Used Bendicrop 50 for sale (34,894)

Condition: as good as new (ex-display), Year of construction: 2026, Strokes per minute with 15 mm stroke 34 /min. Prodpfx Aezzkw Hedxjc Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: new, Year of construction: 2026, neu 2026 090222 prompt, Zwischenverkauf v Spanien 15800 € 303.36 € 1 1 50 to 177 mm 5 1 31 x 12 mm 34 1/min 350 x 15 mm 80 x 8 mm 35 / 30 mm Psdjwirahopfx Adxjrc 10 mm 100 x 10 mm 3 kW 1300 mm 1100 mm 1850 mm 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: as good as new (ex-display), Year of construction: 2026, Incl. control for entering the bending angle. Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Pjdpfxey T N T Hs Adxsrc Net weight 950 kg Gross weight 1150 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, In excellent condition, fully functional. Prodj Afi Ebjpfx Adxjc

Condition: new, flat steel 350 x 15 mm round bar steel 35 mm square edge steel 30 mm L-beam 80x80x8 mm hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm blade length 356 mm engine output 3.0 kW Stroke rate 34 Punching capacity max. 500 kN weight 950 kg dimensions 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment Pjdpfoyv Nafex Adxsrc - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2014 Prods Aggumspfx Adxsc • Machine no.: 7230-0232 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm • Control system: NC5 / CDIAS • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm • Control system: NC5 / CDIAS • PLC operating hours: approx. 61,679 h Predo Aggpaepfx Adxjc • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million • incl. Geiger MiniServo 1.5 parts removal device In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.

Condition: excellent (used), Year of construction: 2006, operating hours: 4,895 h, functionality: fully functional, machine/vehicle number: 11415553974, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total length: 3,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, DECKEL MAHO DMU 50 – 5-axis CNC machining center Technical data: Manufacturer: DECKEL MAHO / DMG Model: DMU 50 Year of manufacture: 2006 Serial number: 11415553974 Control system: HEIDENHAIN iTNC 530 Axes: 5 (X, Y, Z, B, C) Travel range X: 500 mm Travel range Y: 450 mm Travel range Z: 400 mm Spindle speed: up to 8,000 rpm (manufacturer's standard, to be confirmed) Tool holder: HSK 63 NC rotary table: B and C axes Table size: 630 × 500 mm (manufacturer's specification) Maximum table load: 200 kg (manufacturer's specification) Operating hours: approx. 25,632 h Second hour counter: approx. 4,895 h Connected power: 17 kVA Prjdpfx Ads Afwhqoxec Operating voltage: 400 V / 50 Hz Condition: Used, well-maintained appearance. Important: The machine is sold exclusively without any accessories. No tools, tool holders, or machine vises are included. Inspection possible by appointment.

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 30, DMG MORI DMU 50, 3rd Generation 5-Axis Universal Machining Center Manufacturer: DMG MORI Model: DMU 50, 3rd Generation Year of Manufacture: 2018 Control System: Siemens 840D sl Operate with CELOS Operating Panel: 21.5-inch ERGOline Multi-Touch Technical Data Machining: 5-axis simultaneous machining NC rotary table Travel distances: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Swivel/Rotary Axes: B-axis: -35° to +110° C-axis: 360° Worktable: Clamping area: Ø 630 × 500 mm Maximum table load: 300 kg Main Spindle: Pjdpfx Ao Agnykjdxsrc speedMASTER motor spindle Spindle speed: 20–15,000 rpm Tool interface: SK40 Spindle power: 21 kW (40% duty cycle) Continuous power: 16 kW (100% duty cycle) Tool Changer: Tool magazine: 30 positions Tool interface: SK40 Feed Rate: Rapid traverse X/Y/Z: 42 m/min Special Equipment Internal coolant supply (IKZ) with 40 bar Coolant system with 600 liter tank Paper band filter system including cabin roof Chip conveyor with scraper chain Double-stage filter, 25 µm, manually switchable Blow-off air through spindle center, selectable via M-function Renishaw PP60 optical infrared workpiece measuring probe (OMP60) Heidenhain TT160 tool measurement Tool length and diameter measurement Tool breakage detection 3D quickSET for checking and correcting machine kinematics ATC – Application Tuning Cycle Electronic handwheel Flushing gun for chip removal Total spindle hours: approx. 18,600 New spindle replaced in 2021 at approx. 5,800 hours

Condition: repair required (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, Deckel Maho DMU 50 T – CNC universal milling machine (year of manufacture 1996) For sale is a CNC universal milling machine, Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, as well as for training workshops. Psdpfxoz D Ab Te Adxsrc Key features: Control system: MillPlus (Deckel Maho) Travel distances: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling round table for flexible 5-axis machining Equipment: Full enclosure with sliding doors and ergonomic control panel The machine has a fault in the X-axis. When moving, it triggers the emergency stop. Since the machine has not been used since 2018, repairing it is not worthwhile for us. Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: The dismantling, removal from the building, loading, and transport must be fully organized and carried out by the buyer (at their own cost and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on site by appointment.

Condition: good (used), Year of construction: 2006, operating hours: 14,500 h, functionality: fully functional, FOR SALE MACHINING CENTER DMG DECKEL MAHO DMU 50 (5-Axis) Key feature: Only 14,690 actual spindle hours (PGM operation) for a 2006 machine. Mechanics are in very good condition. Main specifications: • Control: HEIDENHAIN iTNC 530 (with separate 3D screen) • Machining travels: X = 500 mm | Y = 450 mm | Z = 400 mm • Tilting rotary table: Ø 630 x 500 mm (B-axis: -5°/+110° | C-axis: 360°) • Max. table load: 200 kg • Tool magazine: 16 positions • Power supply: 400 V / Three-phase (Low consumption: 17 kVA) Included equipment: • Industrial precision vise (already installed and adjusted) • Separate electronic handwheel Prsdpe Af Ap Hjfx Adxsc • Coolant system with adjustable nozzles Conditions: • Used machine, available for inspection in working order. • Removal and transport are the responsibility of the buyer. • Professional sale with invoice (VAT recoverable).

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust shredding mill. Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 5 rows of stator knives Cast iron rotor, inlet approx. 1000x300 mm, Screens with 3-2.5-1 mm mesh A control panel is not available and must be built by the buyer. Pedezl E Stopfx Adxjrc The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be picked up at a port or at the production facility in the Netherlands, EXW. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: excellent (used), Year of construction: 1997, operating hours: 48,889 h, functionality: fully functional, center width: 1,000 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 280 mm Distance between centers: 1000 mm Swinging diameter: 500 mm Diameter of rotation over bed: 570 mm Diameter of rotation over support: 340 mm Spindle speed max.: 2500 RPM Psdpfxo Afxxbe Adxjrc MACHINE DETAILS Operating hours: 48,889 h EQUIPMENT Chuck

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly, considering its age. The start-up was documented in a video; the video can be sent to serious potential buyers upon request. The existing control cabinet of the extraction system, including the fan control, is also included in the scope of delivery. The control cabinet is complete. Due to the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 HP Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 min-1 Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse: 35 A Control voltage: 230 V Wiring diagram No.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by appointment. Video of the test run available upon request. Pedpfez Ikxzsx Adxerc Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are carried out entirely by the buyer at his own expense and responsibility. Terms of sale Sale from location. Sale in the existing used condition, as inspected. No guarantee or warranty, as far as legally permissible. Technical data provided to the best of our knowledge; errors and prior sale reserved. Inspection on site possible and recommended by appointment. Selling price: 1,000.00 EUR Price net, any statutory taxes and duties apply. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2017, Equipment: chip conveyor, Universal Machining Center Manufacturer: DMG MORI Model: CMX 50 U Year of manufacture: 2017 Control system: DMG MORI SLIMline Technical details: Control system: DMG MORI SLIMline X-travel: 500 mm Y-travel: 450 mm Z-travel: 400 mm B-axis: -5 / +110° C-axis: 360° Table dimensions: 630 x 500 mm Prjdpfs Agpdnsx Adxsc Rapid traverse: 30 m/min Spindle speed range: 20 – 12,000 rpm Drive power (40/100%): 13/9 kW Tool holder: SK 40 Number of tool stations: 30 positions Operating hours: approx. 11,605 h Spindle hours: approx. 4,061 h Technical features & accessories: - Chip conveyor - Internal Coolant Supply (ICS) - Coolant spray gun - Electronic handwheel - Direct measuring system (X, Y, Z axes) - Renishaw probe kit - Oil and emulsion mist separator Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: TNC430, overall weight: 6,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Rapid traverse rate X/Y/Z: 50 m/min Tool holder: SK 40 Prodpfxs Agm Tbs Adxjc Table: max. load capacity approx. 200 kg

Condition: used, Year of construction: 2000, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Fanuc 16i-M, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Distance from spindle nose to table: 100–850 mm Rapid traverse X/Y/Z: 15 m/min Spindle speed: 4,000 rpm Spindle power: 26 kW Spindle mounting: ISO 50 / DIN Number of pallets: 2 Table size: 650 × 1,400 mm Table load: max. 1,500 kg Pjdpfx Ado Agfr Eoxsrc Magazine type: Chain magazine Tool positions: 41 Tool diameter: max. 120 mm Tool diameter with free adjacent positions: max. 200 mm Tool length: max. 400 mm Tool weight: max. 20 kg MACHINE DETAILS High-pressure coolant pressure: 30 bar CNC control: Fanuc 16i-M Dimensions & Weight Machine weight: 16,750 kg Overall dimensions: 7,135 × 5,300 × 3,426 mm EQUIPMENT Gearbox Chip conveyor

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Amada Type: HFP 20 50 Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled Podpfs Aazxcox Adxsrc WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg. Pedpfx Adoz An S Roxorc

Condition: used, Year of construction: 2005, Used 2-meter CNC press brake from Amada Type: HFP 20 50 Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled Pedpfx Aj Aaztmodxerc WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: used, Year of construction: 1998, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. You can find this and many other items on our platform. Prodpfo Agkd Esx Adxjc

Condition: used, Year of construction: 2013, operating hours: 33,559 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Type: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Number of tool stations: 3 x 12 Machine weight: approx. 9.8 t Spindle hours: approx. 48,437 h Operating hours: approx. 33,559 h Condition: used Available from December 2026 Technical features & accessories: Prsdpfj Advfrex Adxjc - 2 cross slides - 3 turrets with 12 stations each (all driven) - Main and counter-spindle - 2 C-axes - Y-axis on slides 1 and 2 - Chip conveyor - Workpiece unloading system - Differential pressure clamping system for counter-spindle - Z-Y axis for slide 5 - Emulsion cooling system - Conveyor belt for finished workpieces (external to the machine) - Electrical and software interface for oil mist extraction system - B-axis Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used press brake by Darley Prjdpfx Aexq Dfvodxoc Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools

Condition: used, Year of construction: 2007, operating hours: 2,140 h, Equipment: all wheel drive, JCB 524-50 telescopic handler, manufactured in 2007! Ex-military! ---- * Manufacturer: JCB * Type: 524-50 * Year of manufacture: 2007 * Displayed operating hours: approx. 2,140 (the operating hour counter was once replaced at approx. 1,400 hours!) * Ex-military! * With pallet forks * Includes 1 spare wheel and 1 box (see photos) * Load capacity: approx. 2,400 kg * Lifting height: approx. 5.3 meters * High-speed gear currently not functioning * Video available upon request * First owner * Weight: 5,500 kg * Price: 22,900 Euros, net + 19% VAT. Pedpfe Af D E Nox Adxerc ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee. Errors and prior sale are subject to change.

Condition: used, Year of construction: 2007, machine/vehicle number: 1799-260027, Farman 50N – Universal Drill Bit Grinder The Farman 50N Universal Drill Grinder is a robust universal drill bit grinder manufactured by the Taiwanese company Farman in Taichung. Machines from this manufacturer were previously also distributed through the German suppliers Fröhlich, Dörken, and Nenok. Prjdpfo Agb Szox Adxjc The machine is designed for the precise and cost-effective regrinding of twist drills and HSS fluted drills. Thanks to its sturdy construction and manual operation, it is particularly well-suited for tool shops as well as for businesses in the steel construction, metal fabrication, and mechanical engineering industries. With the Farman 50N, used drilling tools with a diameter of up to 50 mm and the standard steel construction grind can be resharpened and reused. This extends tool life and reduces ongoing tool costs.