For sale tana shark 440DT. 2008 machine with 7629 hours. All in good working order. Up graded engine and recently serviced. Can be seen working. For more information or to arrange a viewing please get In touch.
Overhauled Slow running robust single shaft shredder Suitable for pre-shredding a wide range of materials without massive disturbance.
Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recycling, loose or baled.
Lindner Jupiter 3200
Drive power: 2x 160 kW (ABB motors)
Sieve cassette: according to customer requirements e.g. 148 mm, 104 mm
Drive: 2 x 75 kW,
cutting chamber 1310 x 1100 mm,
Cutting unit completely overhauled in January 2023,
Knives freshly hardfaced to withstand high wear,
knife width: 72 mm,
hopper, hydr. pushers,
hydraulic unit, central lubrication system, control cabinet,
underframe / machine feet
Total weight: approx. 22 T
Large wood shredder 250cm roller 220 KW drive.
The machine is equipped with cutting crowns of 34 x 34 mm on the rotor, the blade holders are interchangeable by means of bolts.
different sieves are included with the machine 25 mm 30 mm 40 mm
The machine is complete and ready to use.
The machine is equipped with sensors that stop the machine in the event of large pieces of iron or rubble, so that it suffers little damage.
If you have any questions, call or leave a message.
For sale Tana Shark 220D Shredder. 2012 Machine with 11691 hours.. The shaft is in good condition and this machine will go straight to work. Fitted with fire suppressant and coming with its own remote control Also coming with a over-band magnet. For more information or to arrange a viewing please get in touch.
The AMIS twin-shaft shredder has a CNC-manufactured, solid grinding chamber, which is completely bolted for easy maintenance. The machine housing and the bearings are protected by wear rings and plates. The gear motors drive the two hexagonal working shafts, which can be equipped with different, exchangeable cutting discs. The two work shafts are supported in large dimensioned SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-operated permanent lubricatio...
Used chip shredder from Bürener Maschinenfabrik GmbH
Was used for chip shredding processing machine
2-shaft chip crusher BMF ZH400 D8 3kW year of construction 2016
Hopper dimensions 64cm x 37cm
substructure TBE Habermehl SB65 unit screw conveyor
Total dimensions approx: L=176cm D= 74cm H=140cm
Total weight approx. 500-600kg
There are 2 units available.price per piece
Condition see pictures
Viewing and pickup possible
Shipping Germany (without islands) 150.00 Euro net
The goods can be viewed a...
Genox BH1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc.
90kW Drive motor (110kW & 150kW options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard.
1500mm wide x 480mm diameter Rotor with 84pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available.
Hydraulic force feeding of material according to motor loading and timers.
For sale, Metso lindermann high volume heavy duty wood shredder. This machine is in excellent condition and will go straight to work. Capable of shredding 80 tonnes of wood per hour. 2003 machine and having recently undergone a refurbishment including new infeed conveyer. 400kW motor, over-band electro magnet, reject metal contamination safety system. Hammer mill in great condition. Also coming with back end conveyors and 3 way split Precision Husky Deck Screen. A must see. For more information ...
The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio.
By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system.
The shredder and the granulator are driven individually, which contributes to ...
drive motor: 4 kW
revolution per minute: 14 U/min
voltage: 380 V / Hz
weight: ca. 0,5 t
Chip Crusher - Shredder
current feed size 400 x 360mm
crushing tools 8 pieces per shaft
current drop-out size L: 350 x W: 250mm
gear motor manufacturer Vector
accessories: 2 crusher discs
For sale Lindner Micromat 2000, 42000 hours. This machine is in extremely good condition, New motor all bearings have been changed, all hydraulics including the rams are new. And the rota has also had work. The machine is ready to go to work. For more information or to arrange a viewing please get in touch
The DW 2560 pre-shredder is suitable for shredding waste wood, roots, green waste, household, bulky, industrial and other waste.
Max weight: 19.000 kg
Power: 260 kW
Rotor length: 2.500 mm
Rotor diameter: 600 mm
- Good and ready for use
- Defective hydraulic hoses replaced
- Service new
- All iols and filters exchanged
- Color refurbishment
- Without road permission
Technical data cardboard shredder:
Manufacturer Presto GmbH & Co. KG
Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021
Throughput volume 130 m³/hour
Speed 37/9 rpm
Motor power 7,5 / 2,2 kW
Electrical connection 32 A
Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H)
Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h)
Machine weight 0,45 tons
Use of the syst...
For sale Granutec Saturn Shredder. This machine has been used for vehicle car tyre shredding. Mechanically this machine is in great condition. Coming with a outfeed Conveyor and ready to work. Can be seen in operation near Manchester uk. 200hp machine.
ZXS 1500 - 2x75kW - working cross section: 1500 x 1490mm
ZXS 2000 - 2x90kW - working cross section: 1500 x 1900mm
ZXS 3000 - 2x110kW - working cross section: 1500 x 2700mm
The single shaft shredder for demanding shredding tasks. The machines are extremely robustly built and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard.
A wide range of applications for the ZXS series:
Many other materials can be shr...
Crushing line with Rapid G500-120 55kw
Granulator from Rapid company
type : G500-120
main motor 55kw
rotor diameter -500mm
loading conveyor with detector gate
big-bag station with blower and cyclone
add screen and knives
STATIONARY SHREDDER FOR SALE METSO PreShred stationary MJ4000
Number of shafts 2
Rotation speed* Up to 16-41 / 27-56 rpm
Cutting area 2420 x 2000 mm
Number of blades 6/8/9/10/12
Drive power supply unit 2x132 / 2x160 / 2x200
Capacity per hour of household waste** Up to 100 tons
Performance per hour of demolition wood** Up to 70 tons
Capacity per hour of industrial waste** Up to 35 tons
Performance per hour of bulky waste** Up to 50 tons
The M&J PreShred 4000 is designed to meet special needs. G...
Optimally suited for hollow bodies, bulky molded parts, foam material
Rotor 400 mm diameter x 500 mm width
Inlet opening at the housing flange approx. 500 x 500 mm
Open rotor with 2 knife rows
Housing hinged, with 2 stator knife rows
Drive motor 18,5 kW
Technical data paper shredder:
Type HBS 110 - 1500
Year of manufacture 1994
Drive power 110 kW
Throughput approx. 25 t/hour
Dimensions of feed hopper 1,970 x 2,000 mm
Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H)
Weight approx. 11.5 t
The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable h...
The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all...
For sale Ulster U100SB twin shaft shredder in good working order 2x37kw motors Only 2400 hours Has been used on car tyres. But good for many materials. Ready to go to work. For more information or to arrange a viewing please get in touch
The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC.
These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed.
Complete wood shredding line, shredder motor 55 kW.
It is consisting of:
- shredder type Jenz with vibrating infeed table
- 1 piece of outlet conveyor
- 1 pieces of magnet
- checked in workshop
- good working condition
ZERMA single shaft shredders of the ZPS series have universal application possibilities.
They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator.
The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs.
Single-shaft shredders from the ZPS series are designed for a wide range of applications.
Depending on the task, the shredded material can be us...
Typical of the single-shaft shredders of the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their steel-welded construction. The rotor diameter of 457 mm is also generously dimensioned. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: Drive via an oversized gearbox, reversible knives, bolted knife holders, robust external bearings, hydraulic screen basket, simple handling and technically sop...
ZWS 600 - 18,5 kW
Working cross section: 580 x 1280 mm
ZWS 850 - 22 kW
Working cross section: 860 x 1620mm
ZWS 1100 - 22 kW
Working cross section: 1140 x 1885 mm
ZWS 1400 - 45 kW
Working cross section: 1420 x 2195 mm
ZWS 1700 - 55 kW
Working cross section: 1640 x 2380 mm
ZWS 2000 - 90 kW
Working cross section: 1980 x 2380 mm
ZWS 2600 - 2x75 kW
Working cross section: 2540 x 2785 mm
ZWS 2600/600 - 2x90 kW
working cross section: 2540 x 3080 mm
Rotor diameter with 600mm!
Products made of ...
ZHS 600 - 18.5/22 kW
rotor diameter : 400 mm
Working cross section : 520 x 470 mm
ZHS 850 - 30 kW
rotor diameter : 400 mm
Working cross section : 800 x 820 mm
ZHS 1100 - 37 kW
rotor diameter: 400 mm
Working cross section: 1,080 x 1,040 mm
ZHS 1400 - 55 kW
rotor diameter: 400 mm
Working cross section: 1,400 x 1,380 mm
ZHS 1500 - 90/110 kW
Rotor diameter: 600 mm
Working cross section: 1,360 x 1,430 mm
ZHS 1700 - 75 kW
Rotor diameter: 400 mm
Working cross section: 1,640 x 1,550 mm
ZHS 2000 - ...
In every calculation of the economy and public life, waste transports are an essential factor. Here, it is less the weight but more the volume that is important. The constantly rising transport costs of this waste are increasingly posing an economic problem.
Particularly important in the sales sector is the disposal of the large quantities of polystyrene or packaging films. The VOLUMEN-ZERKLEINER ensures a volume reduction of up to 80 percent at this point. Bottles of any type and siz...
AT A GLANCE:
Sturdy steel-welded construction
Large volume hopper for material feed
Rotor made of solid steel with screwed knife holders
SPS-control for fully automatic operation
Technical data SMART 600:
infeed 600 x 840 mm
Motor 11 / 15 kW
Rotor diameter 250 mm
Rotor speed 80 - 120
13 rotor blades
Technical data SMART 600 S:
inlet 600 x 840 mm
Motor 18,5 / 22 / 30 kW
Rotor diameter 250 mm
Rotor speed 80 - 120
26 rotor blades
Machineseeker still biggest sponsors of 2nd German football league
Olympic Games: Machineseeker sponsors Team Germany
Sell now on Machineseeker! Over 250,000 inquiries per month
Photo gallery: The World's 10 biggest excavators
How to receive 100% of our e-mails
Sample sales contract for used machines in nine languages
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.