Used Hose for sale (2,281)

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Iiedsz Afhpspfx Angjg Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: used, Year of construction: 2010, machine/vehicle number: Howard 1900 PLE, functionality: fully functional, operating hours: 40 h, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, total length: 5,000 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 960 kg, Equipment: CE marking, Used hose press from production conversion. The system was used for pressing or dewatering plant-based materials. On-site inspection and functional video are available upon request. • Suitable for dealers and processors in the fruit, juice, cider, or plant processing sector. • Stainless steel trays are included in the scope of delivery. • Sale due to system or process change. Isdpfx Ajzuzfnjngoig

Condition: used, Year of construction: 2010, functionality: fully functional, Used hydraulic hose cutting machine, fully functional and currently in use. Can be inspected on site. Iiodpfozphrqox Angsg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Ijdpoxdn Nrsfx Angoig Direct sale by owner. No brokers. Serious inquiries only.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, power: 4 kW (5.44 HP), We are offering this very well-maintained Uniflex HM 325.2i_C.2_FD_MVA hose crimping machine with foot pedal, year of manufacture 2020. Model: HM 325.2i_C.2_FD_MVA Iiedpfx Anjy Apdwogog Serial number: 60046 Voltage: 400 V Current: 15/8.5 A Power: 4.0 kW Frequency: 50/60 Hz Year of manufacture: 02/20 Price ex works. The machine must be collected either personally or via freight forwarding. Payment terms: 50% down payment / 50% upon collection – no cash payments! Payment by bank transfer only. Any warranty and liability are excluded. If you have any questions or require more information, please do not hesitate to send us a message.

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), overall weight: 12,000 kg, fuel type: diesel, color: yellow, fuel: diesel, gearing type: automatic, emission class: euro4, loading space width: 2,550 mm, loading space length: 5,150 mm, loading space height: 3,100 mm, Year of construction: 2012, operating hours: 6,790 h, machine/vehicle number: 17.55.856, Backhus 17.55 windrow turner together with Backhus Hose Drum HD 63 for sale. The 17.55 Machine is fully equipped in great and working condition. Manufactured in 2012 and 6790 operating hours. The machine is sold together with the Backhus Hose Drum HD63 with 200 m long hose (Drum has never been used) which can be connected to the machine for spraying the compost rows. The HD 63 drum is operated automatically via the Bachus 17.55. On demand we can send aditional pictures. Iiodpsxmvlyjfx Angog For further information please contact us.

Condition: used, functionality: fully functional, Year of construction: 2005, Tone Hose Stripping Machine RI 180 - tested Iodpfxexwvf Is Angsig - includes accessories DN 6, 8, 10, 13, 16, 25, 32, 40 - shipping possible for an additional charge

Year of construction: 2000, condition: used, New: No Attachment suited for: Agricultural machines Isdpfozta N Njx Angeig

Condition: like new (used), Year of construction: 2020, machine/vehicle number: C1-140_11, functionality: fully functional, operating hours: 10 h, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Iiodpfx Asy A Nv Hsngeg Noise level: 71 dB(A) Available immediately from stock!

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Ijdpfx Anowd Emwsgsig Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Year of construction: 2024, condition: new, functionality: fully functional, Protective cable conduits, electrical installation hoses from Pipelife at a special price. FXP20 (KUP) Total quantity: 9,000 m (180 bundles) Item number: KU-P-AS-E-MF-LSZH 20 Packaging: 50 m per bundle FXP40 (KUP) Total quantity: 6,300 m (252 bundles) Item number: KU-P-AS-E-MF-LSZH 40 Packaging: 25 m per bundle FXP25 UV (RPE) Total quantity: 11,200 m (224 bundles) Item number: RP-E-SF-UV 25 Diameter: 25 mm Packaging: 50 m per bundle Special feature: cable protection conduit with additional UV protection FXP50 UV (RPE) Total quantity: 6,000 m (240 bundles) Item number: RP-E-SF-UV 50 Diameter: 50 mm Packaging: 25 m per bundle Special feature: cable protection conduit with additional UV protection Ijdpjwtfiwsfx Angoig All items are available for immediate delivery. Partial orders are also possible.

Condition: excellent (used), Nordson Hot Melt Heated Hoses Iodpfxswuqfyo Angsig 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: E-018455, Two units are for sale. Iedpfx Anszqvafsgoig One in blue and one in green. The price quoted is for one unit.

Condition: good (used), Year of construction: 2014, ITW Dynatec Hot Melt Glue Pump Complete with two heated hoses, modules, guns and nozzles Iijdpfsurf T Dox Angsg 240 Volts 7200 Watts 50 / 60 HZ In good working condition

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): Ijdpfjzh Eh Tjx Angeig • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2018, condition: ready for operation (used), table load: 35 kg, number of axes: 3, This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details. • Conveyor • Type: Overhead monorail conveyor (frequency inverter driven) • Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min) • Reciprocator (application axis) • Max vertical stroke: 2,200 mm (adjustable) • Vertical speed: 0.14 to 0.6 m/s (adjustable) • Positioning movement: Manual adjustment • Part capacity • Workpiece material: Metal • Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm • Gauge clearance (W x H): 300 x 2,200 mm • Max load: 35 kg per 800 mm hanger rack • Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min • Powder application system • Brand/Model: Nordson Encore LT • Reciprocators: 2x electronic reciprocators • Automatic guns: 4x automatic powder guns with individual control modules • Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning • Air velocity at openings: approx. 0.5 m/s • Line components and thermal equipment • Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves • Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans • Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan • Oven burners: BALTUR (Code 17080010 / BTG 15 5060HZ) • Max operating temperature: 180°C • Utilities and technical requirements • Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz • Total electrical power: 90 kW (approx. 80 kW line requirement) • Electrical consumption: ~80% (excluding application booth) • Heating fuel: Natural gas Ijdpsz A T Rpofx Angjig • Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery) • Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application) • Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet • Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage Additional equipment • 1x Manual powder gun with integrated rack control unit • 1x Complete sieving unit with 10 m feed hose • 1x 36 kg powder hopper • 1x Recovery venturi pump

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 4 m -Connector: 3-pin -Dimensions: 300/300/H80 mm Iiodpez A T Nfjfx Angog -Weight: 1.8 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8.4 m Ijdjz A T I Uspfx Angoig -Connector: 2-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.1 kg

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: PB-S80 W-2 .11.844.921.21035/10, cutting current: 300 A, hose package length: 1,500 mm, working length: 1,500 mm, New torch hose package Kjellberg PB-S80 W-2 .11.844.921.21035/10 for Fine Focus 800 plasma system. Current new price: €8,600 – €6,500. The hose package is new and has not been used, only for the initial cutting test. The hose package length is 1.5 m. Iiodpsxbqdysfx Angeg

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: C1-140B_11, functionality: fully functional, operating hours: 10 h, CrimpOne C1-140B - Battery-Powered Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/4 inch Isdpfx Ansy A Nvtsgjig Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 1.6 kW Power supply: 12 V (DC) Crimps per hour: 250 pcs Length: 460 mm Width: 280 mm Height: 370 mm Weight: 85 kg Noise level: 71 dB(A) In stock, available immediately!

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 4 m -Connector: 5-pin Iijdpfx Anez A T Nregjg -Transport dimensions: 340/340/H100 mm -Weight: 2.4 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled DIN EN 60974 -Length: 6.5 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 3.1 kg Iijdpfoz A T Dvsx Angjg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Iedpszxggljfx Angoig Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, New: Yes Iodpfex S Nlgsx Angoig Attachment suited for: Agricultural machines

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) Iijdpfx Asy Aagisngjg 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured