Used Stl for sale (138)

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. - 1500/3000rpm. Itsdpsv T Tq Rjfx Ahysb - 380V.

Condition: used, Applicable material: Food Power: 25 kW (34 HP) Empty weight: 1.195 kg Dimensions (LxBxH): 110 x 160 x 130 cm Cargo space capacity: 70 l Current frequency: 50 Hz Voltage: 400 Rotation speed: 5000 rpm Volume: 70 l Iedpfjx Tcnqjx Ahyetb

Condition: excellent (used), Year of construction: 2006, operating hours: 1 h, functionality: fully functional, K+G Wetter VCM 120 STL Condition like new, used only few times to try. The blades are never sharpened, in factory installed. Everything works. Itodpfx Ajxpwc Sehyeb Machine length 2400 mm Machine width 2250 mm Machine height 1780 mm Machine weight 1650 kg Bowl Volume 120 liters

Condition: new, Brinkmann STL143 / 540-MVX+467 submersible pump, serial number as per photo, unused, 100% functional, scope of delivery as per photos Itedpfxsi D Hlco Ahysb

Condition: new, Brinkmann STL143 / 540-MVXZ+486 submersible pump 60 Hz, serial number as per photo, unused, 100% functional, scope of delivery as per photos Ijdpfx Ahoi D Hlkeystb

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Iedpfx Aex Ek Rdehyotb Interface for TTY 20 mA via 9-pin D-Sub connector

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Iodpfex Eg T Eox Ahyetb

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, loading space length: 13,870 mm, loading space width: 2,550 mm, Loading height 85-90 cm Isdexptnqspfx Ahyotb Last axle = steering axle Tyres 215/75R17.5 NO TÜV / NO SP "Subject to errors, misprints, and prior sale"

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Itsdpfx Ahjx An Eqjyeb

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Ijdjxpqy Rjpfx Ahyotb Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: good (used), Single TL 1-12-B10/20-TKN6 Water Temperature Control System Areas of application: • Temperature control in plastics processing Itodpfx Aexl A Dajhyjb • Tool and mold making • Chemical industry • Testing and laboratory applications Temperature range up to 90 °C Max. external volume 61 l Heating capacity 12 / 18 / 24 kW Cooling capacity 35 kW (20 °C supply) / 100 kW (15 °C cooling water) Max. flow rate 200 l/min Max. discharge pressure 3.8 bar Pump motor power 3.0 kW Circulating medium connections G 1¼" Cooling water hose connections 18 mm Dimensions (L × W × H) 690 × 400 × 880 mm Weight approx. 75 kg Heat transfer medium: Water For detailed technical data and processing instructions, we recommend We strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Year of construction: 2025, condition: new, We manufacture new row cleaners according to customer requirements. Isdpfsxrcyhex Ahyetb

Condition: excellent (used), Single Iedpfx Ahji A H Ipoystb STL 1-12-B10/20-TKN6 Temperature control technology

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 320 [mm] Itedpfx Ajuhawbjhyob - Spindle speeds : 8000 [rpm] - Spindle power : 8 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 8 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 115/120 [mm] - Y stroke : 100 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 40 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3600 X 2200 [mm] - Machine height : 1780 [mm] - Machine weight : 4600 [kg] EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump * with cooling unit for coolant - Bar loader : LNS HYDROBAR MINISPRINT - Oil mist extractor : DONALDSON - Cooling unit - Fire extinguisher * - Electric transformer - Long part device - Number of turning tool holders : 10

Condition: used, Year of construction: 2001, functionality: limited functionality, feed length X-axis: 30,000 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 500 mm, FOR SALE 3 3 Forest gantry milling machines as discussed. Below are the specifications for these machines: - Models: Type V2 2500 EAS and Type V3 2300 AS - Capacity: 30,000 mm (X) x 2,400 mm (Y) x 500 mm (Z) - Equipment: Equipped with 2 heads REFURBISHED IN 2001 CNC NUM 1060 General Specifications Below are the common specifications of the machines discussed: Models concerned: Forest Type V2 2500 EAS and Type V3 2300 AS. Working dimensions (Capacity): X axis (longitudinal): 30,000 mm (30 metres). Y axis (cross): 2,400 mm (2.4 metres). Z axis (vertical): 500 mm (0.5 metres). Itjdpex R Ta Esfx Ahyeb Head configuration: The machines are equipped with two machining heads.

Condition: used, Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders, function encoders, resolvers, resolvers -Manufacturer: Hengstler, encoder with cable and connector -Type: R176TD/500ED.4A25KF-FO 0 533 271 -Voltage: 10-30VDC -Number: 2x encoder available Itjdeldk Igepfx Ahyeb -Price per piece -Dimension: 155/120/H80 mm -Weight: 0.7 kg/pc.

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: West 6600 -Article No.: 0906 Z220000 S Isdpfx Ajtuycvshyjtb -Number: 6 controllers available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece

Condition: used, machine/vehicle number: 1605, Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: Kistler, tiltable welding turntable with mobile base - Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8m/min at Ø 400 mm - Direction of rotation: right/left rotation -Number: 1x available Isdpfx Ahjh D Il Tsystb -Total dimensions: 740/580/H630 mm -Weight: 145kg

Condition: used, Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: Hengstler, rotary encoder with cable and plug -Type: R158-02000EK.42KD 0 522 166 -Voltage: 10-30VDC -Shaft: Ø 10 x 20 mm -Quantity: 1x encoder available -Dimension: 160/70/H80 mm Iodjqv Hqkopfx Ahyetb -Weight: 0.4 kg

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: grado 906 -Article No.: 0906 Z2210 S -Quantity: 5 pieces controller available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece Itjdpfx Ahetuybujysb

Condition: used, Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders, function encoders, resolvers, resolvers -Manufacturer: Hengstler, encoder with cable and connector Itedeldk Injpfx Ahyjb -Type: R176TD/500ED.4A25KF-FO 0 533 339 -Voltage: 10-30VDC -Number: 1x encoder available -Dimension: 155/120/H80 mm -Weight: 0.7 kg

Condition: used, Technical details: diameter: Nr.1: ca. 6 mm diameter: Nr.1: max. 25 mm connection electric: 400 V motor: Getriebemotor / gear motor total power requirement: 0,25 kW weight of the machine approx.: ca. 120 kg space requirements approx. LxWxH: 0,85x0,6x0,1,0 m Wire Peeling Machine Application: peeling of electric wires to be processed parts: wires with PVC coat / rubber coating wire feed via angular rail 40mm on a length of 600mm infeed manual driver roller dia=80x21mm serrated copy of manual is available Itedpfxsu Nw Sno Ahyjb i.D. *

Condition: as good as new (ex-display), Kistler 2151B30154002 Electromechanical NC joining module List price 19.000 € net The NC joining modules NCFH Type 2151B... consist of a robust housing in which a displacement sensor as an absolute encoder and a piezoelectric push-pull force sensor are integrated. The compressive or tensile forces acting on the sensor generate a proportional electrical charge in the piezoelectric measuring element, which is converted into an analog voltage signal by the integrated charge amplifier. The drive motor is an electronically commutated AC hollow shaft servo motor controlled by a servo amplifier. Constant speed, i.e. constant traverse speed, is ensured. Standard functions such as joining on block, position and force-controlled joining as well as traversing on intermediate positions are supported. Ijdpfx Ajiuxtiehyjtb Technical data: With hollow shaft motor and compact design Integrated piezoelectric force sensor including charge amplifier and Displacement absolute encoder Measuring direction pressure / tension Measuring range 1: 30 kN Measuring range 2: 15 kN stroke: 400 mm Displacement repeatability: 0.01 mm Max. Travel speed: 300 mm/s With holding brake Item condition: new, with traces of storage Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2014, Includes existing spare filters. Air volume 8000 m³/h Electronic connection value: 1.5 kW 400 V/50 Hz Width: 2000 mm Height: 1650 mm Depth: 1000 mm Weight approx. 120 kg Itedpfx Aox Uz A Aohyeb

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance Itjdpfx Ahetix S Noysb X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!