Used Bucket Wheel for sale (21,324)

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Knsdjzlr N Sjpfx Ap Doc

Condition: used, KOMATSU WA250-6 wheel loader with mulching and folding bucket, high-lift bucket, and automatic climate control. FOUR-WHEEL DRIVE Year of manufacture: 2011 Operating hours: 12,389 Power (kW / hp): 104 / 141 Engine displacement: 6,690 cm³ Operating weight: 11,500 kg Gross vehicle weight: 13,800 kg Load capacity: 4,100 kg Attachments: Mulching grapple bucket / Folding bucket High-lift bucket Bucket volume: 2 m³ Additional equipment: Automatic climate control Heater Reversing fan Ksdszuvqrspfx Ap Denc Rear view camera CD radio Comfort seat Automatic / torque converter transmission Central lubrication system Solid rubber tires for landfill use - German machine, always maintained / all services performed by a specialist workshop! - First owner! - Ready for operation! Errors and prior sale excepted! = Further information = Year of manufacture: 2011 Construction year: 2011 Operating hours: 12,390

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. Kedpfx Aeq Nf S Rep Donc 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, The loader rock bucket is built strong for loaders to carry and move large rocks and heavy materials easily. The properties of the loader machine is Machine Model: Hitachi ZW220 Edge Length: 2995mm Kjdpfx Aju Eyygep Denc Capacity: 3.15m3 Welded adapters-teeth

Condition: excellent (used), We now have high-quality and well-built buckets in stock, ready for immediate delivery. Available in 4.5 cubic meter sizes. Replaceable cutting edge. Contact us for more information! Johan Josef Technical data: Year of manufacture: 2018 Location: Bro, Stockholm County, Sweden Equipment: Volvo L60, Volvo L70, Volvo L90, Volvo L110, Volvo L120, Volvo L150, Volvo L180, Cat Caterpillar, or similar machines with BM attachment. Knodpfjz Rp Izox Ap Dec

Condition: excellent (used), Side tipping bucket, wheel loader bucket, earth shovel Knjdpfx Apottc S Rs Dsc -Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable -Bucket width: 1650 mm -Inner mounting width: 865 mm -Hole: bore Ø 40 / 50 mm, dimensions see photos -Holders: for ripper teeth -Dimensions: 760/1650/H770 mm -Weight: 240kg -Own weight: 480 kg

Condition: used, functionality: fully functional, power: 50 kW (67.98 HP), fuel type: diesel, empty load weight: 5,500 kg, Year of construction: 2008, operating hours: 3,000 h, drive type: Diesel, load capacity: 1,800 kg, Wheel loader Condition: Ready for use and fully functional Technical condition: good Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Kodpfjz Rtf Rjx Ap Dsnc Description: JCB 2CX Airmaster – Year of manufacture 2008 – 3000 operating hours – 3-cylinder JCB diesel engine, 50 kW – 4-wheel drive – Cabin – Heater – Lighting system – Additional hydraulics up to the fork carrier, 3rd valve – with folding bucket – Front tires 80% – Rear tires 80% – good condition – Air compressor at the rear 3rd valve, heater, full cabin.

Condition: used, Year of construction: 2010, operating hours: 965 h, 2010 | Case 721E | Used Wheel Loader | 965 hours Knodoz S T Tkjpfx Ap Dsc 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 50500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 51 inspection points 45 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general and operating condition. The number of hours shown on the display is incorrect. The machine has about 6000 hours: used as a standby snow removal machine at a ski resort. Hydraulic coupler, auxiliary line, 1 bucket in good condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41271 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2023, condition: used, 2023 | Wheel Cleaner WEXC-13 | Used Small Equipment Knodpsznfdhjfx Ap Djc 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41134 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2020, operating hours: 12,536 h, Equipment: all wheel drive, Internal vehicle number: MK300023 Available immediately at our yard in Kaufungen. For more information, please contact: Luis Lucena Viktoria Sologubova Hitachi ZW310-6 wheel loader with bucket – 28 tonnes – 12,536 operating hours. German Hitachi ZW310-6 wheel loader from 2020. Powerful machine with a 212 kW engine, all-wheel drive, enclosed operator’s cab and a large loading bucket. Technical specifications: * Vehicle number: MK300023 * Vehicle condition: Used machine * Category: Wheel loader * Manufacturer: Hitachi * Model: ZW310-6 * Year of manufacture: 05/2020 * Operating hours: 12,536 hours * Engine power: 212 kW (approx. 288 hp) * Permissible total weight: 28,000 kg * Permissible front axle load: 14,500 kg * Permissible rear axle load: 15,000 kg * Permissible trailer weight for off-road operation: 19,000 kg * CE marking * German machine Equipment: * All-wheel drive * Large loading bucket * Bucket included * Enclosed operator’s cab * Work lights Kedpfxo Aa E Emo Ap Dsnc * Exterior mirrors * Heavy-duty off-road tires * Articulated steering Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: Internal number: MK * Purchase price: €62,900.00 * Down payment: 10% * Term: 60 months * Monthly rate: €979.02 Residual value: €12,380.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We would be happy to accept your used vehicle in part exchange. Financing directly with us is possible. GOLEC COMMERCIAL VEHICLES GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, total width: 1,600 mm, Year of manufacture: 2023 Kjdpfsp T Sybjx Ap Denc Year of construction: 2023 Empty weight: 435 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good New Cangini 1600 mm sweeper collector buckets for skid steer or wheel loaders, Bobcat coupler connection

Condition: used, Year of construction: 2020, operating hours: 2,200 h, Equipment: all wheel drive, KOMATSU WA 70M 8E0 Steering wheel control Single-lever control Quick coupler Pallet forks Bucket with teeth Tires: Dunlop SP T 9 405/70 R 18, approximately 30% tread remaining Original paint Kodsz Shb Dopfx Ap Denc Lighting Road approval One owner

Condition: used, Year of construction: 2024, operating hours: 41 h, Equipment: all wheel drive, Mecalac MCL 4+ wheel loader – Year of manufacture: 2024 – Only 41 operating hours – Includes bucket & pallet fork ----Description: For sale is a like-new and compact Mecalac MCL 4+ wheel loader from the 02/2024 production year. The machine is in excellent condition and has only 41 operating hours. Thanks to the extensive accessories and quick-release coupling, the wheel loader is immediately ready for use in farm, gardening, or construction site applications. ---- Technical data & vehicle details: * Manufacturer: Mecalac * Model/Type: MCL 4+ * Year of manufacture: 02/2024 * Operating hours: 41 hrs * Power: 18.4 kW (approx. 25 hp) at 2800 rpm * Permissible total weight: 3,150 kg * Permissible axle load (front/rear): 2,100 kg / 2,100 kg * Chassis number (VIN): W09X35038RBA08100 * Color: Yellow * Axles: 2 * Tires: 31x15.5-15 (Condition: approx. 90% tread) Kedpfx Aps Aa Eqpe Denc Equipment & attachments: Quick-release coupling for quick tool changes * Pallet fork * Earthmoving bucket from AF Landtechnik (Type: ERD 1400 HV Klein) * Radio with USB port ----The machine can be viewed and tested by prior arrangement. If you are interested or have any questions, please do not hesitate to contact us! ----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ----We speak the following languages: German, English, and Russian! ----No liability for printing & typographical errors, changes, prior sales, and errors reserved! ----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the processing and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day passes / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling customs formalities We will gladly assist you in handling customs matters.

Condition: used, Year of construction: 2021, operating hours: 198 h, Equipment: all wheel drive, Komatsu WA 70M-8E0 Wheel Loader | Year of Manufacture 2021 | Only 198 Operating Hours | Top Condition Vehicle Data: * Manufacturer: Komatsu * Model/Type: WA 70M-8E0 * Category: Wheel Loader * Year of Manufacture: 2021 * Operating Hours: 198 hrs * Power: 46.2 kW (approx. 63 hp) * Color: Yellow * Permissible Total Weight: 6,000 kg * Axles: 2 * Tires: 15.5/60-18 (Tread Depth: Axle 1: 50%, Axle 2: 50%) Kodpfx Apj Aa Eq Aj Denc Equipment & Highlights: * Attachments included: Pallet forks + Original Komatsu bucket (Type: 42U-70-40110) with 0.85 m³ capacity * Comfort & Cabin: Integrated radio with USB connection for comfortable operation * Tire Condition: Approximately 50% tread remaining all around (Size 15.5/60-18) * Special Features: Emissions class "Low Noise" - ideal for use in urban or noise-sensitive areas. ----For sale is an absolutely new and well-maintained Komatsu WA 70M-8E0 wheel loader from the year 2021 with extremely low operating hours of only 198! The machine is in excellent optical and technical condition and is ready for immediate use for your next project. With a permissible total weight of 6,000 kg and a powerful 46.2 kW engine, the wheel loader offers the perfect balance between compactness and strong lifting power. The machine can be inspected and tested on our premises after prior arrangement. We look forward to your contact if you have any questions or are interested!----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us!----We speak the following languages: German, English and Russian!----No liability for printing and typesetting errors, changes, prior sales and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the processing and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and seriousness. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day licenses / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, functionality: fully functional, power: 58 kW (78.86 HP), fuel type: diesel, empty load weight: 5,700 kg, lifting height: 3,954 mm, Year of construction: 2008, operating hours: 3,591 h, total length: 5,600 mm, construction height: 2,570 mm, drive type: Diesel, load capacity: 1,600 kg, construction width: 1,570 mm, Wheel loader Condition: Ready for use and fully functional Knsdpfx Ao Aa Hbcjp Dsc Technical condition: good Front tire condition: 40 - 60% Rear tire condition: 40 - 60% Description: Yard loader - Weidemann 3070 CX80 - - - Year of manufacture 2008 - - - 3591 operating hours according to display - - - WITH NEW BUCKET - - - WITH NEW PALLET FORK - - - hydraulic quick coupler - - - 2-speed hydrostatic drive - - - operating weight 5070 kg - - - permissible total weight 6000 kg - - - overall height 2.57 m - - width 1.57 m - - length with bucket 5.60 m - - overall working height 3.95 m - - max. height of bucket pivot point 3.3 m - - - max. discharge height 2.40 m - - - 4-cylinder DEUTZ diesel engine TURBO 78 hp - - - lighting system - - - articulated steering - - - additional hydraulics to fork carrier - - - good, wide tires, approx. 50% tread - - - Weidemann adapter to Euro quick coupler can be removed - - - original paint - - Wheel loader in good condition!! Quick coupler, 3rd valve, 4th valve, work lights rear, work lights front, heater, full cab.

Condition: new, Year of construction: 2024, GG 015 EURO 5 The new Günter Grossmann GG015 compact loader. The loader Günter Grossmann GG015 (1500 kg payload) is brand new. Günter Grossmann is a high-quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very fine. The control panel is very nice and clear. The cab is soundproofed, insulated, equipped with heating, very comfortable and nicely glazed which allows working safely and comfortably. Ksdpfou Dcgyjx Ap Donc The machine has a very durable construction. The machine is equipped with a quick coupler, which allows accessories to be changed quickly without leaving the cab. Additional equipment: 4 in 1 bucket, alligator grapple, alligator grapple for trees, straw or silage. We are the largest dealer in Poland, Czech Republic and Hungary. We have all spare parts for our branded machines. GG015 loader + bucket + pallet forks + quick coupling Specification Model GG015 Engine Xinchai euro 5 Engine type: Inline, water-cooled four-stroke diesel engine Rated output: 36.8KW -( 50hp ) Rated speed: 2200 rev/min (rpm) Steering: Fully hydraulic Pressure in the system: 1.2 ~ 1.5 MPa Brake One hydraulic brake on four wheels Parking brake: manual tire 12-16.5 Wheelbase: 2100 mm Track: 1720 mm MAIN DIMENSIONS Overall length (bucket on ground): 5200 mm Overall height: 2730 mm Overall width: 1540 mm RANGE Bucket capacity: 0.7 m3 Bucket width: 1750 mm Max. breaking force: 36.8KN Capacity: 1500 kg Machine weight: 3550 kg Driving: Four-wheel drive Min. Turning radius: 4500 mm Unloading height: 2650 mm Drive system: Hydraulic transducer

Condition: used, Year of construction: 2022, operating hours: 2,343 h, Hydrema MX14G mobile excavator, year of manufacture: 2022, operating hours: 2,343 h, telescopic boom, hydraulic quick coupler Oilquick OQ65, 3 buckets (600 mm, 800 mm, 1,200 mm), 1 hydraulic trenching bucket (1,600 mm), air conditioning + heating, hammer and grapple lines, dozer blade, 20 km/h, engine: Cummins [129 kW/175 hp], weight: 15,900 kg, very good condition, ready for immediate use. We will be happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel. ) will gladly assist you. Further information can be found on our website. Errors and prior sale reserved! ZSA (additional equipment), quick coupler system, road approval, rental possible. Knsdpfsy S N H Rex Ap Djc = Further information = Drive: Wheeled Please contact Tobias Ebert for further information.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), Equipment: cabin, pallet forks, standard shovel, KINGWAY LANDER 810 – Professional Farm Loader with Kubota Engine | 1,400 kg Lifting Capacity | Hydrostatic Drive The KINGWAY LANDER 810 is a powerful and compact farm loader for professional use in agriculture, construction, gardening and landscaping, and municipal operations. Equipped with the proven Kubota V1505 4-cylinder diesel engine, hydrostatic drive, and all-wheel drive, the LANDER 810 impresses with its high performance, low fuel consumption, and maximum operator comfort. With a lifting capacity of up to 1,400 kg, a lifting height of up to 3,225 mm, and a powerful hydraulic system, the LANDER 810 is ideal for daily loading, transport, and material handling tasks. Thanks to its compact design, the machine operates safely and efficiently even in confined spaces. Standard Equipment Enclosed safety cab (ROPS/FOPS) Kubota V1505 diesel engine Hydrostatic drive All-wheel drive Differential lock 2 travel ranges Hydraulic quick coupler Euro attachment Additional hydraulics Float position Electric joystick control Adjustable steering column Suspended comfort seat Rear view camera Radio Heater Ventilation LED work lights front and rear Road lighting Lockable cab Lockable engine hood Lockable fuel tank Opening rear window Heavy-duty axles Boom lowering safety device Kjdpfx Apszpvt Ae Denc Technical Data Engine Kubota V1505 4-cylinder diesel engine Displacement: 1,498 cm³ Power: 18.5 kW (25 hp) Max. torque: 94 Nm Rated speed: 2,200 rpm Emission standard: Euro V Water-cooled Electrical System 12 V electrical system 60 Ah battery Drive System Hydrostatic drive All-wheel drive Differential lock 2 travel ranges Maximum speed: 20 km/h Inch pedal Hydraulics Hydraulic flow rate: 60 l/min Hydraulic pressure: 200 bar Hydraulic oil tank: 40 l Hydraulic pump: Bondioli & Pavesi Hydraulic circuit Float position Hydraulic quick coupler Euro attachment Performance Data Maximum lifting capacity: 1,400 kg Maximum lifting height: 2,800 mm Maximum lifting height (extended): 3,225 mm Dump height: 2,200 mm Dump angle: 80° Bucket volume: 0.26 m³ Bucket width: 1,300 mm Climbing ability: 20° Dimensions Length without bucket: 3,600 mm Length with standard bucket: 4,200 mm Width: 1,300 mm Height: 2,300 mm Wheelbase: 1,550 mm Ground clearance: 240 mm Steering angle: 40° Operating weight: 2,620 kg Tires Standard tires: 31×15.5-15 Agricultural tread pattern optional Turf tread pattern available at extra cost Industrial tread pattern available at extra cost Max. tire pressure: 3.1 bar Product Advantages Original Kubota V1505 engine Hydrostatic drive Enclosed ROPS/FOPS safety cab 1,400 kg lifting capacity Lifting height up to 3,225 mm Powerful hydraulics with 60 l/min Hydraulic quick coupler as standard Euro attachment as standard Bondioli & Pavesi hydraulic pump All-wheel drive with differential lock Compact design High maneuverability Low operating costs Comfortable joystick control Robust steel construction Ideal for daily professional use Warranty and Service 12-month manufacturer's warranty Warranty extension up to 3 years possible Our own mobile service throughout Germany Spare parts directly from our German warehouse Professional workshop and repair service

Condition: new, functionality: fully functional, mileage: 1 km, power: 44.13 kW (60.00 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: yellow, overall weight: 4,200 kg, empty load weight: 4,200 kg, operation weight: 4,200 kg, maximum load weight: 1,900 kg, lifting power: 1,900 kg/m, lifting height: 6,015 mm, tire size: 400/60-15.5, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 4x4, number of seats: 1, first registration: 01/2026, emission class: euro5, mast type: telescopic, brakes: other, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: GG1900T, Equipment: additional headlights, all wheel drive, cabin, hydraulics, Telehandler GG1900T The GG1900T telehandler from Gunter Grossmann is a powerful and versatile machine, engineered to deliver outstanding performance in demanding sectors such as construction, agriculture, and manufacturing. Built with advanced technologies and robust components, it guarantees high efficiency, reliability, and operator comfort, even on challenging terrain. Engine and Power – Reliable Performance Powered by a 61 HP (45 kW) Yuchai engine, the GG1900T delivers ample power for handling heavy loads and completing tasks quickly and efficiently. This reliable engine contributes to the machine's durability and ensures consistent performance during demanding workdays. Hydraulics and Steering – Precise Control The articulated hydraulic steering system provides precise manoeuvrability, especially in confined spaces. With a hydraulic working pressure of 16 MPa, the system offers powerful and responsive control, enhancing both safety and comfort during operation. Working Range and Lifting Capacity – Excellent Efficiency The GG1900T has a lifting capacity of 1,900 kg and a bucket capacity of 0.8 m³, ensuring efficient material handling. With a maximum lifting height of 5,680 mm, it offers versatility and precision for a wide range of applications in diverse environments. Operator Safety and Comfort – Advanced Features Designed with the operator in mind, the GG1900T features an adjustable steering wheel for ergonomic control, LED headlights for improved visibility in low-light conditions, and a reversing camera for enhanced safety during manoeuvres. Hydraulic disc brakes and a four-wheel drive system guarantee stability and control on all terrains. Technical Specifications Engine model: Yuchai Rated power: 61 HP (45 kW) Total machine weight: 4,200 kg Lifting capacity: 1,900 kg Knedpfxsytymij Ap Doc Pressure: 16 MPa Fuel tank capacity: 60 L Steering system: Articulated hydraulic steering Drive system: Four-wheel drive Hour meter: Yes Tyre size: 400/60-15.5 Work light: LED Reversing camera: Yes Steering wheel: Adjustable Mechanical joystick: Yes Brake system: Hydraulic disc brake Maximum speed: 20 km/h Wheel diameter: 920 mm Bucket capacity: 0.8 m³ Maximum lift height: 5,680 mm Mid lift height: 4,450 mm Minimum working height: 3,450 mm Overall length (with extended equipment): 6,015 mm Width: 1,900 mm Overall height (folded position): 2,620 mm Ground clearance: 400 mm Wheelbase: 3,259 mm Distance from front axle to end of equipment: 1,500 mm Distance from rear axle to end of machine: 2,359 mm Minimum height with boom lowered: 1,652 mm Base length (without equipment): 5,115 mm

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, fuel tank capacity: 55 l, color: red, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, lifting height: 3,300 mm, emission class: euro5, mast type: telescopic, shovel volume: 0.6 m³, digging bucket width: 1,670 mm, Model: FARMER 812 The FARMER 812 is the ideal machine for agricultural, construction, electrical, sanitary, repair, and service companies as well as similar sectors. We also guarantee service for the machine after the warranty period has expired. The wheel loaders are manufactured based on and under the supervision of European technicians. The equipment is built on a robust frame and is capable of operating under all conditions. The comfortable, glazed cab ensures safe and convenient operation. DIMENSIONS AND WEIGHT: Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL EQUIPMENT: Engine: Diesel, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 25 HP Battery voltage: 12 V Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brakes OPERATING PARAMETERS: Lifting height (lower edge of standard bucket): 2.54 m Maximum lifting height (upper edge of attachment): 3.0 m Maximum lifting height (upper edge of bucket): 3.3 m Dumping height (45°): 2.05 m Maximum lifting capacity (at attachment): 1.5 t Bucket width: 1.67 m Bucket volume: 0.6 m3 Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom cycle time: 7 s Fuel tank: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick-hitch system * 2x hydraulic control circuits * Reversing camera * Heating * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lights PRICE: €16,800 net €19,992 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main German office for Kingway. We offer a huge selection of machines in stock, with around 100 units always available. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also provide access to all spare parts and mobile service for our customers. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Knedow Ufixjpfx Ap Doc Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, operating hours: 1 h, Equipment: 4 in one shovel, cabin, TECHNICAL PARAMETERS: - Manufacturer: KINGWAY GERMANY - Model: 810 - Full cab with heating, ventilation, lighting, reversing camera, radio ENGINE SPECIFICATIONS: - Engine: XINCHAI - Diesel - Cylinders: 3 - Emission class: Euro 5 - Max. engine rated power: 18.2 kW / 25 hp at 2800 rpm - Max. torque in Nm: 92.6 at 1700 rpm - Cooling system: Water-cooled - Noise level: 92 Db - Voltage supply: 12V - Battery: 12V / 60 Ah DRIVE: Drive unit: Hydrostatic (PWG ITALY) Travel speed (1st gear): 0-20 km/h CAPACITIES AND PRESSURES: - Fuel tank capacity: 40 liters - Hydraulic oil tank capacity: 50 liters - Max. hydraulic oil flow rate: 42 L/min - Max. hydraulic oil pressure: 180 bar WEIGHT SPECIFICATIONS: - Operating weight: 2,300 kg - Max. tipping load: 1,600 kg - Max. lifting capacity (at the attachment point): 1000 kg DIMENSIONS: - Steering angle: 42° - Turning radius (inner/outer): 1,869 mm / 3,172 mm - Lifting height (bottom edge of standard bucket): 2,720 mm - Dumping height (with standard bucket): 1,950 mm - Dumping angle: 45° - Standard bucket: 0.5 m³ load volume - Overall length: 4,410 mm - Overall width: 1,490 mm - Overall height: 2,290 mm - Track width: 1,190 mm - Wheelbase: 1,690 mm TIRES - Standard: 31x15.5-15 agricultural profile SPECIAL FEATURES: - Very high-quality and robust construction - Euro attachment (STANDARD) - Lockable cab, tank and engine cover - Heating / ventilation - Reversing camera - Spacious comfort cab - Easy to operate - Very maneuverable !!! - Compact and versatile - Lighting system / road lighting - Hydraulic quick-release system - Third hydraulic circuit for attachments - CE certified according to the latest standards and guidelines - Sale possible WITHOUT VAT (only with VAT ID) - FINANCING possible SCOPE OF DELIVERY: - FREE delivery throughout GERMANY - One wheel loader / farm loader Farmer 810 - Incl. bucket + forks (4-in-1 bucket on request) - Hydr. quick coupler - Joystick control - 4x4 - All-wheel drive - EURO ATTACHMENT - ROAD REGISTRATION - Floating position - Operating permit for Germany You can also order the following for each of our loaders: - Tow hitch, - Additional weights, - Any possible accessories such as push blade, crocodile jaws, snow plow, volume buckets, sweeper, grapple bucket. PRICE: Net price: €18,067 Gross price: €21,500 WARRANTY: - Each machine has a 12-month warranty, which can be extended by TWO additional years. - After the warranty period has expired, we ensure that our customers have access to all spare parts. SERVICE: - We have our own mobile service team that reaches all our customers in Germany and abroad. Knsdpfx Apevz Ua Ns Dec KINGWAY is the leading and largest importer of construction and agricultural machinery in Europe. For 25 years we have been active in the European market and import and sell around 3,000 to 4,000 machines each year, which has earned us the trust of many customers. KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Here you have the opportunity to view and try out all our machines on site.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, TECHNICAL DETAILS General Information Type of machine: Electric forklift, 3-wheel Manufacturer: Linde Model: E 15 Z-02 Year of manufacture: 2006 Operating hours: 3,530 h Condition: ready for operation Own weight: 3,097 kg Lifting Performance Knedpfx Apoz Scr Dj Dsc Load capacity: 1,500 kg Lifting height: 3,750 mm Mast: Standard (2W375) Fork carriage: FEM 2A Fork length: 1,100 mm Drive and Battery Drive: Electric, 24 V Battery voltage: 24 V Battery capacity: 805 Ah Battery year of manufacture: 2022 Battery charger: single-phase, 24 V, 50 A, not tested Tires Front tire: Superelastic, black, 18 × 7–8 Rear tire: Superelastic, black, 15 × 4.5–8 Front tire condition: 60 % Rear tire condition: 0 % Dimensions Overall length: 1,850 mm Overall width: 1,050 mm Overall height: 2,300 mm Structural height: 2,300 mm Sales Information Minimum price: none Sale: guaranteed to the highest bidder EQUIPMENT Side shifter 3rd valve Work light, front Roof protection Windshield Impulse control

Condition: used, Year of construction: 2022, operating hours: 47 h, 2022 | Wheel Loader 180 | Used Wheel Loader | 47 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Knsdpfx Apeznbrus Dsc 👷‍♂️ Inspected by an independent expert 49 inspection points 42 approved ✅ 6 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Low-end Chinese machine despite 47 hours the engine runs very poorly. Hydraulics are in better condition but the engine shakes a lot and smokes. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40926 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 1997, operating hours: 5,846 h, load capacity: 1,800 kg, lifting height: 4,300 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 200/50-10 Rear tire type: Superelastic Rear tire size: 15x4.5-8 Battery voltage: 48V Battery capacity: 690Ah Battery manufacturer: HSR Battery type: PzS Battery year of manufacture: 2021 Ksdps Aa Eg Dsfx Ap Denc Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and conforms to FEM4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available on request at favorable terms. We will be happy to provide you with competent and comprehensive advice on our vehicles. Side shifter, 3rd valve, front work light, full free lift, interior mirror, single pedal, 3-wheel, seat.

Condition: excellent (used), power: 55 kW (74.78 HP), gearing type: automatic, fuel type: diesel, color: yellow, axle configuration: 4x4, first registration: 07/2018, Equipment: all wheel drive, cabin, onboard computer, General information Year of construction: 2018 Model year: 2018 Operating hours: 5.014 Serial number: CAT0908MAH8803391 Technical information Number of cylinders: 3 Empty weight: 6.460 kg Functional Number of valves: 3 CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Kedpfx Aoz S H A Ssp Donc Price: On request Other information Emissions class: Stage IV Additional information Please contact Ernst van Hek for more information = Additional options and accessories = - 3rd valve - Central lubrication - Central lubrication system - Closed cabin - Immobilizer - Power steering - Rotating beacon - Spotlight front - Spotlight rear - Toolbox = Remarks = Caterpillar 908M Wheel Loader (2018) Hours: 5,014 hrs | Weight: 6,460 kg Engine: CAT C3.3B (55 kW / 74 HP) Tires: Michelin (40%) Attachments: Bucket and forks included Condition: Directly from first owner in Germany,