / 6.2 kW (reinforced) Swivelling range: -5° to +45° Motor brake Motor: 2 speeds, pole-changeable 6 speed levels: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Forward/reverse rotation Table size: 2,000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Digital displays for milling fence, diameter, and cutting depth Electric height adjustment Electric swivel adjustment Digital displays for swivel angle and spindle height Extraction connection: 2 x 120 mm diameter Required space: approx. 2,000 x 1,600 x 1,400 mm Weight: approx. 1,000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, function tested without overhaul, without warranty or guarantee

Condition: used, Year of construction: 1982, Includes a brand new star-delta switch. Used Good condition Cleaned Functionally tested Overhauled Manufacturer: Martin Type: T23 Year of manufacture: 1982 Machine no.: 82468 Motor kW, increased power: 4.7 / 5.7 Swiveling range: 0 - 45° Motorized / mechanical brake: Foot brake Motor, 2 speeds / pole-changing: yes Speed stages rpm: 3 / 4.5 / 6 / 9000 Right-left rotation: yes Table size l x w mm: 1100 x 950 Milling arbor diameter mm: 30 Milling fence with fine adjustment: yes Socket for feed mechanism: yes Dust extraction connection mm: 100 / 120 Fpjdpezbc D Hefx Aa Rok Space required approx. L x W x H mm: 1100 x 950 x 1100 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected Without warranty and guarantee.

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Fpedpfx Asvwf Ucea Rok

Condition: new, Main motor with 7.0 kW (S6) and automatic star-delta switching Reverse rotation direction with electrical interlock during switching Fixed milling fence with aluminum rulers (version with electrical safety devices) complete with extraction hood (max. tool diameter 240 mm) Interchangeable milling spindle Controls on the front side Electrically adjustable spindle height and tilt Electrical pre-wiring for power feed unit (CE version) with table extension: 2,500 x 1,200 mm (length/width of milling table, incl. extension and workpiece support) Operating hours counter Technical data: Power 7 kW Working table dimensions (extendable workpiece support) 2500 x 855 mm (1200 mm x 855 mm) Spindle diameter 30 mm Spindle tilt 0-45° Spindle clamping length 90 mm Fpjdpfxsxnqx De Aa Rjk Tool diameter under table 240 mm Spindle base protrusion from table 38 mm Spindle speeds 3500/6000/8000/10,000 rpm Extraction port diameter 120/120 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Fjdpjv A Hhzjfx Aa Ropk Weight 190 kg Total power requirement 2,8 kw