Used Double-Walled for sale (15,982)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, System: SARTORIUS BIOSTAT-B Reactor: SARTORIUS UNIVESSEL Glass double wall (2Lx1, 1x1) Sensors: BioPAT Trace Software: BioPAT MFCS4 Lsdpfx Anovz Artocohl Chiller: EYELA CA-1116A YOM: 2022 Excellent condition, please check out our other listings as well.

Condition: used, functionality: unexamined, machine/vehicle number: BG05-31, Used mobile/moveable double-walled stainless steel liquid mixer Ljdpexn I Uvefx Ancehl Kettle: double-walled stainless steel, hopper diameter 40 cm, approx. 50 liters capacity Mixer BAUER BG05-31, variable speed Control 208-240 volt (industrial) with Siemens Micromaster frequency converter

Condition: good (used), Commercial and on-site fuel tanks in sizes ranging from 2,000 to 7,000 liters - available in multiple units, Lodpfxeil Hmuj Ancjhl - used, - double-walled, - cleaned, - optional DEKRA inspection upon request, - pump or fuel dispenser optionally included. Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, and must include the following information: Name, email address, and telephone number.

Condition: excellent (used), functionality: fully functional, The container was fitted with breakwaters to make it a viscous material promote mixing. Cool and heat the material using the jacket on the tank is done with liquid. Stainless still tank! Sizes: Height 1000 mm Diameter: 850 mm Volume: 550 l Electric motor: Manufacturer: Bauer Lodpfsg Rcp Hjx Ancohl 1,5kw 380v 50hz Type: D7300 Speed: 32u/min Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Lsdezzlh Hjpfx Ancehl Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, mileage: 1,250 km, power: 368 kW (500.34 HP), axle configuration: 6x2, color: red, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, - Braking system For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Iveco S-Way AS260S50Y/FS 6x2-4 Swing-wall box body + tail lift Body: Böse swing-wall box body, BODY DIMENSIONS: Length x internal width approx. 8,100 x 2,470 mm (designed for 20 Euro pallets), side clearance height approx. 2,200 mm, continuous side drop sides. Full roof retraction in open position. Loading platform height approx. 1,300 mm unladen. 2x trailer couplings (1x 40mm high, 1x 50mm dropped). CA Axle configuration: 6x2P, 3 axles, trailing axle, CT cab type. Lhsdpoyfpt Asfx Ancel AS MY version, DR steering SX left-hand drive, EM emission level Europe, EP engine 500 C13 Cursor 13, 500 HP Euro VI, GT gearbox TX-12M 12-speed HiTroniX, automated, MT gross vehicle weight 26 t, RT drive axle variant SR single reduction, single axle, SU suspension FP full air suspension, TF brakes DIS-DIS disc/disc, TT additional axle STER steered trailing axle, single tires, US usage STD standard, VE vehicle variant CABINAT standard chassis with cab, WB wheelbase 5,100 mm, 78507 rocking mode (free rocking mode), 73131 DRIVE tires 315/70R22.5, 01539 front grille design gun metal, 02326 cab plastic parts painted in cab color, 04047 left and right luggage compartments, 01627 IVECO logo gunmetal grey, 79240 black decorative film on doors, 00632 transparent sunvisor, mounted externally above cab roof, 72270 lower bed one-piece, firmness/feel - soft, incl. adjustable head section, 78563 air horn behind bumper (compressed air), 01743 upper bed with single mattress, 07599 axle load variant: front axle 8,000 kg/rear axle 11,500 kg (technically possible: 12,000 kg)/trailing axle 7,500 kg, 02532 battery isolator switch in cab, electrically operated, 02270 battery 210 Ah high performance AGM, 78713 battery charging socket, terminals, 05679 AdBlue tank, 80 liters, 07806 trailer coupling, make Ringfeder, 05688 fuel tank 480 liters, left, aluminum, 06156 trailer coupling, 40 mm, 130 kN, 00351 edge protection for frame end, 01934 ECO NORMAL PERFORMANCE MODE, 78388 electrical connection for body on left side of frame, 02548 side marker lights, 79454 preparation for additional headlights on cab roof, 75181 reverse warning beeper, deactivatable, 05108 warning beacon, 00237 retarder/intarder for ZF or Allison automatic transmission, 52081 traffic red RAL 3020, 30804 printed documentation (operating manuals), 30184 tire make: GOODYEAR, 20294 Tires 315/70 R22.5, 26095 FUELMAX ENDURANCE S D, 79443 printed operation and maintenance manual, 72525 foldable table in passenger area, 01743 upper bed with continuous mattress, 04047 left and right luggage compartments, 72536 additional diesel/water heater 4KW, 72970 standard refrigerator and storage box, 72251 with curtains at bed, 00876 Infotainment 10" TFT display + integrated Driver Pal, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sun roller blind for side windows, driver's and passenger's side, 02916 driver seat HI-Comfort, multi-adjustable, air-sprung, integrated headrest and height-adjustable integrated seat belt, lumbar support, with 3-level cooling or heating function, 72543 front LED headlights, 78715 LED rear lights, 72629 fog lights incl....

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm Lhodpfxezzkt Uj Ancol MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Lhsdpfx Anezzkvcjcol Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Lhodpjzy Hx Defx Ancsl Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 8,255 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 575 mm, For sale is a machine island consisting of two wire EDM machines, ZK Genius 700, with the corresponding Chameleon Quad automation system! The entire system is in very good used condition. The system consists of the following components: 1x ZK Genius 700, year of manufacture 2015, with 22,056 operating hours 1x ZK Genius 700, year of manufacture 2019, with 8,255 operating hours 1x Chameleon Quad, year of manufacture 2015 TECHNICAL DETAILS Wire EDM machines Zimmer & Kreim Genius 700 Travel in X-axis: 400 mm Travel in Y-axis: 350 mm Travel in Z-axis: 350 mm Lhsdpfxszy Hn Eo Ancel Table size: 575 × 500 mm Maximum workpiece weight: 700 kg Axes: Controlled C-axis and rotating spindle Processing modules: C-module for hard metal, PCD or etching processing Processing modules: O-module for very fine surface roughness Software: CIMCO Editor for path erosion Automation Chameleon Quad Electrode positions: 176 UPC pallet positions: 9 Loading system: Loading drawer MACHINE DETAILS Wire EDM machine 1 Manufacturer / Model: Zimmer & Kreim Genius 700 Year of manufacture: 2015 Operating hours: 22,056 h Wire EDM machine 2 Manufacturer / Model: Zimmer & Kreim Genius 700 Year of manufacture: 2019 Operating hours: 8,255 h Automation Manufacturer / Model: Chameleon Quad Year of manufacture: 2015 EQUIPMENT CO₂ fire extinguishing system from Kraft & Bauer Extraction system Double rotary gripper for Erowa ITS Single gripper for UPC pallets Loading drawer for UPC pallets

Condition: used, Year of construction: 2020, Used, heated/cooled pressure vessel Article number: 10901 Lhedpfxezuw Skj Ancel Last known use: Unknown Volume: 1200 liters Type: Standing, on 3 legs Material (media-contacting): 1.4301 / AISI 304 Dome lid: Ø 400mm Max. operating pressure: +1.27 / -0 bar Operating temperature: +50 / -10 °C Design: Double-walled Vessel dimensions: Outer diameter: 1000mm Cylindrical height: 1150mm Overall width: 1000mm Overall length: 1150mm Overall height: 2750mm Materials: Inside: 1.4301 / AISI 304 External parts: 1.4301 / AISI 304 Features: Outlet diameter: 25mm Distance from outlet to floor: 325mm / 825mm Height of legs: 1240mm Nameplate: yes Nozzle on the top head

Condition: used, functionality: fully functional, mileage: 58,109 km, first registration: 06/1971, fuel type: gasoline, axle configuration: 4x2, suspension: parabolic leaf (spring), Year of construction: 1971, Unique food truck Volkswagen T2 pickup with a custom-made round container (in the shape of a cup/can) The container is made of aluminum and is insulated/double-walled and custom-built. Standing height of over 2 meters. 2 side hatches for selling your products. 2 counters/platforms. Passage from the cabin to the sales area. Ready to drive – just start and go. Lhjdpozzbbiofx Ancjl 4 new tires. No mandatory vehicle inspection required. Some rust here and there, but there is no other one for sale. VAT-eligible vehicle. Transportation possible if desired. For more information or to arrange a viewing, please let us know.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Lhedjzzvf Aopfx Ancel Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog. Ledpfey Hp Rrox Ancjhl

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Lodjzzlntjpfx Ancohl Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: Lhodpfx Anjzzvhdscsl • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Lsdpfx Aez D Ifqencohl Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Ljdpfx Aswgmyqjncjhl Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: new, functionality: fully functional, Year of construction: 2026, color: other, overall weight: 2,500 kg, loading space width: 300 mm, loading space length: 600 mm, Equipment: air conditioning, bathroom, cooling unit, hot water, lighting, shower, Hello, we are a manufacturer of: Pavilions Offices Apartments Sanitary units Food service units Made with the best polyurethane PIR insulation, 120 mm thick. We focus on very good insulation. We always have standard containers in stock, 6x3 meters, suitable for use as offices. Floor: 120 mm thick polyurethane composite panel with a thermal transmittance of 0.18 W/m2K, plus an OSB panel and PVC flooring. Lhodjz Drpajpfx Ancjl Walls: Polyurethane composite panel, 100mm or 120 mm thick, with a thermal transmittance of 0.22 W/m2K or 0.18 W/m2K. RAL 7016 anthracite color. Roof: Polyurethane composite panel, 100 mm thick, with a thermal transmittance of 0.22 W/m2K. External and internal finish in RAL 7016, but a wide range of decorative options are available. Window, dimensions 980 x 2000 mm – 1 unit. Opening window, 900 x 1900 mm – 1 unit. Aluminum entrance door with glass – 1 unit; dimensions 1100 x 2100 mm. Electrical system: 2 lamps, 2 double sockets, 1 double switch, fuse box. Lead time: 2-5 weeks, depending on the specifications. IT IS POSSIBLE TO CREATE A CUSTOM DESIGN FOR WINDOW AND DOOR PLACEMENT. FOR AN ADDITIONAL FEE. AIR CONDITIONING BATHROOM Kitchen Wood interior Heating, and much more. Price for a standard 6x3 unit. OTHER DESIGNS AND DIMENSIONS ARE AVAILABLE. The fastest way to contact us is via WhatsApp or email. We always arrange transportation for our customers.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWa 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan mounted above the wall + Fan height adjustment Airflow: 7,200 m³ / h Motor: 0.75 kW, explosion-proof (ATEX) Exhaust pipe: 500 Ø mm Depth: 900 mm The piping should not exceed a total length of 3-4 meters. Ledpsfv Hiqofx Ancjhl Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Paint stop filter mat with clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: new, Brand new, heatable/coolable stainless steel container with double jacket/thermoplate and insulation Bases available! Lhsdpfx Anov Durkocjl Item number: 10712 Volume: approx. 270L Type: standing design on three feet Design: with thermoplate and insulation Material (in contact with media): 1.4301 stainless steel Surface: IIId, satin finish on the outside Inside weld seams: ground Operating pressure: ATM Operating pressure thermoplate: +1.8 bar Max. operating temperature: 95°C Top base: conical base 15° Bottom base: conical base 60° Container dimensions: Outer diameter: approx. 537mm Inner diameter: 477mm Cylinder height: 1200mm Total height: 1833mm Height of feet: 550mm Equipment: 1x thermoplate H=600mm around cyl. Part of the container, inlet/outlet 1/2" sleeve 1x insulation t=30mm rock wool for cylinder and base, welded stainless steel insulation jacket 1x dome cover DN300, clamp and seal EPDM 2x DN65 DIN11851 sight glass on the top / dome cover, provided 1x 1/2" nipple on the top 1x spray head in the container through the side wall, 360° rigid. 1x weld-in sleeve on the side, provided 1x outlet DN32 DIN11851 threaded connector 1x nameplate

Condition: used, Double-Head Mitre Saw for Aluminium Profiles – Pertici Univer 403 P Main Features Double-head mitre saw for aluminium profiles Numerical control for managing cutting dimensions Cutting heads with rotation and tilting functions Automatic positioning of the movable head Pneumatic profile clamping system Suitable for aluminium window and door manufacturing Maximum cutting length: 3,200 / 3,300 mm Technical Data Blade diameter: Ø 400 mm Blade bore: Ø 30 mm Blade speed: 3,180 rpm Installed power: 3.1 kW Power supply: 380 V three-phase – 50 Hz Current consumption: 6.2 A Operating pressure: 6.3 bar Air consumption: 13.9 Nl/cycle Weight: 370 kg Applications Lhodpfszb Ehnex Ancel Aluminium window and door manufacturing Doors and windows Curtain wall systems Light metal fabrication and construction work

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Product code: MPP001699 Height: 750 cm Depth: 267 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Ledpfx Aex Ig Hmjncehl I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Height: 750 cm Depth: 270 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 1,000 kg, total height: 3,500 mm, load capacity: 2,500 kg, throat depth: 5,000 mm, working height: 3,000 mm, DGUV certified until: 06/2025, Equipment: documentation/manual, Column-Mounted Jib Cranes & Wall-Mounted Jib Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Systems Available For sale are several column-mounted and wall-mounted jib crane systems from Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems offer a load capacity range from approximately 50 kg up to 2,500 kg, making them suitable for use in workshops, manufacturing plants, assembly workstations, as well as in in-house logistics. Some of the cranes are designed as classic column-mounted jib cranes with a single jib arm, while select models feature a double-jib column design, allowing coverage of two separate working areas. All cranes are equipped with electric chain hoists and trolley carriages, operated via pendant controls. The systems can be purchased individually. Inspection by appointment is possible. Taucha Column-Mounted Jib Crane – Load capacity 2,500 kg Heavy-duty column-mounted jib crane with floor-mounted steel column and jib arm for industrial lifting and assembly applications. Taucha Column-Mounted Jib Crane – Load capacity 2,000 kg Column jib crane with pivoting jib for material handling in production and assembly areas. Taucha Column-Mounted Jib Crane – Load capacity 1,600 kg Industrial crane with column base and pivoting jib, suitable for medium to heavy loads. Taucha Column-Mounted Jib Crane – Load capacity 1,250 kg Column jib crane with jib arm and trolley for precise material movement. Taucha Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with electric chain hoist and pivoting jib for assembly workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with Liftket electric chain hoist, suitable for industrial lifting operations. Taucha Column-Mounted Jib Crane – Load capacity 800 kg Column jib crane with pivoting jib and trolley, ideal for workshop and production areas. Taucha Column-Mounted Jib Crane – Load capacity 800 kg (Double Jib) Column jib crane with two opposing jib arms, suitable for servicing two workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with electric chain hoist, ideal for lighter lifting tasks. Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Jib Crane – Load capacity approx. 315 kg Wall-mounted jib crane with Demag electric chain hoist, suitable for workstations with limited space. Taucha Column-Mounted Jib Crane – Load capacity 250 kg Compact column-mounted jib crane for light loads. Taucha Column-Mounted Jib Crane CS KD 250-6 – Load capacity 250 kg Column-mounted jib crane with pivoting jib and electric chain hoist. Liftket Column-Mounted Jib Crane – Load capacity 250 kg Column jib crane with Liftket electric chain hoist for assembly tasks. Taucha Column-Mounted Jib Crane – Load capacity 200 kg Lhedpfeyt Hc Dsx Ancjl Column jib crane for light material handling. Taucha Column-Mounted Jib Crane – Load capacity 125 kg Lightweight column jib crane for smaller components and tools. Taucha Column-Mounted Jib Crane – Load capacity 100 kg Compact workshop crane for light loads. Taucha Column-Mounted Jib Crane – Load capacity 50 kg Very light jib crane for small lifting applications.

Condition: used, overall weight: 16,000 kg, first registration: 01/1999, loading space length: 5,394 mm, loading space width: 2,489 mm, loading space height: 2,576 mm, Year of construction: 1999, GLEICH VEHICLE CONSTRUCTION PR.+PL. ? ATLAS AK 190.1 ? 16.3M CRANE? ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST 2 UNITS AVAILABLE / 1 WITH FASSI CRANE / 1 WITH ATLAS CRANE ----VEHICLE EQUIPMENT ----VEHICLE DATA GROSS VEHICLE WEIGHT: 16,000 KG OVERALL LENGTH: 7,450 MM ----CRANE PLATFORM MOUNTING POINTS: APPROX. 5.86 M ----CRANE SUPERSTRUCTURE ATLAS CRANE MODEL: AK 190.1 A4 YEAR OF MANUFACTURE: 1999 MAXIMUM WORKING PRESSURE: 300 BAR MAXIMUM LIFTING CAPACITY AT 2.2 M OUTREACH: APPROX. 6,550 TO 7,400 KG MAXIMUM OUTREACH: 16.3 M WITH APPROX. 710 TO 770 KG LIFTING CAPACITY CRANE OPERATED VIA SEPARATE DIESEL ENGINE ----BODY FLATBED WITH CURTAIN SIDE Lsdpex Sbckefx Ancehl MANUFACTURER: Gleich Fahrzeugbau GmbH FLOOR MADE OF APPROX. 30 MM WATERPROOF BONDED FILM FACED PLYWOOD SIDE PANEL HEIGHT: 800 MM SIDE WALLS FOLDABLE AND REMOVABLE FIXED FRONT WALL REAR WITH DOUBLE DOORS AND BAR LOCKING MECHANISM LASHING POINTS INTEGRATED INTO EDGE PROFILE SUBFRAME MADE OF STEEL, AUXILIARY FRAME ACCORDING TO DIN EN 283 284 ----TARP/CURTAIN ROOF COLOUR APPROX. RAL 9010 SLIDING CURTAIN LIGHT GREY SLIDING ROOF, SIDEWAYS OPENING FRONT AND REAR ----INTERNAL DIMENSIONS LENGTH: 5.4 M HEIGHT: 2.57 M WIDTH: 2.49 M ----CONDITION UVV INSPECTION OF LOADING CRANE PERFORMED NO SAFETY-RELATED DEFECTS FOUND CRANE FULLY FUNCTIONAL CRANE REMOTE CONTROL AVAILABLE ----EXPORT SALES ONLY WITH DEPOSIT (MINIMUM 500 – 2000 €) EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 € CUSTOMS EXPORT CLEARANCE (EXW) WITHIN 10 MIN. (APPROVED EXPORTER) 5-DAY, 30-DAY PLATES, AND 17–21 DAYS AUSTRIAN PLATES, EURO 1 VEHICLE RESERVATIONS ONLY VIA E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least 500.00 € / 1,000.00 € is required for sales to EU or third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Subject to changes, errors, and prior sale! See more vehicles on our homepage: Sale is exclusively subject to our terms and conditions – see homepage. Important note – Important information: Despite careful verification of all details in our listing, errors may occur. Some of these may be due to transmission errors in the systems of the various platform providers. Therefore, all specifications are made without guarantee and do not represent legally binding characteristics. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information provided for the initiation of a contract. All details are given without guarantee and do not constitute warranted characteristics.