Used Geka Bendicrop 60 Sd for sale (50)

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 24800 € 476.16 € 60 to 500 mm 5 2 40x11 mm 32 1/min 350x10 mm 120x10 mm 45/40 mm 100x10 mm 150x10 mm 5.5 kW 2100 mm 1400 mm 2060 mm 1750 kg Godpfswiq Evjx Abrstu 5 workstations foot pedal trigger hydr. drive flat steel shears incl. Device for reducing the deformation angle iron scissors with round and square bar opening triangle claw punching and bending device for flat iron table at the flat steel and notching station user manual in GERMAN and ENGLISH

Year of construction: 2018, condition: new, TECHNICAL CHARACTERISTICS • Punching capacity: 600KN / 60Tn • Punching: Ø40x11mm • Strokes per minute (15mm travel): 32 • Throat deep: 500mm • L angle at 90⁰: 120x120x10mm • Flat bars: 350x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 100x42x10mm • Bending station: 150x10mm • Motor: 5.5KW • Net weight: 2012Kg Gtsdpfsdx Rd Sox Abreu

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 22400 € 430.08 € 1 60 to 250 mm 5 40 x 11 mm 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations Godpowirnxsfx Abrstu flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 36000 € 687.6 € 85 to 500 mm 5 40/15 bzw. 24x24 mm 450x15 / 450x18 mm 475 mm 130x130x13 mm 45/40 mm 12 mm 200x12 mm 9.2 kW Gsdowirk Topfx Abretu 2300 mm 1200 mm 2100 mm 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting hydraulic downhold for flat- and angle station triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 49600 € 947.36 € 130 to 600 mm 5 2 50x18 mm 80 mm 600x18 (max. 600x20 mit D mm 120x120x11 (max. 150x150x mm 45/40 mm Gtedpfx Aewiq Uqobrou 130x12 mm 250x12 mm 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: used, functionality: fully functional, Year of construction: 2004, Used Geka profile steel shear Type: HYD 110 SD Capacity: 100 tons Godpfxjyfmt Ts Abrstu 3-way punching head Punching table is equipped with NC-controlled stop table 2 x 2 meter roller conveyors Year of manufacture: 2004

Condition: ready for operation (used), A hydraulic multi-purpose punching machine Geka is available. Punching force: 70t, angle shearing capacity: 150mm/150mm/13mm, flat bar shearing capacity: 450mm/15mm, round bar shearing capacity: 45mm, square bar shearing capacity: 45mm, punching station capacity hole diameter/material thickness: 28mm/20mm, beam and profile steel shearing capacity I-beam/U-beam: 120mm/120mm, bending station capacity: 250mm/15mm, notching station capacity: 250mm/250mm/6mm. Machine dimensions X/Y/Z: approx. 2000mm/1200mm/2000mm, weight: approx. 2000kg. An on-site inspection is possible. Gedjyb Sc Ejpfx Abrstu

Condition: used, functionality: fully functional, Year of construction: 2001, Brand: GEKA Model: 55 SD Year: 2001 Serial No.: 15330 The GEKA Hydracrop 55 SD is a hydraulic ironworker with two cylinders, allowing two operators to work simultaneously at different stations. The SD designation indicates this is the deep throat version (500mm), ideal for processing large-scale sheet metal. This machine features 5 independent workstations: - Punching: For round holes, square holes, and special shapes. - L-profile (Angle) cutting: 90° and 45° cuts without deformation. - Flat bar cutting: Shearing of flat steel bars. - Bar cutting: For solid round and square bars. - Notching: Rectangular notches (optionally triangular). Punching force: 55Tn Gtedpfx Asx Rw Hpobrou Motor power: 5KW Punch stroke: 60mm Weight: 1,750kg Cutting and Punching Capabilities: - 40mm dia. x 10mm thickness / 20mm dia. x 20mm thickness - Flat bar cutting: 300x15mm / 200x20mm - Angle cutting at 90 degrees: 120x120x10mm - Solid bar cutting: 40mm round / 40x40mm square - Rectangular notching: Thickness 10mm / width 90 x depth 42mm Includes: - Electric backgauge - All sets of used punches and dies shown in the photographs - Includes accessories for mounting punches and dies No. 6 (up to 28mm) and No. 8 (up to 40mm) from GEKA

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Gtjdpsmig D Defx Abrsu

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Gtodjwgkq Tepfx Abrsu Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 24200 € 464.64 € 80 to 750 mm 40x14 mm 40 1/min 9 kW Gtedpfjwirf Rex Abreu 1700 mm 1300 mm 2050 mm 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 19600 € 376.32 € 55 to 500 mm 5 40/10 bzw. 20/20 mm 20 mm 37 1/min 300x15 / 200x20 mm 10x42x90 mm 5 kW 2100 mm 1160 mm 2090 mm 1750 kg Gtjdpfxswirgbe Abreu 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, Ankörnvorrichtung oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, Year of construction: 2025, neu 2025 090039 prompt, Zwischenverkauf v Spanien 15800 € 273.02 € 1 1 14220 € 50 to 177 mm 5 1 31 x 12 mm 34 1/min 350 x 15 mm 80 x 8 mm 35 / 30 mm 10 mm 100 x 10 mm 3 kW 1300 mm 1100 mm 1850 mm 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation Gsdjwirahjpfx Abrjtu 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Year of construction: 2018, condition: new, TECHNICAL CHARACTERISTICS • Punching capacity: 500KN / 50Tn • Punching: Ø31x12mm • Strokes per minute (15mm travel): 34 Godpfx Ajdx Rd Usbrotu • Throat deep: 177mm • Stroke: 50mm • L angle at 90⁰: 80x80x8mm • Flat bars: 350x10mm • Round bars: Ø35mm • Square bars: 30mm • Triangular notching: 90x42x10mm • Bending station: 100x10mm • Motor: 3KW • Net weight: 950Kg

Condition: as good as new (ex-display), Year of construction: 2024, Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Gtedpfx Ajxyyzxebrsu Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: as good as new (ex-display), Year of construction: 2023, Incl. control for entering the bending angle. Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Gsdpfxsxyyy Ue Abrjtu Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Gtodpswirfwefx Abrju Spanien 15600 € 299.52 € 55 to 750 mm 40x10 mm 37 1/min 5 kW 1930 mm 1200 mm 1800 mm 1885 kg hydr. drive Support table with stop Operating instructions in GERMAN and ENGLISH CNC options on request We have an extensive stock of punches and dies at your immediate disposal. WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 25700 € 490.87 € 80 to 500 mm 5 40/14 bzw. 24/24 mm 70 mm 40 1/min 450x15 / 300x20 mm 130x130x13 mm 45 mm 12x52x90 mm 9 kW 2310 mm 1200 mm 2050 mm Gsdpewirrwefx Abrotu 2400 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 30800 € 588.28 € 85 to 300 mm 5 40/15 bzw. 24x24 mm 450x15 / 450x18 mm 475 mm 130x130x13 mm 45/40 mm 12 mm 200x12 mm 9.2 kW 2300 mm 1200 mm 2100 mm 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 Gtjdjwiqtgopfx Abrju flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: new, Year of construction: 2024, The machine is equipped with 5 workstations: • Punching station • Flat steel shear • Angle steel shear • Notching station • Bar steel shear (round and square) Technical Data Strokes per minute at 20 mm stroke: 37 /min Throat depth: 500 mm Gsdpfx Abjx Hzf Usrjtu Punching force: 550 kN Hole diameter and thickness up to max.: 40×10 mm or 20x20 mm Flat steel up to max.: 300×15 or 200×20 mm Angle steel 90° up to max.: 130x130x13 mm Angle steel 45° up to max.: 70x70x7 mm Bar steel up to max.: 40 mm Square steel up to max.: 40 mm Notching up to max.: 10 mm

Condition: new, Year of construction: 2024, The machine has 5 workstations: • Punching station • Flat bar shear • Angle bar shear • Notching station • Bar steel shear (round and square) Technical data Godpfx Asxyyyujbrjtu Strokes per minute with 20 mm stroke: 40 /min Throat depth 500 mm Punching force 800 kN Hole diameter and thickness up to max. 40×14 mm Flat steel up to max. 450×15 or 300×20 mm Angle steel 90 degrees up to max. 152x152x13 mm Angle steel 45 degrees up to max. 70x70x7 mm Bar steel up to max. 45 mm Square steel up to max. 45 mm Notching up to max. 12 mm

Condition: used, functionality: fully functional, Year of construction: 2002, Pressure, tn: 50 Punching capacity: Ø40 mm. in 10 mm. Throat/reach: 250 mm. Flat bar: 300 x 15 mm. Round bar: Ø40 mm. Square bar: 40 x 40 mm. Angle iron: 120 x 120 x 10 mm. Notching unit: Triangular. Year: 2002 Country of origin: Spain. Size (L x W x H): 1900 x 1550 x 1750 mm. Gtedpfexyxtajx Abrou Weight: 1.400 kg. With toolholder for no. 6 and no. 8-40 tools, triangular notching station and 1000 mm. electrical length stop. All our used machines are tested and serviced before delivery.

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. Gsdpjyhd D Ijfx Abrstu - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.

Condition: used, Year of construction: 1991, pressure 70.0 t punching cross-cut in cmm 27 in 20 mm punching cross-cut in cmm 32 in 14 mm work height max. 1060 mm column arm 500 mm weight of the machine ca. 1500 kg. total power requirement 7.0 kW range L-W-H 1550 x 1200 x 1950 mm good / well-maintained condition (!!) New price approx. 21.000 euros Gtedpfx Absxabu Tsrju Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF)

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine xH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t Gjdpfx Aboxcay Herjtu -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *