Used Table And Chop Saw for sale (25,770)

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments Ljdpfx Aefv Hphsgperp - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivel range: up to 45° Saw blade/cutting blade diameter: 200 mm Cutting depth: 47 mm Lrodpfxoc Snvfs Agpep Electrical connection: 230 V AC Weight: 14.5 kg

Condition: used, Discharge take-off table: Ledpsxuiq Eofx Agpsrp - total length 7850 mm - total width 1200 mm - four upper hold-downs - prism guide 70 mm - hydraulic feed

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: Lodpfxoxuipbe Agpjrp - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm – Pro Gline carriage guides – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut – Electric setting of cutting width on the right side – Automatic scoring unit advance Lrjdpfeymz Ubox Agpop – Extraction port diameters: 100 mm and 120 mm Transport dimensions: – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: excellent (used), Catalog number: 8057 TECHNICAL DATA - max. blade diameter: 400mm - blade arbor diameter: 30mm - max. cutting height: 120mm - spindle lock - main blade adjustable up/down and at an angle - blade guard - with side carriage - cutting length on carriage: 1000mm - cutting width with guide: 1050mm - main motor: 3kW - with extension - dimensions of the table with extension: 1050x1730mm - 3 types of rotational speeds - dimensions (L/W/H): 2700x1750x1000mm - weight: 860kg ADVANTAGES – Made in Germany Lredpsznk T Usfx Agpsp – Blade guard – Large blade: 400mm – Used saw, very good condition Net price: 7900 PLN Net price: 1881 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1995, Motor: 3.0 kW Can swivel on both sides Cutting height: 170 mm, with stand Lrjdjzd Tgiepfx Agpop Location: Nattheim

Condition: used, Year of construction: 1987, total length: 2,800 mm, total width: 1,700 mm, total height: 1,300 mm, Colour: Green Weight: 500 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 87-7-23 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 145 - Parallel stop displacement [mm]: 1100 - Roller table length [mm]: 2800 - Table width [mm]: 1150 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Manually adjustable axes: Cutting height, Tiltable Ljdpfx Agey Ttraoperp - Spindle speed: Manual - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 2800mm x 1700mm x 1300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), AGT Combination table saw and miter saw - Cutting width: 380mm - Cutting height: 85/40mm - Weight: approx. 50kg Lsdpfx Agsy Tmgkopsrp - Tilting and swiveling

Condition: used, Year of construction: 2014, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, total length: 2,800 mm, total width: 2,100 mm, total height: 1,700 mm, overall weight: 900 kg, Equipment: CE marking, saw blade guard, scorer, No. 04540 Sliding table saw Martin TC 660 Used, year of construction 2014 Sliding table length 2600 mm Max. saw blade diameter 400 mm Cutting width 1250 mm Speeds 3000 / 4000 / 5000 rpm 2-axis scoring unit with manual adjustment Manual saw blade tilting 0° - 46° Electric cutting height adjustment Crosscut table approx. 1250 x 700 mm LW Tiltable crosscut fence extendable up to 3200 mm Saw blade guard can be swung away CE-compliant Incl. operating manual as a .pdf-file Transport dimensions approx. 2800 x 2100 x 1700 mm LWH Weight approx. 900 kg Lrsdpfxozmgkao Agpsp To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Year of construction: 2026, Compact circular saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence. The cutting plane of the compact circular saw is directly on the roller table. Precision-guided aluminum crosscut fence, anodized as standard. Large table extension guided on a telescoping arm and adjustable in length. The standard table extension and table widening allow for easy work with larger workpieces. The large saw unit made of cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, making it extremely robust and durable. Smooth operation and precise cuts. Aluminum crosscut fence. Equipped with a tried-and-tested ball contact system. Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence. Extendable aluminum telescopic fence. Angle adjustable. With two professional folding fences. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Fence length: 1660 mm Cutting height max. 90° with scoring blade: 100 mm Cutting height max. 45° with scoring blade: 79 mm Lrjdpscnxamjfx Agpsp Cutting width max. to the left of the saw blade: 1270 mm Cutting width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scoring blade: 315 mm Saw blade diameter max. without scoring blade: 315 mm Scoring saw blade diameter (optional): 80 mm Main saw blade speed: 4000 min-1 Scoring saw blade speed: 7600 min-1 Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Dust extraction port diameter: 120 mm Dust extraction port diameter on the saw blade guard: 60 mm Weight: 295 kg Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Lsdpfsv Erkajx Agporp Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Lrsdpfozl S Nfsx Agpjp Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: Lrjdpfxoyvh Rve Agpjp - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2008, machine/vehicle number: 08-08-10-044, Panel saw, manufacturer: Altendorf, model: F45, machine number: 08-08-10-044, likely year of manufacture: 2008. Ljdpszn Ihvofx Agpjrp

Condition: used, Year of construction: 2010, Sliding carriage: 3000 mm CNC parallel guide, cutting width 1000 mm. Motor: 5.5 kW electric motor for height and swivel adjustment. Swivel range: 0.5 - 47°. Digital display for swivel angle and cutting height. Saw blade diameter: max. 550 mm. Cutting height: max. 200 mm. Prepared for a scoring saw. Control panel at eye level, swiveling. Front table, swiveling. Table extension 840 mm. Angle/miter fence 3200 mm. Lrjdpfx Agezccg Depop Location: Supplier.

Condition: used, Year of construction: 2002, Saw unit: swiveling 45° Carriage length: 3200 mm Max. saw blade diameter: 400 mm Saw blade bore: 30 mm Motor power: 7.5 kW Speeds: 3000/4000/5000 rpm Max. cutting width: 1300 mm, input via keyboard Control panel: at eye level, with Easy control system Height adjustment: input via keyboard Swivel adjustment: input via keyboard Swivel angle display: digital Cutting width display: digital Guide: double roller carriage, steel Stop: scale adjustment Scoring saw: manual PSV protective guard: Yes End position locking: Yes Automatic motor brake: Yes Description: On/off switch on the saw carriage Weight approx.: 1115 kg Dimensions: 3200 x 1800 x 1900 mm Lredpfxszktp Rs Agpjp Dust extraction diameter: 1 x 80, 1 x 120 mm Location: Nattheim

Condition: excellent (used), CATALOG NUMBER: 7949 Technical data: - Track width: 380 mm - Shaft width: 420 mm - Max saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max cutting height: 120 mm - Table width with clearance: 1060 mm - Table length: 2050 mm – Top section: - Pawl/anti-kickback row - Metal pressure roller - Kickback fingers - 2 metal feed rollers - Hold-down clamp - Saw shaft Lredpfozkuawsx Agpop - 3 metal pressure feed rollers – Bottom section: - Guide - Kickback fingers - Track - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 30 kW - Centralized track lubrication - Extraction outlet diameter: 250 mm - Roller tables: 2 pcs 1st table length: 3500/800 mm 2nd table length: 2550/800 mm - Roller width: 700 mm - Table height: 950 mm - Overall dimensions (LxWxH): 2950 x 2000 x 2000 mm - Weight: approx. 3000 kg Advantages: - Made in Germany - 2 roller tables - Used multirip saw - Very good condition Net price: 32,900 PLN Net price: 7,833 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, Motor: 3.0 kW Cutting height: 80 mm Swiveling function, no vice required Ljdpfx Aezkl U Sogpjrp Location: Nattheim

Condition: good (used), Year of construction: 2002, Panel saw Manufacturer: Felder Type: K700 E Year of manufacture: 2002 Sliding table length: 1,300 mm Cutting width: 850 mm Cutting height: approx. 100 mm Max. saw blade diameter: 300 mm Power: 4 kW Scoring saw: No Motor brake: Yes No sales to private individuals. Ljdpfx Aozmr Rxjgpsrp

Condition: excellent (used), CATALOG NUMBER 7918 TECHNICAL DATA - Max. saw blade diameter: 450mm - Spindle diameter: 30mm - Pneumatic top clamp - Blade guard - Blade guard also functions as a hold-down clamp - Pneumatic blade feed - Cutting height (at 250mm width): 120mm - For lower cutting heights, the cutting width is increased - Main motor power: 6kW - Extraction nozzle diameter: 120mm - Table dimensions (LxW): 650x850mm Lrodszkgzyspfx Agpsp - Table height from base: 1000mm - Roller tables: - Infeed roller table + stop: 3180mm - Outfeed roller table + stop: 2450mm - Roller width: 360mm - Operating pressure: 8 bar - Overall machine dimensions (without roller tables) LxW xH: 1300x1050x1800mm - Weight: 550kg FEATURES – 2 roller tables – Pneumatic blade stroke – Used saw, in perfect condition Net price: 14,900 PLN Net price: 3,550 EUR (based on EUR rate of 4.2) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 1990, ALTENDORF F45 tilting circular saw with scoring unit Scoring unit Ledszipw Ijpfx Agporp Double roller carriage, tilting, parallel fence Extension table, table extension, anodized aluminum, table widening, anodized aluminum, upper guard, narrow and wide ----- Technical data ----- Tilting range: 45°, carriage length: 3,200 mm, cutting width: 1,250 mm, max. saw blade diameter: 450 mm, motor power: 5.5 kW, 3 speeds dust extraction port diameter: 80 / 120 mm Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Altendorf WA8 sliding table saw Main motor: 5.5 kW, 3 cutting speeds Scoring saw: 0.75 kW, Table length: 320 cm, Tilt: 0-45 degrees, electrically adjustable Blade height adjustment: electrically adjustable Max. blade diameter: 400 mm, Ledeznw Dyspfx Agpsrp Cutting width on the right side: 1370 mm. Good condition, fully functional.

Condition: as good as new (ex-display), Roller table for EG800 multi-blade saw Length: 1.6 m Height to the top of the roller: 900 mm Lredpjzn Iyfjfx Agpjp Width: 738 mm

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg Ledpfozinzrex Agpjrp In good condition