Used Forestry for sale (168)

Condition: new, Log Debarker – Business Benefits Increases production throughput with stable, continuous operation Dedpen Tm Trsfx Ai Ejwd Reduces unplanned downtime and maintenance interventions Lowers operating and spare-part costs with heavy-duty, long-life design Minimizes material loss and improves downstream process efficiency Ensures predictable performance for planning and cost control Designed for harsh industrial conditions and high-volume production

Condition: good (used), empty load weight: 4,620 kg, overall weight: 14,000 kg, trailer brake: trailer braked, Year of construction: 2025, Large model, central tube frame 300x300 mm, payload in forestry operations up to 14 tons, Hydraulic steering with 2 steering cylinders, Without drive unit, Stanchion supports, 4 pieces, adjustable on the frame: Pair 1 permanently connected to the front grille Pair 2 variably adjustable Pair 3 permanently connected to the axle housing Pair 4 variably adjustable, 6 lashing points, LED lighting 12/24V according to StVZO (German Road Traffic Licensing Regulations), Dwjdpfxs Aa Rgvo Ai Eed Support leg with crank and plate foot, Painting of all components in matte black, General operating permit for 25 km/h on roads, wheels 710/40-22.5 Alliance Forestar 344.

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early model fire engine, second owner, which has never been used for civilian purposes. Vintage vehicle inspection (according to §23 StVZO for the allocation of an H-registration plate) passed recently. MOT valid until 09/2027 ("no defects found" at DEKRA). Dodpfx Ajxthdzei Ejwd Year of manufacture 1981 / First registration month: 07-1981. Original, only 29,800 total kilometers driven. Only used for fire service up to now. Advanced emergency vehicle (VRW) with ZIEGLER body and Knurz-Kirsch generator with 5 kVA output. German-made, kept in a garage, with the original vehicle registration document (only 2 owners) and was registered until recently. The vehicle manufacturer listed in the original documents is GFG "Geländefahrzeug-Gesellschaft", which at the time was a joint production of Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles built with this manufacturer designation; shortly thereafter, "Daimler-Benz" was also listed as the vehicle manufacturer in the registration documents. A complete MATTER roll bar was installed in the vehicle in 1991 (properly registered in the documents). Included is a small roof rack system for transporting long equipment. The long 280 GE is the largest and most powerful of the first G-series, and is what could be ordered as standard from the factory as a Mercedes G-Class in the early years. The six-cylinder inline gasoline engine M110 with 2717 ccm and 115 kW/156 hp starts and runs well. 4-speed manual transmission plus locking differentials. Power steering. 155 km/h is listed as the maximum speed. A side power take-off for operating the generator is also present. The vehicle was most recently used primarily to transport a portable fire pump with suction hoses and accessories. Therefore, there are no seats in the back, and it has a loading area like a truck. Unfortunately, no other seats are available besides the 2 front seats. According to the original documents, it is a "3-seater" and the type of registration is "Other motor vehicle, fire engine, advanced emergency vehicle VRW". The unladen weight is stated as 2360 kg. The permissible total weight (originally 2900 kg) was increased to 3030 kg in 1991, according to the entry in the vehicle documents. Therefore, this 280 GE currently has a payload of 670 kg. Overall vehicle dimensions: length 4395 mm / width 1700 mm / height 2150 mm. Tires 205/80R16 in good condition. Winter tires with the snowflake symbol according to current legal requirements are mounted (DOT 2018). Although the G does not have a trailer hitch, the necessary base frame is installed. Unfortunately, it is not possible to provide information on retrofitting/trailer load, as the corresponding fields for the trailer load in the original registration document are marked with "not applicable". According to the oral account of the last vehicle owner, the Mercedes has not been involved in any accidents, but this cannot be documented in writing and is therefore passed on to the buyer as "information". The 280 GE was driven a long distance on the highway to us, which it completed without any problems. A new battery has recently been installed, and the gear linkage has been newly fitted. The off-road vehicle is immediately available and is looking forward to new tasks. This offer is only valid for commercial enterprises, freelancers, authorities, emergency services, agriculture and forestry, and similar self-employed individuals. Sale to purely privat

Year of construction: 2018, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Westtech Woodcracker C250 / Tiltator / Grapple / immediately available / Year of manufacture: 2018 / Top condition! Price: 19,990.00 € net / 23,788.10 € gross - Cutting diameter softwood (mm): 330 - Cutting diameter hardwood (mm): 280 - Grapple opening (mm): 930 - Shear opening (mm): 450 - Self-weight (base – full equipment) (kg): 580-970 - Recommended flow rate (l/min.): 50-100 - Recommended flow rate for auxiliary functions (l/min.): 35-50 - Recommended operating pressure (bar): 280 - Service weight of carrier vehicle * (t): 7-15 Equipment: - incl. Tiltator, infinitely rotatable - incl. Grapple - incl. Autospeed function - incl. Multigrip integrated We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official DMS sales and service partner. Dodpfx Aoznrutoi Eewd We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sales excepted! Internal No.: 318367 = Further information = Year of manufacture: 2018 New: No Part suitable for: Application Forestry Please contact Marius Herden for further information.

Condition: used, Hitachi ZX225USLC-6 forestry excavator, year of manufacture: 2021, operating hours: only 1,690 h, includes Vosch grapple saw, includes hydraulic trench cleaner 1,600 mm, air conditioning, camera, OQ65 quick coupler, central lubrication, foldable front and roof protective canopy, hydraulic protection on the boom, additional weight at the rear, weight: 28,100 kg, engine [128 kW/174 hp], in good condition, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Dodjzqi Shspfx Ai Eswd Rental possible. = Further information = Year of manufacture: 2021 Operating hours: 1,690 Drive type: Wheeled Please contact Tobias Ebert for further information.

Condition: used, mileage: 590,792 km, power: 338 kW (459.55 HP), first registration: 06/2003, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 4,000 mm, loading space length: 5,300 mm, loading space width: 2,500 mm, Equipment: all wheel drive, crane, Vehicle data: * Manufacturer: MAN * Type: 33.464 DFALC * Front suspension: Leaf spring * Rear suspension: Air suspension * First registration: 06/02/2003 * Engine: MAN D2876 Euro 3 * Power: 338 kW / 460 hp * Displacement: 12,816 cm³ * Drive: 6x6 all-wheel drive * Wheelbase: 3825 / 1400 mm * Internal body length: approx. 5.70 m * Internal body width: 2.30 m * Transmission: 16-speed manual transmission * Permissible total weight: 33,000 kg * Technically permissible total weight: 44,000 kg * Tare weight: 15,100 kg * Mileage: approx. 590,800 km * Top speed: 85 km/h Body: * Timber transport body * Open loading area with stakes * Rear wall made of aluminum * Rear crane LOGLIFT 135Z * Crane year of manufacture: 2000 * Reach up to approx. 9 meters * Lifting capacity according to load chart: * 4 m: 2,700 kg * 5 m: 2,320 kg * 6 m: 2,080 kg * 7 m: 1,850 kg * 8 m: 1,550 kg * 9 m: 1,060 kg Equipment: * Permanent all-wheel drive * Differential locks * Engine brake / retarder * Air brake system with ABS * Air suspension system * Rotating beacon * Additional work lights * Robust forestry and construction site body Tires: * Front axle: 385/65 R22.5 * Rear axle: 315/80 R22.5 dual tires Condition: The vehicle is in a condition appropriate for its age. The engine and drive are considered to be very robust MAN technology. Crane and body are present. The vehicle is currently de-registered. Tel./WhatsApp: Dsdpfxezb T Rqj Ai Eowd

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction Dwjdpfxozgzavo Ai Ejd ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Year of construction: 2023, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (at tel. number). Intermercato TG 22 PRO-SR5 Grapple Saw / 5-Finger Grapple / incl. MS08 adapter plate / in stock & immediately available / Year of manufacture: 2023 Price: €9,890.00 net / €11,769.10 gross - Weight (kg): 156 - Cross-sectional area (m²): 0.20 - Max. working pressure (bar): 200 - Oil flow (l/min): 50 - Closing force (kN): 11.6 - Excavator class: 4-10 t - Grapple opening width (mm): 1,225 - Max. capacity (kg): 3,000 Equipment: - Incl. MS08 adapter plate - Incl. hoses, see photos We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various grapples that are immediately available! Mr. Herden (Tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. Dsdpfxeznrxxe Ai Eowd We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Westtech sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni Teleskoplader sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Intermercato range! !!Errors and prior sale excepted!! Internal ID: 3068 = Further information = Year of manufacture: 2023 New: No Unladen weight: 156 kg Part suitable for: Application forestry Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at ). Holp CutWheel / CW.099.110 / incl. MS08 mount / HARDOX / NEW / in stock & immediately available Price: 14,770.00 € net / 17,576.30 € gross - Excavators from / to: 7 – 11 t - Own weight approx.: 490 kg - Cutting diameter in cutting direction: 3 – 50 mm - Cutting diameter in sawing direction: 50 – 170 mm - Cutting width: 1,000 mm - Cutting height above ground: 100 mm - Oil flow rate: 50 – 60 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 100 – 120 rpm Advantages of the Holp CutWheel: - Clean cut of all types of wood due to adjustable counter blade - Significantly more economical operation, as less manpower and machinery are required while maintaining a high level of work safety - 3 working steps in one: cutting (3 mm to 50 mm), sawing (50 mm to 170 mm) and gathering the cut material - Working at heights up to 8.5 meters with a 10-tonne excavator and up to 10 meters with a 15-tonne excavator - Cutting wheel operates in two directions and easily processes diameters from 3 mm to 17 cm - High robustness (cutting wheel made of fine-grain steel) - Cutting and sawing direction as well as diameter can be adjusted from the cab, so that the work does not have to be interrupted. This also ensures greater work safety - Significant savings due to the fact that the CutWheel replaces a lifting platform on the excavator – in this way, the CutWheel replaces various machines and even manual labor - The robust construction also allows the material lying on the ground to be pushed together as if with a broom - Since the CutWheel does not saw, but "crushes" the wood in both cutting directions, the wood fibers are not torn open as with a conventional saw blade. This creates a smooth cut, which prevents fungal infestation - Three hydraulic connections are required: Working line, double-acting, for cutting/sawing blades 1 x leak oil line We have many other Holp products in our warehouse that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Djdjynrhujpfx Ai Eewd Errors and prior sale are subject to change! New: Yes Empty weight: 490 kg Part suitable for: Application forestry Please contact...

Condition: used, YEAR OF MANUFACTURE: 2024 HOURS: Only 470h Skid-steer quick-hitch system on the rear axle!!! Additional 150 l/min double-acting high-flow hydraulic circuit for operating milling machines, mulchers, and more on the skid-steer attachment. + Double-acting low-flow circuit in the undercarriage Operating weight: approx. 11,800 kg Engine power: 109 hp / 81 kW - Immediately available & directly from the JCB dealer! - EQUIPMENT • Comfort cabin (ROPS/FOPS) with automatic climate control, air-suspended & heated premium seat, start-stop button, • Color display with programming function for hydraulic attachments (flow rate, up to 20 attachments), rain protection roof, • Engine auto-stop function & automatic idle speed reduction • Hydrostatic, continuously variable drive >> with automatic torque adjustment 40 km/h Dedpfj Aftrfox Ai Eowd • LED work lights >> 2x on the boom, 6x on the cabin roof, front and rear • JCB EcoMAX diesel engine, 4-cylinder with SCR, DPF & DEF/AdBlue • Dozer blade on front axle • Skid-steer attachment on rear axle • 3 steering modes: crab steering, front axle steering, and all-wheel steering >> Including steering mode switch • Boom 2.00 m incl. bucket cylinder protection • 1x hammer/shear hydraulic system (up to 120 l/min) • 2x swivel bucket hydraulic system (up to 60 l/min) • 1x pressure-free return line • 1x leak oil line • 1x control circuit for hydraulic quick coupler • Electric refueling pump • Tires > DELCORA 315/70 R22.5 incl. fenders • Hose burst safety valves • Bucket cylinder protection • >> for boom, extension boom, boom arm & 2x bucket cylinders • Special permit, CE certification & TÜV for 40 km/h Optional: Rototilt R3 MS08 quick coupler incl. MS08 Price: €15,000 net Always in stock! • Forestry or grass mulchers from SEPPI M. on request • Cutting head Woodcracker CL260 on request • Sorting grapple DMS SG9050 on request • Branch/hedge shears or branch saws - We are a JCB contract partner (A-dealer) - We explicitly request that you arrange an appointment before your visit. Mr. Mihm is available for you at [email protected]. Do you need transportation? We work with various logistics companies. Unless otherwise specified: Sale of used vehicles is subject to the exclusion of any warranty or guarantee. We are an authorized Mercedes Benz service partner, JCB contract partner, IVECO contract partner, and MAGNI contract partner. Always over 700 trucks / commercial vehicles, used & new construction machines, aerial platforms, forklifts, telehandlers and more in stock! This offer is non-binding. Errors and prior sale are reserved. Rental possible = Further information = Year of manufacture: 2024 Operating hours: 470 Drive: Wheeled Please contact Tobias Ebert for more information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Dsdpfsymi Naox Ai Eewd Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.

Condition: used, mileage: 621,495 km, first registration: 04/2018, fuel type: diesel, axle configuration: 6x4, wheelbase: 46,000 mm, fuel: diesel, fuel tank capacity: 550 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro1, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Radio/multimedia system - Rotating beacon - Seat heating - Auxiliary heater - Toolbox - Windshield - Xenon lighting = Notes = Internal inquiry number: 6-110 Volvo FH540 6x4 Epsilon Q150Z Short Timber Body Vehicle is available immediately! Vehicle: Volvo FH540 6x4 Chassis height: HIGH (formerly STD); for exact height measurements, please refer to VBI/WIS (dependent on tire size). Dwjdpfx Aey T Nb Dji Eed Globetrotter safety cab, FH Wheelbase: 4600 mm Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation Euro 6 compliant emissions Diesel engine 131, 551 HP/405 kW, 2652 Nm with exhaust brake pressure regulator (including engine control for I-Shift) I-Shift AT2612F, automated 12-speed transmission, max input torque: 2,600 Nm Body: Pavic short timber stanchion body with steel front wall 8x EXTE aluminum stakes Note regarding the loading crane: The crane's rack is defective and needs repair (slewing not possible!) Crane: Epsilon Q150Z 9.6 loading crane (Double extension), lifting moment 140 kNm 4 linear levers, 2 pedals Comfort package - Headlights ON/OFF - Engine START/STOP - Engine speed adjustment + - Horn - 1 additional free switch - Seat heating via weatherproof and removable cover - Electrical box with terminal strip mounted on the base frame - Special base frame with 4-point mounting incl. 2 additional brackets - Outrigger plates extended by 170 mm - Grapple saw controls via foot pedal Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = General information Application: Forestry Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Axle configuration Front axle: Steered; suspension: leaf spring Rear axle 1: Differential lock; suspension: air suspension Rear axle 2: Differential lock; suspension: air suspension Weights Kerb weight: 15,600 kg Payload: 10,400 kg Gross vehicle weight: 26,000 kg Functional Crane: Palfinger Epsilon Q150Z 9.6, mounted at the rear of the chassis

Condition: used, Year of construction: 2019, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at…). Ressenig SATL2-400.1 – extendable forestry machine low-loader, used in excellent condition – extendable semi-trailer low-loader with 2 hydraulically steered 12-ton axle lines. Manufacturer: Ressenig (Austria), low-loader bed length: approximately 5,500 mm when retracted, approximately 8,500 mm when extended, initial registration: 05/2019, permissible total weight: 42,000 kg, fifth-wheel load: 18,000 kg, rear axle load: 24,000 kg, overall length: approximately 12,860 mm when retracted, approximately 15,860 mm when extended, unladen weight: 13,180 kg, payload: 28,820 kg, width: 2,550 mm, axles: DL-S axle lines, 12 tons, Tridec – single-wheel suspension, hydraulically sprung, hydraulically steered, remote control for steering and air suspension, tires: 245/70 R 17.5, braking system: BBA – compressed air, EBS, spring brake on both axles, low-loader bed: extendable by 3 meters from 5.5 m to 8.5 m, ramps: electro-hydraulic, other equipment: yellow rotating beacon, spare wheel, aluminum bridges for insertion into the extended low-loader bed, red/white pull-out signs for oversized transport. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.…) will be happy to assist you. You can find more information on our website. … Errors, changes, and prior sale reserved!!! = More information = Dwodpfx Ajyfrxnoi Eed Please contact Tobias Ebert for further information.

Year of construction: 2022, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CS610 compact / incl. Power-Tiltator / incl. Liebherr Likufix SW48 adapter plate / Year of manufacture: 2022 / DEMO unit / immediately available / excellent condition! Price: €42,690.00 net / €50,801.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Own weight (basic to fully equipped): 830 – 1,060 kg - Recommended hydraulic flow rate: 65 – 110 l/min - Recommended auxiliary flow rate: 40 – 60 l/min - Recommended operating pressure: 230 – 280 bar - Carrier machine service weight: 15 – 20 t - Saw box: active suspension - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. Liebherr Likufix SW48 adapter plate Optional: Electrical connector for Liebherr Likufix SW48 with installation = €1,400.00 net We stock many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55, etc.) and they are immediately available. Our warehouse has a large selection of various Westtech products immediately available! Mr. Herden (phone) will be happy to assist you. Upon request, we are also happy to provide a financing offer. We are an official sales and service partner for the following brands: - Westtech - Gierking GMT Dwsdpfx Aioyix I Ro Esd - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Internal no.: 422060 = Further information = New: No Unladen weight: 1,060 kg Part suitable for: Forestry applications Contact Marius Herden for further information.

Condition: used, High-capacity funicular mounted on a MAN 6x4 chassis truck - Maximum working length, line of 2,000 m - MAN 400 CP truck chassis - 12 m tower equipped with 6 hydraulic anchors - Possibility of mounting the funicular in the lower position (valley) or in the upper position (mountain), in other words, the funicular can pull logs from top to bottom or from bottom to top - Trolleys with 50 m cable reserve (for easy manipulation), verbally activated with remote control station + 2 additional Trolleys - Various spare parts - The machine is registered in Romania and can be driven on public roads - Good working condition. It was used very little. Purchased from the Austrian Forestry Directorate. Dwodpfjt Nf Ipex Ai Eod Installation in very good working condition. Belwo you can find our offer for VOLVO L180E. For this machine, no professional description is needed, as you can see all the details in the attached photos.

Condition: used, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 07/2026, Year of construction: 2018, Equipment: ABS, * Doll Fahrzeugbau 2-axle low-loader for forestry machinery, type T2H-0L * Air suspension * Hydraulically steered axles * Radio remote control * Overall length: 16.70 m * Low bed length: 9.50 m * Width: 2.55 m * Gross weight: 37,000 kg (technically possible: 39,000 kg) Dwsdeyxb Tvjpfx Ai Eed * Unladen weight: 10,360 kg * Possible payload: 27,640 kg * Tyres: 235/75 R17.5 * Twin tyres * Ramps * BPW axles Roadworthiness certificate valid until 01/2027

Year of construction: 2022, condition: used, For inquiries regarding this attachment, please contact Mr. Herden (via telephone). Westtech Woodcracker C450 Harvesting Grapple / incl. collection grapple / incl. rotator / incl. autospeed function / incl. power rotator / incl. OQ70/55 quick coupler adapter plate / incl. V90 electrical connector / incl. electrohydraulic switching / in stock & immediately available / Year of manufacture: 2022 / very good condition Price: €50,390.00 net / €59,964.10 gross - Cutting diameter softwood (mm): 500 - Cutting diameter hardwood (mm): 450 - Grapple opening (mm): 1,600 - Shear opening (mm): 800 - Own weight (basic – fully equipped) (kg): 1,760 – 2,350 - Recommended hydraulic flow main circuit (l/min): 80 – 160 - Recommended operating pressure (bar): 280 - Recommended hydraulic flow auxiliary circuit (l/min): 45–60 - Carrier vehicle operating weight (t): 20 – 25 Equipment: - incl. collection grapple - incl. autospeed function - incl. endless rotator - incl. power rotator - electrohydraulic switching between collection grapple and rotator - incl. OilQuick OQ70/55 adapter plate - incl. V90 electrical connector We also have a wide range of further adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a large selection of various products from Westtech that are available for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we are also pleased to provide you with a financing offer. We are an official sales and service partner for Magni telehandlers, OilQuick, Weber MT, Holp, DMS, Gierking GMT, Seppi M., Westtech, JCB construction equipment, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products for you! Subject to prior sale and errors! Internal No.: 522255 = More information = New: No Dwodpfx Aisyix N Ij Esd Part suitable for: Application in forestry Please contact Marius Herden for further details.

Year of construction: 2022, condition: used, For enquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Westtech Woodcracker CS780 / incl. Power-Tiltator / incl. OQ 70/55 adapter plate / only 93 operating hours / year of manufacture: 2022 / immediately available / excellent condition! Price: €47,890.00 net / €56,989.10 gross Features: - Power-Tiltator, infinitely rotatable - Cutting diameter: 750 mm - Grab opening width: 1,600 mm - Own weight (basic - fully equipped): 2,000 - 2,200 kg - Recommended oil flow: 120 - 170 l/min - Recommended auxiliary circuit flow: 50 - 70 l/min - Recommended operating pressure: 280 bar - Carrier vehicle operating weight: 20 - 28 t - Tilt function for cutting process: automatic - Saw box: actively sprung - Saw chain lubrication: grease Dwodpfx Aijyi R Dqe Esd Equipment: - incl. Power-Tiltator - incl. OQ 70/55 adapter plate We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We keep a large selection of various Westtech products in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide you with a tailored financing offer upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco Also, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Errors and prior sale excepted! Internal ID: 122025 = Additional information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 19 h, SCHORR tracked dumper with box, hydraulic tipping system, and ride-on platform, 500 kg load capacity, 9.2 HP engine Powerful mini dumper in top condition for sale! The machine is in very good condition and is ready for immediate use. Condition: Used, very good Operating hours: 19 hours Year of manufacture: 2025 -- Self-propelled and powerful crawler drive -- Large and high-quality tipping hopper -- Foldable ride-on platform installed as standard -- Width of only 680 mm -- Excellent value for money -- NEW & IMMEDIATELY AVAILABLE! The SCHORR RR500DHKB tracked dumper features a hydraulic tipping system and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. Thanks to its slim design (680 mm), the mini dumper can also navigate narrow paths and narrow doorways, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate even rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the tipping trough is effortless and requires little effort, even when fully loaded. With a robust trough made of thick sheet metal and removable side walls, the loading area can be enlarged as needed, allowing you to transport items such as Euro pallets or firewood. SCHORR Mini Dumper RR500DHKB - The advantages at a glance: -- Self-propelled and powerful crawler drive -- Large, high-quality tipping trough -- Foldable ride-on platform installed as standard -- Removable side panels allow for an increased loading area Technical specifications: Load capacity: 500 kg Weight: 284 kg Tipping drive: Hydraulic Engine: 9.2 HP (Loncin, 270 cc) Starter: Pull start Length: 950 mm Width: 680 mm Height: 465 mm Track width: 180 mm Pump flow rate: 9 L/min 3 forward gears 1 reverse gear Removable dumper Packaging type: Plywood crate Dwjdpfx Aewh I Avei Esd Packaging dimensions: 167 x 77 x 113 cm Our mini dumper is extremely maneuverable and is frequently used on construction sites, in agriculture and forestry, gardening and landscaping, and during renovation work. The tracked dumper is a worthwhile investment, especially when combined with one of our mini excavators. The excavated material can be easily transported into a container or similar with the mini dumper. Of course, we always have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Whether you want to have the mini dumper delivered or pick it up from us on-site in 48465 Schüttorf, we have the right solution for you. Please feel free to contact us. To make pickups and viewings as convenient as possible for you, we kindly inform you that these are only available by appointment. We at SCHORR are happy to answer any questions you may have about our mini dumpers. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your consultation.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: HAW1700-EV-Funk, rope length: 30,000 mm, rope speed: 47,000 mm/min, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks: - Pulling and positioning firewood to the wood splitter - Pulling logs onto trailers - Removing tree stumps and roots - As an attachment winch on forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes offers many possibilities for attaching the winch (threads are cut and painted. They need to be re-cut with a thread tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is mounted. A large cable pulley ensures a long service life for the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force required. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Djdpfodf Ufpjx Ai Eswd Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve, remote control, and hoses to the motor. Article number: HAW1700-EV-Funk

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required Dodpfexu I T Esx Ai Eswd - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Greentec HS 212 Branch Cutter / incl. MS08 adapter plate / NEW unit / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross - Working width: 2,100 mm - Cuts per minute: 250 - 450 - Max. branch diameter: 60 mm - Oil flow: 50 l/min - Pressure: 190 bar - Working speed: 5 km/h - Weight: 132 kg Optional: Flow divider with pressure relief valve - freely adjustable (50-90 l/min at 190 bar) = €660.00 net Description: - Clean and smooth cut of small branches and larger limbs up to max. 60 mm diameter - Sturdy frame beam made of high-strength steel - Lightweight construction - Low weight and flat housing for optimal visibility - HIGH-POWER blade drive via planetary gearbox with constant torque during direction changes - 100% linear blade movement thanks to a cast iron constant power motor - Max. 450 cuts per minute - PRO CUT blade (Made in Germany) - Fine-toothed double-cut blades (ground on both sides) increase both the surface quality and the working capacity - Special blade guide made of wear-resistant plastic ensures smooth operation and long service life - Blade fingers with branch-saving function = remaining branches are not damaged - Long service life thanks to hardened and galvanized material - Easy and quick blade change - Sliding skid prevents damage from ground contact - Minimal wear and low maintenance - High working speed up to 5 km/h - Variable mounting position of the blade bar - Required hydraulic connections: 1x DW (1x supply + 1x return) Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Greentec products that are immediately available! Mr. Herden (tel. number) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. Dwjdpozk S Tbjfx Ai Ejd We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Holp CutWheel / CW.149.140 / incl. MS10 mounting / HARDOX / NEW / in stock & immediately available Price: 19,160.00 € net / 22,800.40 € gross - Excavators from / to: 12 – 17 t - Weight approx.: 670 kg - Cutting diameter in cutting direction: 3 – 50 mm Dwjdpfeynrhzox Ai Eed - Cutting diameter in sawing direction: 50 – 200 mm - Cutting width: 1,360 mm - Cutting height above ground: 150 mm - Oil flow: 100 – 110 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 80 – 100 RPM Advantages of the Holp CutWheel: - Clean cut of all types of wood thanks to an adjustable counter blade - Significantly more economical operation, as less manpower and fewer machines are required, while maintaining a high level of work safety - 3 work steps in one: cutting (3 mm to 50 mm), sawing (50 mm to 200 mm) and gathering the cut material - Working at heights of up to 8.5 meters with a 10-ton excavator and up to 10 meters with a 15-ton excavator - Cutting wheel operates in two directions and easily processes diameters from 3 mm to 20 cm - High robustness (cutting wheel made of fine-grain steel) - Cutting and sawing direction as well as diameter can be adjusted from the cabin, so that the work does not have to be interrupted. This also ensures greater work safety - Significant savings due to the fact that the CutWheel replaces a lift on the excavator – in this way, the CutWheel replaces various machines and even manual labor - The robust construction also allows for pushing the material lying on the ground together as if with a broom - Since the CutWheel does not saw but "squeezes" the wood in both cutting directions, the wood fibers are not torn as with a conventional saw blade. This creates a smooth cut, which prevents fungal infestation - Three hydraulic connections are required: Working line, double-acting, for cutting/sawing with saw blades 1 x leak oil We have many more Holp products in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! New: Yes Unladen weight: 670 kg Part suitable for: Intended use Forestry Please contact...

Condition: used, Year of construction: 2023, operating hours: 951 h, Equipment: soot filter, Now available: Bobcat T 76 – Top features & excellent condition We are pleased to offer you the Bobcat T 76 with excellent special equipment. Condition: Used Availability: Available in the short term ----Why Zirndorfer-Maschinenpark? Official authorized dealer for Bobcat & XCMG * Family-owned business with over 45 years of experience * In-house service workshop for guaranteed quality Dwedpfx Aioz N E Sao Esd * Large selection of new and used machines Financing, leasing, or rent-to-own? No problem – we will find the right solution for you through our partner banks. Would you like to trade in your used machine? We will gladly accept your machine in trade at fair conditions. Attachments and accessories? We would be happy to offer additional attachments and suitable accessories upon request. Sale to EU or non-EU countries? We will handle the entire process for you. ----Special equipment of the machine Model year 2023 * Enclosed cab with heating * Automatic climate control * Air-suspended fabric seat * 7" touchscreen display * Reversing fan * Lift arm suspension * High Flow * Premium LED headlights * Suspended undercarriage * with forestry mulcher 195 cm ----Standard equipment of the machine Rubber tracks 450 mm * 3-point safety belt * Joystick control * Pressurized Deluxe cab * 2 Speed (two driving speeds) * Bucket parallel guidance * Reverse alarm * Power Bob-Tach quick coupler (hydraulic quick coupler) * Rear view camera * CE certification ----Trust in experience in the third generation – Zirndorfer-Maschinenpark e.?K. – Your partner for construction machinery. Contact us now and secure your individual offer. ----Legal notice The information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for errors, input errors, or data transmission errors. Subject to change.

Year of construction: 2024, condition: used, For inquiries regarding the crawler, Mr. Herden is available to assist you (by phone). Seppi M. MAX 75 HP / 75 PS / Radio-controlled crawler vehicle / Recovery winch / Seppi M. MICROFORST rc 155 forestry mulcher / Seppi M. H 5 rc 175 mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard specification and features: Dimensions*: - Overall width, undercarriage retracted: 1,650 mm - Overall width, undercarriage extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Cross/longitudinal incline: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Output: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversing fan (automatic fan cleaning) Drive: Hydraulic system for attachments: - High-flow hydraulic circuit (closed circuit) for attachments (double-acting): - Capacity: 93 l/min max. at 2,750 rpm - Pressure: 380 bar Hydraulic system services: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: 15 l/min max. at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: 154 l/min max. at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on slopes up to 55° under optimal conditions - Hydraulic adjustment of vehicle width 800 mm (2x400 mm) Dwsdpoyfrpgofx Ai Eod - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailment protection - Stability and traction thanks to robust tread and large track contact area Control: - Remote control with graphic display (machine vital data and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable feed from 0 to 100% Lifting gear: - FLOAT: Lifting gear with float position (ground pressure control) Standard equipment: - Vehicle with roll bar - LED headlights - Internal components protected by heavy-duty steel covers - Skid plate to protect the engine and hydraulics - Color: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch Optional: SEPPI M. MICROFORST rc 155 – hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a very large selection of various Seppi M. products in stock and immediately available! Mr. Herden (phone) will be glad to assist you. We are happy to provide you with a financing offer upon request. We are an official Seppi M. sales and service partner. We supply the complete Seppi M. product range! Subject to error and prior sale! Rental possible = Further information = New: Yes For more information, please contact Tobias Ebert.