2 shaft shredder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Y2vtn8eg9 SHRED-TECH ST-500H Dual-Shaft Shredder w/Hopper & [...] ST-500 is specifically designed for high shock load and severe duty applications such as e-waste reduction, OTR tires, magnesium castings, municipal & industrial waste, hazardous waste, pallets, wood waste, copper and steel wire and cable, scrap aluminum, high volume production processing and other applications. Equipped with: 200 HP Electric radial piston hydraulic drive motor; superior close... more
5
18 KW a shaft before shredder, completely overhauled, as good as new. Ideal for the shredding of cables, with PLC control. Still several screens, available C7lhbmr more
1
Year of construction: 2011 Throughput Capacity up to 12 t/h Output size approx. 15 – 100 mm Total weight 13,5 t - 16 t 7wu30f3xt Cutting room volume 4,5 m3 - 5,6 m3 Shredding area 2025 x 2280 - 2525 x 2280 Feed opening 2790 x 2405 - 3290 x 2405 The Lindner Micromat is a powerful, highly configurable single shaft shredder, consequently designed for low energy consumption combined with high productivity. The Micromat can be individually configured and optimally fitted for its intended applicatio... more
4

Shredder shaft unbekannt

Rottenburg Germany
6643 km
USED
must go in KW 15! See photo. I have to give even a 200 KW motor see the following listing 7rrufqxxy more
5
MOCO AZ11 shredder ----- -Power: 11 kW -Cutting factory Assembly: 25 meter, 1 Zack, 19 mm, very good -Cutting factory opening: 510 x 500 mm -one side with wear plate Ky7ml2bl MOCO ZB1 indentation device ----- -Power: 0, 55kW -enhanced funnel attachment -ideal for crushing of bulky, difficult to collect goods Including electric composite control with overload reversing function and interference substance detection ... more
2
Inlet cross section: 2500 x 1700 mm Bmvcdzm2 Drive: 160 kW Rotor flight circle: 670 mm Interfering substance removal: hydraulically prestressed and to open doors for interfering substance removal Rotor version: 14 PCs. positive cutting plates 120 x 120 x 55 mm on tool holders Counter knife with cutting gap adjustment Feed device: hydraulic Hopper: 1,700 mm high, with circulating pipe line tube Machine weight: approx. 24,000 kg more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Xalx8wbc0 SHRED-TECH ST-100 Dual Shaft Shredder;SHRED-TECH Model MDL 100 dual shaft shredder with (2) 50 HP motors driving 230/460 volt electric motors through a 27.41:1 gearbox. -- Cutting chamber is approximately 32" wide x 61" long. -- Feed opening approx. 70" wide x 61" long. -- Also included: Drive cabinet and controls. more
3
Drive 2 x 11 kw Hsmhiyv Turn 26/min Number of knives 11 per shaft Base more
6
Shredding plant ERDWICH 112 kW dismantled, consisting of: 1.) Shredder Cutting plant size: 1500 x 1100 mm, Blade width: 50 mm, 3su0x2uf7 Drive: Electro-hydraulic (per rotor shaft 1 unit) 1 x hydraulic unit 75 kW, 1 x hydraulic Unit 37 kW ----- 2.) Feed hopper with scraper chain conveyor 4 m 3,. Length 4.2 m x width inside width of 1300 mm, 1200 mm,. 3.) Cabinet, complete documentation Equipment weight: ca. 15000 kg more
4

4 shaft shredders Untha RS 50-4-S

Rednitzhembach Germany
6750 km
1999
USED
TECHNICAL data of Untha RS 50-4S (industry): Year of manufacture: 2009 Supply: 400 V - 50 Hz Power: 2 x 30 kW Cutting plant opening: 1,230 x 700 mm Number 4 cutting rollers Main cutting unit: 19 mm wide / 2 teeth / E steel Side cutter: 19 mm wide / 8 teeth / E steel Main shaft: approx. 21 RPM / 9,900 nm Side cutting unit: approx. 32 RPM / 6,800 nm Wets0 Hole screening: 50 mm Ø and 20 mm Ø Control: Siemens SPS S7, controlled depending on the load including reversing automatic Other: ... more


2 shaft sh...
every day

New machines via email!

Be informed!
6
Granulator, Crusher Rotor length: 1600 mm Power: 110 kW Rated voltage: 400 V Rotor knives: 48 piece new Stator: 8 PCs new Screen: 20.30 mm Control Panel complete Central lubrication system Hydraulic post press equipment with hydraulic power pack B8nx2whnk Level monitoring Speed monitoring Discharge chute below the screen L = 3400 mm, B = 600 mm Weight approx. 18.5 t Operating instructions Very good condition, little used. Machine ready. more
1
****Price Reduction**** Zato GF4000 "Blue Devil" Twin Shaft Shredder for sale as seen. This is a big one! It’s a 2013 model which has been specifically designed for the maximum reduction of ferrous and non ferrous scrap. The machine is strong, safe, and quiet and unlike anything else on the market. It is ideal for mixed scrap, UBCs, white goods, complete cars, sheet metal, cast aluminium, car and truck tyres and many other applications. Production capability is 20 to 25 tonnes per hour of mixed... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Wjsbo3k SHRED PAX AZ-160 TWIN SCREW SHEAR SHREDDER -- Twin 75 HP motors -- Recent rebuild ( 10 hours since rebuilt) -- Rated capacity 6 to 8 T/HR (tires) -- Cutter width 2.720/2.717" -- Shredding chamber 44" wide x 95.4" long -- Shaft diameter 5.5" -- Torque shear 13.900 -- New infeed hopper, New supports, New knives, New inlet hopper, New discharge hopper, New electrical controls -- Auto shutdown alarms, Auto Reversing, Emergency stops, Jam sensing... more
4
For sale, a Wagner is WS 45, which was mainly to the cardboard and paper shredding use. Technical data: Single-shaft shredder with hyraulisch adjustable feed. 45 kW. Throughput: up to 1200 kg / h The device is currently still in use, is available late may B3moxdzki more
4
- drive power: 11 kW / 24 1/min / ca. 4400 Nm - cutting segments: 37 pcs, 1 hook, 12 mm width, like new - cutting section: 510 x 500 mm - one side with wear plate - weight ca. 1000kg - incl. electrical control Lqtbj - incl. base frame - incl. hopper more
5
Underframe for Untha 4-shaft-shredder RS100 Main-measurement: LxWxH = 4.3 x 1.87 x 1.8m Steel-construction with laterial Podest with railings and access-ladder. Included ist a crane-way-frame for changing cutting-system. C39r3boq more
6
Single-shaft shredder ideal for the milling, granulation of vorgeschreddertem material. Application: industrial waste for thermal or wertstoffllichen recovery such as paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Vex8o87z Work capacity: 1 x 200 kW Enclosure: complete with r & d Filler: 1770 x 1700 mm Einvuellvolumen: approx. 3m 3 Job opening: 1770 x 1315 mm Rotor length: 1770 mm Rotor flight circle: 740 mm Rotor speed: approx. 200-350 ... more
5
Shredder WS 15 Working hours: 70 hours Conveyor system System consisting of: -Conveyor belt under WS 15 with knock role -Permanent magnet with steel construction Vfj7vuvfu -Conveyor belt The machine was installed two months ago and is in like new condition. From store stock. more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 7j3tfzejs SHRED TECH ST-20 GRANULATOR -- 20 HP motor -- Cutting area 28" W x 14" D -- Slow speed / high torque -- Variable frequency drive more
2
GM Nr.: 948 Copebz9 Size of cutting unit: 760 x 800 mm Drive power: 37 kw Mode of drive: hydraulic Knife width: 50 mm Number of knifes: 15 Year of manufacture: 1998 Complete with machine frame, funnel with pneumatic press-in device and control more
6
Older but fully ready to use shredder with new hopper/base. Was pre-Shredder in cable recycling in action. Cutting area: 509 x 500 mm Dimensions, approx. 1,900 x 650 x 550 mm Weight: approx. 1,000 kg 3x7kjdhxi Power: 7,5 kW more
6
The engine was rebuilt in 2016 with a particularly low blade gap. It is suitable particularly for film recycling and similar applications. Due to the very high indentation effect can the machine E.g. very well in the recycling of food scraps. -Power: 30 kW / approximately 5100 nm / 57 1/min -Cutting factory Assembly: 34 blade, 3 Zack, 18.5 mm, polished -Cutting factory opening: approx. 700 x 500 mm -two sides with wear plates - scraper - motor with Thermistors -Weight approx. 1200kg -in... more
Secondary shredder, granulator Artech SG 80/120 DS 2 built in 2006 power: 250 kW machine dimensions: Lxwxh 4000 x 3750 x 5300 mm weight approx. 29.5 to. 3yfud3cde Throughput example: electronic waste up to approx. 8 t/h (with a screen mesh 40 mm) Delivery time: approx. KW-14 more
6
Inlet cross section: 1250 x 850 mm 3bowqmnx9 Blade width: 28 mm Number of knives 45 Engine: 37 KW New Cabinet New funnel New base The blades are in good condition. Weight: about 5000 kg Machine is ready for testing more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. B0j22mxs0 VECOPLAN RG42/40 XL SINGLE SHAFT SHREDDER -- 40 HP motor -- 15" Rotor -- Feed opening 42" x 48" -- (27) Cutters -- 3/4" Screen -- Feed extension hopper included -- Low hours -- Loaded on your truck more
1
GM Nr.: 01032 Size of cutting unit: 600 x 400 mm Drive power: 5,5 kW Diameter of hole sieve: 15-20 mm B9xyn2q3 Year of manufacture: 2011 Complete with machine frame, funnel with pneumatic press-in device and control. more
6
Cable - Vorshredder of special with many technical Extras: - adjustable contact pressure of the hydraulic pusher -Adjustable power consumption for automatic operation -Statormesser with interchangeable blade plate (identical rotor blades) -bolted knives holder on the rotor -Optimised funnel shape to less clogging This very easy to maintain and cost effective. Power:-rotor 17 kW -Hydraulic 2,2 kW Wb990 more
6
Four shaft shredder equipped with electric oven (control) Year: 2016 Complete Revision Very good condition. Motor power kW: 30 (2x15) Cutting: Cutting width mm: 960 Cutting Opening mm: 700x960 slices mm: 230 Number of blade shafts: 4 speed main shaft r / min: about 23 rpm side shaft r / min: approximately 34 grid of holes mm: 30 (sieve diameter) Dimensions: Length mm: 2000 Width mm: 1280 Height mm: 2.000 funnel opening mm: 1300 x 1280 Weight kg: 2,200 approx On request, other perforations (15-70... more
6
Slowly running Shredder for the (coarse) chopping from untreated material with interference of solids such as domestic and bulky waste, commercial and Industrial waste, construction sites mixed waste, wood, straw, Plastics of all kinds, rubber and tires, textiles, etc. Manufacturer: Lindner Recyclingtech GmbH Type: Lindner Jupiter 3200 Luvpywzp Year of construction: 2010 Hours of operation: approx. 23, 000 h Filler: 5.160 x 3.000 mm Filling volume: 9 m3 Job opening: 3,210 x 2.400 m... more
6
Manufacturer Doppstadt Calbe GmbH Type DW 2560 E1 Bueffel Year of construction 2007 Drive power 210 kW Rotor 2.500 x 600 mm (l x d) Rotor revolution speed 31 rpm. Througput rate capacity up to 40 t/h, depending on material Total weight approx. 24,1 t Motor Manufacturer T-T Electric Type LAK 4225 A Drive power 210 kW (460 V / 489 A) Hydraulic unit Manufacturer Hansa Flex Drive power 7,5 kW Dimensions Machine dims. without chute 6.240 x 2.300 x 3.150 mm (l x w x h) Feeding measurements 3... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Pmrldrcw WEIMA QUAD SHAFT SHREDDER ZMK-50T -- (4) shaft shredder -- 60 HP (2) 30 HP motors -- Feed opening 41-1/2" x 27" -- (2) Screens 1-1/2" and 3-1/4" -- Extra set of new blades -- Discharge conveyor -- Cross belt magnet -- Manual included -- Loaded on your truck more
1
Single-shaft shredder Inlet cross section approx. 1200 x 1200 mm 98c8mgds Drive 55 kW more
5
The M 22-60 is a high-performance single-shaft shredder for many tasks, such as the pre-cutting of cables, the shredding of electronic waste, waste plastics, wood etc. In contrast to other single-wave machines, the shredder by IRS has two instead of a stator for better product quality and higher hourly output. The optimized arrangement of the rotor blades reduces also the energy consumption. The horizontally-acting hydraulic pusher features replaceable wear strips and adjusts the pressure on... more
6
Four shaft shredder equipped with electric oven (control) Year: 2016 Complete Revision Very good condition. Motor power kW: 30 (2x15) Cutting: Cutting width mm: 960 Cutting Opening mm: 700x960 slices mm: 230 Number of blade shafts: 4 speed main shaft r / min: about 23 rpm side shaft r / min: approximately 34 grid of holes mm: 30 (sieve diameter) Dimensions: Length mm: 2000 Width mm: 1280 Height mm: 2.000 funnel opening mm: 1300 x 1280 Weight kg: 2,200 approx On request, other perforations (15-70... more
1
GM Nr.: 01029 Mqakv Size of cutting unit: 720x580 mm Drive power: 2 x 11 kW Knife width: 30 mm Number of knifes: 32 Diameter of hole sieve: 30 mm Year of manufacture: 2009 Machine without accessories (needs to be overhauled) more
3
-Power: 18.5 kW - cutting factory Assembly: 12 mm, saw tooth -Cutting factory opening: approx. 500 x 500 mm -two sides with wear plates (G-type) -Scraper - motor with Thermistors 00ptdtadm -Weight approx. 1200kg more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Bq8oblu UNTHA - RS 30 4-S "Quad Shaft", ...4-Shaft Shredder in a rugged compact design. Unlike Dual Shaft Shredders, "Quad Shaft" Shredders allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing [...]: -- The RS 30 4-S utilizes Dual Drive Motors - (2) 7.5 kW (10 HP). -- Header width of 450 mm x 230 mm dia., cutting chamber opening of 450 x 700 mm; (46) cutter blades with 19 mm blade wid... more
1

4-shaft shredder WEIMA ZM 50

Zuzenhausen Germany
6603 km
USED
4-shaft shredder Inlet cross section approx. 1000 x 1000 mm Drive 37 kW Mtqjdo more
6
Einwellenschredder / pre-Shredder LINDNER JUPITER 2500,. Drive: 264 kW (2 x 132 kW), 2 x inverter, Rotor speed at 50 Hz: 57 RPM Rotor length 2500 mm. Blade size: 145 x 145 mm, Service door hydraulic Siebkasette hydraulic, hydraulic power pack 11 kW, All wear parts have been replaced, Machine weight: 35 t Length: 7100mm, Transport width: 2850 mm, Height: 3100 mm (without hopper) System tested, cpl. with Panel/control,. Incl. machine feet, maintenance platform, Hopper,. Vnl9jybxq Tes... more
6
Single-shaft shredder ideal for the milling, granulation of vorgeschreddertem material. Application: industrial waste for thermal or wertstoffllichen recovery such as paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Power: 2 x 200 kW (400 KW) Enclosure: complete with r & d Einvuellvolumen: 4 m3 Job opening: 2135 x 2030 mm Rotor length: 2115 mm Rotor flight circle: 740 mm Rotor speed: approximately 264 U/min Number of rotor blades: 84 pieces Geggen... more
1
GM Nr.: 09074 Jueowm Size of cutting unit: 480x580 mm Drive power: 2 x 11 kW Knife width: 30 mm Number of knifes: 24 Diameter of hole sieve: 30 mm Year of manufacture: 2010 Complete with machine frame, funnel and control unit more
6
Very compact crusher for light grinding tasks. From German production. The AZ7 1994 was delivered new and never used. The machine is like new and has only minimal optical defects. The machine is equipped with many extras. The cutting unit has a high collection action and large throughput. In combination with the indenter, the crusher is very suitable for bulky plastic packaging, biomass and similarly easy to be crushed materials. The base is suitable for standard bins with 1100 liters volume. - ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Xal8qp32q VECOPLAN RG 42/60 XL Single-Shaft Shredder. -- Equipped with: Vertical 3 cubic yard hopper, 42" X 52" opening, 40 HP rotor motor, 15" dia. rotor with (27) indexable, replaceable cutter knives, rotor/cutterhead grinds at 125 RPM. -- Hydraulic pusher ram with 1.5 HP, two speed pump motor, monitored by programmable logic control feeding system, separate electrical control panel with pushbutton controls, 80 DBA noise level. -- Complete wtih: Inte... more
3

2-shaft shredders ZENO ZDV

Zuzenhausen Germany
6603 km
USED
2-shaft shredder for wood Hopper opening: 2,500 x 4.000 mm Rotors: 2 PCs. Rotor flight circle: 575 mm Drive total: 88 kW Coyudjy The two gegeneinander ongoing rotors full steel are offered with various tool systems. These are massive, positive set, 2 x suitable crushing tools or 4 usable cutting edges on positive used tool holders. The 2-rotor system ensures optimal throughput performance for old wood, bulky, and similar materials. A very effective exposure of the impurities cont... more
3
The operation of the machine is almost silent, as the dust is extremely low. The working principle of the machine based on the fact that two oppositely disposed knife shafts run into each other. The cutting discs are individually replaceable and can be sharpened easily. When overloading the drive motors, the direction of rotation of the machine is switched automatically to prevent blocking. After a few seconds the system automatically switches back to the working direction. The automatic directi... more
6
Two-shaft shredder Suitable for the pre-crushing of waste, plastics and light metals Similar raw materials. Manufacturer: MEWA Type: UC-60 Year: 1997 Wave length approx. 600 mm Cutting discs Ø: approx. 250 mm Cutting disc width (blade width) 30 mm Cutting discs: 12 pieces per shaft Funnel opening at the top approx. 1200 x 750 mm Height of funnel approx. 840 mm Feed opening Shredder approx. 600 x 750 mm With frame frame approx. 2660 x 2010 H 125 mm With geared motor (type plate not readable) E E... more
1
GM Nr.: 10057 Size of cutting unit: 480 x 580 mm 3indj00ch Drive power: 11 kW Knife width: 30 mm Number of knifes: 16 Year of manufacture: 2011 Complete with machine frame, funnel and control unit. more
5
Four shaft shredder equipped with electric oven (control) Year: 2016 Complete Revision Very good condition. Motor power kW: 37 (2x18,5) Cutting: 1Z-115, 8Z-86 New Cutting width mm: 760 Cutting Opening mm: 700x760 slices mm: 230 Number of blade shafts: 4 speed main shaft r / min: about 23 rpm side shaft r / min: approximately 34 grid of holes mm: 30 (sieve diameter) Dimensions: Length mm: 2000 Width mm: 1280 Height mm: 2.000 funnel opening mm: 1300 x 1280 Weight kg: 2,000 approx On request, other... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ht9dndyu VECOPLAN SINGLE SHAFT SHREDDER 42/40 XP-VP -- 40 HP motor -- Single shaft -- 15" Rotor, 27 Cutters -- Feed opening 42" x 48" -- 3/4" Screen -- Low hours -- Owner said the shredder is like new condition more
1
Inlet cross section approx. 800 x 800 mm Drive 11 kW Suitability: Wood Croov8b more


2 shaft sh...
every day

New machines via email!

Be informed!

to

to

Change search
2 SHAFT SHREDDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +49 201 - 857 86 112
or sell immediately
Try out the Machineseeker app now!
Machineseeker app for iPhone and Android.