Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Fpodpfxsxx Tigo Am Esp Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: new, Year of construction: 2026, Reliable Products Arjes Compactor 300 / EVO / Olnova / Terex breaker bars Fjdpfx Amj Ah Hdbo Eepp - Hardox 500 steel - Increased productivity - Reinforced underside - Customizable dimensions

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Fpsdpfx Aozd Srdom Eop Equipment, detailed description: see documents.

Condition: used, Year of construction: 2008, machine/vehicle number: 1395, number of blades: 138, input voltage: 400 V, FOR SALE – LINDNER MICROMAT 2200 – 132 kW – 2008 For sale: an industrial shredder, the Lindner Micromat 2200, from the reputable Austrian company Lindner Recyclingtech. This machine is designed for the industrial shredding and processing of plastics and other waste materials. Technical specifications: Manufacturer: Lindner Recyclingtech Model: Micromat 2200 Year of manufacture: 2008 Power: 132 kW Application: shredding plastics / recycling Country of origin: Austria Machine condition The machine was used in an industrial setting. It is currently disconnected from the production line and prepared for sale. Due to its current condition, it is not possible to conduct an operational test or on-site machine test. Fsdpfjz Ay Dfox Am Eepp Prior to purchase, there is an opportunity to inspect the equipment after scheduling an appointment. Interested parties are requested to contact us for further information, photos, and to arrange a viewing appointment.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: E-1579, total length: 3,000 mm, total height: 2,450 mm, overall weight: 5,400 kg, total width: 1,800 mm, rotational speed (max.): 900 rpm, THM TQZ1200 Shredder – Year 2017 THM TQZ1200 shredder for recycling and material processing applications. The machine performs the shredding process using rotating accelerating elements and is designed for integration into processing and recycling plants. Key technical features: Manufacturer: THM Recycling Solutions Model: TQZ1200 Year of manufacture: 2017 Machine number: E-1579 Main motor power: 90 kW Electrical supply: 400 V / 50 Hz Impact head speed: 900 rpm Internal diameter of the working chamber: 1,200 mm Height of the working chamber: 1,210 mm Accelerating elements: chains Approximate dimensions: 3,000 × 1,800 × 2,450 mm Approximate weight: 5,400 kg Working hydraulic pressure: approx. 130 bar Hydraulic tank capacity: approx. 100 l Robust industrial machine designed for integration into processing and recycling lines. Technical documentation available. Fjdpfx Asz Erxwem Eopp For more information, photographs, or technical documentation, please contact us.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 6,000 V, overall weight: 6,200 kg, rotational speed (max.): 1,490 rpm, input current: 255 A, input frequency: 50 Hz, This high-voltage motor was kept in stock after being overhauled but was never installed. In the meantime, it is no longer needed, as a more powerful type of motor has been installed in this system. Fsdpj Ahngwefx Am Eepp

Condition: used, total length: 1,800 mm, total height: 2,050 mm, total width: 1,400 mm, Colour: Grey Empty weight: 1.000 kg Fpedpfxexa D Iie Am Eep - Main motor power [kW]: 11 - Opening width [mm]: 950 - Opening length [mm]: 700 - Transport dimensions: 1800mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 1000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, operating hours: 1,800 h, overall weight: 3,000 kg, rotor diameter: 360 mm, rotor length: 1,000 mm, power: 45 kW (61.18 HP), Shredder, ideal for processing pallets, cables, plastics, and more. Equipped with a feed conveyor with magnetic drum for nail separation. Also suitable for plastics thanks to the powerful 45 kW motor. Fitted with hydraulic pusher. Rotor width: 1000 mm. Rotor diameter: 360 mm. Motor: 45 kW. 56 blades on the rotor. Original price was €80,000! Fedpow Td S Nsfx Am Ejpp

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Fedpfjy D Nicsx Am Ejpp Frame for overband magnet Moistening system Delivery date upon agreement

Condition: ready for operation (used), Year of construction: 2000, year of last overhaul: 2020, overall weight: 40,000 kg, Infeed opening: approx. 2000 mm x 1300 mm, hopper: approx. 5500 x 3000 mm Rotor shaft length: approx. 2000 mm Shaft speed: 16 RPM each Number of knives: 28 rotor knives with scraper Knife width: approx. 70 mm Fpodpfe Agpxaox Am Ejp Rated power: 158 kW Drive motor: 2 x 75 kW, with special coupling Hydraulic unit: 7.5 kW Hydraulic pressure intensifier (HNDE)

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) Fpsdpjyu Snuofx Am Ejp - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: new, Year of construction: 2026, Different sieve baskets Fpsdpo Ah Hgpsfx Am Esp - Material: Hardox 500 - Reinforced version - Size: 60x110 (for concrete) - Size: 40x110 (for concrete) - Size: 100x110 (for wood) - Custom size

Condition: not inspected (used), Year of construction: 2009, operating hours: 12,500 h, overall weight: 2,500 kg, power: 22 kW (29.91 HP), Used shredding machine designed as a twin-shaft shredder blade 30 mm drive 22 KW we currently have 4 used machines in stock with control system and partly installation frame and hopper. Fedora A D Topfx Am Espp

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Fpjdpfxjy D Nkts Am Eop Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: excellent (used), Year of construction: 2022, operating hours: 216 h, functionality: fully functional, overall weight: 1,250 kg, rotor diameter: 260 mm, number of blades: 14, total length: 1,880 mm, total height: 1,670 mm, total width: 1,120 mm, rotor length: 550 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 120 rpm, hopper volume: 400 l, rotational speed (min.): 80 rpm, warranty duration: 3 months, Machine in very good condition. Manufactured in December 2022. Reuser SD 60, 18.5 kW Fpodozlm T Ejpfx Am Eep The single-rotor universal shredder, Robust Reuser SD 600, is a symbol of strength, determination, and uncompromising performance. It operates according to its own rules, but in perfect harmony with your needs. Its minimalist yet distinctive design gives it a touch of timelessness. Advantages: Single-rotor shredder Material feed via excavator, forklift, or hydraulic lifting arm Unitronics® PLC control unit Hydraulic unit with 20 liters of oil

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final Fedow S Iiispfx Am Espp - Only 980 operating hours

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 838, input voltage: 400 V, LINDNER MS2000 CRUSHER – 90 kW – 2001 Industrial single-shaft crusher LINDNER MS2000 for sale, used in the recycling process. The machine is in full working order and is currently operating on a production line. It can be inspected while in operation. Technical data: Manufacturer: Lindner Recyclingtech Model: MS2000 Year of manufacture: 2001 Power: 90 kW Power supply: 400 V / 50 Hz Serial number: 638 Type: single-shaft crusher Working length of the rotor: approx. 2000 mm Rotor diameter: approx. 550–560 mm Rotor speed: approx. 80 rpm Fjdpfsz Ryyhsx Am Eepp Country of origin: Austria Condition: fully functional, in operation The machine is equipped with an industrial shredding system with rotor knives and counter knives. It is designed for shredding waste materials in recycling plants. The crusher is operational and continues to work on the production line. Inspection and testing are possible before purchase.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, overall weight: 3,500 kg, rotor diameter: 420 mm, number of blades: 44, rotor length: 800 mm, power: 22 kW (29.91 HP), type of input current: three-phase, rotational speed (max.): 100 rpm, input voltage: 400 V, additional equipment features: Swan Neck Conveyor, Equipment: CE marking, The S-22 shredders are designed for optimal ease of maintenance and serviceability. It features easy access to all service points, including interchangeable screens and knives, allowing for quick and efficient replacements or adjustments. The machine is equipped with a hydraulic tipping hopper, which provides effortless access to the cutting chamber, making the removal of foreign objects both safe and straightforward. Additionally, the swing-out power pack design Fedpfx Ao Aa Anrjm Ejpp enhances accessibility, streamlining routine maintenance and minimizing downtime. • Rotatable knives for an extendable lifetime • Rotational speed adjusted to suit material • Compact and solid design • Low maintenance efforts and easy installations S-22 comes with swan neck conveyor designed to discharge shred into 1m3 bags. Option of 20mm, 30mm and 60mm screen size. APPLICATIONS • Plastics • Wood / Timber • Packaging • Cardboard

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Fpodswh Naiopfx Am Eep Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, Rotor for UNTHA XR3000C shredding plant. Fpsdpfezcdtljx Am Ejp Completely refurbished (see current photos).

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Fsdpfxoxx N Dgs Am Ejpp Delivery date will be agreed upon.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,922 h, Doppstadt Inventhor Type 9 Engine Type: Diesel engine Make: MTU 6R 1300 Emission Standard: Stage V / EUROMOT III A Rated Power: 390 kW / 530 HP Fuel Capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Drum Number of Drums: 1 Drum Length: 3,000 mm Drum Diameter: 600 mm Drum Speed: -5 – 32 rpm Number of Tools (inserts): approx. 42 MACHINE DETAILS Total Weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport Width: 2,500 mm Fpodpfxsxcx Sne Am Eop Transport Height: 3,893 mm Transport Length: 9,973 mm Operating Hours: 4,724 h EQUIPMENT - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load caused by start-up torque thanks to load-free drum positioning - Self-cleaning function for the wrapping unit - Flexible shredding concept with various application packages - New door and housing design for improved maintenance access - Quick fold-out conveyor system at the push of a button - State-of-the-art monitoring concept - Reduced noise emissions Machine has been overhauled and is immediately available!!!!!

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Fpodpfoyu Undox Am Eep Delivery time: immediate

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Fpedsun Sx Sepfx Am Eop Installed power: kw 5.5

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Fedpfsxy Idhsx Am Espp Available immediately