Double shaft shredder buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1

SHREDDER (DUAL-SHAFT) WRT SHREDDER DOUBLE SHAFT

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bb008mjibj WRT DOUBLE SHAFT SHREDDER -- 150 HP motor -- Feed opening 48" x 90" -- 2-1/2" Thick blade -- 32 Blades -- Loaded on your truck more
4

Double-shaft shredder RAUMASTER RWC-2-600

Wien, AustriaAustria dealership location
7156 km
2004
good (used)
Double shaft shredder with low hours working Capacity 100 m3/h Feed-in 1820 x 2500 mm Qy8z7q8p8 Rotors 2 unit. D = 630 mm (with interchangeable tools) rotational speed 30 rpm Motor 2 units a 90 kW frequency transmitter 2 units Input pocket of the crusher is equipped with hydraulic door (manual) and a bypass slope. RAUMASTER double-shaft shredders are built for extreme-duty, delivering throughputs of up to 100 to/h. Unlike old-style dual-shaft shredders, the two cutting rotors on RAUMA... more
1

HAAS Double Shaft Slow Speed Shredder HAAS GmbH TYRON 2000 XL - 2.0 - new edition

Dreisbach, GermanyGermany dealership location
6491 km
2017
as good as new (ex-display)
Year of manufacture: 2017 Operating hours: max. 150 hours Installed on tracks Grinding chamber configuration Incl. special hard welded reinforced tools, 4-elements with 7/7 discs Rpm of shafts individually and infinitely variable from 0 to max 41 rpm Incl. coarse breaker bar (=short teeth) Incl. tilting hopper Mxbhh Drive unit Drive unit with 294 kW/400 hp Scania Diesel DC09 Stage IV / EPA 4final Incl. sound insulation set (standard) Incl. Power Ram pre filter before air filter unit Incl. ce... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. V7vay0s AVIAN ASG 1200 Single-Shaft [...] purpose size reduction Shredder, ideally suit for lumps, purgings, solids and hard to handle materials prior to Granulation. Generally suited to the Injection Moulding, Blow Moulding, Extrusion, Rubber and Recycling industries. -- Equipped with: Vertical hopper, 64" X 59" opening, 75 HP rotor motor, single shaft with (74) cutter knives; WATER COOLED 16" dia. rotor/cutterhead grinds at 74 RPM. -- Hydraulic pusher r... more
5

UNDERFRAME for Untha 4-Shaft Shredder Untha Untergestell/Underframe

Merishausen, SwitzerlandSwitzerland dealership location
6673 km
2010
good (used)
Underframe for Untha 4-shaft-shredder RS100 C39r3boq (JUST UNDERFRAME - WITHOUT SHREDDER) Main-measurement: LxWxH = 4.3 x 1.87 x 1.8m Steel-construction with laterial Podest with railings and access-ladder. Included ist a crane-way-frame for changing cutting-system. more
8
Electric motor 30 kW + S5 control + 5.5 t 48 blade + 3 counter blade + working width 1,370 mm + rotor speed 110 RPM + hydraulic feed (table moves) + new rotor (250cc) + new knives (HARDOX) Bcrdcellcy more
7
No. of shafts: 1 Rotor width [mm]: 1.700 Rotor diameter [mm]:450 Bcceumixbn No. of knifes: 160 knifes Dimensions [mm]: 35x35x20 Power Consumption [kW]: Total 60 (2x30) Chamber [mm]: 1.700 x 1.550 Inlet [mm]: 1.700 x 2.150 Screen Ø [mm]: 40 Dimensions: Length [mm]: 3.520 Width [mm]: 2.760 (incl. E-Drives) Height [mm]: 1.960 Weight [kg]: 6.900 ca. more
13
Complete reconditioned machine 5/2018 Rotor storage: new Clutch bellows: new power bands: new wear parts: painting: new cabinet: new Cabling: new Single-shaft shredder ideal for the milling, granulation of vorgeschreddertem material. Application: industrial waste for thermal or wertstoffllichen recovery such as paper, cardboard, art and foams, rubber, leather, textiles, Bodenbelaege.etc. Work capacity: 1 x 200 kW Enclosure: complete with r & d Filler: 1770 x 1700 mm Einvu... more
3

Single-shaft shredder GROSS GAZ 82

Zuzenhausen, GermanyGermany dealership location
6611 km
good (used)
Rotor diameter 348 mm Working width 820 mm I9dgaud Inlet cross section approx. 800 x 1000 mm Hopper volume approx. 0,9 cbm Drive motor 22.0 kW . No.: #10439 Suitability: Reduction of residual and recyclable materials from wood and wood-like materials more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Mucl0g Mac Saturn 5232-HT Two Shaft Shredder -- (2) 75HP motors -- 3" wide cut with knives placed in two by two pattern -- Owner will consider having the knives sharpened, Will remove and ship sharp ones to buyer -- The system Consists of the following; -- Gaylord Tipper -- In-Feed Conveyor -- Shredder -- Shaker table -- 30' Sort Conveyor -- Crossbelt magnet -- Small Incline conveyor -- Seller said: We added a positioning system to raise and... more


double sha...
daily

New machines via email!

Stay updated!
5
TPA DUAL SHAFT SHREDDER conveyor belt hydraulic pressing unit Bcrqdlzpoq 2×30 kw motors infeed 1800 x 1600 mm.x 1000 H shredding chamber 1250x1000x600 (cutting block) knives diam.484 mm. electric cabinet construction year 2004 more
9

Twin shaft shredder Komptech Crambo 5000

Großenlüder, GermanyGermany
6598 km
2009
excellent (used)
CAT C13 engine Trailer Automatic feed device for trailer Hardfaced drums Sickle teeth Casssette withort preparation for bio cutting uniz Wv7p0 Overbelt magnet 1 set of screen basket (non bio) more
5
Second-hand machine after revision in 2016 -Blade unit -Translation new transmission oil -Bearings, oil seals, new -Control cabinet new -Base new Rotor width [mm]: 760 Rotor diameter [mm]: 286 Blade width [mm]: 39 Speed of main shaft [RPM]: 23 approx. Power [kW]: 1 x 22 Cutting plant opening [mm]: 760 x 500 Bcsc3pndbr Hopper volume [m ³]: 2.5 approx. Number of knife shafts: 2 Dimensions: Length [mm]: 2500 Width [mm]: 2000 Height [mm]: 4000 User documentation: German ... more
11
Complete reconditioned machine 5/2018 rotor storage: new Clutch facing: new Counter blades with reinforcement: new Power bands: new Knife holder: new Seal-rotor: new Sealing ring wall: new Screening cassette: new Wear plates: new All knives: new Terminal strip above: new Hydraulic oil: new Bcnxpl3lzy Single-shaft shredder ideal for the milling, granulation of vorgeschreddertem material. Application: industrial waste for thermal or wertstoffllichen recovery such as paper, cardboa... more
1

Single-shaft shredder Weima WLK 20 Jumbo

Zuzenhausen, GermanyGermany
6611 km
repair required (used)
Rotor diameter: 482 mm Rotor width: 2,000 mm Inlet cross section: 1,845 x 2,000 mm Task opening funnel: 2,400 x 2.465 mm Weight: approx. 15,000 kg Bcl3lqukdm Drive motor: 2 x 75 kW Machine is currently completely overhauled. Machine number: #10553 more
1
Elect./Voltage: 240/480 V, 60 Cy, 3 Ph V09gggj REDUCTION TECHNOLOGIES 4026 Dual Shaft Shredder;Equipped with: 100 HP motor; 31-1/2" knives; infeed hopper & stand; cabinet and controls. -- Excellent for tires, rubber, plastics, E-waste, light metals, wood product, paper and cardboard, and many others. -- Completely rebuilt in 2013 and only run 4 months afterwards. more
6
HATLAPA BIBER 3 kW Twin-shaft shredder Application used machine in excellent condition, ready for operating equipped with sharp knives. Installed power: 3 kW Voltage request: 380 Volt; 3 phases Shaft number: 2 shafts Blades number: 6 sharp knifes on each shafts Lenghts of shaft apprx.: ~450 mm Working space apprx.: ~450 x 350 mm Izeyvjx Emergency stop: Yes Dime... more
7

Twin shaft shredder Komptech Crambo 6000

Frohnleiten, AustriaAustria
7141 km
2007
ready for operation (used)
Sickle teeth Bio cutting unit Screen basket Hookframe Remote control Automatic feed device for hook Bcoggrpkpf new shredding drums more
6
Used singleshaft shredder KOMPTECH TERMINATOR 6000. Knxxwr72 more
6

granulator, shredder MEWA Recycling UG 1000 MS

Mannheim, GermanyGermany dealership location
6586 km
2000
good (used)
Universalgranulator UNI-CUT, Einwellenschredder Rotor length: 1000 mm, Drive: 90 kW Rotor knives: 25 pieces Stator: 5 units 830zpam2t Screen: 20 mm of hydraulic to handle, Discharge conveyor, more
2
Rotor diameter 387 mm Rotor width 860 mm Rotor speed approx. 74 RPM Task transversal funnel approx. 1340 x 840 mm Work cross section approx. 700 x 730 mm Drive motor 37.0 kW Hydraulic feeding device Weight CA. 4200 kg Ntlguhrz more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dgkui8h SATRIND K25/100 Dual-Shaft Shredder System (on steel frame for mounting over Granulator)Dual-Shaft Shredder: 42″ x 100″ Dual-Shaft Shredder equipped with: -- (17) 3″ Wide cutters on each shaft; with steel frame for mounting over Granulator. -- Complete with: -- ERECTO-VEYOR 14' Long x 8' wide Steel Mesh Belt Conveyor with 3/4 HP drive motor and 20" high side rails. -- (2003) ERIEZ Metal Detector & Conveyor with "EZ-5" Contro... more
6
HATLAPA BIBER 3 kW Twin-shaft shredder Application used machine in excellent condition, ready for operating equipped with sharp knives. Installed power: 3 kW Voltage request: 380 Volt; 3 phases Shaft number: 2 shafts Mufjfw Blades number: 6 sharp knifes on each shafts Lenghts of shaft apprx.: ~450 mm Working space apprx.: ~450 x 350 mm Emergency stop: Yes Dimen... more
7

Twin shaft shredder Komptech Crambo 5000

Frohnleiten, AustriaAustria
7141 km
2011
excellent (used)
CAT C13 engine Bcofucgnvh Trailer Magnetic drum Sickleteeth Bio cutting unit Remote control Central lubrication more
1

4 shaft Shredder (2 x 11 kW) WEIMA ZM 30

More Weima Zm 30
Thüringen, DeutschlandGermany
6658 km
2000
ready for operation (used)
4 shaft Shredder (2 x 11 30 Year: 2000 Hopper: 1.000 x 1.250 mm Screen perforation: 20 - 40 mm Rotor: Diam: 235 mm Length: 460 mm Cuters: 23 2 x 11 kW 25 rpm Condition: ready for action Location: Eastern Germany Dimensions: Weight: 1.3 tons Availability: on demand Bb0m383ecf Terms of delivery: ex works free on truck Terms of payment: 100% before dismantling/loading more
2

twin-shaft-shredder 2 x 7,5kW

Vettweiß, GermanyGermany dealership location
6401 km
good (used)
twin-shaft-shredder for light shredding Tasks - drive power: 2x7,5kW, 92rpm - cutting tools: 24 blades, 4 hook, approx 19,5mm width - cutting section: 485 x 340mm - weight: approx. 550kg - incl. electrical controller M2rj2 - incl. base frame - incl. hopper more
3
Item cross section approx. 900 x 1000 mm Cutter opening about 750 x 890 mm Number of knife shafts: 2 Bccohuu9nu Post press equipment 2 x 22.0 drive motor kW Weight approx. 4500 kg more
1
Elect./Voltage: Bbvqw0es0c UNTHA RS 30 Quad Shaft Shredder ...4-Shaft Shredder in a rugged compact design. Unlike Dual Shaft Shredders, "Quad Shaft" Shredders allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing [...]: -- Dual Drive Motors - (2) 15 KW (20 HP). -- Header width of 450 mm x 230 mm dia., cutting chamber opening of 450 x 700 mm; (46) cutter blades with 19 mm blade width with (1) hook. -- Main shafts speed of... more
7
BESTA 22 kW TWIN-SHAFT SHREDDER BESTA DRZ-069 1992. Condition: used machine, ready for operating equpped with new control panel. Nfcrv Electrical Engine installed power: 22 kW Rotation speed: 970 U/min Hydraulic engine power: 2,2 kW Rotation speed: 101 U/min Driving: SEW Volatge inquiry: 380 Volt; 3 fázis Shaft numbers: 2 shafts Shaft lenght: ~600 mm Working space: ~600 x 500 mm Eme... more
9
Stationary Terminator 3400S electric Drive unot Drum TM-F 32 teeth armored Outfeed conveyor Hfb2dzxy3 Discharge conveyor Remote control Cental lubrication more
4

Double-Shaft Multi Rip Saw Costa Lince

Barntrup, GermanyGermany dealership location
6505 km
1999
good (used)
Double-Shaft Multi Rip Saw make Costa Dvpjvm type Lince multi rip saw with 2 saw shafts built 1999 (rebuilt 2017!) CE mark working width 280 mm working height max. 140 mm 2 sawing units saw blade diameter 250 mm feed variable 380 V 50 cycles total connected load approx. 63 kW machine dimensions approx. 1900 x 1600 x 2000 mm weight approx. 2650 kg more
3

Twin shaft shredder MOCO AZ 11 / 11 kW

Vettweiß, GermanyGermany dealership location
6401 km
1991
good (used)
- drive power: 11 kW / 24 1/min / ca. 4400 Nm - cutting segments: 37 pcs, 1 hook, 12 mm width, like new - cutting section: 510 x 500 mm - one side with wear plate - weight ca. 1000kg - incl. electrical control Lqtbj - incl. base frame - incl. hopper more
5
Main drive motors Power: 75KW Feed belt motors: 2 x 3 KW Max infeed width: 800 mm Feed belt width: 500 mm Max blade speed: 3600 RPM Max board thickness: 270 mm (with blade diameter 450 mm) Min board thickness 20 mm Min board lenght 800 mm Max cut speed 30m / min Machine dimensions: Yrmso0 Lenght 3200 mm Width 2320 mm Height 1950 mm Fully opperational more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Vxwjij8 VECOPLAN RG 42/60 XL SINGLE SHFT SHREDDER -- 60 HP motor -- (48) Cutters-15" Dia. rotor. -- Hydraulic 2 speed ram with self contained hydraulic power unit -- Allen Bradley controls -- Comes with infeed conveyor to shredder -- Hytrol conveyor 1.5 HP motor & gear box, complete with motor starter and operator control mounted on conveyor. -- 38" wide belt with 1" cleats on 24" centers, 22 ft length at 30 degree incline, 12" side rails (belt will n... more
15
ULSTER (Made in England) heavy-duty Twin-shaft shredder. Hydraulic engine; Pump power: 18,5 kW Filled with NEW hydraulic oil (100 l) Tank capacity: 100 l Control Panel: NEW (CE standard) Bcrlcn8rnu NEW hydraulic pipes Heavy duty with law consumption of energy, slow rotating shafts with huge torque. Application for: plastic, textil, ruber, folies, paper, etc. shredding. more
5
We are selling our fully functional dual-shaft shredder. The machine is in a very good condition, hasn't been used for a longer time Ndeof more
5
Exhibition machine, full warranty Wear package on the gearbox side and on the bearing side also suitable for plastic shredding Power: 2 x 18,5 kW Hopper opening: 1.400 x 1.300 mm Throughput: material and screen depend Disc diameter: 280 mm Cutter: 700 x 760 mm Cutting shafts: 2 Bafhybglgb Cutting discs: 38 Clearing shafts: 2 Clearing discs: 38 Suction piece: 200 mm Screen perforation: 30 mm more
7

Single-shaft shredder, pre-shredder Komptech Terminator 5000 S

Pechhofer Weg 16, 92655 Grafenwöhr, DEGermany
6796 km
2011
excellent (used)
Low-speed pre-shredder, single-shaft shredder Hours of operation: milage h Bbq23m9dww Hydraulic power: 1 x 200 kW weight, assembled unit: approx. 17 t Shredding unit:-reel length: 3000 mm -Diameter of roller: 1050 mm -Maximum rolling speed: 29 (min-1) more
3

2-shaft shredder ARP CS 5000

Zuzenhausen, GermanyGermany dealership location
6611 km
used
2-shaft shredder Einlaufqürschnitt 400 x 400 mm With pressing device and base frame drive 2 x 7.5 kW Gz07ixocq more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ncff2 WEIMA WLK-18F JUMBO SINGLE SHAFT SHREDDER -- It will be fully reconditioned with (6) months warranty -- Feed opening 71" x 74" -- Rotor Diameter 19" -- Rotor width 71" -- 180 HP -- Loaded on your truck more
6
3-axle trailer + train eye 50 mm + 24.5 t + CAT-diesel C18 447,5 kW (new!) + self-propelled + Jockey wheel + tilt-out hopper + 2 crushing waves 2,820 mm long x Ø 610 mm + 134 cutting elements + shaft speed up to 43 R/min + basket punch 125 mm, alternative punch 250 mm + langes au stragsband, hydraulic folding + wireless remote 9ubwprxmm more
1

Slow-speed single shaft shredder TEUTON Z 55

Wardenburg, GermanyGermany dealership location
6399 km
2016
refurbished (used)
- Conveyor belt new, shredding unit factory overhauled, - Crushing tools new, - Optical condition very good options: - Neodymium magnetic separator new - Radio control system Nbcqp Working hours: Diesel approx. 2,350 h / crushing unit 1870 h more
6
A used restored single-shaft shredder from the german company ARP GmbH is sold The price is without VAT, freight and mounting Place: Denmark Dimensions: 2700 mm x 1350 mm x 2100 mm Hopper-opening: 1050 mm x 500 mm Weight: approx. 2 tons Electric power: 18,5kW Bbjo2w0wtm Revolutions per minute: 114 Knives (rotor): 34 Knives (stator): 36 Suitable for: - Paper - OCC and cardboards - Metal chips - Plastic Please contact us for additional information regarding the machine, ... more
6
– Machine on Stock Cro3zdr – After the technical inspection – BDB Status Technical Specifications: – 2 shafts with knives running on the tread – Shaft Length 490 mm – Shaft diameter 240 mm – shaft speed 18 RPM – Twelve knives on the shaft – Hopper Basket with Dimensions: 490 mm x 570 mm Dimensions: – Length 145 cm – Width 140 cm, – Height 290 cm Weight 1000 kg Main advantages of the machine: * Stable Design * Commendable * For every professional * Machine not painted – origina... more
3

2-shaft shredders ZENO ZDV

Zuzenhausen, GermanyGermany dealership location
6611 km
used
2-shaft shredder for wood Hopper opening: 2,500 x 4.000 mm Rotors: 2 PCs. Coyudjy Rotor flight circle: 575 mm Drive total: 88 kW The two gegeneinander ongoing rotors full steel are offered with various tool systems. These are massive, positive set, 2 x suitable crushing tools or 4 usable cutting edges on positive used tool holders. The 2-rotor system ensures optimal throughput performance for old wood, bulky, and similar materials. A very effective exposure of the impurities cont... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcbep389zs NMS HD150 DUAL SHAFT SHREDDER -- 150 HP motor -- Feed opening 60" x 40" -- (18) Cutters per shaft -- 1-3/4" Thick cutters -- Falk gearbox -- Good for Tires, wood, etc. -- Loaded on your truck more
2

Twin Shaft Shredder RMH RMH TS 530

Kalkar, GermanyGermany dealership location
6340 km
2015
as good as new (ex-display)
Model RMH TS 530 Motor power kw 22 Feed openning L mm 845 Feed openning W mm 500 Shaft distance mm 200 Hen3rya Rotor disk thickness mm 30/50 Rotor diameter mm 270 Rotor speed rpm 22/20 Machine weight kg 2300 Capacity (plastis) kg/h 1500~3000 more
2
Inlet cross section: 2500 x 1700 mm Drive: 160 kW Rotor flight circle: 670 mm Interfering substance removal: hydraulically prestressed and to open doors for interfering substance removal Rotor version: 14 PCs. positive cutting plates 120 x 120 x 55 mm on tool holders Counter knife with cutting gap adjustment Bmvcdzm2 Feed device: hydraulic Hopper: 1,700 mm high, with circulating pipe line tube Machine weight: approx. 24,000 kg more
6
Drives and services Drive motors blade shaft: 2 x 30 kW Hydraulic unit for push-button: 5.5 kW mass and weight Total external dimensions LxWxH: 2400 x 2850 x 2050 mm External dimensions during maintenance work (funnel tilted) LxBxH: 3000 x 3850 x 3050 mm Height of insertion: 2050 mm Insertion funnel L x W: 720 x 1450 mm Weight: Approx. 7500 Kg cutting set Speed of blade shaft: 101 rpm. Number of knives (reversible cutting edges) -Rotor (blade shaft): 240 blades -Stator (counter knife): 147 bla... more


double sha...
daily

New machines via email!

Stay updated!

to

to

Edit search
DOUBLE SHAFT SHREDDER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close