Used Wheel Wash System for sale (48,948)

Condition: used, functionality: fully functional, Ultrasonic washing system, make Branson Type: EVD Power: 400 V / 30 A Functionality: The vacuum chamber is loaded with workpiece carriers measuring 50 × 30 × 20 cm. The chamber is then flooded with detergent and ultrasonic cleaning takes place. After the cleaning phase, the chamber is evacuated. The next step involves steam treatment, followed by another vacuum process. Gbjdpfxew Evnze Ahnjn The result is grease-free and dry products.

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Gedpjudz D Ujfx Ahnjbn Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Year of construction: 2026, condition: new, functionality: fully functional, Genox 1,000kg/hr Rigid Plastic Washing Line designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE/PP bottles, containers etc. The system includes pre-shredder, friction washers, float sink separation tank, granulator and drying system for producing clean dry plastic granules along with a central, intelligent HMI control system. This is a standard system we offer but can be tailored to suit specific customer requirements. Individual items from our systems are available for separate purchase and integration into existing customer systems. Please contact us to discuss your project or to set up a site visit. Godsza Aw Dopfx Ahnjbn

Condition: like new (used), Year of construction: 2021, GENERAC WASH RACK MODULE D 6000 x 5700 cm Wash Area The GENERAC WASH RACK MODULE D 6000 x 5700 cm wash area is a customizable washing system, adaptable to various customer-specific configurations, including platform arrangement, maximum load capacity, wall and tank layout, as well as filter system positioning. This modular system comprises side walls (adjustable in number and length, height: 2.6 m) and ramps (number and placement selectable according to requirements) to ensure flexibility. The platform, made up of four units with removable grates for easy cleaning, provides a maximum load capacity of 15 tons. The main filtration system, with a capacity of 600 or 3000 liters, efficiently filters oil, hydrocarbons, and solids. Side tanks on each side and an optional Wash Rack Decanter (1000 liter volume, 1500 x 1500 x 2300 mm, dry weight: 400 kg) separate water from most of the sludge by settling; dosing pumps for flocculants are available upon request. The diaphragm pump (0.054 kW, 14 L/min) is activated by a water level sensor, while the booster pump (0.37 kW, 5–40 L/min) ensures flexible water flow. With a total wash bay size of 8200 x 6600 x 2850 mm, a platform of 6000 x 5700 mm (dry weight: 5600 kg), and a filter tank (600 L: 3000 x 700 x 1000 mm, 250 kg; 3000 L: 3450 x 1000 x 2120 mm, 625 kg), this wash station is ideal for demanding cleaning tasks. Manufactured by GENERAC, this system offers high quality and flexibility for industrial applications. - Customizable side walls (height: 2.6 m) and ramps according to requirements - Platform with 4 units and removable grates, load capacity: 15 tons - Main filtration system: 600 or 3000 liters for oil, hydrocarbons, solids - Side tanks: each side for flexible configuration - Diaphragm pump: 0.054 kW, 14 L/min, with water level sensor - Booster pump: 0.37 kW, 5–40 L/min - Total wash bay: 8200 x 6600 x 2850 mm, platform: 6000 x 5700 mm - Platform dry weight: 5600 kg - Filter tank (600 L): 3000 x 700 x 1000 mm, 250 kg - Filter tank (3000 L): 3450 x 1000 x 2120 mm, 625 kg - Optional: Wash Rack Decanter (1000 L, 1500 x 1500 x 2300 mm, 400 kg) - Product video available: GENERAC WASH RACK MODULE D on the GENERAC website - Areas of application: industrial cleaning, adaptable wash systems - Origin: Manufactured by GENERAC, leading manufacturer from Italy - Modular, robust, designed for custom cleaning requirements Technical Data GENERAC WASH RACK MODULE D 6000 x 5700 cm Wash Area Specification Value Diaphragm pump power 0.054 kW Diaphragm pump flow 14 L/min Booster pump power 0.37 kW Booster pump flow 5–40 L/min Wash bay dimensions (total) 8200 x 6600 x 2850 mm Wash bay dimensions (platform) 6000 x 5700 mm Wash bay dry weight 5600 kg Filter tank dimensions (600 L) 3000 x 700 x 1000 mm Filter tank dimensions (3000 L) 3450 x 1000 x 2120 mm Filter tank dry weight (600 L) 250 kg Gjdpfx Ahjydf Erenebn Filter tank dry weight (3000 L) 625 kg Decanter dimensions (optional) 1500 x 1500 x 2300 mm Decanter dry weight (optional) 400 kg Decanter capacity (optional) 1000 L Max. load capacity 15 tons Year of manufacture 2021 but new/unused

Year of construction: 2021, condition: used, Karl Roll RUK0200-130-150-04 Automated part washing system (2021) The automatic cleaning system is used exclusively for cleaning and degreasing metal parts using aqueous media. Including a VE-Water supply 3x400V/50Hz-415kW/647A total connected power 2000x1300x1600mm batch size/workpiece carrier size (L x W x H) 8.0 batches/hour max. throughput with a batch weight of 300kg (including workpiece carrier) depending on the program 450 kg (carrier + goods) max. batch weight/The weight must be evenly distributed in the basket Cleaning station volume 7550 liters approx. Station 1 6900 liters approx. Station 2 6900 liters approx. Station 3 7500 liters approx. VE water tank Heating - electric 96 kW Station 1 72 kW Station 2 72 kW Station 3 24 kW VE water tank 72 kW Hot air station 75 °C max. temperature cleaning baths 65°C max. temperature VE water tanks Process Station 1: Cleaning 1 in aqueous solution, hot Filter circuit with pressure monitoring Pressure recirculation device Fluid draining Oil separator Short stroke via trolley Re-dosing of 2 different media, Refilling directly or via pump cascade from station 2. Station 2: Rinse 1 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley Refilling directly or via pump cascade from station 3. Station 3: Rinse 2 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley DI water recirculation system, Refill directly. Gbedey Uxvtepfx Ahnon Station 4 on unloading track: Hot air drying Fans Heating coil with temperature monitoring Air supply via filter Adjustable Bypass exhaust air Condition: Very Good

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 16,000 mm, The centerpiece is a KITZINGER contino 400/2 KLT continuous container washing system, commissioned in 2019, complete with an associated reverse osmosis system. In addition, there is a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system, three modern forklifts, and packaging and securing technology. All systems are ready for operation and will be delivered ex-works from Kerpen. CLEARANCE SALE — COMPLETE PACKAGE OR INDIVIDUAL SYSTEMS Acquisition possible as a complete package or in individual lots. Lease of the KITZINGER system fully paid off — direct transfer of ownership. High-quality brand components (LENZE, EDUR, ELEKTROR, SIEMENS) — attractive resale value. Ex-works (EXW) — dismantling and transport to be organized by the buyer. Complete technical documentation and maintenance history are available. System I — KITZINGER contino 400/2 KLT container washing system Industrial continuous container washing system designed for service providers, with three active washing zones, rinsing, and a heated drying section. The entire machine, which is 16.2 m long, features a high-quality stainless steel construction with double-walled sound and thermal insulation. Manufacturer / Type: KITZINGER Maschinenbau GmbH · contino 400/2 KLT Year of manufacture / Status: 2016 · ready for operation Machine length: 16,200 mm · straight line, zones arranged one behind the other Tunnel dimensions: Width 410 mm × Height 410 mm · passage width 160–410 mm Hourly output: 200–300 containers (60/40) and 200–300 lids Connection: 400 V / 50 Hz / 140 kW (2 control cabinets) Sound emission: ≤ 85 dB(A) in accordance with BGN specifications Premium components (brand-specific — attractive for resale) ▸ LENZE drive system and frequency converters for all zones ▸ EDUR stainless steel centrifugal pumps — Zone 1: 4 kW · Zone 2: 5.5 kW · Rinsing zone: 4 kW ▸ ELEKTROR fan motors — BS2: 2 × 5 kW · BS3H: 3 × 5 kW with 15 kW additional heating ▸ SIEMENS control cabinet components in both control cabinets ▸ POLO band skimmers in washing zone 1 and washing zone 2 Three washing zones plus rinsing and drying section Infeed zone 2,000 mm: Stainless steel belts with cams · adjustable side guides · vapor hood Washing zone 1 (2,700 mm): External filter tank 1,000 l · heater 20 kW · 55 °C · 1,500 l/min 1.5 bar Washing zone 2 (2,700 mm): External filter tank 800 l · heater 30 kW · 60 °C · 1,500 l/min 2 bar Rinsing zone 3 (1,800 mm): External filter tank 400 l · heater 40 kW · 65 °C · fresh water cascade Blow-off BS2 (1,800 mm): 2 × ELEKTROR 5 kW · adjustable stainless steel air knives Godpfxezazk Nj Ahnjbn Blow-off BS3H (2,700 mm): 3 × ELEKTROR 5 kW · electric additional heating 15 kW Neutral drain zone: 500 mm with suction port Special features: Completely double-walled insulated · nozzle arms can be removed without tools System II — Filter systems / Reverse osmosis Reverse osmosis water treatment system, which significantly reduces the fresh water volume and feeds it into the closed circuit of the three washing zones. Manufacturer / Type: TopWater 401/1000 — Reverse osmosis system Year of manufacture / Status: 2022 · ready for operation Function: Water treatment, reduction of fresh water consumption In addition, a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system in an SPF cart version is available for the intensive cleaning of smaller and heavily soiled parts. Manufacturer / Type: PERKUTE · RC 122 (Clean-O-Mat SPF cart) Machine no. / Year of manufacture: S 1993 · 2008 Connection: 400 V / 50 Hz · 2

Condition: new, Main drive of a Lavatec car wash system. Gjdpfjzbtafsx Ahnebn

Condition: as good as new (ex-display), Year of construction: 2017, UNION CM10 SP TWIN Double cabin: No. 1 washing cabin, No. 2 cooling cabin equipped with No. 3 pneumatic doors. "Pass-through" type the baskets are loaded from one side and unloaded in the opposite side performing the complete cycle. The parts are loaded with a mobile trolley on the side of the washing cabin and transit inside the cooling cabin and then unloaded from the side of the cooling cabin. - Advancement between booths automatically via sideshift. - Basket rotation with safety clutch. - Possibility of loading a basket ø1060mm useful inside 980 mm. - Internal useful height 1000 mm. / Max. load capacity. 500 kg. - Washing tank 280 lt. with level restoration and stainless steel axial washing pump. Gbsdpfxjr Duq Ue Ahnon - Dosatron soap dispenser on wash tank 3-10%. - Rinsing tank 250 lt. with level restoration and axial washing pump in stainless steel. - Plant constructed of AISI 304 except for safety ground tank, external structures and external paneling (painted FE). - Safety ground tank at the base of the plant. - Total thermal insulation. - No. 2 External trolleys with drip tank + No. 2 Baskets ø1060 internal useful 980mm. - Automatic doors with safety barriers. - N°3 Bag filters (N°2 on washing 25 micron - N°1 on rinsing 10 micron). - "Union DC60" oil separator. - High-pressure blower, side air blade positioned. - Drying fan with electric heating elements. - Vapor aspirator - Emptying pump. - No. 2 Cooling Fans. (Water Chiller NOT included in the quotation). - PLC SIEMENS S7-1200 with TOUCH PANEL KTP 700 BASIC + Gate Manager for remote assistance.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demo unit. Can be viewed and tested in our showroom. Self-collection or delivery available (plus transport costs). Equipped with integrated heating. Key Features: - Professional cleaning in a closed cycle using water, blasting media, and cleaning agent - Suitable for very wide wheels (up to 360 mm width) - Narrow wheels are stabilized by a pneumatic wheel support to prevent tipping - 50°C water temperature thanks to built-in heater for improved cleaning performance - After the wash cycle, wheels are blown off with compressed air - Automatic, environmentally friendly wheel washing machine - Minimal water consumption - Time savings due to automatic washing process - Robust stainless steel casing - Programmable water heating - Double noise insulation - Washing chamber and pump sump - Compartment for drive and controls Technical Specifications: Dimensions (W x D x H): 960 x 1,220 x 1,450 mm Weight (empty): 290 kg Water volume: 300 l Gbodpfx Ahox Hgb Ujnen Blasting media capacity: 25 kg Rated output (motor and drive): 6 kW Heating capacity: up to 50°C with 4 kW Wheel diameter: 560 – 800 mm Wheel width: 135 – 360 mm Max. wheel weight: 60 kg Washing program durations: 40 / 60 / 120 seconds Heating time: 60 – 120 min Water temperature: 50°C Working media quantity: 20 kg Pump capacity: 600 L / min Electrical connection: 230/400 V, 50 Hz, 6 kW Recommended fuse: 25 A (32 A CEE plug) Min. operating pressure: 4 bar Max. operating pressure: 10 bar Noise level: 89.5 dB (A) Scope of delivery: 1x 360 HP wheel washing machine 1x Blasting media 25 kg 1x Blasting media basket 1x Rubber mat 1x Sound insulation foam 1x 30 liters washing fluid 1x Perforated PVD noise reduction filter

Condition: used, Year of construction: 2011, System with 6 washing brushes, inlet section to the washing machine, outlet section, control panel, fan cabinet. Max. Washing width: approx. 2800 mm. Length of inlet section: approx. 2500 mm. Gbodpfx Ajwpwhkehnon Length of outlet section: approx. 1400 mm. Total length: approx. 7200 mm. Max. Width: approx. 4200 mm. Max. Height to top edge of fan cabinet: approx. 3320 mm. Condition: very good, second-hand.

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, 2x degreasing, 2x rinsing, 1x residual water dryer, heating medium: natural gas, wastewater treatment unit, make Loft, burner, make Buderus, desalination unit, heat exchanger, switch and control cabinets, platform system, accessories +++ Attention: Machine is part of an online auction! +++ Godpfxjx R D Ndo Ahnobn

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Godpfsww Tziex Ahnobn

Condition: new, Year of construction: 2024, RHS spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gearmotor (possibility of managing fixed-tilt-full rotation). - Siemens PLC - possibility of creating and managing washing recipes. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Thermal insulation of the entire system. - Magnetic/electronic control of correct door closure. - Level sensor / protection for too low level. - Automatic water filling. - Vapor aspirator. Gbjdpferywyaox Ahnon Available in various configurations with: - 50-100 micron bag filter. - Drying with fan and electric heaters. - Oil separator - Emptying pump. Technical features: - Loading capacity: Single basket 670x480xh.400 mm or No. 2 450x300xh.200 mm. - Maximum allowable weight: 100 kg. - Tank volume: 400 Lt.

Condition: new, Year of construction: 2024, SM11 spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gear motor. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Electronic control of correct lid closure. - Level sensor / protection for too low level. - Tank drain with ball valve for bath change. Gbedpfxsrwmyhe Ahnsn Available in various configurations with: - Whole system thermal insulation. - 50-100 micron bag filter. - Vapor aspirator. - Drying with fan and electric heating elements. - Drying with high-pressure blower and air blade. - Oil separator. - Automatic water filling. - Emptying pump. Technical characteristics: - Basket diameter: ø1100 mm. - Internal useful height: 700 mm. - Maximum allowable weight: 250 kg. - Tank volume: 260 Lt.

Year of construction: 2015, condition: ready for operation (used), Cleaning system is fully functional. Usable dimensions: Diameter 800mm, usable height 700mm. Tank volume: 500L. Gsdpfx Ahsy Txckjnebn Options: Sludge drain Steam extraction Oil skimmer separator Magnet rod for metallic particles Volumetric chemical dosing Bag filter

Year of construction: 2000, condition: excellent (used), 1 x Parts Cleaning System Malmkvist Turbex 2000 Year of manufacture: approx. 2000 with heating 3 selectable programs: - Washing + drying - Washing - Drying Wash and dry times are adjustable. In very good condition. Technical data: Max. load weight: 20 kg Drum diameter: 400 mm Drum length: 500 mm Heating capacity: 6 kW for dry air blower as well as washing medium Temperature adjustable 0 - 80 degrees Accessories: 3 x washing baskets with three different hole diameters (1.5/2.5/5 mm) + Rack (homemade) 1 x roller conveyor with loading/unloading chute Gsdpfxoy I Nr Ee Ahnobn Operating manual + wiring diagrams The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 - Designed for washing parts in baskets - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Gedjxb Dcvjpfx Ahnsbn Please submit a purchase price offer for the machine.

Condition: like new (used), Year of construction: 2022, OPPORTUNITY!!! I am offering furniture dollies/warehouse trolleys with the following dimensions: Width x Depth x Height: Gjdpfx Ahjxylg Honjbn 2500x1150x2300 Mc-250.713 We have other trolley sizes available in upcoming offers. Triple stacking Polyamide wheels, 100 mm diameter, 4 swivel castors, 1 wheel with directional lock. Empty trolleys can be folded and nested inside each other. The Corletta can be used for in-house transportation and the storage of almost all types of goods. Thanks to the triple stacking capability, you can make full use of your warehouse height. We provide full trolley servicing. This allows us to offer a 1-year warranty on used trolleys! Delivery available throughout Europe! Your specialist in sales and servicing Corlett: KAM-KUB Logistic&Trolleys Europe

Condition: good (used), Year of construction: 2006, power: 3 kW (4.08 HP), Zentner Soltec Screen Washing Unit ST 100 Manufacturer: Zentner Systems GmbH Model: Soltec ST 100 Gsdpfx Ahjyrndgsnebn Year of manufacture: 2006 Serial number: 0505 / 06 Operating voltage: 3 × 400 V Mains frequency: 50 Hz Operating power: 3 kW Operating pressure (air): 6.0 bar Design: Enclosed stainless steel screen washing cabin Application: Automatic cleaning of screen printing frames Special features: – EX safety signs present – Integrated exhaust/ventilation system – Compact design with separate control cabinet Location: Schierling Viewing possible by appointment.

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. Gedpfxow Nxyyj Ahnebn KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Gsdpfjx Ex Nzjx Ahnsbn Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 volts Current: 90 A Connected load: 62 kW Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Gbedpfx Aehfv D Sohnon Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Gedpfx Ahsycigkonjbn

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Gbedpfotwqzlex Ahnon

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, maximum load weight: 500 kg, Cleaning system type W150 Basket diameter 1,500 mm Usable internal height 950 mm Basket load 500 kg Suitable for paint preparation and final cleaning with KS Complete stainless steel design with: - Stainless steel pump Frequency-controlled - Integration of conductivity probe in PLC - Automatic fill level replenishment - Electrical bath heating (indirect) - 2 tank system - Eco rinsing - Impulse air blow-off 3 Dimensional Godega Dqljpfx Ahnebn - Bag filter system - PLC control Siemens S7-300 with control panel - Direct drive for the wash basket - Vapor extraction - Level control - Chip/particle filter with bath cover plate - Impulse compressed air blow-off incl. sound insulation hood - PPT 100 oil separator - Pumping device/floor rinsing with tap valve - 2 pieces travel/transport system