Used Single shaft shredder for sale
4
Rotor diameter: 560 mm
J0u30ajz
Rotor width: 2030 mm
Number of rotor blades: 104
Number of stator knives: 3 (bottom)
Number of scraper comb: 3 (top)
Rotor speed: approx. 80-120 rpm
Filling opening: approx. 2800 x 2000 mm
filling volume: approx. 4 cbm
working opening: approx. 2030 x 1650 mm
drive motor: 1 x 75 kW / 1 x 90 kW
hydraulic unit/feed: 5,5 kW
weight: approx. 12000 kg
1
AVAILABLE: End of July 2022 !!
Diesel engine: 430 HP
Jyazqi
Rear discharge conveyor, overband magnet, radio remote control.
14
For sale tana shark. 2016 machine. 5647 hours. Services hard faced and ready to work. All in good condition. Magnet remote control. Can be seen working. For more information or to arrange a viewing please call.
Cbovelwdio
15
Universal Granulator UG
Drive power: 315 kW
cutting chamber: approx. LxW 2000 x 720 mm
rotor length 2000 mm
flight circle: 800 mm
rotor knives: 50 pieces
stator knives: 10 pieces
Rated voltage: 400 V
Sieve: according to customer's request 30, 40 or 80 mm
Control cabinet complete
Central lubrication system
Hydraulic pressure device with hydraulic power pack
Filling level monitoring
Speed monitoring
discharge belt L= approx. 6000 m
total weight approx. 29,5 to
Operating instructions: D
Fields of a...
12
Technical data paper shredder:
Manufacturer Bollegraaf
Type HBS 110 - 1500
Year of manufacture 1994
Drive power 110 kW
Crsevkr
Throughput approx. 25 t/hour
Dimensions of feed hopper 1,970 x 2,000 mm
Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H)
Weight approx. 11.5 t
Special features:
The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with repla...
Shredder MGZ basic machine (14 + 2 knives) starting from 14.995 €.
Option segment bottom four-sided +3.950 €
Option double row of knives + 995 € (additional 14 knives)
Well suited for shredding of:
- Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc.
- Medium hard thermoplastics like PVC,PP,PE, PS, PU, PET
The machine is also very suitable for paper, veneer or hardwood.
Included:
- special rotor with recessed knives (reduced load absorption...
5
Rotor diameter: 252 mm
94 rotor meters
1 row of stator knives
Rotor width: 1000 mm
inlet cross section approx. 1000 x 1000 mm
drive motor 18,5 kW
Bsy9ipjrys
weight approx. 2000 kg
9
Single-Shaft-Slow-Speed-Shredder Doppstadt DW 3060 K
Mercedes-Benz engine MTU 6R1300, 320 kW, EUROMOT IV
Machines weight: 30.000 KG
Track-chassis
18-channel remote control
Rear conveyor 7 m
Overband magnet neodym
Magnetic roller
Water spraying system
21 trapezoidal shaft teeth with DoppLock fitting system, L-size
20 trapezoidal comb teeth, L-size
Buuudkl77s
Comb extentions
Additional hydraulic drive 70 l
The machine is in a good technical and optical condition!
The machine will be sold in the...
6
For sale Lindner Shredder Single Shaft - 1.5m shaft size.120 x 4x cutter (sq) teeth Configuration Model/Type: RZ S1500P Man No: 512 Build:1998
Kw: 37 - 3 Phase / 50
New gearbox and lots more. This machine is in great working condition and must be seen. For more information or to arrange a viewing please call.
Cavv98qa
15
Universal Granulator UG
Drive power: 315 kW
cutting chamber: approx. LxW 2000 x 720 mm
rotor length 2000 mm
flight circle: 800 mm
rotor knives: 50 pieces
stator knives: 10 pieces
Rated voltage: 400 V
Sieve: according to customer's request 30, 40 or 80 mm
Control cabinet complete
Central lubrication system
Hydraulic pressure device with hydraulic power pack
Filling level monitoring
Speed monitoring
discharge belt L= approx. 6000 m
total weight approx. 29,5 to
Operating instructions: D
Fields of a...
4
VECOPLAN VAZ 200 SHREDDER Rotor 200 cm, Diam 38,5 cm, With 100 CV motor. No electric cabinet. Used but good condition. We are selling this machine because its duplicate.
Fdka7fp9
more picture and details available by mail
3
Feed opening: approx. 1150 x 1200 mm
Rotor width: approx. 1200 mm
Rotor diameter: approx. 600 mm
Dzh03u
Stator knives: 10
Rotor knives: 96
Incl. a second-hand control unit.
2
Rotor knives: 48 pieces
Stator knives: 6 pieces
Rotor diameter: 283 mm
Rotor width: 1.450 mm
Rotor speed: approx. 100 rpm
inlet cross section: approx. 1,430 x 1,530 mm
drive motor: 37,0 kW
hydraulics: 4,0 kW
Weight: approx. 7,000 kg
Brquc0ugad
Suitability: pipe and profile crushing
15
SHREDDER BANO 1200/500 V2
Lenght rotor (mm): 1200mm
Rotor diameter (mm): 500mm
Jiezmkj
Main motor (kw): 75
Hydraulic pusher
6
Single-shaft shredder Erdwich 11 kW
Manufacturer: ERDWICH
Type: EW Z730S
Year of production: 2000
Condition: Used machine in working condition;
Electric motor power: 11 kW
Voltage inquiry: 380 V/ 50 Hz/ 3 phase
Shaft length: 730 mm
Axis: 1 pc
Cbkfzzglpq
Hardened cutters: 24 cutters strung to the shaft
Safety precautions: emergency stop button
Hopper: yes
Sieve: yes
CE certificated.
Overall dimensions: 1500 x 1500 3000 mm
Weight: 1100 kg
15
Universal Granulator UG
Drive power: 315 kW
cutting chamber: approx. LxW 2000 x 720 mm
rotor length 2000 mm
flight circle: 800 mm
rotor knives: 50 pieces
stator knives: 10 pieces
Rated voltage: 400 V
Sieve: according to customer's request 30, 40 or 80 mm
Control cabinet complete
Central lubrication system
Hydraulic pressure device with hydraulic power pack
Filling level monitoring
Speed monitoring
discharge belt L= approx. 6000 m
total weight approx. 29,5 to
Operating instructions: D
Fields of a...
11
Lindner Komet 1800 plastic shredder
4000h worked on plastic
Completely renovated
Additionally included:
- Spare parts: knives, belts, screws
- Magnetic separator
Cbdoza2g8a
- Conveyor for collecting crushed goods
7
The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC.
These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed.
The pipe is f...
15
Knives mill Weima model WLKM10
-main motor 45kw
-hydraulic pusher with 200Bar
Bie7jdvno
-rotor lenght 1000mm
-rotor diameter : 310mm
-main shaft speed : U/min
-rotor knives : 12pcs
-stator knives : 2pcs
-screen : 12mm
15
Hello, I have a machine for sale UNTHA MR 2500, the machine is in very good condition.
- 2186 mth
- knife 3x3 cm
- The machine has two 55 kW motors
- The rotor diameter is 500 mm
- Rotor speed 50-120 rpm
- Weight 22 tons
Coly7uzo
- Two control cabinets and a set of sieves, shown in the photo, are sold with the machine
- The dimensions of the machine are 4.5 m long, 3 m high, 3 m wide
Please feel free to purchase.
11
Single-shaft shredder especially suitable for secondary shredding, granulation of pre-shredded material.
Application: Commercial waste for thermal or material recycling, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc.
Drive power: 2 x 110 kW ( 220 KW)
Control cabinet: complete with FÜ
volume: approx. 4 m3
working opening: 2135 x 2030 mm
rotor length: 2115 mm
rotor flight circle: 740 mm
rotor speed: approx. 264 rpm
Number of rotor blades: 60 pcs.
Rotor ...
15
Year of manufacture 12/2017,
Czaknmvrm
Power 55KW,
Q-rotor 450mm,
Speed 100 / min,
Number of knives 114 pieces on rotor and 4 fixed knives (counter knives).
3181 working hours,
The machine is equipped with new knives,
Welded rotor,
New sieve,
Included additional options:
Semi-hydraulic service door,
4 rows of knives,
One frame plus bottom hopper,
Preparation for rotor cooling.
We have many references in the European Union.
We speak Polish, German, English and Russian.
5
Zerma sing shaft shredder with compacting hydraulic push ram.
Very good machine. A real work horse and a reliable piece of machinery.
Cat3k0jyvq
Comes with Zerma overband magnet and 5 meter incline conveyor (minus €5000 if you are just interested in the shredder itself).
4
The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio.
By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system.
The shredder and the granulator are driven individually, which contributes to ...
6
+++++ We manufacture the original +++++
Our non-binding offer:
Copper cable recycling machine
A rotor shaft to the VZ 110 K without bearing parts ex our factory
- COMPLETELY STORED POSSIBLE !!!
Biitkers0y
- SUPPLY of KETTENRAD and KETTENRITZEL possible !!!
AGB on our homepage
3
Single-shaft shredder Lindner, type Micromat 2000, constructed 2004
Technical data:
Manufacturer: Lindner Recyclingtech
Type: Micromat 2000
Year of construction: 2004
Motor: 132 kW
Feed opening: 2790 x 2405 mm
Feeding height: 2594 mm
Capacity: 4,5 m³
Outlet width: 2225 mm
Rotor length: 2025 mm
Rotor speed: 63-147 min-1
Number of knives: 120
Dimensions: 4217 x 2478 x 3380 mm (LxWxH)
Weight: 13700 kg
Please note:
B9vbkaucbt
All technical data refer to specifications of producer/owner. We will n...
7
One-Shaft Shredder
-1000mm Rotor
-22kW
-48 Knives on Rotor
B3i3tik9zm
For:
Woodwaste, Plastics, Paper, Cable, Foil and more.
12
Doppstadt DW 3060K Buffalo
Gyrkwg
- Year of manufacture 01/2012
- Operating hours 4814
- Engine Mercedes Benz 430HP
- AD BLUE
- automatic fire extinguishing system
- remote control
- crawler
- 21 teeth
- overband magnet
Machine is overhauled
Immediately available
11
2 Mills to fine particle size for rubber, leather and textile
Brand : CONDUX / NETZCH
Type : HZ8/N1
Serial number : 2007
Year : 1970
Motor : 90 kW
Size of the fine particles : 7 to 5 mm.
+ Size of the fine particles : 5 to 2 mm.+
Capacity : 160 kg / h
B93qdujbw3
engine speed per minute: 985
cooling by water
New spare parts for the 2 Mills
4
ZXS 1500 - 2x75kW - working cross section: 1500 x 1490mm
ZXS 2000 - 2x90kW - working cross section: 1500 x 1900mm
ZXS 3000 - 2x110kW - working cross section: 1500 x 2700mm
ZXS series:
Bmaayrtu
The single shaft shredder for demanding shredding tasks. The machines are extremely robustly built and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard.
A wide range of applications for the ZXS series:
Many other materials can be shr...
12
Doppstadt DW 2560
P0ich
Year 2001
Hours 5500
Good conditions
5
Untha XR 2000
Year: 2005
Bstd. 6800h
Discharge belt and control cabinet are included.
Fkd32aa0
4
ELDAN Super Chopper, high performance mill.
SC2118T, 250 KW, year of manufacture 2011, approx. 29,000 operating hours,
Qgl7p
in very good condition, always serviced, still in use.
With spare rotor shaft, discharge vibrating chute and much more.
Benelux location.
Please ask for the price by email!
ISD Industry Support GmbH
1
M&j FineShred designed and developed for RDF production
Single shaft machine with pusher
Kdf3i8m
Capacity up to 21 ton/h depending on output size 80-10mm
9
New & Unused DGM Environmental Technologies general purpose model DGS 850 Single Shaft Shredder. Has approximately 840mm x 1340mm feed opening. Unit has 60 knives fitted to rotor which measures approximately 387mm diameter x 900mm wide and 6 stator knives. Unit is driven by 55kw, 400volt, 50hz, 1480rpm motor. Unit has hydraulic powerpack driven by 3.75kw, 220-380 volt, 50hz, 1430/1730rpm motor. Unit has 50mm bottom screen fitted. Unit includes Siemens Smart Line Touch Screen PLC control panel. I...
4
General:
The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all...
8
5