Used Hose for sale (2,395)

Condition: good (used), Year of construction: 2014, ITW Dynatec Hot Melt Glue Pump Complete with two heated hoses, modules, guns and nozzles 240 Volts 7200 Watts Dcjdpfx Ajurf T Dek Asp 50 / 60 HZ In good working condition

Condition: used, MERKLE Insquare W 300 AC/DC Welding Machine with original hose set Primary: Dedpfx Akel Sm Hbs Aocp Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode Welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding Processes: 10-stage switch: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular TIG AC "Balanced TIG", Electrode Negative Electrode Positive Electrode "Sinusoidal" Electrode Rectangular Selector Switch 1: 10-stage switch: Current 1, Time 1, Ramp-up and ramp-down time, Starting current, ending current, Ignition pulse, point time, Pre-gas and post-gas time Selector Switch 2: 9-stage switch: Current 2, Time 2 (for pulse operation), AC balance, AC frequency, Hot start time and current, Current adjustment, Electrode diameter, display U Settings: 2 potentiometers for selector switch 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-stage switch: OFF, Slow pulsing, Fast pulsing, Spot welding Ignition: 4-stage switch: OFF, High frequency, Lift-TIG Energy control: 4-stage switch: on the unit, Hand or foot remote control, Welding torch Operating mode: 4-stage switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Pre-gas time: 0-3 s Post-gas time: 0-25 s Current rise time: 0-2 s Current fall time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200 % Current adjustment: 100-250 % Button: Test protection device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Rise, Current 1, Current 2, Fall, End current Power source: IGBT inverter Ignition: High frequency or Lift-TIG Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin connector Torch cooling: Water circulation cooling system Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder Gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, MORI SEIKI NHX 4000 CNC Horizontal Machining Center with Pallet Changer General Machine Data Manufacturer: MORI SEIKI Model: NHX 4000 Year of Construction: 2012 Control System: Siemens Sinumerik 840D solutionline with SLIMline operator panel Machine Type: CNC Horizontal Machining Center Number of Axes: 4 (X, Y, Z, B) Travel and Feed Rates X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm B-axis: 360° NC rotary table Rapid Traverse X/Y/Z: 60 m/min Maximum Feed Rate: 60,000 mm/min Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Interface: HSK-A63 Spindle Power: Dependent on the installed spindle version Internal Coolant Supply (ICS) through the Spindle Tool Changer Automatic Tool Changer Dcsdpfxo Agn Tle Ak Aop Tool Interface: HSK-A63 Tool Magazine: 40 positions Maximum Tool Diameter: approx. 70 mm Maximum Tool Diameter with Free Adjacent Positions: approx. 170 mm Maximum Tool Length: approx. 450 mm Maximum Tool Weight: approx. 8 kg Work Table and Pallet Changer Automatic 2-position Pallet Changer Pallet Size: 400 × 400 mm Maximum Pallet Load: approx. 400 kg Maximum Workpiece Diameter: approx. 630 mm Maximum Workpiece Height: approx. 880 mm B-axis: 360° Equipment Siemens Sinumerik 840D solutionline SLIMline operator panel HSK-A63 main spindle with 12,000 rpm Automatic Tool Changer Automatic 2-position Pallet Changer NC rotary table / B-axis Internal Coolant Supply (ICS) Chip Conveyor Coolant System Machine Dimensions and Weight Length: approx. 4,214 mm Width: approx. 2,720 mm Height: approx. 2,512 mm Machine Weight: approx. 8,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Spindle hours: 39,000

Condition: ready for operation (used), Year of construction: 2013, operating hours: 14,726 h, functionality: fully functional, total width: 1,270 mm, total length: 1,450 mm, total height: 1,420 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, type of input current: three-phase, overall weight: 635 kg, noise level: 75 dB, input voltage: 400 V, year of last overhaul: 2026, Falch R10/800 - 1000 Bar, 13lpm 2013 model Owned since new - full service history Operating hours - 14726 Dcedpj Ah E Awefx Ak Aop Unit can be seen working - slight weep on pump head. producing 1000 bar Sold as seen Complete with used dump gun, lance and 20m rubber hose Rotary nozzle to be purchased additionally Ideal for formwork cleaning, concrete removal

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: E-018455, Two units are for sale. One in blue and one in green. Dcedpezqvafofx Ak Aop The price quoted is for one unit.

Condition: ready for operation (used), Insulation hose cutting machine Maximum hose diameter: 10 mm Dodpfjylngzox Ak Ascp

Condition: good (used), functionality: fully functional, power: 69 kW (93.81 HP), fuel type: diesel, empty load weight: 14,700 kg, Year of construction: 2008, operating hours: 4,785 h, Equipment: additional headlights, air conditioning, gripper hydraulics, hammer hydraulics, standard shovel, Track excavator TAKEUCHI TB 1140 Year of manufacture: 2008 According to the hour meter: 4,785 hours 14.7 tons 69.2 kW - Powertilt with Martin M18 quick coupler - Ditch bucket 180 cm - Deep excavation bucket 110 cm - All hoses - Air conditioning - Excellent optical and technical condition - Good tracks - Well-maintained machine Selling price: €39,900 net Affordable delivery also possible! Djdpfx Akj Ah Szhj Ascp

Condition: good (used), Extruder for the production of plastic pipes Djdpjxcwxyofx Ak Ascp The machine can be inspected by appointment! Videos demonstrating its operation can be viewed on the manufacturer's website!

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Dcedpfx Aoz E Dfcsk Ajp

Condition: used, Watson Marlow 323S/D Peristaltic Pump *New price: 9890 The pumps in the 323 series feature a chemical-resistant ABS top and IP31 protection, as well as a foil keypad for controlling the pump and a digital LCD for displaying the speed. - 323S high-performance pumps with manual control - Universal pump for precise dosing or transfer applications Dsdpfx Akstnct Uj Ascp - Flow rate range: 0.1-2000 mL/min - Speed range: 3 to 400 RPM (adjustable in steps of 1 RPM) - Display type: LCD - Reversible: Yes - The pumps in the 323 series feature a chemical-resistant ABS top and IP31 protection, as well as a foil keypad for controlling the pump and a digital LCD for displaying the speed. - Dimensions (L x W x H): 230 x 230 x 132 mm - Condition: Used You can find more laboratory equipment – new and used – in our shop! International shipping costs available upon request!

Condition: used, Watson Marlow 120U/DV Peristaltic Pump *New price 9,100 The pumps in the 100 series are the ideal choice for maximizing yield in fermentation and cell culture applications. These pumps not only offer high performance and reliability but also ease of use for single-use systems. Flawless tubing changes take only a few seconds, which further increases the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our 100 series offers exactly this flexibility and purity with its exceptional speed range of 2,000:1, which is essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Dcjdpfx Akettzgde Aep Technical data: - Enclosure protection class IP 31 - Maximum pressure 30 psi - Model 120 U/DV - Flow rate 0.001 to 170 ml/min at 30 psi - Motor speed 0.1 to 200 rpm - Temperature 5 °C to 40 °C - Pump weight approx. 2 kg - Torque 0.4 Nm continuous operation - Noise level < 60 dB(A) at a distance of 1 m - Standard CE, cETLus - Power supply Supplied with 24 VDC mains transformer plug Condition: used You can find more laboratory equipment – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2018, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Sommer, 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of ... Djdpo Ahxytofx Ak Aecp

Condition: used, functionality: fully functional, type of cooling: water, ambient temperature (max.): 350 °C, ambient temperature (min.): 20 °C, input voltage: 120 V, total width: 20 mm, total length: 15 mm, total height: 23 mm, input frequency: 60 Hz, Equipment: cooling unit, freezer, type plate available, a PolyScience laboratory low-temperature cooler with an immersion probe. The long insulated hose and metal probe are part of the cooling system. Dedpfx Aj Agp Ibek Ascp This machine is used in laboratories for applications such as cooling liquids, trapping vapors, and freeze-drying work... It's a used piece of equipment but it works well

Year of construction: 2005, condition: used, stable hose reel for tough and extremely challenging applications stable durable and extremely corrosion-resistant for air, water (oil and grease) diameter of hose connection 12.5 mm (1/2 ") Dcodpfxeh A Sfle Ak Aop hose length max. 20 m possible open version housing made of cast aluminium, lacquered in space-blue  hose drum ball bearing mounted made of cast aluminium, lacquered in space-blue  can be mounted either on wall, floor or ceiling safety lock for hose drum drum bearing encapsulated drum locking mechanism sixfold rotary transmission made of brass oder brass / stainless steel  hose stop included in scope of delivery  hose outlet via 6 rolls, steplessly adjustable spring drive encapsulated max. pressure: 1.5 MPa (15 bar) hose connections: sppit with hose clamp with rubber hose, cord reinforced temperature max. 80° C space requirements depth - 760 x height - 560 x width - 320 mm weight approx.  32 kg original price approx. ? 1,600.00  - 9 units on stock -

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue pots, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm including the depicted ducting to 200mm Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Upper pressure: manual adjustment with crank and SIKO counter Infeed fence: manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue pots for quick color change from white to transparent Gluing unit with automatic edge feed for roll material up to 3mm Pressure zone with 3 rollers Miter saw with 2 motors Dedpfozn Afpsx Ak Aocp Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter, 1 motor Radius trimming blade R2, manually adjustable Glue joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual as a binder All insertable blades of the milling units and trimming blades have been replaced or re-sharpened, saws sharpened, and diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but is still sharp. Original paint, with only a few spots retouched. Dust extraction hoses renewed. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight: approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse; see "other offers from this supplier".

Year of construction: 2026, condition: like new (used), functionality: fully functional, machine/vehicle number: E31VK2608, This is the latest generation of the Vario Cooking Center, the iVario Pro XL with a 150-liter capacity, manufactured in 08/2026 and featuring Balanced Power from the premium manufacturer Rational (successor to the VCC 311). This unit is a like-new demonstration model that was only used for cooking demonstrations. The device has a sophisticated electronic control system with various cooking processes and extremely fast heating performance, making it versatile. The unit will be supplied including plastic feet. The iVario Pro XL is available relatively soon. The full Rational factory warranty is valid until 07/2028!!! A LIMITED NUMBER OF UNITS ARE AVAILABLE. The basic equipment is not included in the price and can be purchased for an additional charge. The images shown are example images; the original photos will follow shortly. Our service for you: 24 months manufacturer's warranty from the manufacturer's date (until 07/2026) High-quality branded devices at fair prices Professional refurbishment / inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1365 x 894 x 1078 mm Power connection: V: 400 / kW: 34 / Hz: 50 Serial number: E31VK2608 Year of manufacture: 08/2026 Capacity: 150 liters Weight: 245 kg Condition: Well-maintained with signs of use, inspected, fully functional Special features: iCookingSuite - intelligent cooking assistant with 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and desserts, soups and sauces, or 5 cooking processes: boiling, frying, deep-frying, stewing and finishing iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated WiFi interface, e.g. for connection to ConnectedCooking. Further information: integrated socket 230 V integrated hand shower with automatic retraction and spray dosage high-quality pot base, seamless with rounded corners core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable integrated hose shower on the unit, integrated water drain in the pot Temperature unit adjustable in °C or °F Dcedpfxj Af Nlij Ak Aep Tilting cooking pot Lid with integrated water inlet Automatic display of service messages IPX5 spray water protection USB interface for HACCP data output and updates including base cabinet with plastic feet Functions: manual mode (30°C-250°C): adjustment of liquid temperature, adjustment of pot base temperature, adjustment of oil temperature automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and deep-frying) The deep-frying function is locked but can be unlocked. Subject to changes and errors. You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Dodpey H Dbljfx Ak Ajcp Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2023, 5x Vacuum Tube Lifters with Column Slewing Crane, 4m Jib, 4m Height, 80kg Load Capacity – used –: Price per unit, ex site: €12,500 (net), dismantled, packed, and loaded! Manufacturer: Timmer Model: S5/SON Type: lightLIFT 50 kg Article No.: S5-4000/SÄ4000/43-80SO Year of manufacture: 2023, rarely used Short Description/Application: Handling of cartons up to max. 40kg Ideal for Spax cartons Tube lifter: lightLIFT 50 kg Model: UST-LL-HE-140/50-2.5-FH Lifting unit: lightLIFT with fixed handle Handle length: 300 mm Lifting capacity: 50 kg Lift tube Ø: 140 mm Lift tube length: 2,500 mm Dcjdpfsxugftex Ak Aep Unit includes: - Electric vacuum blower Medium incl. motor protection switch, enclosure for motor protection, and vibration dampers Weight: approx. 54 kg Vacuum suction hose Material: PVC Diameter: 38 mm, length: 15 m Colour: Black For vacuum generators: SMALL, MEDIUM, LARGE and vacuum pump Double holder for parking the suction pads as a clamp solution for crane column 180x180mm Dual-side mount for suction pad 62740700 and cross bar 62740650 Colour: RAL7035 light grey Column slewing crane with fastening material Column slewing crane with jibs, Type RB Load capacity: 80 kg Jib length: 4,000 mm Design: - Sturdy slewing brackets - Smooth-running jib bearings (Zedex-25/K) - Manual slewing resistance adjustment (prevents arms from swinging by themselves) - Slewing range approx. 250° each Jib Arm: - 4,000 mm jib arm length - Adjustable support strut - Jib made of profile steel - Reinforcement element - P3 profile running rails (42.5x47.5x3mm), galvanized, under the jib arms - Load capacity: 80 kg Incl. slewing angle limiter Column: - Height (lower edge of running rails): 3,500 mm - Column height: 4,000 mm - Column 180x180x6 mm - Base plate with gusset plates (600x600x15 mm, optionally 1000x1000) Original new price for the 5 units approx. €70,000 (net) Available: immediately Condition: very good Location: Hamm AB (acceptance report), operating manual, etc. available as PDF upon request.

Year of construction: 2017, condition: ready for operation (used), Max. load: 50kg, min. pick up height: 700mm, max. dropping height: 1800mm, stroke: 1100mm, the machine was hardly used, with bottom plate and documentation, without spare parts. Dcsdpfx Asl I Ewfsk Ajp

Year of construction: 2025, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2025. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It is offered with a 6-month warranty on all electrical components. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible choice of delivery or self-collection Competent advice - before and after purchase Provision of operating manuals, wiring diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: 635 x 750 x 1470 mm (2050 mm) Basket size: 500 x 500 mm Clearance height: 440 mm Program cycle time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/rinse cycle Total connected load: 10.7 kW Fuse rating: 19.5 A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Washing pump: 0.75 kW / 4.60 A Machine protection rating: IP X4 Serial number: 10640578 Year of manufacture: 2025 Condition: Used, inspected and fully functional Your advantages: Simple operation thanks to clear and easy-to-understand symbols Dsde Ahnmkopfx Ak Ajcp Digital temperature displays for washing and rinsing water 3 program cycle times Eco-filter system for the best cleaning result thanks to warmer and filtered tank water Machine and hood double-walled – ideal thermal and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent washing time extension – hygiene safety under all operating conditions Washing and rinsing systems made of stainless steel Hood start-up automatic Including lye pump, pressure booster pump and rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Further details: Rack dishwasher Structure and interior made of CrNi steel 18/10 or high-quality, corrosion-resistant materials Deep-drawn tank with easy-to-clean curves Tank and hood double-walled insulated Hood with CrNi hood handle can be opened upwards on three sides Hood start-up automatic (program start by pressing down the hood handle) CrNi rotary arm washing and rinsing systems CrNi tank cover sieve for coarse contaminants Sloping roof with an internally running water channel Supply lines outside the washing chamber Eco-filter system for the best cleaning results and the lowest cleaning effort Fully electronic control with operator display Digital temperature display for washing and rinsing water Self-cleaning program Pressureless stainless steel boiler Connection possible to the left or right Connection set, consisting of supply and drain hose and electrical cable (each 1.6 m from the machine) Wall connection profile to the rear Noise level: 65 dB(A) Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket base equipment: 1 universal basket VKV 50/1 Subject to change and errors.

Condition: used, functionality: fully functional, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Dsdpfxj Aibgmo Ak Ascp Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: good (used), Oil conveyor, hose reel, automatic hose reel, oil hose reel -Hose reel: Automatic oil hose reel -Hose length: 5400 mm Djdpouncx Nsfx Ak Aecp -Dimensions: 400/200/H495 mm -Weight: 18.2 kg

Condition: used, Year of construction: 2024, Overview Used spare parts for KRONES Contiform S PET stretch blow moulders (S8 to S24), sold individually from stock - no need to buy the complete inventory. The part descriptions name the executions S Gen. 2-3.1, S Gen. 4a, S Enviro and Enviro 2. Age and condition - Mould carriers and heating chain: 2 years old - Cams: older, without damage - Electrical parts: partly from 2005, others newer. The older ones are no longer made in this form; the alternative is a retrofit at extra cost. - All parts used, sold as-is without guarantee, subject to applicable law and the agreed sales terms Available parts (part number, description, quantity) Heating and preform handling - actuation unit T50 NRS (32) - heating chain link HZM T50 (250) - 1786323181 heating mandrel, 44 mm stroke (250) - three-phase motor 120/150 W (20) - 1786323430 reflector, complete (60) - 2800200575 energy-optimised heating box (20) Cams and locking - 1786470930 guide cam, downward (1) - 1786470940 guide cam, upward (1) - 1786470640 cam segment (1) - 1786470660 cam segment (1) - 1786470650 cam segment (1) - 1786470700 cam segment (1) - 1786470710 connecting plate (1) - 1786471180 linkage lever (1) - bearing bracket LBN-20/25 (1) - double-acting cylinder 25 mm, stroke 20 mm (1) - rod-end joint (1) - locking cam type 787 (1) - unlocking cam type 787 (1) - main cam (quantity on request) Drive and blowing modules - synchronous geared motor 11 kW (1) - 2786107120 pinion shaft, 18/24 stations (1) - 2800207818 intermediate shaft, 24 stations (1) - sealing head (1) - 2800200738 stretch module housing (10) - 9120641682 blow piston block, Enviro 2 (24) - blow slide, S Enviro (20) - 2800200762 stretch slide, S Gen. 2-3.1 (20) Mould carriers S Gen. 4a - mould carrier, complete (23) - 2800200765 base mould holder (23) - 2800200774 actuation assembly (23) Bottle transfer - 9121792003 swivel arm, infeed star (24) - 2800200556 bottle rejection assembly, 16-24 stations (2) Media and electrical - flow meter type 335 (3) - 1786411200 hose assembly, base mould (20) - 1786411210 hose assembly, mould half A (20) - 1786411220 hose assembly, mould half B (20) - power controller (20) - safety switch 250 V / 2 A (8) - Danfoss VLT 500 frequency inverter (6) Dedpfx Aks Ahxz Hj Ascp Compatibility Check the fit on your machine before purchase: send the KRONES machine model with its type plate data, the part number and, if available, the assembly or drawing number. KRONES and Contiform are trademarks of their respective owner; this is an independent offer of used spare parts. Availability Available immediately from stock; quantities subject to confirmation, photos of individual parts on request.

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder Dcodpfx Ajx I Ef Isk Asp -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

Condition: new, For sale: High-quality steel compensating hose (Ringwellschlauch) made of stainless steel, designed for industrial applications. This component is used to compensate for vibrations, thermal expansions, and stresses in piping systems. Ideal for installations: - industrial - heating Dcsdpez Smkksfx Ak Aop - gas - water - process/technological ⚙️ Technical data Type: SP20 Nominal diameter: DN100 Length: 1000 mm Pressure: PN10 Material: stainless steel 1.4404 (INOX) Standard: ISO 10380 / DIN 3384 Designation: BOA-MS (10/2022) Connections: pipe ends for welding Braid: reinforced stainless steel braid ✅ Advantages ✔ corrosion resistance ✔ high durability and flexibility ✔ vibration and noise damping ✔ compensation of thermal expansion ✔ industrial-grade product – robust construction