Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 23146001, The machine was acquired in 2024 and has seen very little use. The original price was €132,000 net. The technical data is sourced from the manufacturer's website. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Capacity up to: 150 m³/h Chipping disc: 1,450 mm (diameter) x 78 mm Disc speed: 700 rpm Number of cutting blades: 4 Number of counter blades: 4 Maximum chip length: 36 mm Feed speed: 0.7 m/s MACHINE DETAILS Control system: Greentec Control System 3.0 with touchscreen Three-point hitch: Standard Starting aid: Hydraulic Drive: PTO shaft 1000/1000E Required power: 200 – 450 HP Weight: 3,100 kg Speed: 1000 rpm Note: This machine is a special version without a hopper. Hodpfxeyg D Svo Ag Ioi

Condition: excellent (used), functionality: fully functional, empty load weight: 2,660 kg, maximum load weight: 13,340 kg, overall weight: 16,000 kg, Year of construction: 2010, Krone WP LS4-CS/Flatbed with tarp/Swap body • Manufacturer: Krone • Type: WP LS4-CS • Year of manufacture: 01/2010 • Suspension: air-air • Swap body • Length: 7.20 meters • Width: 2.45 meters • Height: 2.50 meters • Unladen weight: 2,660 kg • Payload: 13,340 kg • Gross weight: 16,000 kg Hsdpfxeymn Rie Ag Iji • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typographical mistakes excepted. - Sale according to our terms and conditions.

Condition: used, Year of construction: 2018, This machine will be sold by Euro Auctions at an unreserved auction in Manchester, UK on 10th March. For more information contact Dermot on +44 7741 906 132. Hsdpfx Ajyniybsg Isi

Condition: used, Year of construction: 2018, This machine will be sold by Euro Auctions at an unreserved auction in Manchester, UK on 10th March. For more information contact Dermot on +44 7741 906 132. Hodpfx Aoynixqjg Isi

Condition: ready for operation (used), functionality: fully functional, Equipment: trailer coupling, JOHN DEERE GATOR 6x4 Exact year of manufacture unknown! Operating hours unknown! Technical data as per information found online – not guaranteed!!! 11.6 kW 2-cylinder Kawasaki petrol engine 32 km/h Hsdpeynrtqjfx Ag Iji stepless CVT transmission 2 driven rear axles Curb weight: 463 kg Payload: 454 kg Trailer towing capacity: 635 kg Electric tipper Immediately ready for use! Original paint! As-new tyres! Sales price: €6,950 (VAT not itemizable) Low-cost delivery also available!

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 20,800 h, motor manufacturer: John Deere, gearing type: hydrostat, fuel type: diesel, maximum speed: 20 km/h, overall weight: 14,500 kg, total height: 3,600 mm, working width: 2,800 mm, Equipment: cabin, hydraulics, For sale is a Timberjack Harvester, year of manufacture 2000, with 20,800 operating hours, equipped with a TJ 754 harvester head with a long saw box. The machine is in good condition, with no play in the joints, and 80% of the hoses are new. Tracks and chains are included, as well as 2 new rims. The offer price is exclusive of 19% VAT. Hsdpfxeynmpmo Ag Isi

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 490 h, power: 13 kW (17.68 HP), motor manufacturer: John Deere, fuel type: diesel, maximum speed: 30 km/h, first registration: 11/2019, color: green, overall weight: 728 kg, front tire size: 24x10.50-10, rear tire size: 24x10.50-10, Equipment: hydraulics, lighting, trailer coupling, === MAIN SPECIFICATIONS === Year of manufacture: 2019 Operating hours or mileage: 490 h / 4,264 km Machine type: Utility vehicle (UTV) Drive type: Diesel – 2WD (rear wheel drive) Operating weight: 728 kg Payload capacity: 655 kg Dimensions (L x W x H): 2870 x 1524 x 1867 mm Top speed: approx. 30 km/h Tyres: Pneumatic Cabin: Open CE certification: Yes Emission standard: Stage IIIA Hodpjym U Rvofx Ag Ioi === HIGHLIGHTS === • Reliable 3-cylinder diesel engine • 2-speed CVT transmission (High / Low) • Hydraulic tipping cargo box • Road registered (NL license plate) • Ideal for agriculture, site logistics and grounds maintenance === CONDITION === Good working condition – fully operational. Normal wear consistent with age and usage. Inspection possible upon request. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). === DELIVERY === Crane loading available upon request. Flexible shipping solutions arranged by the logistics team of Collé Rental & Sales.

Condition: excellent (used), Year of construction: 1970, operating hours: 6,594 h, fuel type: diesel, first registration: 08/1970, color: red, WORKS PERFECTLY WITH DOCUMENTATION = Further Information = Permissible total weight: 654,926 kg Technical condition: very good Hsdpfx Aoymtgiog Isi Visual condition: very good Contact Thierry Leemans for further information.

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Hodpfx Agjfn Tu Ts Ioi Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: new, HAW4000 hydraulic winch without valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, civil engineering and many other applications. HAW4000 hydraulic attached winch can make many applications easier for you. Maximum rope capacity at 4000 kg pull 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force 90 m at 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg tensile force 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg tractive force 220 m with 5 mm plastic rope. Hjdpfefn Tviex Ag Isi Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture. ⦁ In building construction, civil engineering and road construction. ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch on backhoe cranes and excavators ⦁ As winch for tractors, work machines and grape harvesters A robust steel construction with 3-sided bolt-on option (left, right, rear) with M 16 threaded holes. This allows many possibilities for attaching the winch. (Threads are cut and painted. They must be recut before use due to rust protection). Large lubricatable pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak. ⦁ Oil flow rate up to 200 l/min short time max.240 l/min. ⦁ Maximum tractive force 4000 kg. ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color red The winch can be installed in different positions. There is an optional hydraulic brake. Depending on what pulling speeds and pulling forces you need, we can gladly offer you different options. Contact us, we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet 970 mm ⦁ Front width: 200 mm ⦁ Width rear: 300 mm ⦁ Width bearing: + 50 mm ⦁ Width motor: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak Hjdpfx Agsfn Tvhs Iei ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic mounting winch you can simplify many applications: -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendant length: 570 mm Front width: 120 mm Hjdpfx Agjdf Ufdo Ioi Rear width: 180 mm Wide storage: + 30 mm Wide engine: + 200 mm Height: 250 mm The winch is there to the

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Hsdpfedf Ud Sjx Ag Iji Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine:

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany Hjdpsupiapefx Ag Isi The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Hedpfedf Ufpjx Ag Iei Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Hedjfn Tvkjpfx Ag Ioi Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color [...]

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Hjdpsuph Uxefx Ag Isi Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Year of construction: 2020, condition: new, Professional Auger Ø 400 x 1000 mm with Hardoxschneide. Stable soil augers for our carrier or on request also for other recordings. Hjdpfxodf R Rqs Ag Ioi Item No.: MT18-EB-400-1000

Year of construction: 2020, condition: new, The root cutter is equipped with 9 hard indexable inserts that you can rotate several times at blunting. The plates have a long service life. There are the plates with 3 different chip angles to optimally handle various hard woods. You can also place the cutter to cut out flower troughs or perform other milling. Hsdpfx Asdf Sd Seg Iji Article number: MT18-WF300

Year of construction: 2022, condition: new, The operation of different devices such as Kegelspalter, Auger, root cutting, broom, Harrow, and much more is possible with the carrier. The devices are developed in Germany and manufactured. By very stable roller bearings, the forces are safely absorbed in axial and radial direction. A large pipe-strong hydraulic motor has type HMT500, with up to 1600 nm the necessary torque for powerful and efficient work. Oil volume up to 125 l / min, pressure up to 210 bar, speed 240 RPM. Hsdpfx Ajdf Sgrjg Iei Item No.: MTT500 Augers, drill Cone and other tools on request at an additional cost. Quick change shots MS 01 - MS03 - MS08 or other adapter also on request and at an additional cost.

Condition: excellent (used), functionality: unexamined, Year of construction: 1914, operating hours: 9,999,999 h, motor manufacturer: Lanz, color: green, overall weight: 12,800 kg, total height: 3,500 mm, total length: 8,500 mm, total width: 2,200 mm, working width: 2,500 mm, machine/vehicle number: 1914, This is a Lan two-cylinder compound superheated steam traction engine with Lentz valve gear, injection condensation, and step grate pre-firing, built in 1914. The engine has been completely overhauled at the Sinsheim Museum and was last newly certified by TÜV in 1998. The sale price has been appraised by a DEKRA expert at €80,000.00 and above. The price is negotiable. Regrettably, I have to sell this fine piece because the owner of the hall has sold the premises. Hedpfx Aoymy Nkjg Iji

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. Hedexlf Hwspfx Ag Ioi - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Condition: good (used), PTO shaft, drive shaft -Discount: You get a 20% discount on this item -Manufacturers: Walterscheid, Jon Deere, Granit -Spare parts: PTO shaft mounts, cross fitting, protective tubes -Partly new, partly used -Sale: only complete set -Price: complete Hjdpob A H T Tofx Ag Iji -Weight including packaging: 425 kg

Condition: used, Year of construction: 2023, operating hours: 975 h, power: 272 kW (369.82 HP), Equipment: ABS, air conditioning, cabin, front linkage, JOHN DEERE 370 | TOP | DRIVER PACKAGE PREMIUM | RTK GUIDANCE SYSTEM ----VEHICLE HISTORY * SINGLE OWNER * EXCELLENT CONDITION * VIDEO AVAILABLE ON REQUEST ----GENERAL DATA YEAR OF MANUFACTURE: 2023 OPERATING HOURS: APPROX. 975 FIRST OWNER MACHINE IN TOP CONDITION TYRES & WEIGHTS WHEEL WEIGHTS: 800 KG PER SIDE FRONT TYRES: 650/60R34 – 90% REAR TYRES: 900/60R42 – 90% STEERING & ELECTRONICS RTK GUIDANCE SYSTEM SECTION CONTROL CABIN & COMFORT ELECTRIC SEAT ADJUSTMENT ELECTRIC MIRRORS PREMIUM DRIVER PACKAGE HYDRAULICS & CONTROL UNITS 4 DOUBLE-ACTING REAR SPOOL VALVES 1 DOUBLE-ACTING FRONT SPOOL VALVE LIGHTING FULL LED PACKAGE (DRIVING AND WORK LIGHTS) FRONT & REAR HYDRAULICS / IMPLEMENTS LOWER LINK CAT 4 REAR HYDRAULIC TOP LINK FRONT MECHANICAL TOP LINK FRONT LOWER LINK WITH ADDITIONAL WEIGHT COUPLINGS & HITCH 2× K50 BALL 1× K80 BALL PTO 540 ECO 1000 PTO ---- * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 – €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 ---- CUSTOMS EXPORT DECLARATION EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAY LICENSE PLATE AND 17 - 21 DAYS AUSTRIA LICENSE PLATE EURO 1 PLEASE MAKE VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID! Hodpfx Agjym Idio Iei For sales to EU & third countries, a deposit of at least €500.00 / €1,000.00 will be required. Subject to changes, errors, and prior sale! You will find more vehicles on our website: Sales are exclusively subject to our General Terms and Conditions – see website Important Note / Important Information: Despite careful checking of all details in our offer, errors may occur. In some cases, these may be caused by transmission errors from various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it contains information for contractual negotiations. The information provided does not constitute guaranteed features.

Condition: used, Year of construction: 2018, gearing type: other, driver cabin: other, Additional features * Adjustment group for mounting plate size 3 * Adjustment group for hydraulic couplings for Aebi MT/VT * Working width 2.4 m * Hydraulic lifting and swiveling device for adaptation to mounting plates * LED lighting * Kombi 25 wear strips * Side deflectors * Splash guard * Warning flags with plastic pole Other: * Trade-in and purchase of vehicles and machines possible. Hjdpfxsymw H Tj Ag Iei * Sales price excludes transport and handover. * No liability for printing and typing errors. * Errors, changes and prior sale reserved. * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.