Hydraulic cable winch radio 1700 kg pull

HOLZHÄUER Maschinenbau GmbH HAW1700-EV-Funk

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each Cedpfx Ajd Spf Regpspt In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: new, axle configuration: > 3 axles, first registration: 03/2023, loading space length: 16,160 mm, loading space width: 2,550 mm, loading space height: 3,770 mm, total length: 16,160 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245 / 70 R17.5, wheelbase: 1,410 mm, color: red, Year of construction: 2022, Equipment: tail-lift, Color: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year: 2022 – New/Unused Weights: King pin load: 18,500 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Max length extended: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm (+100 mm / -100 mm adjustment) Height: 3,755 mm King pin height: 1,300 mm Axles: Axle make: BPW Eco Plus Air suspension 1st axle liftable Axles 1 & 2: rigid Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 dual mounted Load index: 143/141J (146/146F) Additional features: - Radio remote-controlled loading ramps - Hydraulically operated loading ramps - Manual rear supports - Side extensions - Underrun protection - Wheel recesses - Wheel recess covers - 2.0'' king pin - Lashing rings - Stake pockets - Central lubrication - Oversize load marker boards - BPW landing gear - Toolboxes on the gooseneck = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Cpsdpfx Aouu Hgdegpet Suspension: Air suspension Front axle 1: Twin tires; lift axle; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Front axle 2: Twin tires; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functional Tail lift: Goldhofer Extendable chassis: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Financial information Price: On request For further information, please contact Stefan Schaapveld.

Condition: used, hammer drill, chisel hammer, combi hammer, Bosch hammer, cordless hammer drill -Manufacturer: Bauhaus Toolson, cordless drill type PRO-AS 18 Li-1 -incl.: charger and battery Csdpjuwgg Djfx Agpopt -Number: 4x drill drivers available -Price: per piece -Transport dimensions: 240/180/H240 mm -Total weight: 1.9 kg/piece

Condition: new, Year of construction: 2025, Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Manufacturing modern press brakes is our passion, which we would like to share with you. At the trade fairs we share our experience and attention to our bending machines, thanks to which we can keep improving our bending machines, without forgetting who we really work for. The quality of our press brakes is very important to us. Directly from the manufacturer Prod-Masz! New, complete machine from current production. Technical specifications: maximum working width: 3140 mm Cpedpfxocttgfe Agpst Bending capacity: up to 0.8 mm (steel sheet) Bending angle: max 145 degrees Bending beam thickness: 24 mm Weight: approx. 400 kg Roller shears (max. cutting capacity up to 0.8 mm / sheet steel) The machine complies with CE guidelines and has a 12-month guarantee. Rotary shears 0.8mm - plus 350 euros welt press/ crusher plus 75 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery.

Condition: new, Year of construction: 2024, The SCHORR RR500DHKAHR track dumper is specially designed for transporting heavy and bulky materials such as wood or pipes. With a payload of 500 kg and a powerful 9.2 hp single-cylinder 4-stroke petrol engine, it handles demanding tasks with ease. The robust transmission with 6 forward and 2 reverse gears ensures precise control. The powerful chain drive ensures that the dumper can also work confidently on difficult terrain, on inclines and over kerbs. The rubber tracks ensure a secure footing and offer stability on a wide variety of surfaces - from muddy fields to gravel paths. The hydraulic tipping drive of the RR500DHKAHR also offers clear advantages in the version with wooden stanchions. Even heavily loaded loads such as logs or long materials can be secured and transported effortlessly. The robust design ensures stability and a secure hold of the load, even on uneven terrain. The large hydraulic oil tank with integrated oil filter contributes to the dumper's long service life and minimizes maintenance requirements. Thanks to the powerful hydraulic system, loading and unloading is efficient and easy to handle, saving both time and physical effort. Ideal for use in the forestry sector and on construction sites, the RR500DHKAHR meets the highest standards of performance and reliability. SCHORR track dumper RR500DHKAHR - Discover the advantages: -- 9.2 HP four-stroke engine -- Self-propelled & powerful track drive -- 500kg payload -- Large and stable wooden stanchion with optimum tipping angle for efficient unloading -- Folding passenger platform as standard -- 6+2 gears Technical data: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKAHR Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight: 328kg Drive system Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5 Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. Hydraulic oil flow rate: 9L/min Basic dimensions Overall length of platform (folded): 1720mm Overall length of platform (unfolded): 1920mm Total width of stanchion (unfolded): 1250mm Total width of stanchion (folded in): 865mm Total length stanchion / platform: 965mm Cpjdpfjvfp Dwex Agpet Inner width of stanchions, top: 1175mm Stanchion inside width, bottom: 775mm Inner distance, stanchion - stanchion: 370mm Total height (handle - floor): 1050mm Overall height (stanchion - floor): 900mm Total height stanchion: 460mm Stanchion dimensions (outer dimensions) L x W x H: 965mm x 1250mm x 460mm Stake thickness: 40mmDrive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm *Further technical data available on request. The RR500DHKAHR tracked dumper is the perfect solution for transporting materials such as wood, pipes or bulk goods, especially on rough terrain. Its compact design and track drive enable maximum maneuverability, even in areas that are difficult to access.

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Cpedpfx Ajixntwjgpot Year of manufacture: 1985 reconditioned Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Condition: new, Year of construction: 2025, Prod-Masz is your competent and professional partner in the manufacture of sheet metal processing machines. Cpodpfx Aoccfh Hjgpjt Trust, honesty and reliability are not empty words for us! Model: ZGR-2140 / 1,2 Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 1.2 mm (sheet steel) - Bending angle: max. 145 degrees - Bending beam thickness: 24 mm - lifting the top beam in three positions - gas pressure springs - Passage opening: 80 mm - degree scale Angle stop rear frame for holding the sheet front depth stops - Weight: approx. 290 kg - The machine complies with the CE guidelines and has a 12-month guarantee. Price: € 1.550,00 Delivery - 2-4 days We are looking forward to your contact!

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Csdpjignt Usfx Agpjpt Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, roll diameter / mm Cpodpfx Agsuddmrjpot throat / mm workpiece height / mm Table dimensions: 615x615mm

Condition: new, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, tractors, viticulture, horticulture and many other applications. With the hydraulic winch you can make many applications easier. - Pull the firewood to the log splitter and set it up - pull logs on trailers - Pull out rootstocks and trees - As an attachment winch on back cranes and small excavators - As winch for small tractors and narrow track tractors A robust steel construction with 3-sided screwing possibility (left, right, back) with 12 threaded holes, this offers many possibilities for fastening the winch (threads are cut and painted. They have to be re-cut with a tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 ccm (standard = 400 ccm). Depending on which speed and traction you need. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Cpjdedf Ua Rspfx Agpjt Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg rope speed: 47 m/min at 60 L/min hydraulic oil Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm width front: 120 mm Width rear: 180 mm bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm Item number: HAW1700 NOTE: Figure 1 is marked with m