Used Cell Wheel for sale (30,903)

Condition: used, Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Rotary valve: completely overhauled -Manufacturer: Rota Val, rotary valve type HD 300 with drive -Drive motor: SEW Eurodrive 0.37 kW -Speed: 1400/33 rpm Hnedshgm Dqepfx Afteu -Inlet opening: 300 x 300 mm -Outlet: 300 x 300 mm -Dimensions: 720/700 / H460 mm -Weight: 183 kg

Year of construction: 2020, condition: good (used), Rotary valve, Comav dosing valve, rotary airlock, drop-through valve Rotor diameter 400 mm Dimensions: see photos Manufacturer: Comav Hsdpfx Ajwyf Nwjftjnu Type: VSD 400 Year of manufacture: 2020 Completely stainless steel Venturi diameter: 100 mm Motor power: 0.75 kW See our other listings.

Year of construction: 1984, condition: used, Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, -Manufacturer: Waeschle, rotary valve type AKD5 / 200-AC -Drive motor: SEW Eurodrive 0.37 kW -Speed: 1400/32 rpm -Operating temp. max .: 60° C -Inlet opening: Ø 200 mm -Number: 1x rotary valve available -Price: per piece -Transport dimensions: 530/500/H495 mm Hedpfx Afegqvl Ajtsnu -Weight: 72 kg/piece

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Rotary valve: 6 blades -Drive motor: Leroy Somer 1.1 kW -Gearbox: Leroy Somer i = 1:30 -Speed: 1420/47 rpm Hjdpfshfufnox Aftenu -Inlet opening: 245 x 230 mm -Outlet: Ø 90/55 mm -Transport dimensions: 850/670 / H560 mm -Weight: 132 kg

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. Hedpfx Aeq Nf S Rjftenu 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints Hnjdourt Tljpfx Afteu This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Year of construction: 1960, condition: used, centre distance 1200 mm 550 weight of the machine ca. 2,5 t Hsdpsqwpwhefx Aftonu multifix

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Hodjt Hw D Dspfx Aftonu Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1960, functionality: limited functionality, machine/vehicle number: 410/25 1960, EX Cell O GmbH DLZ 400SL 1050 lathe. The machine is operational (but has not been used for several years). On-site testing is possible. Hnjdew H Svcopfx Afteu Shipping available (costs depend on distance in km).

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Hsdsd Nw Ttjpfx Aftjnu Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hjdpsw Eilysfx Aftjnu Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: new, Year of construction: 2025, You can call us 24/7 for bucket sand washing machines for sale. As CONSTMACH, get ready to embark on a journey to increase productivity and quality in your industry with our CKY series bucket sand washers. Our CKY-80 and CKY-100 models are designed to meet your high performance and durability requirements. Our CKY-80 model offers a sand washing capacity of 80-90 m³ per hour with 5.5 kW engine power, while our CKY-100 model provides a capacity of 110-120 m³ per hour with 7.5 kW engine power. In both models, 800x550 mm and 1.000x550 mm bucket sizes maximise functionality, while 40 buckets and 3.000 mm diameter wheels ensure superior performance even in the toughest conditions. With a 2.5 rpm rotation speed, these machines offer efficiency and energy saving and will be one of the cornerstones of your sand production facilities. Achieve high quality and optimum efficiency in your sand washing processes with the CONSTMACH CKY series. These machines offer solutions for all your sand and gravel washing needs and play a major role in speeding up your business processes and minimising your costs. These long-lasting and low-maintenance products add value to your investment while supporting your sustainable production practices. The CKY series helps you make a difference in your sand production facilities by offering you power and flexibility at every stage of your business. CKY-80 Model Technical Specifications: Hnedpfx Asuf Dgheftou Engine Power: 5.5 kW Capacity 80 - 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets 40 Ctdkj9Uxki CKY-100 Model Technical Specifications: Engine Power: 7.5 kW Capacity 110 - 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets 40

Condition: new, Year of construction: 2025, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Hnjdswck N Iopfx Aftsu

Condition: used, functionality: unexamined, spindle bore: 81 mm, turning diameter over bed slide: 650 mm, center height: 320 mm, turning length: 1,500 mm, Used lathe, see pictures. With Sony digital readout and 660mm faceplate. Year of manufacture: 1976. All technical specifications in the last picture. NOTE: The type plate states XD500, but it is actually an XD630, according to the dimensions and delivery note. Hnodpfx Aewm Rvijftsu Center distance: 1500 Trajectory length: 2500 Center height: 320mm With taper turning direction, side guide

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Hodpfx Afsxlctzjtenu Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: used, Year of construction: 2008, operating hours: 20,000 h, Serial number: VCEL220FT0000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19213 Specifications: - 2008 model - Certified expired on 11.24 - Hours: Approx. 20,000 - Weight: 34,900 kg - 259 kW - Central grease - Tires (see pictures) - Weight - EPSON Printer - Bucket - Total width: Approx. 3.4 m - Radio/CD Hnedjw Upc Njpfx Aftsu - Ready for delivery Description: Volvo L220F Wheel loader from 2008. The loader is sold with bucket, scale and printer. Ready for delivery. Hours: 20000 Own weight: 34900 Total Weight: 34900 Year controlled: no Year controlled until: 11.24 Width: 340 Kw: 259 Model: L220F

Condition: good (used), power: 432 kW (587.36 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 5,480 h, Equipment: air conditioning, Technical information Chassis type: articulated Empty weight: 53.620 kg Make of engine: C18 ACERT Top speed: 39 km/h Functional Lifting capacity: 14.500 kg Bucket capacity: 7,6 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT0988KETWX01577 Hnedpfxoxpc Dno Aftju Other information EPA Marked: yes Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Michelin Output of the auxiliary hydraulics: 580 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 12,204x4,02x4,498 Production country: US Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 1974, Please contact ATS Norway for more information Please provide reference number upon request: 20713 Specifications: 1974 model Hourly rate is uncertain Weight: 10,400 kg Tires (see pictures) Chains Okay bucket Width: approx. 2.5 m Maintenance is taken care of by owner Ready for delivery Notes: Bad battery Owner says it works, but probably needs some maintenance. Hjdpfxewq Uygs Aftenu Own weight: 10400 Total Weight: 10400 Width: 250 Model: LM 846

Condition: used, Year of construction: 1972, Serial number: 3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20509 Specifications: - 1972 model - Certified to: 05/25 - Unknown hours - 4x4 - Tires (see pictures) - Easy start - Dutch engine Hnjdpfxswphw Nj Afteu - Bucket - Articulated - Brakes have been replaced - Certified - Ready to deliver Description: We have a 1972 Vagner ST-2B Tunnel loader w/bucket for sale. Everything works as it should according to the owner. It is also certified. The brakes have been replaced and checked. Services have been performed by the owner continuously. Ready to deliver Own weight: 1 Year controlled: Yes Year controlled until: 05/25 Model: Tunnellaster

Condition: used, Year of construction: 2019, operating hours: 11,775 h, Serial number: bannhj40c97j2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20021 Specifications: - 2019 model - 11775 Hours - 290 kW - 40300 kg - 3-function - Service history - Machine width with bucket: 340 cm - Tires (see pictures) - Lever steering - Central lubrication - Scale (unknown condition) - Printer (unknown condition) - Bucket - ​​Articulated steering - 4x4 - Ready to deliver   Description: We have a 2019 Hitachi zw370-6 wheel loader w /scale, printer and bucket for sale. All services have been performed by Nasta. Regarding the scale and printer, this is in unknown condition. Hnjdpfx Afewpiarjtju Some cosmetic damage may be found. Ready to deliver. Hours: 11775 Total Weight: 40300 Width: 340 Kw: 290

Condition: used, Year of construction: 2018, operating hours: 14,270 h, Serial number: bannhj40c97j2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20022 Specifications: - 2018 model - 14270 Hours - 290 kW - 40300 kg - 3-function - Service history - Machine width with bucket: 340 cm - Tires (see pictures) - Lever steering - Central lubrication - Scale (unknown condition) - Printer (unknown condition) - Bucket - ​​Articulated steering - 4x4 - Service history - Air conditioning/ac - Lights - Radio Hodpfewpicyex Aftsnu - Ready for delivery Description: We have a 2018 Hitachi zw370-6 wheel loader w /scale, printer and bucket for sale. All services have been performed by Nasta. Regarding the scale and printer, this is in unknown condition. The alternator and belt need to be replaced on the loader. Some cosmetic damage may be found. Ready for delivery Hours: 14270 Total Weight: 40300 Width: 340 Kw: 290

Year of construction: 2019, condition: used, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19694 Description: 2019 Vama EHK2200 wheel loader broom for sale. Hnsdpfx Aevyfa Dsftsu Everything works as it should, according to the owner. It's also good with brush left on it. There are 2 water tanks with nozzles to reduce dust when sweeping. Ready for delivery

Condition: used, Year of construction: 1998, Please contact ATS Norway for more information Please provide reference number upon request: 21012 Specifications: Approx. 1998 model Hours: approx. 20,600 4 new tires Hnodjwz D A Sspfx Afteu Does not reverse Cracked windshield Engine starts and runs Climate control Description:Valmet 840 forwarder sold as a repair project.It does not reverse and moves very slowly forward. Engine starts and runs.4 new tires included.Ready for delivery. Own weight: 14000 Model: 840

Condition: used, Year of construction: 2015, operating hours: 6,410 h, Serial number: KMTPW027VFHH6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20490 Specifications: 2015 model Hours: Approx. 6410 Weight: 16,170 kg 97 kW Okay tires Central grease Gjerstad G60 quick coupler Cutter Trailer hydraulics Total width: 255 cm Hodpowph N Esfx Aftonu Leica GPS, not used recently Engcon Rototilt Sanding bucket Extra light Radio/CD Air conditioning/AC Maintenance is taken care of by owner Ready for delivery Description:Komatsu PW160-8 wheeled excavator from 2015.The machine is sold with GPS, Rototilt and bucket.Only 6410 hours have passed.Ready for delivery. Hours: 6410 Total Weight: 16170 Width: 255 Kw: 97

Condition: used, Year of construction: 2022, operating hours: 845 h, Serial number: VATZ1852AZB07xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20337 Specifications: 2022 model Hours: approximately 845 Good tires 4x4 Weight: 6000 kg 55 kW Quick release Function 30 km/h Central grease SEE bucket 2100 Liters, 2.2 m wide SEE pallet forks Length forks: 120 cm Radio/CD Air conditioning/AC Service taken at Liebherr Last performed in 500 hours Ready for delivery Description:Liebherr L506C wheel loader from 2022.The loader has only run 845 hours.Last service performed at 500 hours at Liebherr. HK-feste er L30 / Zettelmeyer 602 Z stangkobling. Sold with bucket and pallet forks. Hours: 845 Hnjdpfx Afewi Rr Notou Own weight: 6000 Total Weight: 6000 Km/t: 30 Kw: 55 Model: L506C