Parts washer - cleaning system

Glogar L90

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. Credshgh I Sspfx Aarof OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter Crsdpfx Aaexacdversf voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L90 Automatically operating hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Usable height: 500 mm Crsded H Slaepfx Aaref - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (ambient temperature - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and exterior cladding) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Oil skimmer for bath maintenance Operating hour counter Steam extraction with condensate return Parts washing machine is in new condition (test facility / pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: as good as new (ex-display), Year of construction: 2026, Parts cleaning machine - spray cleaning system, type L90 Automatically operated hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 780 mm Cedpfx Aod H Slcsarsrf - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar (stainless steel pump) - Tank volume: 105 liters - Heating: electrically adjustable (room temperature - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash time timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 (AISI 304) Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabinet) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Oil skimmer for bath maintenance Parts washing machine is in new condition (test system/pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter cut - 4 pneumatic clamps Codjrh Dkyjpfx Aarorf - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) Codpfx Aaouy H Nqjrerf - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 weight: 3700kg Crjdpfsgyd T Eex Aarof tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Credpfeid Szcjx Aarjf Foot pedal remote control available at an additional cost.

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Codpfxehl H Ube Aarsrf

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Turret head B-axis with 1° division Crsdpfx Aasvt A Rtjrsf Belt filter system included