Used Steam Cleaning Systems for sale (39,976)

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean Nwsdpfjxzh E Uox Af Ijb The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Njdpfexv Aaisx Af Iswb Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) - External Module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) Nedpfxswum Svo Af Ijwb - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop

Condition: good (used), Line was filling jars with chutneys and fruit sauces. Lovely condition. Nwedpfx Aetux H Ijf Isb

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a fully automatic hydrocarbon cleaning system Amsonic EGAclean 4100 in used, extremely well-maintained condition. The system is designed for reliable and reproducible parts cleaning (including ultrasonic, filtration, vapor phase, and vacuum drying) and is ideal for precision and series component cleaning. 1) Identification / Nameplate Manufacturer: Amsonic AG (Precision Cleaning) System type / model: EGAclean 4100 Equipment No.: 980 000 5161 Year of manufacture: 2007 CE marking: available 2) Process / Technology (EGAclean – Hydrocarbon) Medium / Solvent class: A3 (hydrocarbon) Solvent: ZESTRON VD Typical process steps: • Immersion cleaning in hot solvent (above flash point) with ultrasonic and microfiltration • Vapor phase Nodpsycl Tmefx Af Ijwb • Vacuum drying Practical advantage: consistent cleaning quality due to continuous distillation, highly compact design. 3) Technical Core Data (from nameplate) Electrical connection: 400 V / 3/N + PE / 50 Hz Power consumption: 32 kW Current circulation: 47 A Minimum fuse protection: 63 A Heating power: 19.5 kW (28 A) Max. bath temperature: 85 °C Max. cleaning chamber temperature: 85 °C Max. compressed air: 6…10 bar Ultrasonic frequency: 20 kHz Ultrasonic power: 1 × 1.0 kW Destillation pressure: 60…100 mbar (abs) Boiler pressure: 5 bar Boiler temperature: 150 °C Max. filling: approx. 426 l Max. batch / basket weight: 50 kg Flash point: min. 56 °C 4) Key Performance / Operating Data (from documentation) Productivity: approx. 200–300 kg/h Basket dimensions: 520 × 320 × 200 mm Cleaning costs: 0.041 (unit according to template: “…/kg”) Annual consumption: approx. 200 liters isoparaffin Distillation residues are incinerated in cement plants Air emissions: 1.7 kg VOC per year Annual energy consumption: approx. 17,000 kWh 5) Operating Hours / Maintenance / Condition Operating hours (readout): approx. 86,037 h (see photo, display with decimal point) Condition: used, extremely well-maintained Next maintenance: 2026

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For consistently clean components in continuous operation Continuous flow cleaning system made of stainless steel with oil separator for uninterrupted material throughput. The parts to be cleaned pass continuously—or, if needed, in cycles—through successive treatment zones. Cleaning is carried out by passing the parts by fixed nozzle systems. Designed for components with dimensions approx. 400 x 100 x 200 mm Wire link conveyor transports the components lying flat or standing upright through the cleaning system • Surrounding nozzle frame – the offset nozzle arrangement enables all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle and frame adjustment to suit component • Customizable useful dimensions, load capacity, and pump output Process steps occur in successive treatment zones: • Spray cleaning – series connection of various wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank capacities: Washing tank: 800 liters Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pumps: 3.0 kW Rinsing tank pumps: 2.2 kW Washing pump pressure: 3 bar Nwsdpfoxcun Ejx Af Ijb Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine includes stainless steel drip trays for leakage protection—these are included in the price and will be delivered with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Nedpfoq Rd R Djx Af Iswb Connected load 10.2 KW

Condition: used, Year of construction: 2018, Technical specifications: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50 Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Nwjdpjwf U Rusfx Af Iob Wash tank: 900 l Rinse tank: 900 l Oil separator: 200 l

Condition: used, Control for cleaning system Nwodpfeb Uhtwex Af Ieb -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg

Year of construction: 2017, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Max. batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit Nsdpfxox Sv Uzj Af Iewb • High cleaning quality with minimal solvent consumption • Ideal for precision engineering and machining businesses The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale.

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece At an absolute special price Location: From stock Bitburg Nodpscdy Ndefx Af Iewb

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard Nsdpfxjdqzhhj Af Iswb 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h Njdscdy I Tepfx Af Ijwb nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Nwodpfx Aohkzt Nsf Isb Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100 % air recirculation Residual dust content < 0.1 mg/m³ Low noise emission Longer filter life Njdpfx Afshkzu As Ijwb Easy emptying Supplied ready to plug in With rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Intake port: 300 mm Nominal motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow 4,900 m³ / h 6,000 m³ / h Nominal volume flow: 5.089 m³ / h Negative pressure: 2.280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Cellular wheel capacity:15.816 L / h Weight:920 kg Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Nodpfxohkztts Af Iswb Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Year of construction: 1996, condition: ready for operation (used), Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment. Njdpfjx Ect Iox Af Ijwb

Condition: excellent (used), Year of construction: 2004, Hinst continuous cleaning system Continuous washing plants of the manufacturer Hinst are designed to treat serial parts in high quantities with highest cleanliness requirements at the same time. Plant no. 04.333 Year of construction 12.2004 dimensions approx. WxDxH: 3,80 x 4,30 x 3,80m incl. - 6 baskets: basket dimensions: 48,5x48,5x H26cm      - roller conveyor 2,10x52x90cm Nwsdpfsg Ipp Aox Af Ieb The continuous cleaning system has already been professionally dismantled and stored at a value of 3.500 €. these are included in the purchase price Transport can be organised by us, loading volume 2 articulated lorries. Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 47412, KKS ultrasonic cleaning system with loading/unloading station for 3 baskets Product baskets: 460x280x200(h) mm; basket load: max. 10 kg 4-chamber system, consisting of: - Loading station for 3 baskets - Tank 1: Ultrasonic cleaning (dual frequency 40/100 kHz) - Tank 2: Immersion rinse - Tank 3: DI water rinse - Tank 4: Hot air drying - Unloading station for 3 baskets Including automatic goods transport (max. 15 kg) Volume per tank: 145 liters Oil separator mounted on tank 1 for bath conditioning Plant dimensions: as per attached layout Electrical connected load: 24 kW Nwjdpjyax N Ajfx Af Ieb System is operational and in good condition. The equipment is sold without warranty/guarantee. Operating manual is available.

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system type L122 automatically working hot water chamber washing machine with basket drive by gear motor, housing of the unit made of stainless steel 1.4301, - 2 pieces 3-sided arranged nozzle systems made of stainless steel with stainless steel flat spray nozzles, - 2 pieces washing pumps made of stainless steel (Fab. Xylem/Lowara), - level control as protection against dry running - 2 pcs. suction filter as pump protection - Oil skimmer for bath maintenance - basket diameter: 1.150 mm - useful height: 700 mm - max. loading weight: 300 kg Nedpfohl Ic Rox Af Iswb - spray pressure: 2x 3 bar - tank capacity: 270 liters - heating: electrically adjustable (RT - 60°C) - connected load (electric): approx. 11,5 kW - plant dimensions (WxDxH): 1.480 x 1.540 x 2.195(h) mm

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analogue control panel and temperature control via a digital thermostat Optional functions can be added to the PRO series. We have volumes from 60 to 7,500 L to meet all requirements. Tank capacity: 110L Außenmasse:1970x670x970mm Useful dimensions grate:550x350x250mm Ultrasonic frequency: 40kHz Nodpfx Aef Hqavef Iswb Ultrasonic power:1000W

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, Used REK cleaning system Very lightly used Full vacuum technology 12 kW distiller with hot discharge technology, Basket size 530x320x200 mm The system has been technically inspected by us for functionality. We can provide training, commissioning, service work, and spare parts at short notice. Nwedpfxovyp D Te Af Ieb We have over 25 years of experience with REK systems System dimensions: 2700x2500x2600 mm

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Nedpfxof A D Nmo Af Ijwb Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: new, Year of construction: 2023, Automate your cleaning process with Superior series machines: lifting device with support grid for effortless handling of parts, filter systems for dirt separation, exclusive oil separation system (OPS) and intuitive touch panel. Standard models available from 150 L to 8000 L TECHNICAL CHARACTERISTICS Exterior dimensions of the machine 2,140 x 1,540 x 1,720mm Interior dimensions of the vat 1,300 x 794 x 670mm Useful measurements of the parts grid 1,270 x 685 x 470mm Maximum load 400kg Nsdpfx Asf E Nt Def Iswb Height of the worktop 980mm Vat capacity L 692 Power of the ultrasonic generator 4,800W Ultrasonic work frequency kHz 28 Heating element kW 12

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Nominal volume flow: 2,262 m³/h, Nedeu T Dv Ejpfx Af Iowb max. negative pressure: 2,000 Pa, Filter area: 14.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet