Used Forestry for sale (167)

Condition: used, Year of construction: 2000, operating hours: 1 h, power: 206 kW (280.08 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, cabin, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Dwedpfez H Elmox Ai Eed Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system German vehicle from the second owner Very good and well-maintained condition Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: used, Year of construction: 1982, Equipment: cabin, MB-Trac 800 Central gear shift Hydraulics Forestry equipment was only installed after refurbishment. The vehicle has never worked in the forest! Dwedpfjxrivpjx Ai Eod

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 13,544 h, overall weight: 18,400 kg, John Deere 1270E Harvester, Forestry Machine, Unit H480C Used, from business liquidation Year of manufacture: 2013 Total operating hours: 13,544 hrs Important: The stated price includes 19% VAT. An invoice will be issued upon purchase. Equipment according to manufacturer: Cab, rear-view camera, multi-function armrest, Operator terminal Touch 10.6, Krahn CH 7, reach 10 m Power: 170 kW / 228 hp Hydrostatic-mechanical 2-speed gearbox Speed: 20 km/h Dodpfx Ajz Izzyoi Eowd Tires (front): 710/45R26.5 TRS Tires (rear): 710/55R34 Work lights 4x rear Work lights 4x front All-wheel drive Self-leveling and rotating cab Air-suspended seat Radio Reversing device Automatic climate control Cab suspension (hydraulic) Fuel tank 435 l Hydraulic oil tank 302 l Transport height: 3700 mm Length without CH7 crane: 7600 mm Width including 710 tires: 2900 mm Machine weight: 18,400 kg We recommend an inspection to avoid misunderstandings. Information without guarantee Information, details and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desirable, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Seppi M. MINI-BMS 105 / Forestry mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 tons / DEMO – unit / in stock & immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches bushes and shrubs up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 Dwodpfxsy Rdnao Ai Ejd OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - approx. 200 mm high We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Seppi products that are immediately available! Please contact us at [phone number] / [email address] for more information. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi range! Errors and prior sale excepted! Internal No.: 170051 = Further information = Year of construction: 2024 Please contact Marius Herden for more information.

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: ZHK00001, Compressed air system, crane 8200, dual-pump oil supply, used exclusively for private purposes. Dodpfozycywex Ai Eswd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 4056501, operating hours: 744 h, total length: 3,200 mm, total width: 1,310 mm, overall weight: 1,700 kg, first registration: 11/2024, empty load weight: 1,420 kg, color: orange, maximum speed: 7 km/h, Equipment: lighting, onboard computer, The McConnel Robocut T600 is a powerful, radio-controlled tracked vehicle and mowing machine designed for heavy-duty work in hazardous, steep, or hard-to-reach terrains. Key specifications and features: • Engine: Stage V Hatz diesel engine (approx. 60 hp / 56–60 hp) • Weight: 1,420 kg • Operation on slopes: Can operate safely on slopes up to 55° (with alarm and automatic shut-off at extreme angles). Dwodo Agvb Aepfx Ai Esd • Weight distribution & stability: 50/50 weight distribution and a low center of gravity, equipped with double roll bars. • Transmission: Hydrostatic drive with increased track drive pressure. • Remote control: Proportional or precision digital remote control with a range of up to 150 meters. • Optional GPS: Prepared for/can be equipped with Trimble GPS auto-steering for automated mowing routes. • Mowing/working widths: Suitable for mowing heads/cutters from 1.3 m to 1.9 m wide. • Hydraulics: Hydraulic lift from -300 mm to +400 mm and a hydraulic floatation system. • Self-cleaning functions: Equipped with an automatic radiator cleaning system. Equipped with a forestry flail rotor with moving blades, 1.30 m wide. Optionally equipped with a forestry rotor with fixed blades, 1.25 m wide.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. MINI-BMS 105 / 5-10 tons / Forestry Mulcher / CUT CONTROL / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches bushes and shrubs up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide pads) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. For the drive, a self-contained hydraulic system is recommended. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. Dwsdpfxsyltv Uj Ai Eed We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. program! Errors and prior sale excepted! Internal No.: 170048 Year of manufacture: 2023 Please contact Marius Herden for further information.

Condition: used, power: 200 kW (271.92 HP), first registration: 05/2018, front tire size: 710-26,5, rear tire size: 710-26,5, mileage: 11,870 km, axle configuration: > 3 axles, number of seats: 1, Equipment: cabin, crane, | John Deere 1270G Harvester | Auxiliary heater | 11,870 operating hours | 8x8 drive | Rotatable cabin | Air conditioning | Good condition | Fully operational | Drive: Hydrostatic/mechanical power transmission with 2-speed gearbox | Load-sensing hydraulic system, stabilization brake | Engine: 6-cylinder John Deere 6090 PowerTech PLUS engine compliant with EPA FT4/EU Stage V emission standards | 200 kW, 1315 Nm @ 1200-1400 rpm | Reversible hydraulic fan, PowerCore air filter, glycol-based coolant | Tires: Front axle (4) 710-26.5 Nokian Forest King F2 (3050 mm), Rear axle (4) 710-26.5 Nokian Forest King F2 (3050 mm) | Crane: Parallel boom CH7 (10 m reach), gross lifting torque 197 kNm, slewing torque 50 kNm, slewing angle 220°, endless rotator Black Bruin BBR 15 HD with braked pendulum | Subject to errors, data entry errors and prior sale. Dsdj Agc Abepfx Ai Eewd

Condition: used, first registration: 06/1978, color: green, Equipment: trailer coupling, = Additional options and accessories = Dsdpfxjxdvqqo Ai Ejwd - Power steering = Further information = Odometer reading: 15,715 km Drive: All-wheel drive Unladen weight: 3,950 kg Gross vehicle weight: 3,950 kg Manufacturer: Mercedes Benz, Mercedes Benzstrasse 100, 70372 Stuttgart, DE

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (by phone at ...). Used EBERT forestry semi-trailer, low-bed type Tvp: TLS 36 ST with VIN: W0985180080D17001. Self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS. First registration: 03/2008, Permissible total weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg. The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5, low-profile tubeless. Tire tread: 1st axle 9-12mm, 2nd axle 7-11mm. Axles: 2 x 10 tons. Axles with S-cam brakes and ABS, hydraulic dual-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drawbar eye. 24V electric generator with HD piston pump, oil tank, and 2 batteries allow remote-controlled functions with wireless operation. Brakes: Two-line brake system according to EC, with spring-loaded brake cylinders acting on the rear axles. With ABS. Lighting according to StVZO. Integrated into a recessed under-run protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth. The hydraulic forced steering is equipped as standard with a wireless remote control, so the driver can "steer" from the cab during tight hairpin turns and when maneuvering. Options included in the price: Dwedpfx Asz Engkji Eed a. Yellow rotating beacon, rear, pluggable b. with 4 pull-out marker panels (red/white) with an extended width of 2,550 mm when retracted and 2,750 mm or 3,000 mm when extended. c. with electro-hydraulically operated access ramps. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further Information = Year of construction: 2008 Unladen weight: 9,000 kg Payload: 27,000 kg GVWR: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. Dwjdsyltvbepfx Ai Ejd The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: new, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 62,000 mm, loading space width: 25,000 mm, Equipment: ABS, EBS, air conditioning, = Additional Options and Accessories = - Braking system = Notes = Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), Rear axle 13.4 t, Tag axle 8.0 t steered & liftable, Electronic braking system with ABS and ASR, Retarder, Trailer brake 2-line, Wheelbase 4,800 mm, Stabilizer on front axle, Rear underrun protection, Front underrun protection, Compressed air connection in the cab, air-sprung driver's comfort suspension seat, functional co-driver's seat, side sun visor on driver's side, air conditioning, hot water auxiliary heater, circuit breakers, voltage converter 24 V / 12 V, power socket 24V / 25A in the co-driver's footwell, parameterizable special module PSM, trailer socket 24V / 15-pole, M cab StreamSpace 2.30m, comfort cab suspension, sun visor, heated front mirror, air horn, movable cab entry, comfort locking system with central locking, Mercedes PowerShift 3, axle configuration 6x2 with HAD, 26.0-tonner, air suspension rear axle, radio/CD with Bluetooth, axle load measuring device, pre-wiring for CB radio, pre-wiring for toll collection, main tank 510 L, AdBlue tank 60 L, Euro 6, air compressor 2-cylinder, transmission oil cooler, trailer coupling, stability assistant, cruise control, and much more.... Box with hydraulic flaps, length: 6,200mm, volume: 41 cbm, box KTL-coated, Crane: Palfinger Q170L with 2 hydraulic supports, liftable cabin with auxiliary heater, fully hydraulic double telescope (reach 11.5 m!), oil cooler, rotator, Optional equipment: - Wood grapple Epsilon FG53 - GMT 050 with and without TTC - Quick-change system between felling grapple and wood grapple - extendable heavy-duty drawer for wood grapple / felling grapple - front scraper over cab with crane storage Area of application: Processing and removal of cut timber. Dsdpfxsyfpn Ts Ai Eswd Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ...) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! ESP, auxiliary heater Cab: Long-distance transport = Further information = Year of manufacture: 2024 Cabin: High sleeper cab Engine displacement: 12,800 cc GVW: 26,000 kg Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, fuel type: diesel, color: white, Equipment: additional headlights, air conditioning, cabin, lighting, For sale is a used Syncrofalke 3t cable crane ("mountain harvester"), manufactured by Mayr Melnhof Forsttechnik GmbH for forestry operations. Dedpfx Aiewtw Ape Eswd Year of manufacture: 2017 Equipped with a Woody 60 processor head (including a flail saw). Carriage: Sherpa U Carrier vehicle: MAN TGS Can be inspected at any time during operation. Special features: Ideal for steep slopes and difficult terrain! Very robust design for full-scale forestry operations. Regular maintenance – ready for immediate use! Condition: Technically and visually well-maintained. Ready for use without any outstanding maintenance requirements.

Condition: used, Year of construction: 2022, operating hours: 359 h, Radio-controlled tool carrier with grass mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier that can also be used on particularly challenging and hard-to-reach terrains with inclines of up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections, ensuring compatibility with a variety of attachments. Features: * 150 m radio control range * Optimal maneuverability * Ground adherence in all directions up to 55° * Special oil sump for secure engine lubrication * Multifunctional application * High performance, fast completion of work Dodpfxezviyps Ai Ejwd * Excellent traction on any surface Optional equipment: * Hydraulic quick couplings "CEJN" * EU DUAL BAND radio control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator protection * Counterweights, approx. 70 kg * 12 Volt LED beacon with bayonet lock Attachment: Energreen Head 130 with hydraulic quick couplers "CEJN" and hammer flails Robust, reliable mulcher made from Strenx® steel, ideal for cutting grass and shrubs up to 3 cm in diameter. Rotor with hammer flails, adjustable cutting height. Technical data: Working width: 1300 mm Oil pressure: 290 bar Number of tools: 22 Oil flow: 52 l/min Hydraulic motor: 21 cm3 Weight: 220 kg We also have other grass mulchers, forestry mulchers, brush cutters, and a stump grinder in stock. Additional attachments such as double-blade mowers, boom mowers, and many other implements are available on request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new machines in stock, as well as additional units for demonstration purposes. Contact us! We also rent out all machines with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible. * Sale price excludes transport. * No liability for printing and typographical errors. * Subject to error, change, and prior sale. * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (at tel. ). Seppi M. MINI-BMS 105 forestry mulcher / MS08 / 5-10 tons / CUT CONTROL / NEW / in stock & immediately available Price: €16,790.00 net / €19,980.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches shrubs and trees up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools Dwjdpfxoyltvnj Ai Eod OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 40 - 100 Intermediate adapter for BE314 Z1 - Approx. 200 mm high - Not required with OPT 372 hydraulic 190° swivel device Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net A self-contained hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: used, JCB 270T S5 Delta loader Forestry cab armour (ideal for mulching!) Only 206 hours! Year of manufacture 2024 Rubber tracks 450 mm (86 mm pitch x 56 links) 74 hp/55 kW JCB turbo engine 2 driving speeds LED headlights front and rear Cab door opens sideways to the rear for easier entry and exit Cab with heating and air conditioning Reversing alarm Radio and speakers Landscaping bucket 2,134 mm wide (0.64 m³) Industrial fork carrier Smooth Ride System Hydraulic quick coupler Ready for immediate use, many other attachments in stock. We expressly request that you make an appointment to view the vehicle. We will be happy to provide you with a leasing or financing offer on request. Mr. Mihm (tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Quick change system = Further information = Year of manufacture: 2024 Operating hours: 206 Dedpfx Aisyfrgfj Ejwd Drive: Tracked Please contact Tobias Ebert for further information.

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 18,000 h, SAMPO-ROSENLEW 1066 — forest harvester Year 2005 · 18,000 hours · 4-wheel drive EQUIPMENT • KETO 150 SUPREME harvester head Dsdpfx Aspugxnji Ejwd • AGCO Sisu 6-cylinder engine • EPEC 4W30 control system, IQAN display • Measuring equipment • Air conditioning • Vacuum pump • Feed rollers • Wheel chains included • Built in Finland RECENT MAINTENANCE • New injection pump • Reconditioned distributors • Reconditioned working pump (100 h) Machine in good working order, ready to work. Available for inspection and testing on site in Teiu, Hunedoara county, Romania. Price EUR 19,000 ex works Teiu, excluding VAT. Intra-EU supply at 0 % with reverse charge for VAT-registered buyers in the EU.

Condition: new, mileage: 420 km, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, = Further options and accessories = - Brake system Dsdpfx Aioyfqvfo Ejwd = Notes = Arocs 2751 6x2 HAD - pre-equipped for forestry crane operation!! Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), rear axle 13.4 t, steering and liftable trailing axle 8.0 t, electronic brake system with ABS and ASR, retarder, two-line trailer brake, wheelbase 4,800 mm, stabilizer on front axle, extendable rear underrun protection, front underrun protection, compressed air connection in cab, air-suspended driver’s comfort swing seat, functional passenger seat, air conditioning, transparent external sun visor, comfort steel-spring cab suspension, M-Cab ClassicSpace, reinforced end cross member, interactive multimedia cockpit, navigation system, LED fog lights, construction rear lights, 2 low LED revolving beacons, body: Hyva-Lift roll-off tipper 20-60 Titan, hook height: 1,570 mm, container length: 4,500 mm to 7,000 mm, lifting force: 200 kN, container with crane platform, capacity: approx. 30 cbm, container length 7,000 mm, recessed hook, foldable protection roof 2,000 mm with hand pump, crane: Epsilon Q150L, crane cabin available on request, length: 9.7 m Application area: Processing and transport of cut material. We will be happy to provide you with a leasing or financing offer from Mercedes-Benz Bank on request. Mr. Ebert and Mr. Seidel (Tel. ...) will be pleased to assist you. For further information, please visit our homepage. !Subject to changes, errors, and prior sale! ESP, navigation system Cabin: Local traffic = Further information = Engine displacement: 12,809 cc Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2023, operating hours: 349 h, Radio-Controlled Tool Carrier with Forestry Mulcher The Energreen RoboEVO is a radio-controlled tool carrier capable of operating in particularly challenging and hard-to-access terrain, with slopes of up to 55°. It is equipped with a powerful 40 HP diesel engine and two double-acting hydraulic control valves to ensure compatibility with a range of attachments. Key Features: * Radio control range up to 150 m * Optimal maneuverability * Traction in all directions on slopes up to 55° * Special oil sump for secure engine lubrication * Multifunctional operation * High productivity with fast completion of tasks * Superior traction on any substrate Special Equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio control with tilt sensor * PANOLIN HLP SYNTH 46 bio-hydraulic oil * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights, total 70 kg * 1 LED work light * 12-Volt LED beacon with bayonet fitting Attachment: Forestry Mulcher Forestry Head 130T with hydraulic quick couplers "CEJN", rotor with fixed tools and material guide frame. Robust and reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes, and reeds up to 10 cm in diameter. Fixed-tool rotor for shredding cut material. TECHNICAL DATA Cutting width: 1,200 mm Oil pressure: 290 bar Number of tools: 32 Oil flow: 55 l/min Hydraulic motor: 23 cm³ Weight: 355 kg We also stock additional grass mulchers, forestry mulchers, brush cutter heads, and a stump grinder. Other attachments such as double-blade mowers, verge mowers, and many other implements available on request! We are pleased to offer suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always keep a selection of new and used equipment in stock, with additional units available for demonstration. Please contact us! All machines are also available for rent with or without operator. Dwedpfx Asy E Dt Eei Ejd Other notes: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport. * No liability for printing or typographical errors. * Subject to error, prior sale, and change. * Offer is non-binding. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: new, For inquiries regarding this attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavators, suitable for mulching alongside riverbanks, in forests, along railway tracks, and in other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10 to 20 tons - Suitable for mounting to various mounting plates - Drive designed for hydraulic motor depending on the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front and rear chain protection - Height-adjustable skid plates reinforced with carbide plates - Color: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: pressure, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is necessary. The unit is supplied without hoses, fittings, and mounting plate. We have a very large range of different Seppi M. products in stock and immediately available! Mr. Herden (phone) will be happy to support you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Errors and prior sale excepted! Dwjdpfx Asyltwfei Ejd = Further information = Please contact Marius Herden for further details.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 Dwedpfxoyltvuj Ai Eod OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: new, axle configuration: 2 axles, Equipment: ABS, Technical data for EBERT TLS 43 ATV special low loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Tare weight according to DIN: approx. 12,500 kg, Low bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 2,700 mm, Outer width: 2,550 mm, Loading edge/low bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low bed to: 3,050 mm, Low bed/telescoping by: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2K paint, Overwidth signage front and rear with red/white signs Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from outside in the corners on the left and right, Storage box with cover behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, Spare wheel on the upper deck, behind the partition on the right, Steps on the right side to get from the low bed to the front upper deck, Hydraulic coupling for decoupling on the left side, 6-fold Multi-Faster coupling, 6 lashing points, 3,000 kg capacity, externally on the upper deck / recessed lashing eyes, 2 lashing points, 5,000 kg capacity, on top of the longitudinal girders (towards the rear) Low bed: Climbing aids on the boom – extension, Low bed telescoping by 4,000 mm and lockable every 500 mm, With sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg capacity, externally in the outer frame, 24 attachment tubes 90x90, evenly distributed for low bed widening to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck sloping and perforated for retrofitting ramps, galvanized with adapters. Ramp retaining profiles (Altec) – C-rails at the rear, 6 lashing points, 10,000 kg capacity, externally on the upper deck, 6 lashing points, 5,000 kg capacity, in the excavator well, 8 lashing points, 5,000 kg capacity, for overwidth in the outer frame, Closing of the excavator well at the front and rear with a wooden floor panel (insertable) Electrical system: Use NATO connector, Power comes from the towing vehicle, Rotating beacon at the rear center, Side lights in LED design, Standard rear light for upright mounting (LC5), Work spotlights on the upper deck, to illuminate the low bed, Decoupling: Sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60 l (2x 10 l, 2x 20 l), TEBS modulator, Locking of the extension to the left and right (valve on the side in the rear upper deck), Double shut-off valve Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck Accessories: 2x 4 pieces of wooden plank as support for widening the low bed and intermediate table, 2 pieces of securing wedges for decoupling, 4 pieces of support wedges Upon request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. You can find more information on our homepage. Errors and prior sale are subject to change! Rental possible = Further information = Year of construction: 2021 Tare weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Dwsdpfx Aioyfvwbo Eed Please contact Tobias Ebert for more information.

Condition: new, axle configuration: 3 axles, Equipment: ABS, Technical data for EBERT TLS 43 ATV special low-bed semi-trailer: Permissible fifth-wheel load: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Tare weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle distance: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2-component paint, Overwidth signage at the front and rear with red/white signs Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Side boards 600 mm high, corners on the front upper deck angled, doors accessible from the outside in the corners on the left and right, lockable storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for uncoupling on the left side, 6-point Multi-Faster coupling, 6 lashing points 3,000 kg version on the outside of the upper deck (eye lashing points), 2 lashing points 5,000 kg version on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the outrigger – extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points 10,000 kg version on the outside in the outer frame, 24 insertion tubes 90 x 90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters of galvanized design, Ramp attachment profiles (Altec) – C-rails at the rear, 8 lashing points 10,000 kg version on the outside on the upper deck, 6 lashing points 5,000 kg version in the excavator well, 10 lashing points 5,000 kg version in case of overwidth in the outer frame, closing of the excavator well at the front and rear with a wooden floor plate (insertable) Electrical system: NATO socket used, power comes from the towing vehicle, rotating beacon at the rear in the middle, side lights in LED design, standard rear light for upright mounting (LC5), work spotlights on the upper deck, for illuminating the low-bed, overwidth signage at the front and rear for controlling the uncoupling, sensor for securing and pressure switch for the suspension Air system: Aluminum air tank 80 l, TEBS modulator, locking of the extension on the left and right (valve on the side in the rear upper deck), double shut-off valve Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable swan neck Accessories: 2 x 4 pieces of wooden plank as support for widening the low-bed and intermediate table, 2 pieces of securing wedges for uncoupling, 4 pieces of chock blocks Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ...) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale are excepted! Rental possible Year of construction: 2022 GVWR: 55,000 kg Inquire... Dwjdpfx Aieyfu N Aj Eod

Condition: used, For inquiries regarding the forestry equipment, please contact Mr. Herden (tel. ). Westtech Woodcracker C250 felling grapple / incl. sorting grapple / incl. MS08 adapter plate / in stock & immediately available / year of manufacture: 2018 Price: 10,890.00 € net / 12,959.10 € gross - Cutting diameter softwood (mm): 330 - Cutting diameter hardwood (mm): 280 - Grapple opening (mm): 930 - Shear opening (mm): 450 - Own weight (base – fully equipped) (kg): 580-970 - Recommended flow rate (l/min.): 50-100 - Recommended flow rate for auxiliary functions (l/min.): 35-50 - Recommended operating pressure (bar): 280 - Service weight carrier vehicle (t): 7-15 Equipment: - incl. sorting grapple - incl. MS08 adapter plate - incl. hoses and couplings (as shown) We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are the official Westtech sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Holp sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official Magni telehandler sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Westtech Woodcracker program! Errors and prior sale excepted! Internal No.: 318328 Dsdpfx Ae Aintxoi Eswd = Further information = Year of manufacture: 2018 New: No Part suitable for: Intended use forestry Please contact Marius Herden for further information.

Condition: good (used), functionality: fully functional, Year of construction: 2024, operating hours: 2,980 h, overall weight: 18,000 kg, empty load weight: 17,500 kg, fuel type: diesel, Minimum cable breaking strength left/right: 200 kN, max. tensile force left/right, 1st position: 100 kN. Dwedpfx Aie Aa Rf Es Eed Hydraulic grab arm (manufacturer: Palfinger, type: Epsilon), operating hours recorded: 2,984 h. Plus additional Holp attachment arm with Rototop attachment, type: KF 95.1.102, serial number: 2408201, year of manufacture: 2024, 1 V-shaped digging bucket, manufacturer: Holp, type: VL 112.400, serial number: 2408199, year of manufacture: 2024.