Crosscutting saw buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

Crosscutting saw optimizing 3004

Palokka, FinlandFinland dealership location
6863 km
1997
good (used)
Programmed for lengths or cutting on color marking with light barrier, 5 reject boxes after cutting with stacker and lift. Min length 180 mm and max length 3500 mm Yrpklk Timber sizes min/max 20 mm/ 100 mm thickness and 40mm/200 MM width Feed speed 130 m/min and of cuts 80/min GOOD PRICE !! more
1
Elect./Voltage: Hh0nkhw0c HUNDEGGER SC-1 Linear Truss SawComputerized Linear Component Saw System for truss, wall components and other similar applications. -- Base machine with Saw Station for straight saw cuts 90° cuts; angle & bevel drive for saw unit. -- Can handle from 1/2" to x 1" to 7" x 18"; can also cut 2x dimensional lumber that can be stacked 3 to 4 deep at a time. -- Complete with: Loading infeed conveyor with automatic workpiece infeed 2 HP (1.5 kW); bottom side support for... more
5
Zaffaroni MLS 130 PD 2RR _ Multi Rip Saw for Panels MACHINE DATA Zaffaroni Multi Rip Saw for Panels Make: Zaffaroni Model: MLS 130 PD 2RR Serial#: ZM369 Bb7nynashf Year of Mfg.: 2007 Condition: Like new, worked 2008 Very few Hours Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in the US till now! DESCRIPTION Toothed belt transmission with double sta... more
33

Saw Kaltenbach SKL 450 NA

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2004
ready for operation (used)
Ser. No. 123223, integr. vertical drill spindle, material discharge station, L approx. 5,000 mmDEKaltkreissaege (int. Nr. 000082), #359Ser.-Nr. 123223, integr. vertikal Bohrspindel, Materialaufgabestation, L ca. 5.000 mm Krnd2d more
5
Saw blade grinding machine, tool and Cutter Grinder, grinding machine, grinding machine for circular saw blades Sharpening machine for band saw blades, circular saw blades, hacksaw blades -Sägeblattschärfmaschine with transmission of part of -To the grinding of circular saw blades up to Ø mm - automatic Zusetllung and switching off 880/750/H1150 dimensions mm Zbcundrhs Weight 200 kg more
1
Eisele KMS 90 C0wznhq Fully functional from an Ausbildungseerkstatt Saw blade diameter 275 mm Cutting capacity at 90 degrees: approx. 90 mm Cutting capacity at 45 degrees: approx. 90 mm Cutting capacity at 90 degrees: square Max 120 x 75 mm Cutting capacity at 45 degrees: square 80 x 75 mm Speed range 40 / 80 U/min Number of 2 speed drive motor 1.0 / 1.4 kW Motor speed 1.420/2,850 Rev/min Voltage 380 V / 50 Hz Machine weight approx. 150 kg more
5
work piece width:1000 mm workpiece height:420 mm bore diameter:8 - 40 mm Bafx83voao weight of the machine ca.:18 t dimensions of the machine ca.:B x L x H 6,2 x 6,5 x 2,9 m The sawdrill line consists of a drilling system from Peddinghaus - BDL 1000/9 - and a band saw from Meba - 1020 DGP. It is used but in good condition. The band saw is from the year 2005, the drill line from 2007. Technical data Peddinghaus drilling rig BDL 1000/9 The maximum working width is 1000 mm, the maximum working h... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbylhjyjvz FRIULMAC Dual Feed Double End Cut-Off Saw:For squaring the work pieces and for transportation to a Planer or Moulder with a straightening table. -- 78.7" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left hand fixed with left hand fence line. -- Hopper magazine - material capacity: Min. length 7.87" (200 mm), max. 78.7" (2,000 mm); width 1-1/8" (30 mm) to 4.33" (410 mm) and thickness 0.39" (10 ... more
9
Gpymyhtck Holzma Type HKL-11 Optimat, fully automatic High production angular sawing system MACHINE DATA: Make: Holzma Plattenaufteiltechnik GmbH Model: HKL11/43/22/16 Year of Mfg.: 2006 Serial No.: Main Machine HKL 11 0-241-15-3377 HOLZMA HAU-A 16/12 0-244-15-0684 HOLZMA HEE 38/16 0-243-15-2235 HOLZMA HEE 38/16 0-243-15-2487 HOLZMA HEE 38/16 0-243-15-3422 Condition: Used, in excellent conditions Was installed in the USA, Plant ... more
18

Saw SA 142/37

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2008
ready for operation (used)
Ser. No. 1423730428, pneum. clamping device, sawblade-dia. 500 mm, speed 2,800 rpmDESaegeautomat (int. Nr. 000151), #421Ser.-Nr. 1423730428, pneum. Spannvorrichtung, Saegeblatt-dia. 500 mm, Drehzahl 2.800 U/min Hi07npjpe more


crosscutti...
daily

New machines via email!

Stay updated!
5
Hack saw, hacksaw machine -Max cutting height 320 mm -Max cutting width 240 mm MITRE 45° Blade length 500 mm Adjustable cutting pressure Dimensions machine 1650/820/H1150 mm Baull89a Weight 900 kg more
Eisele KMS 90 Fully functional from an Ausbildungseerkstatt Saw blade diameter 275 mm Cutting capacity at 90 degrees: approx. 90 mm Cutting capacity at 45 degrees: approx. 90 mm Cutting capacity at 90 degrees: square Max 120 x 75 mm Cutting capacity at 45 degrees: square 80 x 75 mm Speed range 40 / 80 U/min C0nihtp Number of 2 speed drive motor 1.0 / 1.4 kW Motor speed 1.420/2,850 Rev/min Voltage 380 V / 50 Hz Machine weight approx. 150 kg more
4

Cold Circular Saw KALTENBACH HDM 800

More Kaltenbach Hdm 800
Mönchengladbach, GermanyGermany dealership location
6371 km
1970
used
saw blade diameter:800 mm cutting diameter:250 mm stroke: mm capacity 90 degrees: flat:500 x 170 mm Ughchsddo capacity 90 degrees: square:220 mm feed speeds:1 - 1000 mm/min total power requirement:10 kW weight of the machine ca.:3,1 t dimensions of the machine ca.:2,1 x 1,2 x 2 m more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bcnmbmypdm DIMTER MODEL 104-R OPTIMIZING CUT-OFF SAW - RIGHT HAND MODEL (Feeds Right-To-Left)Marking Station:The marking section, which is attached to the transport section, can handle boards up to 20 feet [...] System:The infeed system consists of a precision, servo-controlled pusher arm that travels along the full length of the board, measuring length, grade zones and defects. The pusher arm automatically positions it's self after measuring the board and ... more
5
work piece width:620 mm workpiece height:450 mm drill diameter:10 - 40 mm Ncv9b The Kaltenbach KBS 620 APS603 saw drill line from 1999 is overhauled at Nenok and is in good condition before delivery. The combination consists of the Kaltenbach band saw KBS 620 DG and an APS 603 drill line. The band saw is semi-automatic and equipped with diagonal cutting +/- and suitable for sawing steel profiles. The saw blade dimensions are 6175 x 41 x 1.3 mm. The cutting speed is infinitely variable in a ran... more
18

Band Saw Meba Meba Pro 260 AP

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2011
ready for operation (used)
Ser. No. 63884, 90degree machine electr. saw feed, output 1,5 kW, cut range  260 mm, and/or 300 x 260 mm, saw belt 3,700 x 27 x 0.9 mm Juzs9a more
5
Circular saw machine with magazine, metal cutting circular saws, circular saws, circular saw machine, cold circular sawing machine -hydraulischpneumatische material voltage Vvmf8 Drive 1.5/2.2 kW Cutting speed 16/32 m / min Saw blade ø 320 mm -Cutting range: - 90 ° approximately mm - 90 ° flat mm-with material magazine and separation of the material Feed motor with stop Circular saw speed 10-40 m / min Cutting pressure adjustment hydraulischpneumatisch. infinite space 10000/120/H1600 ... more
5

Band Saw - Vertical MÖSSNER-REKORD SM 320

Bünde, GermanyGermany dealership location
6460 km
1976
used
roll diameter 320 mm throat 300 mm workpiece height 200 mm table-size 500 x 500 mm throat in width 310 mm throat arm - height 230 mm band speed 12-375 m/min total power requirement 0,9/1,3 kW weight of the machine ca. 470 kg dimensions of the machine ca. 0,8 x 0,8 x 1,85 m Condition: ready for operation Electric 380 Volt Complete with Stumpf-welding device combined with shear and grinding stone Diverse saw bands From a training workshop - less used. Bjdswkz8 Machine dealer with own... more
3

Cold Circular Saw TRENNJAEGER UNI 16-10

Monheim, GermanyGermany dealership location
6405 km
used
saw blade diameter 520 mm cutting diameter 135 mm Dc2gp2kd8 profile width 400 mm turning speeds 3000 U/min. capacity 90 degrees: round 110 x 2,0 mm capacity 90 degrees: square 30 x 30 mm capacity 90 degrees: I 110 x 110 x 9 mm total power requirement 7,5 kW weight 0,5 kg range L-W-H 0,9 x 1,1 x 1,2 mm hydr. Height Adjustment more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Wd7jo9h BREVETTI Prisma Maxi Double Mitre Saw with saw blade actuation via pull handles for accuracy and cut quality. -- Well suited for a low to medium volume custom frame shop. -- Dedicated right and left 45° cuts, with (2) separate 220 Volt motors. -- Features: Max. cut width 180 mm and max. cut height 80 mm. -- BREVETTI Prisma Maxi Double Miter Saw with (2) 1.5 HP - 2,800 RPM motors. -- This model no longer manufactured. more
5

Band Saw Meba 560 DG 700

Köln, GermanyGermany dealership location
6416 km
2000
used
cutting diameter:560 mm saw band length:9300 x 54 x 1,6 mm table height:850 mm Power requirement saw band:7,5 kW total power requirement:mind. 11 kW dimensions of the machine ca.:4.40 x 27 m mitre joint cuts -/+ degrees:- 30° / + 45° cutting range max.:750 x 560 mm cutting speed:15 - 150 m/min down speed stepless:0 - 300 mm/min. weight of the machine ca.:4,8 t Weight of Material maxium:500 kg/m Iei2p0r dimensions of machine:L 3300 x B 4400 x H 2800 mm MEBA 560 DG-700 double mitre band saw h... more
24

Band Saw Singular SH-3028 FHANC

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2008
ready for operation (used)
Ser. No. SHO300030, sawblade length 3,820 mm, sawblade speed 16-85 m/min., workpiece  max. 280 mm, roller track 400-2,000 mm J8kytb more
5
Aluminium circular saw, ALU halbautomtische glass Strip saw, circular saw, compound miter saw Processing of shallow angle and solid material, pipes and special profiles saw blade Ø 400 mm blade swivel Drive 2.5 kW Speed 2800 RPM pneumatic material voltage -pneumatischer feed 08wlgx0lr -with chip extraction Dimensions 1100/900/H1160 mm Weight 238 kg more
4

Hacksaw - Automatic BEHRINGER Super A-200

Dreieich, GermanyGermany dealership location
6568 km
1982
used
cutting diameter 200 mm band length 350 mm cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm no. of strokes 52/66/81/104/132/162 Hub/min coolant voltage 380 V total power requirement 3,0 kW weight of the machine ca. 470 kg Dkdve9sp8 more
5
-hydraulic clamping bars -Cutting length 3000 mm -rear plate Bbxyh7298d more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbuzob0hp9 BARR-MULLIN TURBO WONDER Optimizing Saw;2" x 8" Cap., 24" min. length, up cut design. -- Equipped with: 7-1/2 HP - 1,740 RPM Main motor, 20" blade cap., 1" arbor, 4,660 RPM blade. -- DC Servo drive with (12) knurled steel feed rolls, variable feed speed 0 - 600 FPM, belt infeed, spring loaded press rolls, lower driven outfeed [...] Features: -- Top sensing camera for cut for value, cut for yield, cut for ratio, and cut for finger joint block... more
5
work piece width:620 mm workpiece height: 350 - 400 mm Bb0qxopmla drill diameter:10 - 40 mm number of drill axes:3 Measurement saw band:6175 x 41 x 1,3 mm cutting speed:15 - 90 m/min The Kaltenbach band saw KBS 620 DG and drill line APS 615 is a machine combination with Signomat and transport system. The drill line is in very good condition and has been upgraded by Kaltenbach for quick drilling with carbide drills. This makes it possible to use Kennametal KSEM drills on all 3 drill axes. The... more
6
saw blade diameter 350 mm cutting diameter 120 mm speeds 1700/3400 U/min dimensions of saw-blade 350 x 32 mm Max. opening of wise 180 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: square 100 mm capacity 45 degrees: flat 135 x 60 mm weight of the machine ca. 160 kg Yrnqbw dimensions of the machine ca. 8 x 0,7 x 1,23 m Condition: good CE signed Electric 380 Volt Approach rolling table 4,5 mm Roller conveyor with measuring stop 3 m saw bl... more
5
hydraulic for cutting - cold saws for cutting saw -Double - cold saws links up to 45 ° right up to 45 ° angle adjustment-hydraulic-Vorschub hydraulic Cutting area -90 ° 640 x 210 mm Hhulromzy -45 ° 410 x 210 mm Roller conveyor with stop rail 7000 mm Foundation plate more
6
Band saw Flott Maximum cutting width 780 mm Max cutting height 360 mm Overall height approx. 2,40 m Power 3 HP Speed 1.425 U/Min. Weight approx. 700 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. Bcrjywz7zi A forklift/crane for loading is available. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, ... more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant voltage 400 V total power requirement 2,2 kW weight of the machine ca. 700 kg 3gtisvayf dimensions of the machine ca. 2,60 x 1,75 x 1,70 m - Fab. No.: 0003000633 more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Wdtyjlg CTD D 45 Double Miter Saw w/RAZORGAGE 10' Programmable StopSpecifications & features: 10" Blade cap., saws fixed at 45° angle (saw heads are adjustable up to 3°), (2) 1.5 HP - 3,450 RPM TEFC 2-belt drive motors, 5/8" arbor; saw actuation by foot pedal valve. -- Equipped with: 2-1/2" Cutting height x 3-1/4" width cap., 35" high cast iron table, 2" dia. air cylinder for vertical blade travel with auto-reverse at bottom of stroke. -- Complete with: ... more
5

Bandsaw - Horizontal Kaltenbach KB 305 NA

Köln, GermanyGermany dealership location
6416 km
1997
used
cutting diameter:305 mm saw band length:5620 mm cutting width:305 x 380 mm cutting speed:stufenlos 16-90 m/min Pwm9da7z feed length:10 - 510 mm multiple feeding length:max. 4590 mm main drive:5,5 kW hydraulic motor:1,5 kW dimensions of saw-band:5620 x 34 x 1,1 mm total power requirement:7,2 kW weight of the machine ca.:3,1 t dimensions of the machine ca.:2,2 x 3,1 x 1,8 m Machine has a roller table of appr. 5 m infront of the machine and 2 m behind. Machine is a two column type. more
2

Veneer saw Scheer FM 8

Oberkail, GermanyGermany
6437 km
1980
excellent (used)
Veneer saw Fabr. Scheer Hhyfznqss Bu. 1980 Model. FM 8 With motorized dust extraction & rear table with stop Cutting length 3100 mm more
5
Saw blade grinding machine, tool and Cutter Grinder, grinding machine, grinding machine for circular saw blades -Sägeblattschärfmaschine with transmission of part of -To the grinding of circular saw blades up to Ø 200 mm - automatic Zusetllung and switching off Uzfig -2 x available Award pieces more
1

Saw-Blade Sharpening Machine HELLER B 250

Bühl, GermanyGermany dealership location
6593 km
1955
used
saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 C7le3bz total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m more
4
Maximum blade diameter: 400 mm Maximum section length through multiple Hub: 1,800 mm Ls92xmb2 Saw blade runs and cuts also still reasonable, however lack of guards and ads, therefore selling as a parts carrier Cutting capacity at 45 degrees: round 130 mm Cutting capacity at 45 degrees: 160 x 80 mm Cutting capacity at 45 degrees: rectangular 110 x 110 mm Cutting capacity at 90 degrees: round 130 mm Cutting capacity at 90 degrees: 210 x 80 mm Cutting capacity at 90 degrees... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuznyjb28 Automatic Cut-Off & Sorting Line ... Custom Designed for cutting pallet manufacturing lumber to size and sort to length in volume. -- Working Capacity:Cut length 12', cut width 6", cut height 2" (W/H cut capacity may be higher, to be verified based on application). -- Main Components:MAGGI Engineering, Automatic Lumber Feeder Magazine, ~ TIGERSTOP, Programmable Push Fence, ~ CTD, Automatic Cut-Off Saw, ~ STEFF-Maggi 2068 Feeder, ~ MAGGI Enginee... more
5
work piece width:300 mm workpiece height:50 mm bore diameter:8 - 27 mm total power requirement:25 kW Qf2v3yxv weight of the machine ca.:3 t dimensions of the machine ca.:2,3 x 2,5 x 1,4 m workpiece weight:max. 3 t Peddinghaus CNC controlled beam saw drill line DSC300 D with disc saw for 90° cut, saw blade size 630 mm, incl. signomat, roller feed measuring system, 3 drill spindles for HHS inner coolant drills Ø =8-27 mm, incl. infeed and outfeed roller conveyor. This small saw drill line is esp... more
7
Circular sawing machines Bcq2zct2sk Fabr. Kölle 2600mm be manually swivelled hemline. more
5
Wood band saws, band saws, fire wood saw Drive 3.0 kW Engine speed 2800 RPM Table size 650 x 680 mm Roll diameter. 600 mm / max height 380 mm - max cutting width with stop 500 mm dimensions 980/1100/H2300 mm Weight 350 kg 3pkaw8h2q more
5

Band Saw - Vertical KNUTH VB360

St. Ingbert, GermanyGermany dealership location
6503 km
2009
used
roll diameter: mm throat:355 mm workpiece height:230 mm cutting speed:20-90 m/min Table size:500 x 400 mm table adjustment:15 ° table height:960 mm power main drive:0,75 kW band length:2870 mm Band width:3 - 16 mm weight of the machine ca.:250 kg dimensions of the machine ca.:360 x 690 x 1735 mm Cklq2maq more
5
Maximum blade diameter: 350 mm Bcblswnzfl Length stop and roller conveyor on request more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bbuzll9u2w PAUL 11-MKL Optimizing Cut-Off Saw -- 7" x 1-3/4" Max. cross section cap., 3/8" min. (1/8" with special sensor) x 3-17/32" max. material height, approx. 17-3/4" min. infeed timber length, approx. 16' max. infeed timber length; 5 KW (7.4 HP) saw motor, 19" saw blade dia. running at 4,350 RPM. Equipped with: -- 32' X 3" infeed belt conveyor feeding from right-to-left 550 FPM, with photocell measuring station, special guiding for thin material. -... more
1
saw blade diameter 300 mm cutting diameter 90 mm stroke 100 mm cutting range max. 170 x 70 mm mitter cutting 90 - 30 ° turning speed range 10 / 20 / 40 / 80 U/min voltage 380 V M8z92 total power requirement 2,0 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 1,00 x 1,70 m - [...]: 095-7412 - automatic feed (pneumatic) stepless adjustable - miter - coolant equipment more
3
saw blade diameter 250 mm cutting diameter 85 mm cutting speed 1500 m/min total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 0,5 x 0,7 x 1,4 m Condition: ready for operation Bxrqsww3 Electric 380 Volt Manual miter circular saw with saw table with angle scale 45 ° left to 45 ° right with pneumatic clamping. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
5
Stop for cross-cut saw, saw... Recording Bosch profile Length unit of measure 2000 mm Price complete -Dimensions 2215/100/H1000 mm Weight 10 kg Cn3ykt03 more
6
Saw mill ARI System 35 complete Circular saw mill Used, functional The system 35 is a high-performance-plant, for Flexibility in various wood types and at the same time top cutting accuracy. 87kh3pclo The plant includes: - infeed and conveying mechanization to the initial cut circular saw - initial cut circular saw ARI KS 12 - resaw machine ARI DS 8 - resaw machine ARI DS 8 – 2 - Mechanization for further transport - cut-off saw ARI KL 10 left side - tri... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. C2s22rl0 DIMTER S 90 Optimizing Cut off Saw: Working dimensions: 4" Thick x 9" wide max. incoming board cap.; min. cap. 3/4" x 1" wide. Highly accurate Push Feed Saw, right-hand version (material feeds from right-to-left), 16" min. to 14-3/4' max. infeed board lengths, 3" min. to 14-3/4' max. outfeed [...] with: -- 10 HP Arbor motor driving 20-1/2" dia. blade with 30 mm bore at 2,900 RPM. -- Infeed system with: Precision, Servo controlled pusher bar moto... more


crosscutti...
daily

New machines via email!

Stay updated!

to

to

Edit search
CROSSCUTTING SAW
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close