Used Stl for sale (172)

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Iijdozubtlspfx Abvsg Further technical documents and documentation for the system are available and can be provided upon request.

Year of construction: 2022, condition: like new (used), JustLaser JustMark 4.2 Fiber Laser (Year of Manufacture 2022) – Like New – Industrial Quality For sale is a high-quality JustLaser JustMark 4.2 fiber laser from 2022 in top condition (like new). The machine has seen little use and operates flawlessly. Ideal for professional applications in metal engraving, series production, or customization. 🔧 Technical Details: Model: JustMark 4.2 Year of manufacture: 2022 Laser type: Fiber laser Condition: Very good / like new Areas of application: Metal engraving, marking, series production ⚙️ Benefits: Precise and fast engraving, even in series production Low maintenance and long-lasting Iedpfx Abjyu Szuevoig Professional industrial quality Easy operation and reliable performance Original price: 25,000 EUR net

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller -Type: grado 906 -Article No.: 0906 Z2210 S -Quantity: 5 pieces controller available Iiodpfx Abotuybuoveg -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Kistler, Tilting welding turntable with mobile base -Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8 m/min at Ø 400 mm -Direction of rotation: clockwise/counterclockwise -Axles: 2 pieces -tiltable: hand -Height adjustment: No -Quantity: 1 piece available -Overall dimensions: 740/580/H630 mm -Weight: 145 kg Iiodpfx Ajh D Il Tjbveg

Condition: used, Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: Hengstler, rotary encoder with cable and plug -Type: R158-02000EK.42KD 0 522 166 -Voltage: 10-30VDC Iisdpfoqv Hqkox Abvsg -Shaft: Ø 10 x 20 mm -Quantity: 1x encoder available -Dimension: 160/70/H80 mm -Weight: 0.4 kg

Condition: used, Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders, function encoders, resolvers, resolvers -Manufacturer: Hengstler, encoder with cable and connector -Type: R176TD/500ED.4A25KF-FO 0 533 271 -Voltage: 10-30VDC -Number: 2x encoder available -Price per piece -Dimension: 155/120/H80 mm -Weight: 0.7 kg/pc. Iiodpsldk Igsfx Abvsg

Condition: used, Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: Hengstler, temperature controller Isdpotuycvjfx Abvjig -Type: West 6600 -Article No.: 0906 Z220000 S -Number: 6 controllers available -Price per piece -Dimensions: 120/50/H50 mm -Weight: 0.2 kg/piece

Condition: used, Absolute rotary encoders, encoders, rotary encoders, encoders, absolute rotary encoders, absolute encoders, function encoders, resolvers, resolvers -Manufacturer: Hengstler, encoder with cable and connector -Type: R176TD/500ED.4A25KF-FO 0 533 339 -Voltage: 10-30VDC -Number: 1x encoder available -Dimension: 155/120/H80 mm Ijdpeldk Inofx Abvsig -Weight: 0.7 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1085, Offer 24448 Technical specifications: - Maximum load capacity 5000 kg - Maximum clamping diameter 1800 mm - Faceplate dimensions 1200 x 1200 mm - Continuously adjustable electrical rotation - Right and left rotation - Electric remote control - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm Iisdjwfq Nmopfx Abvog - Weight approx. 2500 kg

Year of construction: 2006, condition: good (used), machine/vehicle number: 1608, Offer 17231 Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - Rotation electrically infinitely variable 0 - 2.5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation + - right - left rotation - ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - weight approx. 100 kg - mounted on trolley approx. W 700 x H 150 x D 700 mm Iiodpfx Aenqzmcobvog

Year of construction: 2006, condition: good (used), machine/vehicle number: 1607, Offer 22161 Technical data: Iisdpfxonqzmnj Abvsg - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - rotary movement electr. infinitely variable 0 - 2,5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation - ground cable - space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Year of construction: 2006, condition: good (used), machine/vehicle number: 1610, Offer 22163 Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - rotary movement electr. infinitely variable 0 - 2,5 m/min - welding current transmission 400 A Iiedpfenqzp Uex Abvjg - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation - ground cable - space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 2007, load capacity: 7,500 kg, total height: 1,700 mm, total length: 4,000 mm, total width: 1,600 mm, table width: 1,250 mm, rotary table diameter: 1,250 mm, table load: 7,500 kg, pivoting range: 200 °, input current: 600 A, Welding positioner KISTLER - HP 7500 MACH-ID 9657 Make: KISTLER Type: HP 7500 Year: 2007 Iodpfxszd T Nqs Abveig Table Length: 1250mm Table Width: 1250mm Table load on 200 mm:7500 Rotation table: 0 - 1° Lifting chuck: 200° Table load:: 7500 Length: 4000mm Width: 1600mm Height: 1700mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, load capacity: 7,500 kg, total height: 1,700 mm, total length: 2,300 mm, total width: 1,300 mm, table width: 1,250 mm, rotary table diameter: 1,250 mm, overall weight: 3,500 kg, table load: 7,500 kg, Welding positioner KISTLER - R 7500 HP MACH-ID 9655 Make: KISTLER Iijdpfszd Tyiex Abveg Type: R 7500 HP Year: 2005 Table Length: 1250mm Table Width: 1250mm Table load on 200 mm:7500 Rotation table: 200° Table rotation: 0 - 1U/mm Table load:: 7500 Length: 2300mm Width: 1300mm Height: 1700mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021 ! Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: Ijdpfozfbi Isx Abvsig - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: new, KISTLER 4618A0 amplifier + 4067A2000 SN 1804719 sensor, unused in opened original packaging, 100% functional, scope of delivery as per photos Iodpsy Srpuofx Abvjig

Condition: ready for operation (used), Kistler 5877AZ000 maXYmos monitor for demanding curve analysis SN:4834063, used, in good condition, fully functional, scope of delivery as per photos Iisdpfjx Et Dgex Abvjg

Condition: ready for operation (used), Kistler 5877A0 maXYmos high-end process monitoring system SN:4853937, used, in good condition, 100% functional, delivery as per photos. Iiedpfx Aox Et Dajbvjg

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 350 h, overall weight: 2,359 kg, input voltage: 400 V, For sale is a high-quality, professional Just Laser core laser with 400W CO2 laser power. This machine is ideally suited for precise laser cutting and engraving in a wide variety of materials. The system is in very good condition and has seen little use due to its low operating hours (approx. 400 hours). It is ready for immediate use. The system features 2 cutting heads for the most precise results: 1. Standard laser head for cutting wood, MDF, HDF, plywood, solid wood, acrylic, leather, cardboard, many plastics, etc., and engraving wood, glass, leather, textiles, rubber, melamine, cardboard, acrylic, ceramics, and many plastics. 2. Metal cutting head with automatic height adjustment for steel, aluminum, copper, and brass. 3. K-Vision camera option Table size: 2540x1320 The system also includes: * 5 kW frequency-controlled extraction system Iodpoznbzvjfx Abvoig * Activated carbon and cartridge filters * 5 kW Mark screw compressor Inspection is possible by appointment. Cutting thickness: up to 24 mm for wood, 3/4 mm for steel sheet. According to the manufacturer, it is the fastest large-area engraving machine on the market, with a speed of 3.8 m/s.

Year of construction: 2020, condition: used, Year of manufacture: Jun 2020 New: No Serial number: 385/55 R 22.5 Iiodpfxjzhnmxe Abvog MOOIE BANDEN GOED PROFIEL 12 , 11, 11, 13 ,13 ,14 MM. PROFIEL.

Condition: used, Technical details: diameter: Nr.1: ca. 6 mm Iiedpfx Aju Nw Snsbvsg diameter: Nr.1: max. 25 mm connection electric: 400 V motor: Getriebemotor / gear motor total power requirement: 0,25 kW weight of the machine approx.: ca. 120 kg space requirements approx. LxWxH: 0,85x0,6x0,1,0 m Wire Peeling Machine Application: peeling of electric wires to be processed parts: wires with PVC coat / rubber coating wire feed via angular rail 40mm on a length of 600mm infeed manual driver roller dia=80x21mm serrated copy of manual is available i.D. *

Condition: used, FOREST-LINE SERAMILL V3 270 2T is a gantry milling machine designed for high-precision machining, high accuracy and process reliability. Working capacities: 2 tables (table lengths 3000 mm and 4000 mm, widths 2000 mm), X axis 5000 mm (with 1 table), Y 3400 mm, Z 1250 mm, A axis ±135°/2.5° and C axis 360°/2.5°; distance between columns 2700 mm, table load max. 10,000 kg. Main specifications: spindle nose SK50, spindle speeds 10–6000 t/min, spindle motor 31 kW, spindle torque 430 Nm, total power required 90 kVA; feeds 1–30,000 mm/min on X/Y/Z; rapid traverse X 30’000 m/min, Y 40’000 m/min, Z 30’000 m/min; voltage 3x 400 V 50 Hz. Equipment: tool magazine 120 places, tool holder 700 pce, automatic tool setting BLUM, touch probe M&H. Delivers tight tolerances and is suited to automotive, aerospace, machine tool, medical and watchmaking sectors. Ijdpfxoy T N Tto Abvsig

Condition: like new (used), 195 1940 M2 24 VDC Application: Machinery/Plant Engineering Width: 50 mm Height: 49 mm Depth: 85 mm Iiodpfx Abszfglbsveg Weight: 170 g Condition: Like new

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Iedpozcpnzsfx Abvjig Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, This Listing is for 1 of 2 Leitz Laborlux K Microscope, one still in box Ijdoxzh T Ejpfx Abvoig