Double miter buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Wd7jo9h BREVETTI Prisma Maxi Double Mitre Saw with saw blade actuation via pull handles for accuracy and cut quality. -- Well suited for a low to medium volume custom frame shop. -- Dedicated right and left 45° cuts, with (2) separate 220 Volt motors. -- Features: Max. cut width 180 mm and max. cut height 80 mm. -- BREVETTI Prisma Maxi Double Miter Saw with (2) 1.5 HP - 2,800 RPM motors. -- This model no longer manufactured. more
5
Juzun3 Double end miter saw - Max. saw blade diam. 350 mm - Motor power: 4,4 kW (6 HP) - Opening: 4200 mm - Voltage: 3 x 380 v more
1
2 sawing units cut areas: cutting height 120 mm Cutting width 85 mm Saw blade ø 250 to 350 mm 350 . Pneumatic device: saw lift pneumatically via foot switch infinitely variable feed speed Pneumatic clamping device. Blade rotation speed 2800 RPM 1.) l saw motor 1,5 kW 2.) r saw motor 1,5 kW Dust extraction connector 2 x 80 mm saw table 800 x 290 mm breaker tools: 1 x 1850 mm guide ruler stop ruler 1 x 1500 mm dimensions: Beli9np7k Dimensions L x W x H 1100 x 700 x 1600 mm Weight 350... more
2

Double miter saws RAPID DGL400 (400x5000)

Werdau, GermanyGermany
6769 km
1981
ready for operation (used)
We offer a used double miter saw rapid. B9i3ieb0 Cutting area at 90 °: 120 x 80 mm Cutting area at 45 °: 90 x 80 mm Max blade diameter: 400 mm Blade speed: 2835 RPM. Maximum cutting length: 5000 mm Performance per saw drive: 2.5 kW Price on request! more
7

aluminum double miter Mecal Argus SW 452

Enkenbach-Alsenborn, GermanyGermany
6541 km
1995
unexamined (used)
serial-no. 91681, control, type EC4000, motorized positioning of the movable head, workpiece size max. approx. 4000 x 150 x 150 mm, tilting heads, saw blade Ø 450 mm, 2 horizontal pneumatic clamps, approx. 1,500 kg, L / W / H approx. 5,200 x 1,800 x 2,000 mm, material roller conveyor, W / L 200 x 3,000 mm, display defective and replaced by PC monitor Bcogl7epxx more
8
Double - miter saw GRUM - SCHWENSEN MOD: F 100 B: 1983 Power of the engine - per 1.1 kW equipped with two-hand control. Coovb8qi Saw blade diameter - 300 mm Width of cut at 45 ° - 100 x 100 mm Electric - pneumatic operation. The blades are adjustable thanks to the revolving leadership around 45 ° to the right and left. The descent time of the blades is adjustable by the air flow regulator of cylinder air. Min. cutting length at 90°-60 mm, max at... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. C7msocb CTD DM-60 Double Miter Saw -- Specifications: (2) 3 HP TEFC Motors. 16" blade cap. with 2 1/2" saw collars, mounted on preloaded & sealed bearings. (2) Belt drive centered between bearings, 2,800 RPM. Tables swivel from 90-45° toward each other; angular adjustment in opposite direction. -- Complete with: (2) Inside vert. holddowns. (2) 5" Dia. dust outlets; cutting cap. 45°, 4" high x 10" wide 90°; front to back 45° compound 2 5/8" high x 10"... more
2
used Make Altendorf F-45 type duplex Execution for Mule wagon Location: Off the shelf 54634 Bitburg Bagvgwbpss Passing as is as seen -free load- more
8

Double Miter Saw DS330

Bahnhofstr. 7, 75399 Unterreichenbach, DEGermany
6627 km
refurbished (used)
Double miter saw DS330 Working length 3000 mm Guj23fy0o horizontal and vertical clamping device, automatic work process. more


double miter
daily

New machines via email!

Stay updated!
4
Working length: 2,600, working width: 100 mm,. Working height: 100 mm, 0 °-45 °. Wyoxl73 more
4

Double miter saw Elu DG 79

Pfungstadt, GermanyGermany dealership location
6573 km
1981
used
Twin-Technical Data Article number: MA917 Manufacturer: Elu Type: DG 79 Year: 1981 Machine no .: 27184 Weight kg: ca.550 Connected load: 380V / 2x2KW transmission U / min: 2100/3800 saw blade diameter: 330 size range: 0-45 / 4500 mm length Length stop: manually adjustable Accessories: Pneumatic clamping 3whvjh8d more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Gvrrowxps OMGA V 235 Double Head Miter Saw w/OMGA FP 3000 Programmable StopSpecifications: 3-9/16" Max. cutting width, 2-3/4" max. cutting height. -- Equipped with: (2) Saw Heads with 2 HP - 3,200 RPM motor drives each head; miter blades set for 45 degrees; 350 mm (14") dia. blade cap., 30 mm dia. saw arbor. -- Includes: (2) Pneumatic holddowns; (2) 3" dia. dust outlets; scrap chute and magnetic starter. -- Features and Application: Useful in variety o... more
4

Double mitre saw/miter saw Rapid DGS

More Rapid Dgs
Bad Bentheim, GermanyGermany dealership location
6360 km
1979
used
DGS Fabr. Rapid Type DGS BJ. 1979 Bplih92m Working length 3 m Height 120 mm with pneumatic pressure bar Swiveling more
1
The machine is ready for use and can be visited at any time and demonstrated by appointment. Pickup or shipping by freight carrier at buyer's expense possible. Location: D-47877 Willich Svlgysema more
6

Double Miter Saw RAPID DGS

More Rapid Dgs
Unterreichenbach, GermanyGermany dealership location
6627 km
ready for operation (used)
RAPID Double Miter Saw DGS, Working length 4000 mm, Digital display Bblk8r7bna pneumatic sawfeed, pneumatic clamp, Tilting of heads 45 °, manual positioning by scale, 2 HM-saw blades Ø 370 mm overhauled, defect parts replaced, function checked more
3

Double miter saw Salvarani OK 350 Super

Marsala 3, 36027 Rosà (VICENZA), ITItaly
6992 km
1996
good (used)
Bbq2esbbug Double cut-off saw for salvarani Mod. OK super 350 Year 1996 more
5
Working length min. approx. 220 mm Working length max. approx. 4,000 mm Cutting depth approx. 125 mm Work length adjustment automatically If8aiqr7 more
2
CNC - double miter saw Fabr. ANTON type ADS EN Masch.# 39091, built in 1991 for efficient sawing of aluminium and PVC profiles Technical data: Saw blade diameter 450 x 30 mm Infinitely variable feed Air consumption 7 bar 200 l / min Blade speed 2800 RPM. Cutting length 260-5000 mm Cutting area square 265 x 100 mm Cutting area around 150 mm 2 x 2,25 kW External dimensions 6150 x 1200 x 1750 mm Weight 1460 kg with: -Control de to 408 - automatic tilting 45 ° on Vgnroxon more
5

double miter saw Wegoma SD 16

Pleystein, GermanyGermany dealership location
6825 km
used
Very robust machine, can be visited in operation in our factory, saw blades for aluminium and wood can be delivered too. E9yuxehrg Data: - Type: SD 16 - Serial No. 3802 - machine dimension: length 4100 mm x width 1000 mm x height 1500 mm - min. dimension: 550 mm (double-sided to sawing) - max. dimension: 3450 mm - diamter of saw blade: 36 cm - can saw 45° and 90° - power supply: 380 V, 16 A Price on request more
6

Double miter saw WEGOMA DS130S

Unterreichenbach, GermanyGermany dealership location
6627 km
used
With new OMRON touch screen control C3nuiksu Working length 3350 mm hydropneumatic saw feed pneumatic clamping device pneumatic auto tilting 45 ° / 90 ° / 45 ° Intermediate angle fixed both heads movable by spindle drive 2 HM saw blades 500mm overhauled more
2
CNC - double miter saw Fabr. ELUMATEC type DG 104 Masch. # 25591 year 1989 Technical data: Saw blade diameter 420 mm Blade bore 30 mm Cutting length 6000 mm 45 + 90 ° tilt range Blade rotation speed 2800 RPM. Section sh. Chart ill Cutting length 335 mm Power 2 x 4000 W Dimensions 6050 x 1600 x 1450 mm Weight 1520 kg with -Control E 200 -Roller conveyor E83pnj7 used from a reversal of the operation, in very good condition more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu7z0rwcu S. A. WOODS 525 BM-2 End Matcher;(1) Left and (1) Right separated shaper units. -- Tongue unit with: Trim saw approx. 5 HP motor, (1) set of Top/Bottom. heads approx. 5 HP motors for machining the tongue. -- Grooving unit with: (2) sets of Top/Bottom units (4 heads total) for machining the groove, approx. 5 HP motors on each. -- Part Dimensions: Approx. 3/8" - 1" Max. stock thickness, 8" Max. width, and 10" min. by 7.5' Max. length. --... more
3
MACHINE DATA Koch Model BD-60-A Double sided Boring & Dowel Inserting Machine with vertical Hopper Feed Make: Koch Maschinenfabrik GmbH & Co KG Model: Koch Model BD-60-A Serial#: A0705/7617 Year of Mfg.: 2007 Condition: Very Good few working hours Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in the US till now! DESCRIPTION Telephone modem for Tel... more
6
Gabbiani Double End Tenoner Model S.Q.V Full CNC Controlled Year 2001 2 X 2.4 KW Jump Scoring Units 2 X 7.5 K.W. Hogging Units 4 X 8.0 K.W. Stack Tooling Shaping Units (533 MM Height) 3000 mm Opening Min. Width 235 mm Max. Height 120 mm 99fxtx02b 0-36 Variable Feed Speed 33” Laydown Space 83” Laydown with Extensions Driven Top Pressure Full Sound Enclosure 460 Volts more
5
Pneumatic Double diaphragm pump - quick venting and direct suction of the medium -Works with handles up to 20.000 mPas and solids up to 2.29 mm Dry running without damage. Hermetically closed for moisture-sensitive fluids -Excellent for abrasive liquids with low to medium viscosity and shear sensitive materials 3 / 4 " Performance 61 litres per minute weight 4 kg Qlv2d3vga more
6
faceplate diameter 5300 mm swing diameter 6300 mm turning height 3500 mm max. ram stroke 1800 mm table load ca. 80 t faceplate turning speed range 0,35 - 14 U/min feed range 0,063 - 11,2 mm/min swivel range of slides - vertical +/- 30 ° cross rail - adjustment 3300 mm tool travel 3450 / 1000 mm turning tool - shaft cross cut 50 x 50 mm crossrail -rapid travel 500 mm/min rapid travers - turret head, hor./vertical 960 mm/min dimensions of the machine ca. 14,2 x 8,2 x 9,7 m total power requirement ... more
4

Planer-Type Milling M/C - Double Column MATTEC 80-30-60

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2015
used
x-travel 8500 mm y-travel 4400 mm z-travel 1600 mm Control Heidenhain iTNC530 surface area 10000 x 3200 mm rapid traverse 20 m/min spindle turning speed range 4000 U/min Torque 1000 Nm tool taper ISO 50 number of tools 61 Bcbhpsinxt total power requirement 60 kW weight of the machine ca. 62 t Portal milling machine Mattec 80-30-60 - spindle hours approx. 980 hours - Main spindle drive air-cooled - Lubricated and cooled two-stage gear-oil circulating air -> 1st stage - 1000 Nm in S6 opera... more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Gl0jqxdlg CELASCHI TSA400 C Double End TenonerMax working width 165" and with (5) working units each side;Feed System: -- 60" Infeed load space and 36-1/4" passline height. -- 3" Wide rubber pad surface feed chains and with chain dogs mounted every 15". -- Adjustable top pressure bars with single rubber holddown belts. -- Left hand infeed adjustable fenceEquipped with: -- 1st station: (Right/Left) adjustable height tilting jump scoring saws, 1.5/2.6 H... more
5

Vertical Turret Lathe - Double Column TITAN SC 4044

Mönchengladbach, GermanyGermany dealership location
6371 km
2002
used
faceplate diameter:4000 mm swing diameter:4400 mm turning height:2060 mm slide stroke:1200 mm Vsetae ram head dimension:250 x 250 mm faceplate turning speed range:1 - 92 U/min cross rail adjustment:1800 mm workpiece weight:30 t feeds:1 - 2000 mm/min main drive motor:55 kW total power requirement:80 kW weight of the machine ca.:64 t dimensions of the machine ca.:9,0 x 7,2 x 6,6 m with CNC SIEMENS 840 D for 2 axis tool Basic holder KM 80 In process camera screen coolant attachment and chip conve... more
10
Long bending machine, double-bending machine, bending Center Manufacturer Variobend Type DB 8.1,50 Bauajahr 2013 CNC controlled maximum length of Kant 8,600 mm maximum bending capacity 1, 50 mm Einlegehöhe 750mm Depth 1200mm maximum bending angle of 140˚ Measuring range depth stop 5-1200 mm High end equipment L x W x H 9800 x 1800 x 2200mm Weight approx. 10,500 kg Machine is located in an excellent condition 7vatybq more
5
Inrush current limiters Type ES00 Rated voltage 220V up to 400V Nominal frequency 50 Hz to 60 Hz Continuous current max 16A -Price per piece -3 x vorhanden Cy9lykuc Weight 0.3 kg more
1
pressure:40 t distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m Mskwyo 100 % before loading warranty: none used double colum... more
1
We offer for sale: Partition for double shelf / shelf, used 1 element length 1.32 m / height 2.80 m only &acirc ?&not 40,50 incl. VAT Optionally available: Material for 1 double shelf field: 2 pieces of double-sided frame / pillars, about 2,800 x 1.200 mm 8 piece backs height 400 / 500 / 600 mm Yifgxkm div. colors, such as light grey, black, yellow. more
1

DOUBLE END TENONER JENKINS 195

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Grxinikni JENKINS 195 Double End Tenoner PLC ControlesStationsStation 1 (Trim Saw): (2) 7-1/2 HP, 3600 RPM,1-3/4” D X 5” L Self Tightening threaded Arbor, 12” Cap. Trim Saws, Vertical, Horizontal and Tilting Axis PositioningStation 2 (High Speed Jump Cope): (2) 7-1/2 HP, Belted to 7200 RPM, 1-1/4” D X 8” L Threaded Arbor, None Tilting Left and Right Hand Lower High Speed Jump Coping heads, Vertical and Horizontal Axis Position... more
3

Vertical Turret Lathe - Double Column DÖRRIES SDE 280

Mönchengladbach, GermanyGermany dealership location
6371 km
1965
used
faceplate diameter:2800 mm Mljuf swing diameter:3500 mm turning height:2315 mm faceplate turning speed range:2,1 - 1112 U/min max. workpiece weight:12.000 kg feeds:0,044 - 8 mm/U ram head - vertical travel:1000 mm ram head swiveling:+/- 45 ° turret head - vertical travel:800 mm total power requirement:50 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,2 x 4,4 x 5,1 m with two vertical heads more
4

MITRE, compound - miter saw Graule ZS 200 N

Honiggasse 2, 66887 Jettenbach, DEGermany
6517 km
2018
excellent (used)
5 KW Bbx7gf3lkw Cutting height 200 mm Tiltable to 60 ° cutting height at 45 ° inclined 140 mm cutting width 430 mm at 45 ° swung 300 mm swivel up to 75 degrees including saw blades for wood 6,000 mm the length roller, growing left, stop valve with hand wheel of the machine to hidden Ellen, pneumatic lockable, length digital read 4.000 mm feed roller, growing at right via hand crank front both sides tilt warranty on new machine available at short more
5
Cabinet with drawers, tool Cabinet, steel workshop Cabinet Width 1430 mm depth 640 mm height 1130 mm drawers inside dimensions 610 x 460 mm Hdoxqsl Drawers height 6 x 50 / 1 x 70 / 2 x 145 / 1 x 195 / 1 x 400 mm Weight 290 kg more
8
Maximum pressing force: 1000 kN Bbp0css7ni Max stroke: 400 mm Table: 900 x 400 mm Total weight: 4500 kg Total height: 2960 mm more
1
Eisele KMS 90 Fully functional from an Ausbildungseerkstatt Saw blade diameter 275 mm Cutting capacity at 90 degrees: approx. 90 mm Cutting capacity at 45 degrees: approx. 90 mm Cutting capacity at 90 degrees: square Max 120 x 75 mm Cutting capacity at 45 degrees: square 80 x 75 mm Speed range 40 / 80 U/min Number of 2 speed drive motor 1.0 / 1.4 kW Motor speed 1.420/2,850 Rev/min Voltage 380 V / 50 Hz C0wznhq Machine weight approx. 150 kg more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bctbfllvde HOLYTEK ETC 66 S Double End Tenoner -- (6) heads; Trimming, shaping,disc/brush sandingTechnical Description: -- Machine opening 20o mm to 200 mm (7.8" to 78") -- Thickness maximum 120 mm (4 3/4") with manual adjustment and mechanical readout -- 1st Station: Trim saw, maximum blade size 305 mm, motor 5 HP, 3,40 RPM -- 2nd Station Universal shaping unit, motor HF 7.5 HP, 2 speed 3,000/8000 RPM, arbor 40 mm X 180 mm long -- 3rd Station Sanding/... more
5
Technical data: Pro pump 380/ 460 V 1450/1740 L / min 15/18 kW Article NR:. 121816894/0007 Price: €14500,- Vq0zwm more
5
x-travel:12000 mm y-travel:5600 mm z-travel:1250 mm workpiece height max.:1850 mm table-size:12000x3600 mm T-slot (width-distance-quantity): mm max. table load: kg distance between columns:4400 mm distance spindle nose and table: mm spindle drive:32 kW max. torque on the spindle: Nm spindle nose:50 ISO spindle speed:10-2500 U/min rapid traverse X,Y:10000 mm/min. rapid traverse Z-axis:10000 mm/min milling feed range:0-3000 mm/min Machine size (LxWxH):19.700 x 10.000 x 7.400 mm total power requir... more
5
Frequency inverters, frequency converters, drive inverter, controller variable speed drive Sinamics S120-Siemens double motor modules 6SL3120-2TE15-0AA3 Dakctdd -Max kW Input DC 600V Output 3AC 400V 5A/5A multiple converters available Award pieces 500/50/H270 dimensions mm Weight 5.4 kg / piece more
5
Maximum blade diameter: 450 mm Juw7w3 Hydropneumatic adjustable saw blade feed Vertical and horizontal clamping device more
Eisele KMS 90 Fully functional from an Ausbildungseerkstatt Saw blade diameter 275 mm Cutting capacity at 90 degrees: approx. 90 mm Cutting capacity at 45 degrees: approx. 90 mm Cutting capacity at 90 degrees: square Max 120 x 75 mm C0nihtp Cutting capacity at 45 degrees: square 80 x 75 mm Speed range 40 / 80 U/min Number of 2 speed drive motor 1.0 / 1.4 kW Motor speed 1.420/2,850 Rev/min Voltage 380 V / 50 Hz Machine weight approx. 150 kg more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbylhjyjvz FRIULMAC Dual Feed Double End Cut-Off Saw:For squaring the work pieces and for transportation to a Planer or Moulder with a straightening table. -- 78.7" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left hand fixed with left hand fence line. -- Hopper magazine - material capacity: Min. length 7.87" (200 mm), max. 78.7" (2,000 mm); width 1-1/8" (30 mm) to 4.33" (410 mm) and thickness 0.39" (10 ... more
1
x-travel 10250 mm y-travel 5320 mm z-travel 800 mm w-axis 2900 mm table-size 10000 x 4000 mm distance between columns 5000 mm workpiece weight 40000 kg distance table - lower edge spindle 3500 mm spindle diameter 100 mm diameter of quill 330 mm spindle turning speed range 30 - 4500 U/min spindle taper ISO 50 spindle motor 30 kW feeds x/y/z -stepless 1 - 6000 mm/min rapid travel x/y/z 10/20/8 m/min Control Fanuc 31i total power requirement 100 KVA Bbcxc0akll weight of the machine ca. 130 t dim... more
6
Pressure total: 315 ton Stroke: 350 mm Nbpvd Daylight: 540 mm Table surface area : 2.000 x 1.200 mm Ram surface area: 2.000 x 1.200 mm Required power: 65 kW Dimensions L x W x H: 4.400 x 2.950 x 4.800 mm Weight of machine approx.: 35 ton more
5
Frequency inverters, frequency converters, drive inverter, controller variable speed drive Sinamics S120-Siemens double motor modules 6SL3120-2TE13-0AA3 -Max kW Qlxzwtsus Input DC 600V Output 3AC 400V 3A/3A multiple converters available Award pieces 500/50/H270 dimensions mm Weight 5.4 kg more


double miter
daily

New machines via email!

Stay updated!

to

to

Edit search
DOUBLE MITER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close