Used Horizontal bending machines - bending force 26t to 39t for sale (14)

Condition: used, Max. bending capacity: 320 kN (32t) Cylinder stroke: 200 mm Pressure adjustable from 0-320 kN Tool height: 240 mm Bending capacity: 140 x 20 mm for V125 Dpshgb Roller conveyor hydraulically liftable and lowerable Weight: approx. 1,300 kg

Condition: new, Load capacity: 10,000 kg, Rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Cuxdekiygg Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation.

Year of construction: 2023, Operating hours: 0 h, Condition: new, Machine/vehicle number: 12464, KARMET SERVALO 1530-40TN ELECTRICAL PRESS BRAKE. With 2 Lenze Servo Motors. ESA Touch Screen 19’’ 2D Controller. Mitsubishi Drivers and Motors for Back Gauge. X - R type back gauge. European type V die. Bjjjjn0F3P European type Punch. Electrical cabinet cooling system. Front Support Arms - linear guided 2 nos. Front and Back protection according to the CE (Akas, Sick) Quick release top tool holders. Standard sectioned full length tooling. (Punches: 85° R=0,8 H=120+30 & 4V DIES V16-22-35-50(85°)/H=60) 2 years warranty. Training and Installation is included.

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Cp7Hhodtca Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: good (used), Year of construction: 1998, Used bending machine from Loar Dpgvfn Type Bendhor 30 Capacity 30 tons Including various bending tools

Condition: new, Year of construction: 2023, Horizontal bending machine T 300 Multi - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 30 to. - length of stroke 250 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table Big9Cq8Oxp - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x20 mm round tube 3/8" - 2"

Condition: new, Year of construction: 2024, Sheet width 1550 mm Sheet thickness 4.5 mm Bend 4.0 mm Roll length 1550 mm Smallest diameter 190 mm Roller diameter - top 130 mm Weight 1265 kg Sflg9T7Ucr Dimensions 2670x1110x1050 mm Equipment: - Central rollers driven by electric motor, circulating reduction gear and gear drive gear drive - Top roller can be swung out to the side - Main motor with braking device - Conical bending device - Mobile control panel and foot pedal - CE mark/declaration of conformity Special equipment: - Induction-hardened rollers - Motorized rear roller adjustment - Digital display for rear roller

Condition: new, Year of construction: 2022, Omach buigers Bp10 Bhjcp83Pnx Bp20 Bp30 Bp40 Bp50 Bp80 Bp100 Uit voorraad leverbaar

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec tank capacity 80 l Pressure power 320 bar total power requirement 5,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m Bu0Orooqlf ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Year of construction: 2022, Condition: new, pressure 28 t piston stroke 180 mm diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm Bixj280Xnnn weight of the machine ca. 800 kg dimensions ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

Condition: new, Horizontal bending machine Fastech FP 30 Description - Pressure: 30t - Stroke: 285mm - Max. tool height: 250mm - Flat bar over high edge: 200 x 18mm - Working speed: 10,0mm/sec - Returning speed: 10,0mm/sec - working height: 930mm - table: 660 x 1250mm - total power requirement: 3,0kW - Motor: 400 Volt 50Hz - weight: 1050kg - dimension L-W-H: 1250 x 650 x 1250mm - Oil capacity: 40,0l Equipment: - Hydraulic horizontal bending machine - Solid working surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x set of tools - Double foot switch Coqk939

Condition: excellent (used), Year of construction: 2002, Operating hours: 4,213 h, Functionality: fully functional, Machine/vehicle number: 343, Technical data Product: Profilbiegetechnik AG/Indumasch Type: PBT 25 Control: PC200 Pressure capacity: 27 to Shaft diameter: 105 mm max. profile height: 300 mm max. torque: 300 - Speed: 12-24 min. Tool holder: Ø 105 stroke: 265 mm Drive power: 6.5 kW all 3 shafts driven Dimensions: approx. 1680 x 1250 x 1390 mm Weight: approx. 1.1 tons Bg3Diacsam equipment - various roller sets possible - infinitely adjustable front roller distance 200 - 1000 mm - 3 roller drive All information without guarantee. The machine is in very good condition. A demonstration under under power is possible at any time in our hall.

Year of construction: 2017, Operating hours: 60 h, Condition: as good as new (ex-display), Functionality: fully functional, The machine was made in January 2017. This has been used very little and is literally like new. TECHNICAL DETAILS exemplary values Material: Steel S355JR (tensile strength 500 Mpa / yield strength 360 Mpa) Sheet width / sheet thickness / inner cylinder diameter: 1200 / 900 / 35 mm 2100 / 900 / 24 mm 3000 / 900 / 21 mm 1200 / 500 / 29 mm 3000 / 2250 / 26 mm Material: steel (tensile strength 400 Mpa / yield strength 260 Mpa) Cbq9Jlrw0E Sheet width / sheet thickness / inner cylinder diameter: 1200 / 900 / 40 mm 2100 / 900 / 31 mm 3000 / 900 / 36 mm 1200 / 500 / 32 mm 3000 / 2250 / 36 mm

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. Su0Fco • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.