Used Wheel Wash System for sale (49,054)

Year of construction: 2026, condition: new, MDK 3000 Brush Washing Machine with Pulp Remover The unwashed fruits are fed in at the intake. After pre-washing, they are cleaned again by an additional fresh water shower on the conveyor belt. The system is easy to clean and equipped with durable, food-grade polypropylene/acetal modular belts, featuring continuously adjustable belt speed in both directions. It comes with two swivel castors, two fixed castors, or alternatively anti-vibration feet. Minimal maintenance required. Technical specifications: - Rated capacity: 3,000 kg/h - Power requirement: 5 kW, 400 V, 16 A, three-phase - Material: Stainless steel Wnr. 1.4301, AISI 304 - Dimensions: 4300x1250x2222 mm - Discharge height: 1,370 mm - Weight: 420 kg - Washing tank water capacity: 800 L/shift - Water consumption: 100–200 L/h (depending on settings) - Water connection: ¾” quick connector - IP65 electronics - Pulp remover equipped with a robust hammer (also suitable for beetroot and quince) - Grating mill: may be electronically disengaged, enabling use of the washer for stone fruit - Fitted with 4 counter-rotating brushes for intensive washing - Rotating paddle pushes fruit towards the conveyor Fpodpfefd E R Uox Ahnoh Options: - Various sieve inserts for the grating mill for the desired fineness of fruit and vegetables - Stop ‘n’ Go system – sensitive sensor allowing the fruit washer and all types of belt presses to operate clog-free in sync - Adaptive electric valve – fresh water spray operates only when the conveyor is running - Air injection – with nozzles and a fan at the bottom of the tank for intensive washing - Air knife – removes water from fruit surface, so less water enters the final product - Recirculation pump with filter – ensures correct flow in the washing tank

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00034717-00-0010-01, No reserve price – guaranteed sale to the highest bidder! The original purchase price of the system was 93,000 EUR! Washing system with the following configuration: - Recycled water system (QU00370) - Articulated arm assembly (QU01210), clearance height 2,250 mm - SENSOFIL + (QU01410), clearance height 2,250 mm - Roof roller splash guard (QU00142) - Wheel washing unit with brush & linear technology (QU00151) - Side high-pressure system (QU00152), 2 RD, 1 overflow: 20 l/min, 85 bar - Side high-pressure system (QU00169), 8 OD, 1 overflow: 40 l/min, 50 bar - Active foam applicator (QU01500) - Special wax application unit (QU01530) Fedpeyx U D Uefx Ahnoph - Emergency stop device front left (QU00320) - Emergency stop device front right (QU00330) - Emergency stop device rear left (QU00340) - Emergency stop device rear right (QU00350) - Positioning device, LED, fixed, left (QU00388) - Positioning device, LED, fixed, right (QU00389) - Fresh water system separation, pipe separator (EZ00000) - Energy supply chain (EZ00020) - Operating terminal, VARIO-L, wall-mounted (EZ02500) - Wheel guidance rails (EZ00700) - Signs DIN A3 - Documentation, PWA, standard, DE - VDA conformity certificate, PWA, DE - Initial chemical set, PWA Electrical data: Rated voltage: 400 V Mains connection: 3/N/PE Frequency: 50 Hz Power consumption: 19.0 kW Rated current: 38 A

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Fjdpsyxz Rhofx Ahnjph

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. Fsdpfoq Nf S Rjx Ahnoph 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Fedpfx Ajy I Nugjhnsph Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. Fpjdpoxp Urwjfx Ahnoh What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Fpodpfx Ahjxpyfvenoh Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Year of construction: 2017, condition: reconditioned (used), Hello, we are offering two refurbished IBS washing machines, type MAXI 78 and MAXI 91-2. In addition, the pumps have been resealed on these machines. Inspection and collection in Einbeck. The soiled items to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the machine is switched on, and the washing solution in the tank is heated. In the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the washing tank and pump it through 6 stainless steel nozzle pipes with overlapping flat spray nozzles. The items to be cleaned are blasted from all sides with the hot solution during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the machine switches off automatically. Advantages: Fpjdpfxjzcuxxo Ahnoh 2 pumps arranged horizontally 6 three-dimensional nozzle pipes made of stainless steel robust stainless steel design additional small parts cleaning basket made of stainless steel (diameter 170 mm) rotating washing basket made of stainless steel, V-belt drive via separate motor fume extraction stainless steel sieve plate with filter basket above the washing tank low water level protection adjustable feet

Condition: like new (used), Year of construction: 2009, functionality: fully functional, temperature: 60 °C, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Fodpfx Ahjx Izwmsnsph Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: new, A mass production washing machine where parts are transported by hanger conveyor and washed by passing through tunnels. Washing is done by spraying or immersion ultrasonic dipping. Working Principle: Parts are transferred by hanging on to the hooks of the top loading conveyor belt. General process cycle: Washing - Rinsing - Optionally Ultrasonic Immersion Washing - Drying Fedpfx Aod I E Itshnoph All of the HANGWASHes are tailor-made and have lots of options depending on your needs. Please feel free ot contact with us for further information.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Fpsdpfx Aexiwc Sshnsh Advantages: - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet - Steam extraction - Stainless steel perforated plate with filter inlets above the wash tank - Water shortage safety device

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L90 automatic working hot water part washing machine with basket drive by gear motor, stainless steel washing pump (Fab. Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm - maximum loading weight: 150 kg - Spray pressure: 3 bar Fjdpfx Ahjd Ryxcjnoph - Tank volume: 105 litres - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,150 x 1,250 x 1,900h mm Kerb weight: approx. 220 kg Wash timer freely adjustable (minutes and hours) complete cleaning machine (interior and exterior cladding) made in stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bathroom cover with fine filter (2,000 micron) Intake filter as pump protection Operating hour counter Steam swath extraction incl. condensate recirculation Part washer is as good as new (test plant/technical plant) OTHER KORBDIMENSIONS ON REQUEST !!! AVAILABLE

Year of construction: 2024, condition: as good as new (ex-display), Manual cleaning is carried out with special gloves in the front part. The effectiveness of the cleaning is guaranteed by a high-pressure pump and a special spray nozzle. In these units a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1- 80 bar. Technical data: Working surface: 950 x 700mm Interior height: 450 mm Load capacity: 70 kg Optional up to 150kg Spray pressure: 1-80 bar adjustable Tank capacity: 75 litres / heating capacity 2kW Basic version: - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Upward opening flap with 2 reach-throughs and gloves - Toughened glass pane - Door opening/closing system supported by gas pressure springs - Monitoring of the door opening by means of safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Cartridge filter in stainless steel with pump (10/25/50 micron) - External mini-pneumatic oil separator Fodpfx Aef A Nq Aohnoph

Condition: used, This listing is for a Ortho Diagnostic Systems Cellwasher 2 Fjdpfx Aexzhc Hehnoph Ortho Diagnostic Systems Cellwasher 2 for automated red blood cell washing and separation in immunohematology laboratories.

Condition: good (used), Year of construction: 2000, Leutenegger (Starrag) Wash Box Fpsdpfx Ahod Ncihonoh Technical Specifications Year of Construction: 2000 Bath Volume: approx. 0.9 m³ Chemicals: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply Cable: 40 A Control Voltage: 24 V DC Maximum Temperature: 50° C Electric Heating Heating Output: 3x3.25 kW = 9.75 kW Working Pump: 3 kW Exhaust Fan: 0.37 kW Exhaust Air Flow: 400 m³/h Shipping Costs Upon Request Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior Fpedpfxjf A D Nmj Ahnjh - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: new, The scope of delivery includes: 1x Top tool, new Tool system: UKB system Trumpf / Wila / LVD with Simple Clamp Type: 15320-500 (15320X) Angle: 28° Radius: R 1.0 mm Length: 500 mm Width: 24 mm Height: 120 mm Load capacity: 800 kN/m max. Material: 42 CrMo4 Weight: ≈ 10 kg Internal reference: DE-KW23-26-03 Explanation: The tool is used in bending presses (also known as die-bending presses) for industrial sheet metal processing. The standardized tool holder, "Simple Clamp safety button," allows the operator to install and remove the segment vertically at any desired point of the press clamping mechanism. Fpjdpfx Aszcuqbshneh Note: This tool is being sold as part of a customer return (purchase date: April 2026) and is therefore offered at a reduced price. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, power capacity / kW Fpsdpjzcgmzjfx Ahnjh volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m SYSTEM ANTRIEBSTECHNIK DSF4-14.4-20R.N3-0VD Nr. 3030799

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 8,070 kg Payload: 34,930 kg GVW: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 353 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services Fsdpfx Aoy Irnvshneph • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. Fsdpfxezcf Dlj Ahnsph The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, axle configuration: 3 axles, first registration: 01/2010, suspension: air, tire size: 355/50r22.5, color: other, Year of construction: 2010, Tire size: 355/50R22.5 Axle brand: BPW Brakes: Disc brakes Fpjdpfjzc N Hdox Ahnsh Suspension: Air suspension Rear axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 2 mm Rear axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Rear axle 3: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Damage: None

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2008, loading space length: 13,860 mm, loading space width: 2,550 mm, loading space height: 4,000 mm, loading space volume: 91 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,970 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Rear doors - Air suspension - Disc brakes - Sliding roof = Notes = 2008 SYSTEM TRAILER curtain-sided semi-trailer with ABS/EBS, BPW Eco-Plus axles with disc brakes, hardwood floor, 3 supports per side with curtain holders, sliding roof, rear doors, tires 385/65-R22.5 (tread depth left: 4/8/9 mm; tread depth right: 8/7/7 mm), unladen weight: 6,700 kg, permissible total weight: 39,000 kg, Dutch registration with valid technical inspection (APK) until: 04.10.2026 = Additional Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread depth left: 25%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tire tread depth left: 50%; Tire tread depth right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tire tread depth left: 55%; Tire tread depth right: 45% Weights Unladen weight: 6,700 kg Payload: 32,300 kg GVW: 39,000 kg Functional Body brand: SYSTEM TRAILER PRS 27 Maintenance, history and condition APK (Technical Inspection): valid until 10.2026 Fpedpjzc Nqvofx Ahneh Technical condition: very good Optical condition: average Identification License plate: OK-93-NF Further information Please contact Arne Honingh for more information.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2008, loading space length: 13,860 mm, loading space width: 2,550 mm, loading space height: 4,000 mm, loading space volume: 91 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 9,010 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Rear doors - Air suspension - Disc brakes - Sliding roof = Notes = Fsdpjzc Nltjfx Ahnsph 2008 SYSTEM TRAILER curtainsider semi-trailer with ABS/EBS, BPW Eco-Plus axles with disc brakes, hardwood floor, 3 supports per side with curtain retainers, sliding roof, rear doors, tires 385/65-R22.5 (tread depth left: 5/7/7 mm; tread depth right: 9/5/8 mm), unladen weight: 6,735 kg, permissible total weight: 39,000 kg, Dutch registration with valid main inspection (APK) until: 10/23/2026 = Additional Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; tire tread depth left: 30%; tire tread depth right: 55% Rear axle 2: Max. axle load: 9,000 kg; tire tread depth left: 45%; tire tread depth right: 30% Rear axle 3: Max. axle load: 9,000 kg; tire tread depth left: 45%; tire tread depth right: 50% Weights Unladen weight: 6,735 kg Payload: 32,265 kg GVW: 39,000 kg Functional Body brand: SYSTEM TRAILER PRS 27 Maintenance, History and Condition APK (Technical Main Inspection): valid until 10/2026 Technical condition: very good Optical condition: average Identification License plate: OL-97-SK Additional Information Please contact Arne Honingh for further information.

Condition: used, REF: MM6436 Chinese 4-head filler with gating system and touch-screen controls. Valves capable of hot filling. Fjdpfeza T I Hox Ahneph Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Fpodpfx Aheyvv Trsnsh Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring