Used Cleaning Device for sale (16,957)

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Hnelhcjcnw U Dscqqjp Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Hjlhcjcqy I Sscqqonp Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Hnjlscdy I Rohccqqjp Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Hjlhccjcnw T Ioqqenp High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: used, Gun cleaning device MARX PWA 900 -used- Housing parts made of stainless steel, timer, fresh spray nozzle ----- Technical data ----- Hnjlou R Tfajhccqqep Dimensions (LxWxH): 670 x 510 x 370 mm, Compressed air: 6 bar

Condition: used, functionality: unexamined, Lot consisting of two IKA T25 easy clean digital dispersing units (Ultra-Turrax) for crushing, homogenizing, and dispersing in liquid media, suitable for laboratory and pilot plant use. Each unit includes an IKA dispersing tool 25 mm (S25 KD-25 G), stepless speed control from 3,000 to 25,000 rpm, internal timer, USB interface, and digital display. Technical data: - 2 units; tool IKA S25 KD-25 G (diameter 25 mm); stepless speed control from 3,000 to 25,000 rpm; internal timer, USB interface, digital display Hnolhcezmatnecqqep - Used laboratory equipment from company inventory, no functional testing performed, sold as is with no warranty. More equipment and devices from a laboratory and pilot plant liquidation are continuously being offered for sale – inquiries are welcome. Sale on behalf of the customer via the auction house Köck. Located in eastern Austria, exact address available upon request. Collection by the buyer.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Pulsed laser cleaning device with 200 watts of laser power. Significantly more effective than continuous lasers in cleaning and rust removal applications, such as those used in welding lasers. - Demo machine / (used/very good condition), approximately 70 operating hours. - Come and see and test it at our facility now. - Top-quality device at a great price from our showroom. Hnelhcjuhcd Rjcqqop - For paint stripping, rust removal, cleaning stainless steel welds, etc. - 200-watt pulsed laser / air-cooled - German-language menu - Available immediately Please also note our attractive leasing/hire-purchase offers. Sale only to commercial businesses. Machine dimensions approximately: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approximately 100 kg

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems Hnelhozl Slyjccqqsp - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Year of construction: 2020, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BV200219443, 🔥 Pyrolytic Cleaning of Screws – DEMO Unit | up to Ø70 mm | Fully Automatic | 12 months warranty Efficient and safe solution for removing polymer residues from screws used in extrusion and injection molding – no deformation, no manual cleaning required. Completely made in the European Union. _____ Key Features • Suitable for all thermoplastic materials • Max. screw diameter: Ø70 mm • Vertical process – no screw deformation • Fully automatic operation (no operator required) • Cleaning time: 3–8 hours (depending on contamination) • Process temperature: 400–500 °C • Integrated gas treatment system with water tank and pump _____ Technical Data (Type PC-70) • Max. screw diameter: 70 mm • Max. screw length: 2,450 mm • Max. working height: 3,200 mm • Total power input: 25 kW _____ Condition • DEMO unit – directly from manufacturer • Excellent condition with full 12 month factory warranty. • Available immediately Hnelhjy Id Tqjccqqep FCA BOCO price: 27 990,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Holhcoziww Ajcqqsnp Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Hnolhcoziwwiscqqop Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Vivaldi ultrasonic cleaning device for milling tools/tools Basket dimensions: 400 x 400 x 200 mm. Stainless steel container Heating with thermostat Removable basket Hnolhcszgfvzscqqsp Cleaning agent Preservative Very good condition. Used only a few times.

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Price per unit: €350 (net) Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Load capacity: 60 kg Holhcjx El A Ujcqqenp Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating pressure: 50 bar, high-pressure hose length: 1,500 mm, empty load weight: 100 kg, input voltage: 230 V, water tank capacity: 100 l, warranty duration: 12 months, We offer for sale a Pressure Washer combined with a vacuum cleaner AP 100/50M. Holhjwz Nmpsccqqenp The machine allows for the removal of residual water left on surfaces after pressure cleaning, which enables use even on floors without a drain. It is recommended for cleaning bathrooms and washrooms that need to be accessible immediately after cleaning. The AP 100/50 M is ideal for hotels and SPA centers, public facilities (stations, airports), industrial baths, restaurant kitchens, sports facilities, and many more. This is an essential machine for cleaning companies managing such premises. Condition of the machine – Very good Year of manufacture: 2014 All machines purchased from us come with a 12-month WARRANTY. Technical specification: Clean water tank: 100 l Dirty water tank: 70 l Maximum pressure: 50 bar Pump performance: 5 l/min Turbine power: 1800 W Pump power: 370 W Voltage: 230 V Weight: 100 kg

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 Single-chamber cleaning and disinfection unit (as new condition, year of manufacture: 2017) Product description (source: MMM) High-performance single-chamber cleaning and disinfection unit for the thorough processing of large quantities of medical devices, such as general surgical and MIS instruments, anesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. Ease of operation Loading baskets can be easily loaded from all four sides. Easy-Move rollers: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel – easy to clean Rubberized CoolTouch handles allow hot baskets to be handled. Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Glass doors with double glazing and tempered glass Glass panel with integrated 5.7" color touch screen on the loading side Hnjljimdtvehccqqjp Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not steam-operated) Single or double door: Double door Voltage: 380 – 400 V / 50 Hz Heating: Electric Equipment Machine VE water preheating tank (Tank 1) VE water recovery tank Sound insulation of the front of the unit (Tank 2) Sound insulation of the front of the unit Sound insulation of the side wall Exhaust gas economizer Exhaust gas backdraft preventer Conductivity measurement system Monitoring of HEPA filter Potential-free contacts Recirculation system Connection to the customer’s media supply Hot water connection Dosing system 3 suction lances 3rd dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller conveyor preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode scanner for tray recognition We assume no liability for the accuracy, completeness, and up-to-dateness of the information.

Condition: used, Year of construction: 2019, Würth Cleaning Device, Part Cleaner, used 🧰 Product features • Manufacturer: Würth • Material: Plastic • Condition: used, see pictures • Color: red • External dimensions: 122 x 75 x 102 cm • Working height: 95 cm • Year of manufacture: 2019 • Power: 1100 watts • Voltage: 230 V • Load capacity: 250 kg • Empty weight: 70 kg 💰 Price: €590,- net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Helhozavdqsccqqsnp We always have over 5,000 meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.)

Year of construction: 2014, condition: good (used), Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates essential functions such as active drying and media loading directly into the unit to save space in the practice. Melag Melatherm 10 DT Thermal Disinfector Holhcsyk Eugocqqonp The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental practices. It integrates key functions such as active drying and media loading directly into the unit to save space in the practice. The Melag MelaTherm 10 DT is a thermal disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates important functions such as active drying and media loading directly into the unit to save space in the practice. Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D) and therefore fits under a standard 60 cm worktop. Capacity: The optimized reprocessing chamber offers space for instrument sets for up to 45 patients per batch. Active drying: Reliably protects instruments from corrosion and recontamination thanks to integrated external and internal drying. Integrated process media: Cleaner, neutralizer, and rinse aid are stored in a space-saving drawer directly within the unit. Manufacturer: Melag Type: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Image processing control unit, camera control Hnsljxvp S Ejhccqqjp -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw Hslhjk Radisccqqsnp include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Holhsv S Diheccqqenp After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: as good as new (ex-display), Year of construction: 2025, The brush washbasin LCT bio.x C100 is the proven classic in a new design and with optimized equipment technology. It impresses with its extraordinary stability and load-bearing capacity. The spacious work surface enables barrier-free and comfortable working. - stable construction - particularly low-maintenance - high load capacity - Energy-saving mode for downtimes such as nights or weekends - A flexible articulated hose allows easy rinsing of the parts - Optimum cleaning performance by heating the cleaner to 41 °C The workpieces are rinsed off through a nozzle. With With the help of the flexible articulated hose, the nozzle in the desired position can be fixed. The cleaning brush supports the cleaning strongly dirty parts. The large cleaning surface enables effective cleaning To work. High carrying capacity of the washer due to stable device construction. Device is made of plastic and is therefore very stable and corrosion-free. Easy to transport using a lift truck. Multi-stage filter system, consisting of coarse screen, fine screen and magnet. In addition, a washable filter bag holds (fineness: 100 μm) finest impurities back before they get into the bathroom. A functional control with soft-touch control panel guaranteed by choosing the energy saving mode Energy savings of approx. 50%. All electronic components of the device are in one compact technical unit. Our LCT bio.x C100 can be used with the following label-free cleaners be driven LCT BioLiquid Holhsh S Undeccqqjnp LCT Bio Liquid Special LCT Bio Liquid Power: LCT coconut cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner low-foaming

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Holhjq Rd R Doccqqonp Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, workpiece weight (max.): 15 kg, inner dimension height: 95 mm, inner dimension length: 260 mm, negative pressure: 10,000 Pa, No minimum price – guaranteed sale to the highest bidder! Cleaning machine as a single-chamber flood system operating under full vacuum. The machine will undergo a complete overhaul in 2026 with an estimated value of €16,800 and is in very good condition. The original new price of the machine was €104,000. TECHNICAL DETAILS Hjlhccozh Eiqoqqjnp Cleaning medium: halogen-free hydrocarbon or modified alcohol Cleaning basket dimensions: 260 x 160 x 95 mm Batch weight max.: 15 kg MACHINE DETAILS Overall length: 1,260 mm Overall width: 1,110 mm Overall height: 2,600 mm Total weight: 1,600 kg EQUIPMENT CE marking in roll-on/roll-off standard version Complies with the 31st German Federal Immission Control Ordinance (BImSchV) (as of August 21, 2011) Complies with the Swiss Air Pollution Control Ordinance (as of March 1, 1998) Complies with the Austrian VAV Ordinance (as of July 26, 2022) Complies with the EU VOC Directive 199/13

Condition: used, Year of construction: 2005, functionality: fully functional, fuel type: electric, empty load weight: 172 kg, total length: 1,530 mm, construction height: 1,050 mm, drive type: Elektro, construction width: 1,100 mm, Sweeper machine Condition: Ready for use and fully functional Technical condition: normal Hjlhccszmbi Roqqonp Description: In addition to this Hako model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this B755. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and special construction for forklifts from 8 tons upwards. We will also gladly offer consignment sales for your vehicle. Working width: 750 mm; Effective sweeping width: 1100 mm

Condition: excellent (used), Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 0.63/2.20 Hnjlhozlxb Ieccqqep -Item No.: 49169244 -Individual components: see photos -Cardboard dimensions: 285/220/60 mm -Weight: 1.1 kg