Filter Device

Donaldson Torit VS550

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Kfsdpoh Hxubjfx Agzoa Viewing panels

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle Kfodpjllvr Djfx Agzja - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Condition: new, The fine blasting unit type FB 1 has been specially designed for mobile use. Based on the proven "sandmaster" fine blasting system, in combination with the pneumatic control, the unit can be used extremely flexibly. Furthermore, the FB 1 fine blasting unit can be ideally combined with other blasting booths of the injector series by means of the optionally available console. As an exclusive distribution of sandmaster in the area of Baden-Württemberg we offer as IS Zubehör GmbH from our showroom the fine blasting unit type FINE-BLASTER FB 1. - sandmaster" fine blasting system - abrasive grain size Mesh 46 - 180 - Nozzle diameter 0.8 - 2.7 mm - Completely pneumatically controlled - Dimensions 210 x 350 x 310 mm (W x D x H) Ksdpfx Aodrfqtsgzefa The unit can be viewed in our showroom in Stuttgart by prior appointment and would be available immediately.

Condition: used, Year of construction: 2017, Technical details: operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Kjdevvvrpepfx Agzefa Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Year of construction: 2024, condition: new, Magnetic separator for spool transport line Kfjdpfx Ajcqvhxjgzoa Pipe magnet with 4 magnetic plates ( permanent magnet ) Hinged door for easy removal of the metal parts Tube diameter: 180 mm Available immediately Location: From stock 54634 Bitburg

Year of construction: 2010, condition: ready for operation (used), Volume flow: 1000m³/h, max. depression: 10,000Pa, motor power: 5.5kW, weight: 350kg. Kfedpfxehz Dx Se Agzja

Condition: used, Year of construction: 2014, - - - - - travels - - - - - - - - - - - travel -x axis 10.000 mm travel -y axis 1.500 mm travel -z axis 4.000 mm - - - spindle - - - - - - - - - output 62.5 kW turning speed range 262 - 4.000 U/min Torque 2.280 Nm - - - table - - - - - - - - - Size of table plate 2x (2.500 x 3.000) mm longitudinal travel 2.000 mm max. load 30.000 kg solution 0,0005 ° solution 1,8 sek. table turning speeds 1,5 U/min - - - further technical details - - - - - - control Siemens 840 Dsl numbers of positions in the tool changer 80 tool taper ISO 50 max. feed 25.000 mm/min - - - T-slots - - - - - - - - - size of T-slots (DIN 650) 28 mm T-slot - distance 225 mm Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition. Kfodpfx Agjwrztvezea For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"

Year of construction: 2025, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. Kfjdpfefyadbex Agzja The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: refurbished (used), Year of construction: 2018, operating hours: 135 h, functionality: fully functional, working width: 750 mm, area performance: 4,500 m²/h, overall weight: 330 kg, total height: 1,470 mm, total width: 810 mm, total length: 1,525 mm, water tank capacity: 95 l, battery voltage: 24 V, The Kärcher B95 RS R75 dates back to 2018 and has only logged 135 operating hours. We completely overhauled it, including installing four new maintenance-free gel batteries, which can be conveniently charged using the integrated charger. Kjdpfxewa Syvs Agzefa It features a roller brush deck, which is particularly suitable for coarse dirt particles such as wood splinters. The wood splinters are swept into a separate coarse dirt container behind the roller brushes, reducing the amount of particles that can cling to the squeegee and impair the suction performance. For efficient use of cleaning agents, the machine features a chemical dosing system that automatically adds cleaning agents to the cleaning process. As a stand-on machine, the operator has a very good overview of the machine, and the maneuverability of the Kärcher B95 RS makes it easy to clean even narrow aisles and similar areas. It is perfect for medium-sized areas such as shops, warehouses, or workshops, etc. Technical specifications: Working width: 750 mm Fresh water tank capacity: 95 liters Theoretical area performance: 4500 m²/h Weight: 330 kg

Condition: used, Year of construction: 2017, Universal Machining Center Machine type: DMG DMF 260 / 11 linear Control: CELOS Siemens 840D sl Operate Year of manufacture: 2017 TECHNICAL DATA: Travel distances: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 Kedpox Dr Urjfx Agzjfa B-axis C-axis Number of controlled axes: 5 Rapid traverse (X/Y/Z) [m/min]: 80 / 60 / 60 Spindle speed range [rpm]: 20 - 15,000 Options: - Main spindle: 15,000 rpm, 46/30kW, SK40 - Dynamic package rapid traverse x-y-z: 80/60/60m/min - X-axis linear motor - Separate electronic handwheel - 60-position chain magazine - Bed flushing via M-function - High-pressure coolant pump 40 bar - 600L coolant tank with paper band filter - Rotary table integrated into table - B-axis in head - Automatic door - Coolant gun - Spindle probe - 2 pcs. Roto clear - Scraper belt chip conveyor This offer is non-binding and subject to prior sale. Changes, errors, and interim sale expressly reserved.