Double end miter saw buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Double end miter saw - year of construction: 1999 - voltage: 3 x 380 v - max saw blade diam. 350 mm Dhnnoxr8s - motor power 4,4 kW (6 HP) - opening 4200 mm more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Yij0jfbdk OMGA TI 3000 SUPER Double-End Squaring SawDouble Squaring machine with outward inclinable saw units (up to 45°) with scoring; left head fixed and right head movable (via handwheel). Length readout on mechanical gauge or digital display. A special pneumatic system moves the blades to the outside when the cut has been completed, thus preventing chipping the panel during the return stroke. Equipped with: -- (2) Saw heads each with 5 HP - 3,000 RPM.,... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Yilmu2x3t BREVETTI Prisma Maxi Double Mitre Saw with saw blade actuation via pull handles for accuracy and cut quality. -- Well suited for a low to medium volume custom frame shop. -- Dedicated right and left 45° cuts, with (2) separate 220 Volt motors. -- Features: Max. cut width 180 mm and max. cut height 80 mm. -- BREVETTI Prisma Maxi Double Miter Saw with (2) 1.5 HP - 2,800 RPM motors. -- This model no longer manufactured. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 97wcbe2pc CTD N 90 Double Miter (Toe-Notching) Saw6"" x 6"" x 4"" Toe notch cap.; production rate up to (10) strokes/Min, actuation by foot valve with [...]: 4-1/8"" x 4"" material height miter cap.; (2) 3 HP - 1,725 RPM saw motors, belt driven to saw arbors at 2,800 RPM. Equipped with: 16"" Dia. blade cap. (18"" max. dia. available as option), 1"" dia. saw arbors, blades move vertically on linear bearings on 1-1/4"" hardened & ground rods. -- Staggered bla... more
1
Elect./Voltage: L7dlj HMC ET-10 Left Hand 2-Saw Double End Trimmer. -- Machine has capability of trimming lumber from 6' to 16' lengths. -- Feed and drive by 10 HP drive with hydraulic pack. -- Includes: Waste belt 24"" x 16' for waste removal underneath the saw unit. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. M98q7 PENDU Model M5300 Gang Saw complete with the following features: -- Double Arbor. -- Diesel Engine. -- 30 HP Electric Sizer Head to remove excess height material. more
5
new plant with miter right / left at 30 ° with 3000 mm manual measuring stop and 6000 mm supply train, with heavy hydraulic 2 - miter band saw . Cutting area around = 520 mm Section rectangle = 680 x 400 mm Saw motor 3 kW Blade 5870 x 34 x 1,1 MITRE cut:-30 ° to + 30° Approximate weight machine to 1.95 . Amenities: -Spraying device Bbjfviraeq -Digital miter angle indicator -LASER cut on crack . -Another according to offer -System is available at the off timer for presentations! ... more
6

DOUBLEMATIC Double Miter Saw - DOUBLEMATIC

Düsseldorf Germany
6383 km
used
Offer
Another 1 days
Dimensions (l x w x h) approx.: 3600 x 800 x 1400 mm Weight approx.: 300 kg Description: Power of single engine 2 HP, blade Ø 250 mm, cutting max width 3000 mm. In Online Auction with approx. 205 further Machine Tools and other Assets! Ba23wflrgr Bidding ends: Friday, 23 February 2018 from 10am (local time) Auction start price: EUR 700 (plus VAT and 15% buyers premium) Your contact person: Roberto Chiarelli more
6

Alluminium Double miter saw EMMEGI CLASSIC ORION 450+/4

Düsseldorf Germany
6383 km
2004
used
Offer
Another 5 days
Dimensions (l x w x h) approx.: 5500 x 1600 x 2000 mm Weight approx.: 1300 kg Description: Serial number M275499, power 5,3 kW, engine speed 2820 rpm. Max. length 4200 mm, with 45/90° heads adjusting control. See photos M98a9 In Online Auction with approx. 165 further Machine Tools and other Assets! Bidding ends: Tuesday, 27 February 2018 from 2pm (local time) Auction start price: EUR 4.800 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
1
2 sawing units cut areas: cutting height 120 mm Cutting width 85 mm Saw blade ø 250 to 350 mm 350 . Beli9np7k Pneumatic device: saw lift pneumatically via foot switch infinitely variable feed speed Pneumatic clamping device. Blade rotation speed 2800 RPM 1.) l saw motor 1,5 kW 2.) r saw motor 1,5 kW Dust extraction connector 2 x 80 mm saw table 800 x 290 mm breaker tools: 1 x 1850 mm guide ruler stop ruler 1 x 1500 mm dimensions: Dimensions L x W x H 1100 x 700 x 1600 mm Weight 350... more


double end...
every day

New machines via email!

Be informed!
4
DGS Fabr. Rapid Type DGS BJ. 1979 Working length 3 m Height 120 mm with pneumatic pressure bar Bplih92m Swiveling more
6
double miter-box saw, manufacturer Wegoma, type SD16, exhausting, dimensions: ca. 4.000 x 500 850 mm (Lxwxh), Fvdg2dplq more
4
Working length: 2,600, working width: 100 mm,. Working height: 100 mm, 0 °-45 °. Wyoxl73 more
4
I sell the double saw with scoring REMA DMGA-35. Made in Poland 1990. Basbtohpfj more
6
I sell the double saw with scoring Bauerle DS Gvheig more
2
used Make Altendorf F-45 type duplex Execution for Mule wagon Location: Off the shelf 54634 Bitburg Bagvgwbpss Passing as is as seen -free load- more
5
Very robust machine, can be visited in operation in our factory, saw blades for aluminium and wood can be delivered too. Data: E9yuxehrg - Type: SD 16 - Serial No. 3802 - machine dimension: length 4100 mm x width 1000 mm x height 1500 mm - min. dimension: 550 mm (double-sided to sawing) - max. dimension: 3450 mm - diamter of saw blade: 36 cm - can saw 45° and 90° - power supply: 380 V, 16 A Price on request more
5
Working length min. approx. 220 mm If8aiqr7 Working length max. approx. 4,000 mm Cutting depth approx. 125 mm Work length adjustment automatically more
2
Double mitre saw Fabr. WEGOMA type SD 16 S Masch. # 43570 built in 1986 Technical data: Saw blade diameter 355/400 mm Section 200 x 110 mm min. cutting length 545 mm maximum cutting length 3500 mm Sqzdoler both units are infinitely adjustable on both sides 45 ° - 90-45 ° outward inclinable up to 45 ° (miter cutting ability) Speed of the saw blade 1400 / 2800 RPM. Power 3 HP Dimensions L x W x H approx. 4600 x 1200 x 1700 mm Weight 500 kg with -Hydropneumatic saw blade feed -pne... more
1
The machine is ready for use and can be visited at any time and demonstrated by appointment. Pickup or shipping by freight carrier at buyer's expense possible. Location: D-47877 Willich Svlgysema more
1
Striffler Twin-processing length: 2750mm Gluejft more
5
Doppelgehrungs aluminum circular saw Fabr. KALTENBACH type SKL 400 Fabr.# 104197 (2 x SKL 400) technical data: Saegeblattdrm. 400 mm Cutting capacity 90 ° round 135 mm Cutting capacity 90 ° square 120 mm Cutting capacity 90 ° flat 280 x 70 mm Section 45° square 105 mm Section 45° flat 55 x 210 mm Cutting speed 3000 m / min Feed speed 0-3000 mm / min Power 3.7 / 4,4 kW Weight 650 kg Size 910 x 1215 x 1700 mm with: -Roller conveyor Nvfgytk3a -Vertical and horizontal clamps -Foot sw... more
4
Twin-Technical Data Article number: MA917 Manufacturer: Elu Type: DG 79 Year: 1981 Machine no .: 27184 Weight kg: ca.550 Connected load: 380V / 2x2KW transmission U / min: 2100/3800 saw blade diameter: 330 size range: 0-45 / 4500 mm length Length stop: manually adjustable Accessories: Pneumatic clamping 3whvjh8d more
5
Solid cast construction with integrated round table guarantees a perfect profile support for cutting winkelgenaüs pivoting range of the saw heads from 0 to 45 continuously to the left and right adjustable. This external and internal dimension blanks possible Vertical and horizontal pneumatic material clamping devices ensure optimum profile fixing Specifications Minimum cutting length at 90 520 mm Minimum cutting length pivoted at 45 520 mm Largest cutting length 6000 mm locking points at 15, 30... more
6
With new OMRON touch screen control Working length 3350 mm hydropneumatic saw feed pneumatic clamping device C3nuiksu pneumatic auto tilting 45 ° / 90 ° / 45 ° Intermediate angle fixed both heads movable by spindle drive 2 HM saw blades 500mm overhauled more
4
Double mitre saw for aluminum rapid L x W x H: 400 x 150 x 170 cm Weight approx. 1200 kg Masch. No. 1909 Built in 1984 The machine is in good condition, ready to use. U8mkz3skd Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden more
2
Manual miter band saw with automatic suppression of saw frame for angles up to 45 ° left and right up to 60 ° Cutting capacity at 90 °:-approximately 258 mm -flat 320 x 190 mm Cutting capacity at 45 °:-approximately 210 mm -flat 210 x 100 mm Cutting capacity at 60 °:-approximately 135 mm -flat 135 x 100 mm 7pefg3k20 1.5 kW Cutting speed, frequency controlled 20-120 m / min Band saw blade dimensions 2910 x 27 x 0, 9 mm more
6
Marka: borging double side and saw double duspohl Model: borging double side and saw double duspohl Opis: saw miter drilling front, heads swiveling saw falling dimension of 3000 mm L202v Rok: 1997 more
3
Dimensions (l x w x h) approx.: 3600 x 900 x 1300 mm Weight approx.: 600 kg Description: blade diameter 300 mm, 2x motors power 1 hp, max opening 2800 mm 7rlpyz3hf Good condition. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Wny2g S. A. WOODS 525 BM-2 End Matcher;(1) Left and (1) Right separated shaper units. -- Tongue unit with: Trim saw approx. 5 HP motor, (1) set of Top/Bottom. heads approx. 5 HP motors for machining the tongue. -- Grooving unit with: (2) sets of Top/Bottom units (4 heads total) for machining the groove, approx. 5 HP motors on each. -- Part Dimensions: Approx. 3/8"" - 1"" Max. stock thickness, 8"" Max. width, and 10"" min. by 7.5' Max. length. -- ... more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Mlhjz NORFIELD 1020 Double-Sided Casing, Miter & Trim SawThe saw cuts side casing, head casing, brick mold and jamb stock. It quickly miters casing and brick mold, and square cuts stops or jamb stock at up to (30) pieces per minute. -- The feed system ensures steady feed rate and provides the additional benefit of operator safety. -- Double end cutting reduces labor cost and changeover from square to miter cuts, allowing quick and easy processing of comp... more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Baapdn8zn2 DOUCET EM-2 End Matcher, Double Ended;Specifications: -- 12"" Min. to 96"" max. length x 1-3/4"" to 5"" width x 3/4"" thick cap.; includes a traverse bar conveyor 21' long x 5' wide; bar spacing is available at 12"" or 8"" center to center. -- Basic system is powered by a 3 HP variable speed main drive (20 - 60 FPM) and is equipped with independent tongue & groove machining centers laid out on opposite sides of the transport table. -- Capaci... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Eqbtbct DOUCET EM-2 End Matcher, Double Ended:Capacity & Description: -- 12"" Min. to 96"" max. length x 1-3/4"" to 5"" width x 3/4"" thick cap.; includes a traverse bar conveyor 21' long x 5' wide; bar spacing is available at 12"" or 8"" center to center. -- Basic system is powered by a 3 HP variable speed main drive (20 - 60 FPM) and is equipped with independent tongue & groove machining centers laid out on opposite sides of the transport table. -- C... more
1
Elect./Voltage: G0rwyjf FRIULMAC Quadramat Double End Tenoner -- 2,500 mm (98"") Max. x 180 mm (7"") min. opening -- Loading space 642 mm (25"") -- Thickness 10 - 100 mm (0.4"" to 3.9"")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorixed opening with LED readout on the control panel, approx. 25"" infeed in front of hold downs. -- Variable speed feed 4-30 M/min. (13'-98""/min.), feed motor 4.5 HP -- Feed chain 2-7/8"" wide with rubberized pads -- Top pressu... more
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbiqww2nwg HOMAG NFL 26/8/25 Double End Tenoner -- Capacity.32 to 3.9"" (8-100mm)m 7.6"" to 98"" (190-2500 mm) opening Motorized (2-speed) opening with NC 21 Line control & screen display. -- 49""(1250mm) infeed front load area, 7.4""(190 mm) min. opening, 2-post machine, left side fixed. Each side equipped with : -- 1st Station: Jump scoring, 3 HP - 6,000 RPM motor; -- 2nd Station: Hog/trim saw,6 HP - 6,000 RPM motor -- 3rd Station: Universal Cope/mil... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. 2quzri GREENLEE DOUBLE END TENONER: -- 72"" Motorized opening w/indicator, 7"" min. width, 36"" load area in front of holddowns, (2) post machine. Each side equipped with -- 1st Station: Trim/hog tilting head, 10 HP - 3,450 RPM motor; -- 2nd Station: Top and Bottom Tenon Heads 5 HP, 3,450 RPM motors; -- 3rd Station: Cope Spindle , 7.5 HP , 3,600 RPM motorAdditional Specification: --Feed drive system is a 3 HP ""Vary Drive"" unit -- The opening an... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cdmagfds GABBIANI [...] CNC Controlled Double End Tenoner;3,000 mm (118"") Max. width programmable motorized opening with LED readout. - Stations include: Jump scoring, Trim/hogging, (4) Stack tooling coping [...]: -- 120 mm (4.72"") max. part thickness. -- 980 mm (38"") Load area and increase to 83"" with extensions in front of holddowns driven upper holddowns caterpillar type -- 235 mm (9-1/4"") min. length, left side fixed right side moveable. Each sid... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cqxfsphxw Material length 9"" to 80"" opening with Trim saws; Motorized opening with LED readout on the control panel; Left hand fixed with left hand fence line. -- Hopper magazine for material capacity: Minimum length 9"" (230 mm), max. 80"" (2,000 mm); width 0.8"" (20 mm) to 6-3/4"" (160 mm) and thickness 0.4"" (12 mm) min. up to 3.14"" (80 mm) maximum. -- Each side equipped with: (2) Trim saw motors 5.36 HP; saw blade dia. 15.75"" (400 mm). -- Hydra... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Ba3n00qguc FRIULMAC Quadramat Double End Tenoner -- 2,500 mm (98"") Max. x 180 mm (7"") min. opening -- Loading space 642 mm (25"") -- Thickness 10 - 100 mm (0.4"" to 3.9"")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorixed opening with LED readout on the control panel, approx. 25"" infeed in front of hold downs. -- Variable speed feed 4 - 30 M/min. (13 - 98 FPM), feed motor 4.5 HP -- Feed chain 2-7/8"" wide and with rubb... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ekc8ufp JENKINS 123 Double End Tenoner with Trim, Cope and Sanding -- 96"" Motorized opening with indicator, 43"" load space in front of holddowns, right side fixed, 2-post machine. Each side equipped with -- 1st station: Tilting trim/hog saw, 10 HP - 3,450 RPM motor; -- 2nd Station: High speed Cope head, 7.5 HP - 6,000RPM motor, 1 1/4"" spindle -- 3rd Station: Belt sanding unit, 5HP motor. -- Variable feed speed 15 -45 FPM, -- Rubber padded f... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Juorfe SCMI Concept 2000 Double End Tenoner -- 102"" (2,600 mm) Opening cap., motorized opening with keypad entry & LED readout. -- 36""approx. infeed chain area in front of holddowns, -- 0"" - 4"" motorized thickness opening with mechanical digital readout, 6"" min. width, 2-post machine. Each side equipped with: -- 1st Station: Trim saw tilitng 0-45° , 6.4/9 HP, 3,450/5680 RPM -- 2nd Station: Coping unit with 9. HP motor, 7,000 RPM -- 2 HP Drive f... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cqxctdppm 120"" Cap., motorized opening with indicator, Stations with Jump score - Trim/hog - Top & bottom tenons. -- 6"" Min. part width, approx. 12"" infeed area in front of holddowns, manual thickness opening, upper driven holddowns, single post machine. -- Each side equipped with: -- 1st Station: Jump score saw, 1.5 HP motor. -- 2nd station Trim/hog saw , 5.5 HP motor, universal mount. -- 3rd Station: Jump cope universal mount with 6.5/5.5 HP m... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Uwzrk9fdn SCM Concept 2000 Double End Tenoner96"" Cap., motorized opening with key pad and LED readout, 52"" infeed area in front of holddowns, 0"" to 7"" motorized thickness opening with mechanical digital readout, upper driven holddowns w/individual motorized height adjustment, 37"" pass line height, (3) post machinesEach side equipped with -•1st Station: Jump cope unit, 12 HP - 3,450 RPM motor, 40 mm dia. x 85 mm lg. spindle.• 2nd Station: High sp... more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Ttpmtvhp HOFFMAN MACHINERY MS35 SF PLC Controlled Double Miter Saw w/Dovetail RoutersDouble Head Dovetail Router with Saws and Servo controlled digital stop. -- The MS35SF Double Head Miter Saw is designed to simultaneously cut a left and right hand miter with each machining cycle. Upon cutting the miters, the saw blades retract and the router carriage moves upward routing one or two dovetail keyways in the mitered ends. -- The location of each keyway as... more
1
Elect./Voltage: 380 V, 50 Cy, 3 Ph. Zbnxb0yey RILESA AHS 1404 Double Sided Cut Off and Bore;Made in Denmark, RILESA builds heavy duty machinery for cut, shape, and dowel operationsMachine Specifications: -- (2) Drilling supports from side (each with 5 drills). -- (1) Drilling support from bottom (each with 5 drills). -- Drill bit centers 32 mm. -- The side drilling motors (2) x 0.25 kW. (.33 HP). -- The back drilling motor 1.1 kW. (1.5 HP). -- (2) Saws (pneumatically regulated), Sa... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvcp9d ATECH CRATER-02 A-700 Heavy Duty 28"" Upcut Miter Saw. Designed for straight and miter cuts of PVC, Vinyl, Aluminum and Wood. Designed in accordance with CE, UL and CSA Safety [...] with: Large 28"" dia. blade capacity allows for greater thickness cutting, approx. 2"" x 16-1/8"" to 10"" x 6"" at 90°, 2"" x 11-3/8"" to 10"" x 4"" at 45°. -- Crater-02 A-700 has miter lock angles at 75° - 60° - 45° - 30° - 22.5° - 15° - 0°, both left and right, where... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ced0jcbs LAUDERDALE-HAMILTON DOUBLE TRIM SAW: -- Specifications:Minimum distance between the saws 60"" (1,524 mm), maximum distance between the saws 109"" (2,768 mm);Panels are fed into (2) 5 HP (3.7 kW) Saw motors with 10"" (254 mm) dia. saw [...] output of the saw is approx 600 parts per hour. -- Feed Speed;The standard link feed chain speed is approx 120 FPM (37 MPM) per cycle;The chain stops at the end of each cycle which requires the operator to pu... more
1
Elect./Voltage: Uwyht0rpb KUPER EMZ-2 Double End Splicer; -- The cross-banding operation is done on both ends of the veneer sheet simultaneously. It reinforces longitudinally spliced veneers by means of a resistant glue thread which is applied at the ends across the grain. -- The special infeed system of the gluing heads pulls tightly together even fine end splits. This veneer edge protection avoids damage which often occurs during further [...]: -- Stitches veneers from 0.4 - 2 mm thic... more


double end...
every day

New machines via email!

Be informed!

to

to

Change search
DOUBLE END MITER SAW
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close