2" x 6" Cap., 24" min. length, optimizes up to a 96" long board, up-cut design. -- Equipped with: 5 HP - 1,740 RPM Main motor, 18" blade cap., 1" arbor, 4,660 RPM blade. AC Servo drive, variable feed speed 0 - 400 FPM, belt infeed, spring loaded press rolls, lower driven outfeed rolls. -- Optimization features: Top sensing camera for defect or quality recognition, also tallies total lineal footage in inches or metric, edge sensing camera allows for multiple cutbi... more
with swiveling and tilting saw blade
400 Volt, 2.2 kW motor 350 mm blade diameter
complete with base frame with roller left
with stop 2 m length
with roller right
with stroke 2,5 m length
Crosscut and miter saw for aluminum EISELE type LMS I.
Type No.: 211, Masch. No. 1304, built in 1987
Cutting area 100 x 90 mm
Saw blade diameter up to 275 mm
MITRE cut +/-45°
Blade rotation speed 4000 RPM.
Motor power 1.7 kW
Power supply 380 v, 50 Hz.
Table size before the stop bracket 440 x 210 mm
-Hose connector for chip extraction Ø 80 mm
-Machine with a bad blade Ø 240 mm equipped
Dimensions L x W x H 800 x 500 x 880 mm
Weight 80 kg
Crosscut saw to the halving of round timber for fence pickets, etc.
With automatic crosscut saw.
V - guide of the woods with a feed and pull-out unit.
Compound miter saw with adjustable stops.
Saw motor 7.5 KW saw motor 3 KW.
multi functional saw / crosscut saw SCHNEIDER Typ 2406 Uni Top
year of constr. 2001, very good condition, ex location of the pre-owner
usable for chop-cutting, mitre cut, compound cutting and length cutting.
cutting height 280 mm
cutting height is stepless adjustable, 0 to 280 mm via fast control system
rotary plate 180 ° pivoted
saw blade inclinable 90° - 30° (0° - 60 °)
power 11,5 kW
saw blade diameter 650 mm
video on request.
we sell the machin... more
used automatic drill PADE
with crosscut saw tilt of the aggregates - 10° up to + 45 °
Performance of the saw motor 2,2 kW
Saw blade diameter 400 mm
The drill motor 2,2 kW
Drill head swivel adjustment through 360 °
min and Max spindle distances from middle spindle 17-100 mm
Max drilling depth (can be adjusted) 70 mm
Rotary speed of the saw blade and the drill
approximately 3000 rpm.
Net weight 500 kg
Operating dimensions 1200 x 1000 x 1300 mm
Panhans 680/20 panel rip and crosscut saw
with swiveling saw unit up to 47 °, height, swivel adjustment and width stop electrically driven, positioning via 3-axis control. Main saw motor 5.5 kW, speeds 3/4/5/6000 rpm. Speed indicator, cutting width 1250mm. Circular saw protection device above table with narrow and wide protective hood incl. Exhaust pipe 80 mm, swiveling to both sides. Double roller trolley cutting length 3450 mm, cross slide with telescopic length stop up to 35... more
Upcut crosscut saw Stromab TR-350
Pneumatic blade feed.
Two-handed safety starting system.
CE electrical equipment.
Working area safety grill.
Variable blade feed speed.
TCT saw blade 350 mm.
Working table of 2 mt. left from the blade.
Working table of 1 mt. right from the blade.
Digital read out on left fence more
Double lab crosscut saw TORWEGGE, 3 units, working width: 2,000 mm, length: 2,000 mm, cutting height: Max 120 mm, cutting width third unit: approx. 1.000 mm, engines: x 2.2 kW, blade diameter: Max 400 mm.
Used crosscut and miter saw makes Graule type KS Ma.Nummer 1995-2-4
Built in 1995
Speed 2.760 RPM.
Power 2,2 kW length 90° 115 mm for miter 45° 80 mm cutting height approx. 50 mm weight approx. 50 kg location: 54634 Bitburg's stock
Programmed for lengths or cutting on color marking with light barrier, 5 reject boxes after cutting with stacker and lift.
Min length 180 mm and max length 3500 mm
Timber sizes min/max 20 mm/ 100 mm thickness and 40mm/200 MM width
Feed speed 130 m/min and of cuts 80/min
GOOD PRICE !! more
1 yoke for ripping
2nd and 3rd saw unit for double lab lengths
with auto-way pan for non-contact Zurueckfahren the
Cutting length between the blades about 2,5 mtr.
Footprint approx. 2.8 mtr. deep, approx. 3 mtr. long
from operational task joinery
Very stable under counter crosscut saw in welded steel construction
Saw blade 600 mm, 4.4 kW PERSKE motor 2860 1 / min
Dimensions H 1000 x 700 x 600 mm,
Extraction nozzle 1 x 125 mm, 1 x 100 mm more
. Crosscut and miter Fabr ELU TGS 172 type Masch 2201 Year 1983 Specifications:. Blade Diameter 250 mm Blade speed 2600 rpm. Sectional area of 90 0 x 70 mm 45 0 x 38 mm Power supply 220 V / 50 Hz power requirement 1,1 kW Dimensions 700 x 650 x 850 mm Weight about 48 kg - execution rotatable as miter saw and table saw - inclinable and rotatable - Length Stop 3 , 0 m - Feet for machine and stop - table fence - suction hose used, in good condition
Right / left rotation
4 speed 3000/5000/6000/10000 R/min
Crosscut saw 1.5 kW
Carriage with clamp
Festo window stop (not complete)
Cable with plug
Dust nozzle 120 mm
Wrench 50 mm
Shaper fence with wooden jaws and mounting screws, both sides separately adjustable
Double lab crosscut saw rapid DGL
-for aluminium and plastic profile rods 2 saw blades swivel 45°
Cutting length 6000 mm-2 Motors 3 kW 400V 50 HZ
-kleinste cutting length approx. 220 mm workpiece max 150x130mm
Saw blade diameter max 420 mm
pneumatic pressure cylinder per 1 piece from the front
-per 1 pneumatic pressure cylinder by top working length adjustable spindle motor
Work length indicator digital
Weight approx. 1.200 kg
pneumatic workpiece clamping
L x W x H: CA. 7300 x 1300 x... more
Crosscut and MITRE saw with train function Fabr. METABO type KGS 216 M
Saw blade diameter 216 mm
Blade bore 30 mm
Maximum cutting width 90 ° / 45 ° approx. 305 mm / 205 mm
Max depth of cut 90 ° / 45 ° approx. 65 mm / 36 mm
Max diameter of the workpiece straight cut 90 ° / 90 ° approx. 305 x 65 mm
Double bevel 45 ° / 45 ° approx. 205 mm x 36 mm
Blade no-load speed 5000 RPM.
Speed at nominal load 3.756 / min
Power 1,5 kW
Power supply 22... more
Multiple cutting saw
Was installed in 2007 after overhauling.
Year of manufacture - about 1985-1989
Infeed rate - up to 30 m / min
Is made of:
- cross conveyor with buffer
- Separating cross conveyor
- Single cross-feed conveyor with directional roller train
- Multiple crosscut saw with 7 adjustable saws, motors - 5,5 kW
- Ejector with guideway
- control panel and electronic cabinets
Incl. substructure. more
Crosscut and MITRE saw with upper table saw
Engine 1.6 kW / 220 V
Cutting height 85 mm
Cutting length 380 mm
Saw blade 300 mm
Blade bore 40 mm
Swivel up to 45 °
Tilt up to 45 °
Saw table with 2 wheels
Double lab crosscut saw rapid DGL
• for aluminium and plastic profile rods • 2 saw blades swivel 45°
• Cutting length 6000 mm • 2 Motors 3 kW 400V 50 HZ
• smallest cutting length approx. 220 mm • workpiece Max 150x130mm
• Saw blade diameter of Max 420 mm
• pneumatic pressure cylinder per 1 piece from the front
• 1 pneumatic pressure cylinder from above • working length adjustable spindle motor
• Working length indicator digital
• Weight approx. 1.200 kg
• pneumatic workpiece clamping
Zaffaroni MLS 130 PD 2RR _ Multi Rip Saw for Panels
Zaffaroni Multi Rip Saw for Panels
Model: MLS 130 PD 2RR
Year of Mfg.: 2007
Condition: Like new, worked 2008 Very few Hours
Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in the US till now!
Toothed belt transmission with double start motor 45 ... more
Alongside our home grown brand new British manufactured Vertical Panel Saws, Sagetech Machinery are also now offering APPROVED USED MACHINES! The used vertical panel saw machines that have been traded in by our own clients who are upgrading their previous Sagetech models, giving us the opportunity to asses the value of their previous machines, make any improvements and have our own team of engineers vet them to ensure that they still have plenty of life left in them. We only sell on approved use... more
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.