Screening machine 2 - deck on steel construction,
Manufacturer Fräbs Freudenberg
Type Roberg, circular oscillator with unbalance shaft,
Dimensions L 5,000 x W 1,500 mm
with plastic screen lining
Upper deck mesh size 20 mm
Lower deck without screen linings
with sprinkler, underflow tub, stairs and circulating platform, more
Girder production line performs inserting of steel binder into clay canal ellements, filling with concrete and vibrating.
Line consists of three main parts:
- Table for inserting of steel binder
- Concrete mixer,
- Reception desk with vibrating table.
Line is served with 2 or 4 workers, depending of model.
FERT-1 base model with electric drive without automatic storing away device and additional desk for finished girders.
- Max girder length 6,5m
- Total power 7 kW
- Total weight 1550 k... more
-1- used Kleemann & Reiner double shaft log washer type WTR 706, tub length 6000 mm, tub width 2160 mm, drive 37 kW, capacity up to 70 cbm/h. For washing raw material up to size 100 mm with maximum 20% sand. Good condition.
Dosing system Rad-Mobil Rowing device RD 1000 MOutput power up to 700 to / hDosing control up to 900 recipes1 x 4-fold rowing box 700 to hourly output at 4 chambers.Mixing plant for RC and aggregate for the production of mixed linessuch as antifreeze, gravel base course, factory mixed concrete aggregate, screed sand 2-8,Drainage filter layers, base courses for railway construction, recycling lines withAutomatic control for fast truck direct loading from the driver.
1 x-8 way linear mixer with mixer and humidification swing band
720to / h hourly output at 8 chambers per 22.5 cbm, expandable.
Mixing plant for RC and rock drilling for the production of mixed lines
Such as frost protection, gravel support layer, factory mix concrete surcharge, screed sand 2-8,
Drainage filter layers, carrier layers for railway construction, recycling lines with
Automatic control for fast truck loading directly from the driver.
Up to 900 recipes freely programmable
This plant can be used to mould concrete blocks of different forms, sizes and colours. It consist of following main components:
- block moulding machine with noise reduced housing, board size: 1400 x 750 mm, maximum inner mould size: 1280 x 710 mm
- 5 mould sets
- automatic store with 18 racks and a capacity of appr. 3400 boards
- automatic palettizer with horizontal strapping machine
- board stacker
- oil applicator for proofing of boards
- control room, automatic plc control and... more
GfA Screening Machine Covering
Dimensions L 5,000 x W 1,600 mm,
complete with steel construction and conveyor belts,
1 x ascending conveyor pre-screen, A-A 22 m, 800 mm, with cleated belt, 0 - 200 mm
1 x raw gravel stockpile belt pre-screen, A-A 40 m, 800 mm, 0 - 32 mm
1 x oversize grain discharge conveyor A-A 25 m, 650 mm, 32 - 200 mm more
Suitable for the production of mineral mixtures
FSS, STS, KG 1/2 etc.
4 chambers, hourly power eff. 720 tons,
PLC, direct loading on trucks, etc.
also upgrade to the HGT mixing plant possible, more
Stichweh washing and draining scoop wheel Type E 6509
- very well preserved - with FU speed control
Year of manufacture 2004
mixture capacity: .700 m³/h
solids capacity: 250 m³/h
Wheel diameter: 6.500 mm
wheel width: 900 mm
Tub length: 8,000 mm
Tub width: 4,400 mm
tub height: 3.000 mm
Number of cups: 24 pieces
clarification area: 18.2 m²
Drive: 11,0 kW
Empty weight: 32,000 kg
Operating weight: 117.000 kg
Small screening machine, 2-deck on steel construction with sprinkler and underflow tub, very good condition
Sieve length 3,000 mm
Screen width 1,200 mm
OD fraction 16 - 32 mm
UD fraction 8 - 16 mm
Underflow fraction 2 - 8 mm more
Setting machine for gravel grain decarburization 2 - 8 mm, type 1000,
Set bed size 1000 x 2000 mm, side pulsed,
complete on steel construction with compressor, control in container,
Dewatering Screening Machines
1 x swing gate valve type 800 X 2,600 mm Schauenburg
1 x swing gate valve type 600 x 1.500 mm Schauenburg
1 x dosing hopper,
3 x conveyor belts,
Stichweh twin-bucket-wheel (Doppelschöpfrad)
Type DS 3011/09 BL120
Year of construction 2000
Machine no. 713
Execution of a coarse sand bucket, a fine sand bucket,
Drive power 11 kW
Trough length 12.000 mm
Trough width 3.300 mm
Total height 3.290 mm
Total machine weight approx. 26 t
Operating weight approx. 80 t
Consumption approx. 100 m³ / h, coarse sand 0-4 mm
Consumption approx. 40 m³ / h, fine sand 0-1 mm
Amount of water/sand mix approx. 350 m³ / h
bucket width coarse sand 1... more
one used GfA Aquamator TYP AK 3.5/2000/160
Brand : GfA / Ketsch Germany
Machine - N° : ASA 0483
Year of constr. : 1994
Wheel distance : length 3.500 mm
Belt width : 2.000 mm
Flexo Belt high : 160 mm
Capacity : ca. 60 - 100 t/h
E-drive : 4,0 kW
Weight : ca. 5,8 to more
Used Creator Wheel TYP E 4509
In good condition, gearbox overhauled in 2010
Wheel diameter: 4,500 mm
Wheel cup width: 900 mm
Number of cups: 18 pcs.
Feartime: 6,000 mm, plus leakage trim
Tub width: 4,500 mm
Drive power: 5.5 kW
Gravel and sand preparation plant
producing sands according to recipe.
about renewed in 1998,
1 x Banerjee freefall sand grading tank built in 1998
1 x Banerjee dewatering screen ED 4,000 x 1,200 mm, year 2001,
1 x Fadila & Freudenberg DD 6,000 x 2,000 mm sieve, built in 1992,.
1 x sump pump with Linatex pump 4 ', drive 34.5 kW.
1 x MAB dewatering screen ED 3,000 x 1,600 mm, year 1992, 11 kW,
1 x GfA dewatering screen ED 4,000 x 1,600 mm, year 1995,
1 x Fadila & Freuden... more
mobile screening machine Powerscreen chieftain 2100 crawler 2 decks
Weight (approx.) 34,700 kg
Width (transport) 3.00 m length (transport) 19.10 m
Height: 18.30 m 3.47 m width (operation) (transport)
Length 19.80 m (operating)
Height 5.89 m (operating)
Screening machine 6.10 m x 1.55 m more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.