Condition: good (used), Year of construction: 2022, operating hours: 600 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control Dodpjvrz Rvofx Afneun - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Dsdsxx Rrrjpfx Afnsun Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: used, Year of construction: 2021, operating hours: 4,826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent Dusdjvnmldepfx Afnsn

Condition: good (used), Year of construction: 2022, operating hours: 2,100 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Duedpfxjwnfwqs Afnjn Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Dsdpfxevnmmze Afnsun Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Djdpfoxx Tigex Afnjun Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Dusdpfxsxx N T Is Afnjn Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2021, operating hours: 200 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Duedpfx Afjvnq Tronjn Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips Duedsxx N Dgjpfx Afnen - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Dodpfsvnq Rksx Afnoun Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2016, operating hours: 816 h, 2016 | Dücker HM 160 Wood Chipper | Used Shredder | 816 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Dsdpfx Afeydr A Rjnoun 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39536 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Dsdsxx Rvkopfx Afnsun Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon Dsdpfx Aexd T Hcofnjun

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,317 h, overall weight: 19,000 kg, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size on agreement) Rear discharge conveyor with magnet roll Hydr. self propelled drive (for moving on site) Dusdpot Egddjfx Afnsn Twin drive separate drives for scraper floor and infeed roller Radio remote control

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 30,000 kg, power: 250 kW (339.91 HP), input voltage: 400 V, Stationary shredder LINDNER Jupiter 2200. Electric drive: 250 kW Dsdpfx Afsuv Htuenjun Including switch cabinet and hydraulic unit.

Condition: reconditioned (used), Year of construction: 2008, power: 250 kW (339.91 HP), Mobile shredder ARJES VZ 750 E Electric drive: 250 kW Duedpfx Afjxf Aqtensn Discharge conveyor Overband magnet

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, overall weight: 22,000 kg, power: 375.1 kW (509.99 HP), year of last overhaul: 2024, Diesel engine: 510 HP Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor Overband magnet Central lubrication Dujdporrg Ifofx Afnjn Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control We can also offer financing if required.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 564.86 kW (767.99 HP), VOLVO diesel engine: 768 HP Dujdpfx Afetpqchjnsn Tilting hopper Lift-axle Discharge conveyor with overband magnet Radio remote control

Condition: reconditioned (used), Year of construction: 2006, power: 320 kW (435.08 HP), Stationary shredder LINDNER JUPITER 3200 Dodswg Ev Dopfx Afneun Electric drive: 2x 160 kW Powerbelts new. Incl. hydraulic aggregate, electric control cabinet.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control Duodpfxew Rz Rqj Afnon

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Overbandmagnet for LINDNER URRACO 95. Dodpfxexur Ite Afneun Measurements: Total length: 270 cm, Width of the rubber belt: 110 cm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 200 kW (271.92 HP), Boost your waste wood processing efficiency with this Komptech CRAMBO 5200 E direct, a robust industrial shredder renowned for its high throughput and reliability. Manufactured in 2016 and in used condition, this model features a powerful electric drive, delivering consistent performance with low operating costs and noise levels. The integrated Multistar 2-SE star screen ensures precise material separation, complemented by a swivel conveyor and overband magnet for enhanced sorting and metal removal. Complete with control cabinets, this shredder is ideal for operations seeking advanced processing capabilities and maximum productivity. Don’t miss the opportunity to upgrade your plant with this proven solution from Komptech. Dujdpfxsxv Acqe Afnsn

Condition: excellent (used), Year of construction: 2016, power: 566 kW (769.54 HP), SCANIA diesel engine DC16 085A for LINDNER URRACO 95DK Djdpfx Aox Uqnuofnjun

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Duodpfxsu Di Azs Afnsn Foldable discharge conveyor. Radio remote control.

Condition: excellent (used), Year of construction: 2014, Diesel engine: 430 HP Rear duscharge conveyor Overband magnet Hydr. self-propelled drive (for moving on site) Radio remote control Dodpfx Aji Trvbefnsun We can also offer financing if required.