Used Hose for sale (2,396)

Condition: used, mileage: 131,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2027, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: Leistikow combination flushing unit * Total tank volume 9770L, diameter 1600 mm * Hydraulic, fully opening bottom flap with hydraulic-operated central locking * Sedimentation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/sludge 6880L * Position 2: Water chamber 4360/sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m high-pressure hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storage of the suction hose DN125 * High-pressure pump Uraca KD718 G60 with 648 l/min * Vacuum pump Kaiser VPC 60 with 1625 l/min * Total operating hours of the vehicle 8118 h * Hand washing basin * Cable winch, hydraulically operated, mounted on a swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via remote control * Vehicle with remote control * Axle load front axle 8.0 t, * Trailer socket 12V / 13-pin, * Audio system: CD radio (Bluetooth), * Exhaust pipe routed upwards behind the cab, * Battery 220 Ah, * Compressed air connection in the cab, * Compressed air tank, aluminum, * Electrical pre-installation in the cab 24V / 100 A, * Cab: steel-sprung, comfort, * Suspension: Front springs 8.0 t, 2 leaves, * Transmission 12-speed - Type: G 330-12, * Rear axle bevel gear 300, * Communication interface, * Fenders 3-part, * Engine compartment encapsulation reinforced, * Tag axle, steered, liftable, * Auxiliary drive MB 123-10c, * Parameterizable special module, * Reversing warning, acoustic (warning signal outside), * Rear cross member reinforced, * Circuit breaker, * Seats in the cab: Driver's seat, suspension seat, comfort, * Sun visor, external, * Sun visor, side window, driver's door, * 12V socket in the passenger footwell, * 24V / 25 A socket in the passenger footwell, Djdszz Tz Iepfx Ak Ajcp * Rotating beacon, * Twin-disc clutch, * Oil cooler, transmission Further equipment: * Emission standard EURO 6, * Axle configuration: 6x2, * Trailer brake 2 - line, * Connections on the left, trailer socket 24V / 15-pin, * Antos, * Exterior mirrors, electrically adjustable and heated, * Differential lock, rear axle, * ClassicSpace, * Storage compartment, external, left, * Cab floor with engine tunnel 320 mm, * Cab: mounting height 420 mm, * Suspension: leaf spring / air, * Power windows, * Windshield tinted, * Generator 100 A, * Transmission 12-speed - Type: G 211-12, * Urea tank (AdBlue): 60 L, * Lifting roof, manual (steel), * Info display 10.4 cm, * Comfort locking system, * Fuel tank: 290 L, aluminum, * Air intake from the front, * Air compressor 2-stage, * Engine 10.7 L - 315 kW R6 diesel (OM 470), * Tag axle, single tires, * Curb mirrors, * Waste heat recovery, * Disc brakes, front and rear axle, * Errors, changes and prior sale are reserved.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, next inspection (TÜV): 10/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Djdpfxjk E Tdae Ak Ajcp The images are archive images. The vehicle may be in use!

Condition: used, Year of construction: 1990, Technical details: Dcodpfxju Nv Dps Ak Ajp total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: new, operation weight: 355 kg, Year of construction: 2024, Bucher Polyx RC28 with neoprene scraper blade (clearing width at 30°: 2470 mm) Year of manufacture: 2024 Condition: NEW Dcodoxxyv Hepfx Ak Ajp Net price: 8,500 EUR Gross price: 10,115 EUR Equipment: - Single-blade snowplow in a robust, lightweight design, blade made of polyethylene - Powder-coated plow frame made of steel - HD lifting and lowering mechanism - HD pivoting mechanism via two hydraulic cylinders - Hydraulic hoses complete with hydraulic couplings - Pivoting damping valve - Snow dust protection - Patented neoprene scraper blade (RC version) - Plow contour lights LED - Support leg - Mounting plate (plow side) - Mounting hook, size 3 - Curb protector - Boundary flags and warning marking Offer subject to change. Errors, modifications, and prior sale are reserved. All information without guarantee. Our general terms and conditions apply. Location: Peter Meineke Becklinger Str. 17 29683 Bad Fallingbostel-Dorfmark Inspections and/or test drives only by prior appointment. Please coordinate by phone before arrival, as the vehicle/machine may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. Rotary Motor / NEW / In Stock & Immediately Available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadside verges, riverbanks, steep slopes, or for clearing around gas and electricity lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor, depending on the carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Dcjdpfx Ajyltv Iek Asp The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. An additional hydraulic circuit is needed for the hood. The machine is supplied without hoses or fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all available for immediate delivery! Please contact us for more information. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for Seppi M. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range for you! Errors and prior sale reserved! = Further Information = Please contact Marius Herden for more details.

Condition: new, For inquiries regarding this attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavators, suitable for mulching alongside riverbanks, in forests, along railway tracks, and in other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10 to 20 tons - Suitable for mounting to various mounting plates - Drive designed for hydraulic motor depending on the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front and rear chain protection - Height-adjustable skid plates reinforced with carbide plates - Color: red RAL3020 · anthracite RAL7021 Djdpfjyltwfsx Ak Ascp OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: pressure, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is necessary. The unit is supplied without hoses, fittings, and mounting plate. We have a very large range of different Seppi M. products in stock and immediately available! Mr. Herden (phone) will be happy to support you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone at ...). Seppi M. MIDI-KASTOR / 5–15 t / Stump Grinder / NEW / In stock & available immediately Price: €15,290.00 net / €18,195.10 gross - Cutter disc width: 0.10 m - Cutter disc diameter: 0.60 m - Total width: 0.80 m - Depth: 1.10 m - Height: 1.15 m - Weight: 450 kg - Stump grinder for excavator mounting - For the removal of stumps and tree roots - Grinds stumps and roots up to 30 cm deep - Suitable for excavators from 5 to 15 t Djdpfxsyl Hggs Ak Ascp - For mounting on various adapter plates - Drive designed for hydraulic motor, dependent on carrier machine flow rate - Indirect V-belt drive with 5 V-belts - Double chain protection - Rotor equipped with 32 fixed carbide-tipped tools - Colour: Red RAL3020 · Anthracite RAL7021 OPT 073 PISTON MOTOR Axial piston hydraulic motor F12-60 cm³ with pressure relief valve - Displacement in cm³: 60 - Required hydraulic pressure in bar (min–max): 200 – 350 - Required hydraulic flow rate in l/min (min–max): 70 – 100 Optional: MS08 adapter plate incl. bolts and installation = €750.00 net For operation, an independent hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drain. The device is supplied without hoses, connectors, or adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. Our warehouse carries a wide range of Seppi M. products, all available for immediate delivery! Please contact us at ... for more information. We are also happy to prepare a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Dsdpsyrqpfofx Ak Ajcp Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: used, Year of construction: 2018, mileage: 88,863 km, power: 170 kW (231.14 HP), first registration: 06/2018, overall weight: 15,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 11/2028, gearing type: mechanical, emission class: euro6, loading space volume: 6 m³, Equipment: ABS, air conditioning, Internal vehicle number: G400141 Available immediately at our yard in Kaufungen. More information: Luis Lucena Viktoria Sologubova GERMAN Mercedes-Benz ATEGO 1323 4x2 Sweeper Truck Bucher Cityfant 6000 German municipal vehicle with a Bucher-Cityfant-6000 street cleaning unit, 6 m³ stainless steel hopper, separate JCB mounting engine, and extensive safety and comfort features. Vehicle data: * Vehicle number: G400141 * Vehicle condition: Used * Category: Sweeper truck / Municipal vehicle * First registration: 06/07/2018 * Year of manufacture: 2018 * Mileage: 88,863 km * Fuel type: Diesel * Engine displacement: 5,132 cm³ * Power: 170 kW (231 hp) * Transmission: 8-speed manual transmission * Emission standard: Euro 6c * Environmental badge: 4 (Green) * Wheel arrangement: 4x2 * Axles: 2 * Permissible total weight: 15,000 kg * Unladen weight: 9,150 kg * Payload: 5,850 kg * Color: White * Seats/doors: 2/2 * MOT: new upon purchase * Inspection: due 01/2027 * 1 previous owner Djdpfoy I Hfpsx Ak Aocp Dimensions: * Length: 6,400 mm * Width: 2,550 mm * Height: 3,300 mm Street cleaning unit: * Manufacturer: Bucher Municipal AG * Type/trade name: Cityfant 6000 * Serial number: SEQ 8869 * Year of manufacture: 2018 * Hopper: 6.0 m³ * Stainless steel hopper * Hopper tilting angle: approx. 55° * Stainless steel dirt chute * Observation flaps left and right * 4-inch dirty water drain * Hopper drainage * Air shut-off valve on the suction hose * A-coupling on the air duct sieve * Multi-stage, pneumatically operated safety support * Exhaust routing through the hopper superstructure Mounting engine and sweeping technology: * Separate JCB mounting engine * Engine type: 444-TA4-55 * Power of mounting engine: 55 kW * Separate fuel tank for the mounting engine: 150 liters * Infinitely variable engine speed control * Hydraulic fan drive * Hydraulically driven roller and disc brush * Coated steel suction nozzle * Suction hose diameter: 250 mm * Swiveling tail wheels * Automatic lifting of the sweeping unit when reversing * Work lights on the sweeping unit Recorded operating data of the superstructure: * Operating hours mounting engine: 309 hrs * Operating hours superstructure: 416 hrs * Operating time sweeping unit: 335 hrs 35 min * Operating time disc brush: 316 hrs 27 min * Operating time roller brush: 85 hrs 41 min * Operating time suction fan: 334 hrs 09 min * Documented sweeping distance: 4,189 km * All values according to the display of the Bucher control terminal Water system and operation: * Stainless steel water tank: 1,900 liters * Water level indicator * Bucher Municipal instrument panel * 7-inch color display * Multi-function display * Standard control panel * Cable remote control * Warning lights and flashing beacons Chassis and equipment: * Right-hand drive * Air conditioning * Driver's air suspension seat * Electric windows * Electrically adjustable exterior mirrors * Additional thermal insulation * Radio * Cruise control * Active Brake Assist * Lane Keeping Assist * ESP * Differential lock on the rear axle * Engine brake * Speed limiter * Reversing warning * Daytime running lights * Fleetboard vehicle computer * Short ClassicSpace cab * Parabolic suspension front * Front axle 5.3 t * Pre-wiring for external bodywork * Flashing beacons * Steel rims Tires: * Tire size: 10 R 22.5 * Axle: Aeolus, tread depth approx. 13 mm * Axle: Pirelli, left approx. 7 mm, right approx. 11 mm Inspection and functional test possible after prior appointment. Further information, photo

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, parking heater, trailer coupling, From our range of new vehicles, we offer you: TLF 3000 All-Wheel Drive on a rugged MAN TGM 13.290 4x4 Off-road Chassis This vehicle is ideal for small and medium-sized fire departments in rural areas looking for a compact and robust truck capable of handling a wide variety of tasks while providing a large water supply. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission • Single tires with matching track for excellent off-road capability Dedpfsxyunasx Ak Ascp Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA holders in the crew compartment Bodywork: • High-quality frame construction using stainless and corrosion-free materials • Folding steps for each side equipment compartment • Customizable stainless steel equipment mountings to your specifications • Walkable, non-slip roof Vehicle Pump/Extinguishing Agent Tank: • Maintenance-free combined normal/high pressure pump FPN 2000-10 • PUMP&ROLL capable • Output 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating in the pump compartment Firefighting Equipment: • High-pressure rapid intervention line with 50 m of rigid hose • Foam/water monitor (2,000 l/min) mounted on the roof • Self-protection system with 4 nozzles in front of the wheels Safety and Lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system (Martin horn) • 100 W public address system with microphone • Reversing camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on the superstructure plus additional work lights • Pneumatic LED light mast with remote control • Optional hygiene board available We would be pleased to provide you with a detailed offer and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, no guarantee for completeness or accuracy. This advertisement constitutes information only and does not represent a binding offer. Subject to prior sale!

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. Dodpfx Akjvvvrpe Ascp *

Condition: used, Nordson Problue Hot Melt Pump Dcodpjwq Suusfx Ak Asp Model - Problue 10 Facility to connect up to 6 hoses 10kg Tank Capacity

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space volume: 15 m³, total length: 10,200 mm, total width: 2,500 mm, total height: 3,940 mm, suspension: air, tire size: 275/75R22,5, wheelbase: 7,020 mm, color: white, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = The Wattsnew E-Box concrete mixer is an electrically powered concrete mixer. The drive unit (E-Box) is installed in place of the diesel engine and powers the existing hydraulic pump as usual. Everything remains the same, except that the hydraulic pump is driven by an electric motor instead of an internal combustion engine. You can also easily convert your existing concrete mixer trailer to electric power by removing the diesel engine unit and installing the E-Box. Thanks to its intelligent software, the E-Box consumes little power and is extremely easy to operate. With just one button and one lever, you control the entire system. Charging is also very easy. After a day's work, simply connect the E-Box to a charging station or a standard power outlet, and the batteries will be fully charged in five hours. The Wattsnew E-Box is completely emission-free. This means no air pollution from diesel emissions, so you can work in a clean and safe environment. Your neighbors will also appreciate that you are using an emission-free and quieter machine. The use of electric vehicles and machines in the construction industry increases the chances of winning contracts. Customers and governments are increasingly demanding emission-free machines. For more information: / = Further Information = General information Year of manufacture: 2024 Design year: 2024 Applications: Construction and road construction Usable material: Concrete License plate: OT-93-FF Axle configuration Tire size: 275/75R22.5 Suspension: Air suspension Rear axle 1: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Steerable; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 2: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 3: Dual tires; Alloy wheels; Max. axle load: 10000 kg; Steerable; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Dedexv Ry Repfx Ak Ajcp Weights Unladen weight: 11,440 kg Payload: 31,560 kg GVWR: 43,000 kg Functional Brand of body: Stetter AM 15000 Number of chambers: 1 Water installation: Yes Water tank: 500 l Hoses: Yes Condition Overall condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request = Company Information = You can find our complete range here: /

Condition: excellent (used), mileage: 252,923 km, first registration: 08/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn Dodpfx Akewhpvkj Ascp - Media system - Particulate filter - Sleeper cab - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication = Additional Information = General Information: Usable material: Concrete Technical Information: Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 9,637 kg Axle Configuration: Front axle: Steered Rear axle 1: Dual tires Rear axle 2: Dual tires Functional: Superstructure manufacturer: DE BUF ST2 2-AXLE 10M3 CONCRETE MIXER High-pressure pump: Yes Water installation: Yes Water tank: 685 l Hoses: Yes Condition: Technical condition: Very good Optical condition: Very good DAF CF 510 6X4 TRACTOR UNIT WITH 2-AXLE SEMI-TRAILER WITH DE BUF 12 M3 CONCRETE MIXER EURO 6 L PACKAGE 510 HP DRIVE 6X4 AIR-SUSPENDED WHEELBASE 320 CM CF SLEEPER CAB WITH AIR CONDITIONING AND FRIDGE MANUAL TRANSMISSION ENGINE BRAKE 252,923 KM DE BUF 2-AXLE SEMI-TRAILER WITH 12 M3 CONCRETE MIXER 2 AXLES SAF AXLES LAST AXLE STEERABLE DRUM VOLUME 12 M3 2X WATER TANK CAPACITY 625 L CAPACITY 60 L WATER HOSE CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES WE HAVE FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: ready for operation (used), RINGLER Industrial vacuum cleaner Type: AT-D 4.0 kW Dsdpfjxc Eq Rsx Ak Ajcp Device no.: 96231 Year of manufacture: 1989 Equipment: - Suction hose, new - Chassis - Documentation

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l Dsdpsxgumcjfx Ak Ascp – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: new, Seppi M. KASTOR hyd to / Stump Grinder / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €26,290.00 net / €31,285.10 gross - Cutting disc width: 0.11 m - Cutting disc diameter: 0.90 m - Overall width: 0.88 m - Depth: 1.80 m - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator mounting - For removing stumps and tree roots - Grinds tree stumps and roots up to 50 cm deep - For excavators from t - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier device - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Protection by double chains - Rotor with 50 fixed, carbide-tipped tools - Color: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with overpressure valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate in l/min (min-max): 140 – 220 An autonomous hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. Dcodpfx Aksznru Ts Ajp We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale reserved! = Further information = Unladen weight: 868 kg Please contact Marius Herden for more information.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, inverter welding machine -Manufacturer: Ess, MIG/MAG gas-shielded welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg Dcsdpfxezrt E Us Ak Aop

Condition: new, power: 316 kW (429.64 HP), first registration: 07/2023, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, loading space volume: 20 m³, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - PTO = Notes = Fuel tank: 290 liters Air conditioning Equipped with a Ravasini fuel tank with a capacity of 20,000 liters. Three compartments (6,800 l + 6,500 l + 6,800 l + expansion volume) Manhole with cover, 500 mm diameter, complete with inlet and breathing valve, and including a collection basin in case of liquid spillage from the manhole. Dsdpjzn U Hxjfx Ak Ajcp Pumping unit housed in a suitable stainless steel box, positioned on the rear side of the vehicle. Positive displacement pump, 500 l/min. Liter counter with a flow rate of 550 l/min, complete with filter, degasser, check valve, with a positive displacement head providing partial measurement with 5 resettable digits and total measurement with 7 non-resettable digits. Manually operated hose reel with 20 m of 1.5-inch hose and delivery gun. = Further Information = General Information Year of construction: 2023 Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Transmission: ZF16TX2240TO, automatic Axle Configuration Tire size: 315/80R22.5 Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 13,400 kg Payload: 20,100 kg GVWR: 33,500 kg Functional Body manufacturer: Ravasini Number of compartments: 3 Pump: Yes Hoses: Yes

Condition: used, mileage: 107,492 km, power: 265 kW (360.30 HP), first registration: 03/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2028, color: silver, gearing type: mechanical, emission class: euro4, loading space volume: 7 m³, Year of construction: 2007, Equipment: ABS, air conditioning, l/min at 10 bar * High-pressure hose boom: DN32 * Cassette boom: DN25/32 * High-pressure hose reel: DN32 * Rotor connection: DN32 Dcsdpfxszpcxxe Ak Aop * Hose swivel * Hand spray gun SP200 * Overflow valve RV3 * Oil/air cooler * Winch * Hose coiler * MPA valve manifolds * Compressed air maintenance unit Inspection possible by prior appointment. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale.

Condition: new, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our range of new vehicles, we offer you: TLF 4000 all-wheel drive with 5,000 liters of water on an off-road MAN TGM 18.320 all-wheel drive chassis. Our "Water Buffalo" on a MAN chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 hp (235 kW) • Automated transmission • Off-road tires • Matching single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 PA mountings in the crew compartment Superstructure: • High-quality superstructure in a frame construction made of rust- and corrosion-free material Dcsdpfx Akjzmyy Ue Aep • Fold-out steps for each side equipment compartment • Individually customized equipment storage made of stainless steel according to your wishes • Walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP&ROLL capable • Performance 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam mixing system • Water tank 5,000 l with integrated foam tank 500 l • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure quick-attack system with 50 m kink-resistant hose • Foam/water monitor 2,000 l/min on the vehicle roof • Self-protection system with 4 extinguishing nozzles in front of the tires Safety and lighting: • LED light bar on the vehicle roof/2 LED front warning lights • Pneumatic special signal system Martin horn • Public address system 100 W with intercom unit • Reversing camera • Comprehensive LED lighting in the crew and all equipment compartments • LED ambient lighting on the superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board on request We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 10/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Dcodpfsy R Ipnox Ak Aop Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) Dcodpfx Aozgckcjk Aep 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Dcjdpfszgclmox Ak Aop Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device 8" suction port at the rear top 6x LED work lights Dodpfxjz Am Evs Ak Ascp Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY.